Polysaccharide functionalization reduces lipid vesicle stiffness.

The biophysical properties of lipid vesicles are important for their stability and integrity, key parameters that control the performance when these vesicles are used for drug delivery. The vesicle properties are determined by the composition of lipids used to form the vesicle. However, for a given lipid composition, they can also be tailored by tethering polymers to the membrane. Typically, synthetic polymers like polyethyleneglycol are used to increase vesicle stability, but the use of polysaccharides in this context is much less explored. Here, we report a general method for functionalizing lipid vesicles with polysaccharides by binding them to cholesterol. We incorporate the polysaccharides on the outer membrane leaflet of giant unilamellar vesicles (GUVs) and investigate their effect on membrane mechanics using micropipette aspiration. We find that the presence of the glycolipid functionalization produces an unexpected softening of GUVs with fluid-like membranes. By contrast, the functionalization of GUVs with polyethylene glycol does not reduce their stretching modulus. This work provides the potential means to study membrane-bound meshworks of polysaccharides similar to the cellular glycocalyx; moreover, it can be used for tuning the mechanical properties of drug delivery vehicles.

Calcium-triggered fusion of lipid membranes is enabled by amphiphilic nanoparticles.

Lipid membrane fusion is an essential process for a number of critical biological functions. The overall process is thermodynamically favorable but faces multiple kinetic barriers along the way. Inspired by nature's engineered proteins such as SNAP receptor [soluble N-ethylmale-imide-sensitive factor-attachment protein receptor (SNARE)] complexes or viral fusogenic proteins that actively promote the development of membrane proximity, nucleation of a stalk, and triggered expansion of the fusion pore, here we introduce a synthetic fusogen that can modulate membrane fusion and equivalently prime lipid membranes for calcium-triggered fusion. Our fusogen consists of a gold nanoparticle functionalized with an amphiphilic monolayer of alkanethiol ligands that had previously been shown to fuse with lipid bilayers. While previous efforts to develop synthetic fusogens have only replicated the initial steps of the fusion cascade, we use molecular simulations and complementary experimental techniques to demonstrate that these nanoparticles can induce the formation of a lipid stalk and also drive its expansion into a fusion pore upon the addition of excess calcium. These results have important implications in general understanding of stimuli-triggered fusion and the development of synthetic fusogens for biomedical applications.

Microfluidic fabrication of vesicles with hybrid lipid/nanoparticle bilayer membranes.

Hybrid lipid/nanoparticle membranes are suitable model systems both to study the complex interactions between nanoparticles and biological membranes, and to demonstrate technological concepts in cellular sensing and drug delivery. Unfortunately, embedding nanoparticles into the bilayer membrane of lipid vesicles is challenging due to the poor control over the vesicle fabrication process of conventional methodologies and the fragility of the modified lipid bilayer assembly. Here, the utility of water-in-oil-in-water double emulsion drops with ultrathin oil shells as templates to form vesicles with hybrid lipid/nanoparticle membranes is reported. Moreover, upon bilayer formation, which occurs through dewetting of the oil solvent from the double emulsion drops, a phase separation is observed in the vesicle membrane, with solid-like nanoparticle-rich microdomains segregated into a continuous fluid-like nanoparticle-poor phase. This phase coexistence evidences the complex nature of the interactions between nanoparticles and lipid membranes. In this context, this microfluidic-assisted fabrication strategy may play a crucial role in thoroughly understanding such interactions given the uniform membrane properties of the resulting productions. Furthermore, the high encapsulation efficiency of both the vesicle membrane and core endows these vesicles with great potential for sensing applications and drug delivery.

One-pot system for synthesis, assembly, and display of functional single-span membrane proteins on oil-water interfaces.

Single-span membrane proteins (ssMPs) represent approximately one-half of all membrane proteins and play important roles in cellular communications. However, like all membrane proteins, ssMPs are prone to misfolding and aggregation because of the hydrophobicity of transmembrane helices, making them difficult to study using common aqueous solution-based approaches. Detergents and membrane mimetics can solubilize membrane proteins but do not always result in proper folding and functionality. Here, we use cell-free protein synthesis in the presence of oil drops to create a one-pot system for the synthesis, assembly, and display of functional ssMPs. Our studies suggest that oil drops prevent aggregation of some in vitro-synthesized ssMPs by allowing these ssMPs to localize on oil surfaces. We speculate that oil drops may provide a hydrophobic interior for cotranslational insertion of the transmembrane helices and a fluidic surface for proper assembly and display of the ectodomains. These functionalized oil drop surfaces could mimic cell surfaces and allow ssMPs to interact with cell surface receptors under an environment closest to cell-cell communication. Using this approach, we showed that apoptosis-inducing human transmembrane proteins, FasL and TRAIL, synthesized and displayed on oil drops induce apoptosis of cultured tumor cells. In addition, we take advantage of hydrophobic interactions of transmembrane helices to manipulate the assembly of ssMPs and create artificial clusters on oil drop surfaces. Thus, by coupling protein synthesis with self-assembly at the water-oil interface, we create a platform that can use recombinant ssMPs to communicate with cells.

Microfluidic Fabrication of Pluronic Vesicles with Controlled Permeability.

Block copolymers with a low hydrophilic-to-lipophilic balance form membranes that are highly permeable to hydrophilic molecules. Polymersomes with this type of membrane enable the controllable release of molecules without membrane rupture. However, these polymersomes are difficult to assemble because of their low hydrophobicity. Here, we report a microfluidic approach to the production of these polymersomes using double-emulsion drops with ultrathin shells as templates. The small thickness of the middle oil phase enables the attraction of the hydrophobic blocks of the polymers adsorbed at each of the oil/water interfaces of the double emulsions; this results in the dewetting of the oil from the surface of the innermost water drops of the double emulsions and the ultimate formation of the polymersome. This approach to polymersome fabrication enables control of the vesicle size and results in the efficient encapsulation of hydrophilic ingredients that can be released through the polymer membrane without membrane rupture. We apply our approach to the fabrication of Pluronic L121 vesicles and characterize the permeability of their membranes. Furthermore, we show that membrane permeability can be tuned by blending different Pluronic polymers. Our work thus describes a route to producing Pluronic vesicles that are useful for the controlled release of hydrophilic ingredients.

Ultrathin shell double emulsion templated giant unilamellar lipid vesicles with controlled microdomain formation.

A microfluidic approach is reported for the high-throughput, continuous production of giant unilamellar vesicles (GUVs) using water-in-oil-in-water double emulsion drops as templates. Importantly, these emulsion drops have ultrathin shells; this minimizes the amount of residual solvent that remains trapped within the GUV membrane, overcoming a major limitation of typical microfluidic approaches for GUV fabrication. This approach enables the formation of microdomains, characterized by different lipid compositions and structures within the GUV membranes. This work therefore demonstrates a straightforward and versatile approach to GUV fabrication with precise control over the GUV size, lipid composition and the formation of microdomains within the GUV membrane.

Microfluidic fabrication of perfluorohexane-shelled double emulsions for controlled loading and acoustic-triggered release of hydrophilic agents.

The ability of low boiling point liquid perfluorocarbons (PFCs) to undergo a phase change from a liquid to a gas upon ultrasound irradiation makes PFC-based emulsions promising vehicles for triggered delivery of payloads. However, loading hydrophilic agents into PFC-based emulsions is difficult due to their insolubility in PFC. Here, we address this challenge by taking advantage of microfluidic technologies to fabricate double emulsions consisting of large aqueous cores and a perfluorohexane (PFH) shell, thus yielding high loading capacities for hydrophilic agents. Using this technology, we efficiently encapsulate a model hydrophilic agent within the emulsions and study its response to ultrasound irradiation. Using a combination of optical and acoustic imaging methods, we observe payload release upon acoustic vaporization of PFH. Our work demonstrates the utility of microfluidic techniques for controllably loading hydrophilic agents into PFH-based emulsions, which have great potential for acoustically triggered release.

Adsorption, organization, and rheology of catanionic layers at the air/water interface.

We have investigated the adsorption and organization at the air/water interface of catanionic molecules released from a dispersion of solid-like catanionic vesicles composed of myristic acid and cetyl trimethylammonium chloride at the 2:1 ratio. These vesicles were shown recently to be promising foam stabilizers. Using Brewster angle microscopy, we observed the formation of a catanionic monolayer at the air/water interface composed of liquid-condensed domains in a liquid-expanded matrix. Further adsorption of catanionic molecules forced them to pack, thereby forming a very dense monolayer that prevented further vesicle rupture by avoiding contact of the vesicles with air. Moreover, confocal fluorescence microscopy revealed the presence of layers of intact vesicles that were progressively creaming toward this catanionic monolayer; the surface tension of the vesicle dispersion remained constant upon creaming. The catanionic monolayer behaved as a soft glassy material, an amorphous solid with time- and temperature-dependent properties. Using interfacial oscillatory rheology, we found that the monolayer relaxed mechanical stresses in seconds and melted at a temperature very close to the melting transition temperature of the vesicle bilayers. These results have potential application in the design of smart foams that have temperature-tunable stability.

Shear and compression rheology of Langmuir monolayers of natural ceramides: solid character and plasticity.

The present work addresses the fundamental question of membrane elasticity of ceramide layers with a special focus on the plastic regime. The compression and shear viscoelasticity of egg-ceramide Langmuir monolayers were investigated using oscillatory surface rheology in the linear regime and beyond. High compression and shear moduli were measured at room temperature-a clear signature for a solid behavior. At deformations larger than one per mill, egg-ceramide monolayers display plastic features characterized by a decrease of the storage modulus followed by a viscous regime typical of fluid lipids. This behavior is accompanied by a marked decrease of the loss modulus with increasing stress above a yield point. The results permit to univocally classify ceramide monolayers as 2D solids able to undergo plastic deformations, at the difference of typical fluid lipid monolayers. These unusual features are likely to have consequences in the mechanical behavior of ceramide-rich emplacements in biological membranes.

Aqueous Two-Phase Systems within Selectively Permeable Vesicles.

An aqueous two-phase system (ATPS) encapsulated within a vesicle organizes the vesicle core as two coexisting phases that partition encapsulated solutes. Here, we use microfluidic technologies to produce vesicles that efficiently encapsulate mixtures of macromolecules, providing a versatile platform to determine the phase behavior of ATPSs. Moreover, we use compartmentalized vesicles to investigate how membrane permeability affects the dynamics of the encapsulated ATPS. Designing a membrane selectively permeable to one of the components of the ATPS, we show that out-of-equilibrium phase separations formed by a rapid outflow of water can be spontaneously reversed by a slower outflow of the permeating component across the vesicle membrane. This dynamics may be exploited advantageously by cells to separate and connect metabolic and signaling routes within their nucleoplasm or cytoplasm depending on external conditions.

Morphometric image analysis of giant vesicles: a new tool for quantitative thermodynamics studies of phase separation in lipid membranes.

We have developed a strategy to determine lengths and orientations of tie lines in the coexistence region of liquid-ordered and liquid-disordered phases of cholesterol containing ternary lipid mixtures. The method combines confocal-fluorescence-microscopy image stacks of giant unilamellar vesicles (GUVs), a dedicated 3D-image analysis, and a quantitative analysis based in equilibrium thermodynamic considerations. This approach was tested in GUVs composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine/1,2-palmitoyl-sn-glycero-3-phosphocholine/cholesterol. In general, our results show a reasonable agreement with previously reported data obtained by other methods. For example, our computed tie lines were found to be nonhorizontal, indicating a difference in cholesterol content in the coexisting phases. This new, to our knowledge, analytical strategy offers a way to further exploit fluorescence-microscopy experiments in GUVs, particularly retrieving quantitative data for the construction of three lipid-component-phase diagrams containing cholesterol.

Antibubble dynamics: the drainage of an air film with viscous interfaces.

An antibubble is a spherical air film that is immersed in a surfactant mixture and drains under the action of hydrostatic pressure. A dynamical model of this film is proposed that accounts for the surface shear viscosity effects in the case of purely viscous interfaces, which applies for surfactants whose adsorption rate is much larger than advection rate and at a concentration much above the critical micelle concentration. Our model shows that the lifetime of the antibubbles in this case increases with surface shear viscosity, denoted ε, whose value is measured independently, all in agreement with experimental measurements. We also found that the critical thickness, h(c), at film rupture due to van der Waals interactions slightly depends on the surface shear viscosity, namely h(c) ∝ ε(1/6).

Solid character of membrane ceramides: a surface rheology study of their mixtures with sphingomyelin.

The compression and shear viscoelasticities of egg-ceramide and its mixtures with sphingomyelin were investigated using oscillatory surface rheology performed on Langmuir monolayers. We found high values for the compression and shear moduli for ceramide, compatible with a solid-state membrane, and extremely high surface viscosities when compared to typical fluid lipids. A fluidlike rheological behavior was found for sphingomyelin. Lateral mobilities, measured from particle tracking experiments, were correlated with the monolayer viscosities through the usual hydrodynamic relationships. In conclusion, ceramide increases the solid character of sphingomyelin-based membranes and decreases their fluidity, thus drastically decreasing the lateral mobilities of embedded objects. This mechanical behavior may involve important physiological consequences in biological membranes containing ceramides.

Stiffening effect of cholesterol on disordered lipid phases: a combined neutron spin echo + dynamic light scattering analysis of the bending elasticity of large unilamellar vesicles.

In this study, the center-of-mass diffusion and shape fluctuations of large unilamellar 1-palmitoyl-2-oleyl-sn-glycero-phosphatidylcholine vesicles prepared by extrusion are studied by means of neutron spin echo in combination with dynamic light scattering. The intermediate scattering functions were measured for several different values of the momentum transfer, q, and for different cholesterol contents in the membrane. The combined analysis of neutron spin echo and dynamic light scattering data allows calculation of the bending elastic constant, kappa, of the vesicle bilayer. A stiffening effect monitored as an increase of kappa with increasing cholesterol molar ratio is demonstrated by these measurements.

Single-step assembly of asymmetric vesicles.

Asymmetric vesicles are membranes in which amphiphiles are asymmetrically distributed between each membrane leaflet. This asymmetry dictates chemical and physical properties of these vesicles, enabling their use as more realistic models of biological cell membranes, which also are asymmetric, and improves their potential for drug delivery and cosmetic applications. However, their fabrication is difficult as the self-assembly of amphiphiles always leads to symmetric vesicles. Here, we report the use of water-in-oil-in-oil-in-water triple emulsion drops to direct the assembly of the two leaflets to form asymmetric vesicles. Different compositions of amphiphiles are dissolved in each of the two oil shells of the triple emulsion; the amphiphiles diffuse to the interfaces and adsorb differentially at each of the two oil/water interfaces of the triple emulsion. These middle oil phases dewet from the innermost water cores of the triple emulsion drops, leading to the formation of membranes with degrees of asymmetry up to 70%. The triple emulsion drops are fabricated using capillary microfluidics, enabling production of highly monodisperse drops at rates as high as 300 Hz. Vesicles produced by this method can very efficiently encapsulate many different ingredients; this further enhances the utility of asymmetric vesicles as artificial cells, bioreactors and delivery vehicles.

Nonlinear dilational mechanics of Langmuir lipid monolayers: a lateral diffusion mechanism.

We propose a theoretical model for the nonlinear mechanical response of Langmuir lipid monolayers subjected to a dilational in-plane deformation. Lateral diffusion in conjunction with free convection has been considered to drive nonlinear mass transport in Langmuir lipid monolayers. The present model combines the conservative dynamical equations for lipid transport along the monolayer plane together with a material relationship accounting for nonlinear hypoelasticity, as experimentally observed from high-strain rheological measurements [Hilles, Adv. Colloid Interface Sci. 122, 67 (2007)]. The dynamical equations have been resolved for oscillatory nonlinear motion, the theoretical spectral amplitudes being found in quantitative agreement with the experimental values obtained from surface rheology experiments performed in Langmuir monolayers of two different lipid systems, namely DPPC and native E. Coli lipids. The presence of micrometer-sized phase coexistence domains in these lipid systems has been claimed to pump diffusive transport along the monolayer plane. This dynamical scenario defines a relaxation regime compatible with the observed nonlinear mechanical behavior.

Emulsion templated vesicles with symmetric or asymmetric membranes.

Emulsion droplets with well-controlled topologies are used as templates for forming vesicles with either symmetric or asymmetric membranes. This review summarizes the available technology to produce these templates, the strategies and critical parameters involved in the transformation of emulsion droplets into vesicles, and the properties of the generated vesicles, with a special focus on the composition and material distribution of the vesicle membrane. Here, we also address limitations in the field and point to future fundamental and applied research in the area.

Dissipative dynamics of fluid lipid membranes enriched in cholesterol.

Cholesterol is an intriguing component of fluid lipid membranes: It makes them stiffer but also more fluid. Despite the enormous biological significance of this complex dynamical behavior, which blends aspects of membrane elasticity with viscous friction, their mechanical bases remain however poorly understood. Here, we show that the incorporation of physiologically relevant contents of cholesterol in model fluid membranes produces a fourfold increase in the membrane bending modulus. However, the increase in the compression rigidity that we measure is only twofold; this indicates that cholesterol increases coupling between the two membrane leaflets. In addition, we show that although cholesterol makes each membrane leaflet more fluid, it increases the friction between the membrane leaflets. This dissipative dynamics causes opposite but advantageous effects over different membrane motions: It allows the membrane to rearrange quickly in the lateral dimension, and to simultaneously dissipate out-of-plane stresses through friction between the two membrane leaflets. Moreover, our results provide a clear correlation between coupling and friction of membrane leaflets. Furthermore, we show that these rigid membranes are optimal to resist slow deformations with minimum energy dissipation; their optimized stability might be exploited to design soft technological microsystems with an encoded mechanics, vesicles or capsules for instance, useful beyond classical applications as model biophysical systems.

Dispersing hydrophobic natural colourant ß-carotene in shellac particles for enhanced stability and tunable colour.

Colour is one of the most important visual attributes of food and is directly related to the perception of food quality. The interest in natural colourants, especially ß-carotene that not only imparts colour but also has well-documented health benefits, has triggered the research and development of different protocols designed to entrap these hydrophobic natural molecules to improve their stability against oxidation. Here, we report a versatile microfluidic approach that uses single emulsion droplets as templates to prepare microparticles loaded with natural colourants. The solution of ß-carotene and shellac in the solvent is emulsified by microfluidics into droplets. Upon solvent diffusion, ß-carotene and shellac co-precipitates, forming solid microparticles of ß-carotene dispersed in the shellac polymer matrix. We substantially improve the stability of ß-carotene that is protected from oxidation by the polymer matrix and achieve different colour appearances by loading particles with different ß-carotene concentrations. These particles demonstrate great promise for practical use in natural food colouring.

Microfluidic assembly of multistage porous silicon-lipid vesicles for controlled drug release.

A reliable microfluidic platform for the generation of stable and monodisperse multistage drug delivery systems is reported. A glass-capillary flow-focusing droplet generation device was used to encapsulate thermally hydrocarbonized porous silicon (PSi) microparticles into the aqueous cores of double emulsion drops, yielding the formation of a multistage PSi-lipid vesicle. This composite system enables a large loading capacity for hydrophobic drugs.