Fluorinated Co-Solvents Enable Excellent Performances of Practical Cells Comprising LixSiO-Graphite Composite Anodes and LiNi0.89Co0.05Mn0.05Al0.01O2 (NCMA) Cathodes.

Li-ion batteries based on high specific capacity LixSiO-Graphite anodes and LiNi0.89Co0.05 Mn0.05Al0.01O2 (NCMA) cathodes may have numerous practical applications owing to high energy density without a necessary compromise on safety. SiO, which is an attractive Li insertion anode material, offers more cycling stability than Si and a higher capacity than graphite. Therefore, a new trend has emerged for developing composite C-Si anodes, possessing the excellent cyclability of graphite coupled with high capacity SiO. The composite structure described herein prevents the volume expansion of SiO and maintains the structural integrity during prolonged cycling. However, graphite electrodes suffer from exfoliation in propylene carbonate (PC) based electrolyte solutions, which avoids well known safety benefits related to a possible use of PC based electrolyte solutions in all kinds of Li batteries. Herein, it is reported that trifluoro propylene carbonate (TFPC) is compatible with graphite anodes. New electrolyte formulations are developed and tested containing fluorinated co-solvents and compared the performance of several electrolyte solutions, including conventional alkyl carbonates-based solutions in full Li-ion cells, which included LixSiO-Graphite anodes and LiNi0.89Co0.05Mn0.05Al0.01O2 (NCMA) cathodes. Cells with new electrolyte solutions developed herein demonstrated nearly twice capacity retention in prolonged cycling experiments compared to similar reference cells containing conventional electrolyte solutions.

Design of Solid Polycationic Electrolyte to Enable Durable Chloride-Ion Batteries.

The high energy density and cost-effectiveness of chloride-ion batteries (CIBs) make them promising alternatives to lithium-ion batteries. However, the development of CIBs is greatly restricted by the lack of compatible electrolytes to support cost-effective anodes. Herein, we present a rationally designed solid polycationic electrolyte (SPE) to enable room-temperature chloride-ion batteries utilizing aluminum (Al) metal as an anode. This SPE endows the CIB configuration with improved air stability and safety (i.e. free of flammability and liquid leakage). A high ionic conductivity (1.3×10-2 S cm-1 at 25 °C) has been achieved by the well-tailored coordination structure of the SPE. Meanwhile, the solid polycationic electrolyte ensures stable electrodes|electrolyte interfaces, which effectively inhibit the growth of dendrites on the Al anodes and degradation of the FeOCl cathodes. The Al|SPE|FeOCl chloride-ion batteries showcased a high discharge capacity around 250 mAh g-1 (based on the cathodes) and extended lifespan. Our electrolyte design opens a new avenue for developing low-cost chloride-ion batteries.

Stable High-Capacity Elemental Sulfur Cathodes with Simple Process for Lithium Sulfur Batteries.

Lithium sulfur batteries are suitable for drones due to their high gravimetric energy density (2600 Wh/kg of sulfur). However, on the cathode side, high specific capacity with high sulfur loading (high areal capacity) is challenging due to the poor conductivity of sulfur. Shuttling of Li-sulfide species between the sulfur cathode and lithium anode also limits specific capacity. Sulfur-carbon composite active materials with encapsulated sulfur address both issues but require expensive processing and have low sulfur content with limited areal capacity. Proper encapsulation of sulfur in carbonaceous structures along with active additives in solution may largely mitigate shuttling, resulting in cells with improved energy density at relatively low cost. Here, composite current collectors, selected binders, and carbonaceous matrices impregnated with an active mass were used to award stable sulfur cathodes with high areal specific capacity. All three components are necessary to reach a high sulfur loading of 3.8 mg/cm2 with a specific/areal capacity of 805 mAh/g/2.2 mAh/cm2. Good adhesion between the carbon-coated Al foil current collectors and the composite sulfur impregnated carbon matrices is mandatory for stable electrodes. Swelling of the binders influenced cycling retention as electroconductivity dominated the cycling performance of the Li-S cells comprising cathodes with high sulfur loading. Composite electrodes based on carbonaceous matrices in which sulfur is impregnated at high specific loading and non-swelling binders that maintain the integrated structure of the composite electrodes are important for strong performance. This basic design can be mass produced and optimized to yield practical devices.

Is "Water in Salt" Electrolytes the Ultimate Solution? Achieving High Stability of Organic Anodes in Diluted Electrolyte Solutions Via a Wise Anions Selection.

The introduction of the water-in-salt (WIS) electrolytes concept to prevent water splitting and widen the electrochemical stability window, has spurred extensive research efforts toward development of improved aqueous batteries. The successful implementation of these electrolyte solutions in many electrochemical systems shifts the focus from diluted to WIS electrolyte solutions. Considering the high costs and the tendency of these nearly saturated solutions to crystallize, this trend can be carefully re-evaluated. Herein we show that the stability of organic electrodes comprising the active material perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA), is strongly influenced by the solvation character of the anions rather than the concentration of the electrolyte solution. Even though the charging process of PTCDA involves solely insertion of cations (i.e., principal counter-ions), surprisingly, the dominant factor influencing its electrochemical performance, including long-term electrode stability, is the type of the co-ions (i.e., electrolytic anions). Using systematic electrochemical analysis combined with theoretical simulations, we show that the selection of kosmotropic anions results in fast fading of the PTCDA anodes, while a selection of chaotropic anions leads to excellent stability, even at electrolytes concentrations as low as 0.2 M. These findings provide a new conceptual approach for designing advanced electrolyte solutions for aqueous batteries.

Polyimide Compounds For Post-Lithium Energy Storage Applications.

The exploration of cathode and anode materials that enable reversible storage of mono and multivalent cations has driven extensive research on organic compounds. In this regard, polyimide (PI)-based electrodes have emerged as a promising avenue for the development of post-lithium energy storage systems. This review article provides a comprehensive summary of the syntheses, characterizations, and applications of PI compounds as electrode materials capable of hosting a wide range of cations. Furthermore, the review also delves into the advancements in PI based solid state batteries, PI-based separators, current collectors, and their effectiveness as polymeric binders. By highlighting the key findings in these areas, this review aims at contributing to the understanding and advancement of PI-based structures paving the way for the next generation of energy storage systems.

Bridging 1D Inorganic and Organic Synthesis to Fabricate Ultrathin Bismuth-Based Nanotubes with Controllable Size as Anode Materials for Secondary Li Batteries.

The growth of ultrathin 1D inorganic nanomaterials with controlled diameters remains challenging by current synthetic approaches. A polymer chain templated method is developed to synthesize ultrathin Bi2 O2 CO3 nanotubes. This formation of nanotubes is a consequence of registry between the electrostatic absorption of functional groups on polymer template and the growth habit of Bi2 O2 CO3 . The bulk bismuth precursor is broken into nanoparticles and anchored onto the polymer chain periodically. These nanoparticles react with the functional groups and gradually evolve into Bi2 O2 CO3 nanotubes along the chain. 5.0 and 3.0 nm tubes with narrow diameter deviation are synthesized by using branched polyethyleneimine and polyvinylpyrrolidone as the templates, respectively. Such Bi2 O2 CO3 nanotubes show a decent lithium-ion storage capacity of around 600 mA h g-1 at 0.1 A g-1 after 500 cycles, higher than other reported bismuth oxide anode materials. More interestingly, the Bi materials developed herein still show decent capacity at very low temperatures, that is, around 330 mA h g-1 (-22 °C) and 170 mA h g-1 (-35 °C) after 75 cycles at 0.1 A g-1 , demonstrating their promising potential for practical application in extreme conditions.

Lithium-Oxygen Batteries and Related Systems: Potential, Status, and Future.

The goal of limiting global warming to 1.5 °C requires a drastic reduction in CO2 emissions across many sectors of the world economy. Batteries are vital to this endeavor, whether used in electric vehicles, to store renewable electricity, or in aviation. Present lithium-ion technologies are preparing the public for this inevitable change, but their maximum theoretical specific capacity presents a limitation. Their high cost is another concern for commercial viability. Metal-air batteries have the highest theoretical energy density of all possible secondary battery technologies and could yield step changes in energy storage, if their practical difficulties could be overcome. The scope of this review is to provide an objective, comprehensive, and authoritative assessment of the intensive work invested in nonaqueous rechargeable metal-air batteries over the past few years, which identified the key problems and guides directions to solve them. We focus primarily on the challenges and outlook for Li-O2 cells but include Na-O2, K-O2, and Mg-O2 cells for comparison. Our review highlights the interdisciplinary nature of this field that involves a combination of materials chemistry, electrochemistry, computation, microscopy, spectroscopy, and surface science. The mechanisms of O2 reduction and evolution are considered in the light of recent findings, along with developments in positive and negative electrodes, electrolytes, electrocatalysis on surfaces and in solution, and the degradative effect of singlet oxygen, which is typically formed in Li-O2 cells.

High Energy Density Rechargeable Batteries Based on Li Metal Anodes. The Role of Unique Surface Chemistry Developed in Solutions Containing Fluorinated Organic Co-solvents.

To date, lithium ion batteries are considered as a leading energy storage and conversion technology, ensuring a combination of high energy and power densities and prolonged cycle life. A critical point for elaboration of high energy density secondary Li batteries is the use of high specific capacity positive and negative electrodes. Among anode materials, Li metal anodes are considerably superior due to having the highest theoretical specific capacity (3860 mAh g-1) and lowest negative redox potential (-3.040 V vs a standard hydrogen electrode). Combination of Li metal anodes with Li[NiCoM]O2-layered cathodes with a high stable specific capacity of about 200 up to 250 mAh g-1 is particularly attractive. The development of advanced electrolyte solutions which ensure effective passivation of the electrodes' surfaces is of critical importance. Considerable efforts have been focused on fluorinated organic co-solvents and specifically fluoroethylene carbonate (FEC) due to the formation of thin, flexible Li-ions-conducting surface films with excellent protective properties. However, in the FEC-based solutions, detrimental "cross talk" between the Li anodes and the Li[NiCoM]O2 cathodes leads to worsening of the passivation of Li metal anodes, consumption of the electrolyte solutions, and limited cycle life of full Li|Li[NiCoM]O2 cells cycled with a low amount of the electrolyte solution and practical cycling parameters. The addition of difluoroethylene carbonate (DFEC) co-solvent with lower LUMO energy leads to a significant improvement in the cycling behavior of full cells. Using fluorinated co-solvents possessing synergistic effects is very promising and paves the way for developing rechargeable batteries with the highest energy density.

Can Anions Be Inserted into MXene?

Despite the continuous progress in the research and development of Ti3C2Tx (MXene) electrodes for high-power batteries and supercapacitor applications, the role of the anions in the electrochemical energy storage and their ability to intercalate between the MXene sheets upon application of positive voltage have not been clarified. A decade after the discovery of MXenes, the information about the possibility of anion insertion into the restacked MXene electrode is still being questioned. Since the positive potential stability range in diluted aqueous electrolytes is severely limited by anodic oxidation of the Ti, the possibility of anion insertion was evaluated in concentrated aqueous electrolyte solutions and aprotic electrolytes as well. To address this issue, we have conducted in situ gravimetric electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) measurements in highly concentrated LiCl and LiBr electrolytes, which enable a significant extension of the operation range of the MXene electrodes toward positive potentials. Also, halogens are among the smallest anions and should be easier to intercalate between MXene layers, in comparison to multiatomic anions. On the basis of mass change variations in the positive voltage range and complementary density functional theory calculations, it was demonstrated that insertion of anionic species into MXene, within the range of potentials of interest for capacitive energy storage, is not likely to occur. This can be explained by the strong negative charge on Ti3C2Tx sheets terminated by functional groups.

Metal-Metal Bond in the Light of Pauling's Rules.

About 70 years ago, in the framework of his theory of chemical bonding, Pauling proposed an empirical correlation between the bond valences (or effective bond orders (BOs)) and the bond lengths. Till now, this simple correlation, basic in the bond valence model (BVM), is widely used in crystal chemistry, but it was considered irrelevant for metal-metal bonds. An extensive analysis of the quantum chemistry data computed in the last years confirms very well the validity of Pauling's correlation for both localized and delocalized interactions. This paper briefly summarizes advances in the application of the BVM for compounds with TM-TM bonds (TM = transition metal) and provides further convincing examples. In particular, the BVM model allows for very simple but precise calculations of the effective BOs of the TM-TM interactions. Based on the comparison between formal and effective BOs, we can easily describe steric and electrostatic effects. A possible influence of these effects on materials stability is discussed.

Redox Potential and Crystal Chemistry of Hexanuclear Cluster Compounds.

Most of TM6-cluster compounds (TM = transition metal) are soluble in polar solvents, in which the cluster units commonly remain intact, preserving the same atomic arrangement as in solids. Consequently, the redox potential is often used to characterize structural and electronic features of respective solids. Although a high lability and variety of ligands allow for tuning of redox potential and of the related spectroscopic properties in wide ranges, the mechanism of this tuning is still unclear. Crystal chemistry approach was applied for the first time to clarify this mechanism. It was shown that there are two factors affecting redox potential of a given metal couple: Lever's electrochemical parameters of the ligands and the effective ionic charge of TM, which in cluster compounds differs effectively from the formal value due to the bond strains around TM atoms. Calculations of the effective ionic charge of TMs were performed in the framework of bond valence model, which relates the valence of a bond to its length by simple Pauling relationship. It was also shown that due to the bond strains the charge depends mainly on the atomic size of the inner ligands.

A revisit of the bond valence model makes it universal.

The use of simple, intuitive equations to correlate the geometry of crystal structures with electron descriptors of chemical bonds and material structural stability is a great advantage of the Bond Valence Model (BVM), which is based on Pauling's principles of bond order (BO) conservation and exponential BO/bond length relationship. However, the high potential of BVM to be used as an important analytical tool was overlooked in recent inorganic chemistry due to its empirical character and serious restrictions for its application. Recent quantum chemistry data (BOs and electron densities at the bond critical points, ρc) enable us to establish the validity of the BVM to any type of chemical bonds, as well as a direct BO/ρc relationship. Such a BVM revisit overcomes most of the limitations anticipated previously for the model and thus makes it universal. This Perspective highlights the advance in model development, in particular its application to compounds with metal-metal bonds, which allows us to establish (i) a linear correlation between BOs and stretching force constants used as a measure of the bond strength and (ii) a quantitative description of the steric/electrostatic effects in cluster compounds enabling us to understand their nature and the influence of such effects on structural stability. Thus, using interatomic distances, the simple Pauling equation and empirical constants, it is possible to calculate effective BOs and predict stretching force constants and electron densities at the bond critical points in any complex compound, all of this at zero cost!

In Situ Real-Time Mechanical and Morphological Characterization of Electrodes for Electrochemical Energy Storage and Conversion by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring.

Quartz crystal microbalance with dissipation monitoring (QCM-D) generates surface-acoustic waves in quartz crystal plates that can effectively probe the structure of films, particulate composite electrodes of complex geometry rigidly attached to quartz crystal surface on one side and contacting a gas or liquid phase on the other side. The output QCM-D characteristics consist of the resonance frequency (MHz frequency range) and resonance bandwidth measured with extra-ordinary precision of a few tenths of Hz. Depending on the electrodes stiffness/softness, QCM-D operates either as a gravimetric or complex mechanical probe of their intrinsic structure. For at least 20 years, QCM-D has been successfully used in biochemical and environmental science and technology for its ability to probe the structure of soft solvated interfaces. Practical battery and supercapacitor electrodes appear frequently as porous solids with their stiffness changing due to interactions with electrolyte solutions or as a result of ion intercalation/adsorption and long-term electrode cycling. Unfortunately, most QCM measurements with electrochemical systems are carried out based on a single (fundamental) frequency and, as such, provided that the resonance bandwidth remains constant, are suitable for only gravimetric sensing. The multiharmonic measurements have been carried out mainly on conducting/redox polymer films rather than on typical composite battery/supercapacitor electrodes. Here, we summarize the most recent publications devoted to the development of electrochemical QCM-D (EQCM-D)-based methodology for systematic characterization of mechanical properties of operating battery/supercapacitor electrodes. By varying the electrodes' composition and structure (thin/thick layers, small/large particles, binders with different mechanical properties, etc.), nature of the electrolyte solutions and charging/cycling conditions, the method is shown to be operated in different application modes. A variety of useful electrode-material properties are assessed noninvasively, in situ, and in real time frames of ion intercalation into the electrodes of interest. A detailed algorithm for the mechanical characterization of battery electrodes kept in the gas phase and immersed into the electrolyte solutions has been developed for fast recognition of stiff and viscoelastic materials in terms of EQCM-D signatures treated by the hydrodynamic and viscoelastic models. Working examples of the use of in situ hydrodynamic spectroscopy to characterize stiff rough/porous solids of complex geometry and viscoelastic characterization of soft electrodes are presented. The most demonstrative example relates to the formation of solid electrolyte interphase on Li4Ti5O12 electrodes in the presence of different electrolyte solutions and additives: only a few cycles (an experiment during ∼30 min) were required for screening the electrolyte systems for their ability to form high-quality surface films in experimental EQCM-D cells as compared to 100 cycles (200 h cycling) in conventional coin cells. Thin/small-mass electrodes required for the EQCM-D analysis enable accelerated cycling tests for ultrafast mechanical characterization of these electrodes in different electrolyte solutions. Hence, this methodology can be easily implemented as a highly effective in situ analytical tool in the field of energy storage and conversion.

Improving Amorphous Carbon Anodes for Na Ion Batteries by Surface Treatment of a Presodiated Electrode with Al2O3.

Disordered carbons are promising anode materials for sodium ion batteries. However, a major drawback of these materials is their low coulombic efficiency in the first cycles, which indicates parasitic reactions. Such reactions can be suppressed by alumina coating on the surface of the anodic materials; more ions are then available for electrochemical activity, and less electrolyte solution is lost. On the other hand, some pores and surface edge sites are passivated by the coating and are no longer available for reversible reaction with sodium ions; hence, their contribution is eliminated, leading to reduction in specific capacity. We show herein that electrochemical insertion of sodium ions into carbon anodes prior to alumina coating has a double positive effect on anode perfomances, meaning preventing passivation and maintaining high specific capacity. We show that the artificial layer still prevented parasitic reactions, while the pores and surface edge sites retained electrochemical activity. The capacity values were thus restored and even became higher as a result of preventing the development of a surface layer. Ultraviolet photoelectron spectroscopy measurements assessed the energetic states of the electrodes and confirmed that the alumina coating forms a barrier for interfacial electron transfer from the electrode to the solution at any polarization stage.

Assessing the Strength of Metal-Metal Interactions.

A proper comparison between bond strengths of different atom pairs is relevant only for the same formal bond order (BO) of atomic interactions, e.g., for single bonds, because it is clear that the higher is the BO or the number of the electron pairs responsible of bonding, the stronger is the bond. For the metal-metal interactions, such a comparison of the bond strengths is especially problematic because formal BOs may differ from the effective ones by more than 1 v.u. (valence units). In this paper, we investigated the strength of bonding and its correlation to structural parameters (bond length/BO) for 24 metal-metal pairs. A simple way of the BO and bond-strength analysis was proposed and verified on the transition metal dimers. In contrast to the previous studies, the effective BOs were not calculated from spectroscopic data or related to reference compounds, but determined independently based on the Pauling model and bond valence parameters obtained from recent quantum chemistry data. To characterize the bond strength, we used the force constants based on the available experimental or DFT data of stretching frequencies. A linear correlation between the effective BOs and force constants of the metal-metal bonds, which was confirmed in this work, allows for prediction of the stretching frequencies according to the effective BOs (and/or the bond lengths) and vice versa.

Direct Assessment of Nanoconfined Water in 2D Ti3C2 Electrode Interspaces by a Surface Acoustic Technique.

Although significant progress has been achieved in understanding of ion-exchange mechanisms in the new family of 2D transition metal carbides and nitrides known as MXenes, direct gravimetric assessment of water insertion into the MXene interlayer spaces and mesopores has not been reported so far. Concurrently, the latest research on MXene and Birnessite electrodes shows that nanoconfined water dramatically improves their gravimetric capacity and rate capability. Hence, quantification of the amount of confined water in solvated electrodes is becoming an important goal of energy-related research. Using the recently developed and highly sensitive method of in situ hydrodynamic spectroscopy (based on surface-acoustic probing of solvated interfaces), we provide clear evidence that typical cosmotropic cations (Li+, Mg2+, and Al3+) are inserted into the MXene interspaces in their partially hydrated form, in contrast to the insertion of chaotropic cations (Cs+ and TEA+), which effectively dehydrate the MXene. These new findings provide important information about the charge-storage mechanisms in layered materials by direct quantification and efficient control (management) over the amount of confined fluid in a variety of solvated battery/supercapacitor electrodes. We believe that the proposed monitoring of water content as a function of the nature of ions can be equally applied to solvated biointerfaces, such as the ion channels of membrane proteins.

Bond Order Conservation Principle and Peculiarities of the Metal-Metal Bonding.

Pauling's principles developed later in the bond valence model (BVM) are fundamental in description of bonding in ionic solids and surface phenomena on metals, but applicability of these principles to the metal-metal bonds in the bulk compounds was demonstrated only recently, with a spotlight on the bond valence-bond length correlations. This work is focused on the bond order conservation in cluster compounds and determination of empiric bond valence parameters for the metal-metal bonds, which ensure very simple and reasonably accurate bonding analysis, with zero cost, in any complex cluster compound. Such peculiarities of cluster compounds as matrix effect and nonuniform distribution of the ionic charges (bond valence sums) on the ligands around metal clusters, as well as other important examples of the BVM application to compounds with metal-metal bonds, are discussed.

Bromide Ions Specific Removal and Recovery by Electrochemical Desalination.

Removal and recovery of bromide ions by electro-oxidation and electro-reduction are presented using hybrid physical adsorption and capacitive deionization cells, which contain activated carbon cloth electrodes. This is a proof of concept research with results, which indicate that when comparing the removal and recovery quantities of bromide and chloride ions (starting with the same initial concentration of 0.05 M for both salts), the desalination capacity of the bromide ions is larger by almost 2 orders of magnitude than that of the chloride ions; thus, we obtained specific desalination of bromide ions from a solution containing chloride ions. Removal and recovery of 3.5 mmol of bromide ions were achieved by a working electrode with 1 g of activated carbon cloth, and the calculated energy consumption for the removal and recovery of 1 g of bromide ions was about 2.24 kJ/g.

On the Oxidation State of Manganese Ions in Li-Ion Battery Electrolyte Solutions.

We demonstrate herein that Mn3+ and not Mn2+, as commonly accepted, is the dominant dissolved manganese cation in LiPF6-based electrolyte solutions of Li-ion batteries with lithium manganate spinel positive and graphite negative electrodes chemistry. The Mn3+ fractions in solution, derived from a combined analysis of electron paramagnetic resonance and inductively coupled plasma spectroscopy data, are ∼80% for either fully discharged (3.0 V hold) or fully charged (4.2 V hold) cells, and ∼60% for galvanostatically cycled cells. These findings agree with the average oxidation state of dissolved Mn ions determined from X-ray absorption near-edge spectroscopy data, as verified through a speciation diagram analysis. We also show that the fractions of Mn3+ in the aprotic nonaqueous electrolyte solution are constant over the duration of our experiments and that disproportionation of Mn3+ occurs at a very slow rate.

2,4-Dimethoxy-2,4-dimethylpentan-3-one: An Aprotic Solvent Designed for Stability in Li-O2 Cells.

In this study, we present a new aprotic solvent, 2,4-dimethoxy-2,4-dimethylpentan-3-one (DMDMP), which is designed to resist nucleophilic attack and hydrogen abstraction by reduced oxygen species. Li-O2 cells using DMDMP solutions were successfully cycled. By various analytical measurements, we showed that even after prolonged cycling only a negligible amount of DMDMP was degraded. We suggest that the observed capacity fading of the Li-O2 DMDMP-based cells was due to instability of the lithium anode during cycling. The stability toward oxygen species makes DMDMP an excellent solvent candidate for many kinds of electrochemical systems which involve oxygen reduction and assorted evaluation reactions.