Multivariate Bayesian Optimization of CoO Nanoparticles for CO2 Hydrogenation Catalysis.

The hydrogenation of CO2 holds promise for transforming the production of renewable fuels and chemicals. However, the challenge lies in developing robust and selective catalysts for this process. Transition metal oxide catalysts, particularly cobalt oxide, have shown potential for CO2 hydrogenation, with performance heavily reliant on crystal phase and morphology. Achieving precise control over these catalyst attributes through colloidal nanoparticle synthesis could pave the way for catalyst and process advancement. Yet, navigating the complexities of colloidal nanoparticle syntheses, governed by numerous input variables, poses a significant challenge in systematically controlling resultant catalyst features. We present a multivariate Bayesian optimization, coupled with a data-driven classifier, to map the synthetic design space for colloidal CoO nanoparticles and simultaneously optimize them for multiple catalytically relevant features within a target crystalline phase. The optimized experimental conditions yielded small, phase-pure rock salt CoO nanoparticles of uniform size and shape. These optimized nanoparticles were then supported on SiO2 and assessed for thermocatalytic CO2 hydrogenation against larger, polydisperse CoO nanoparticles on SiO2 and a conventionally prepared catalyst. The optimized CoO/SiO2 catalyst consistently exhibited higher activity and CH4 selectivity (ca. 98%) across various pretreatment reduction temperatures as compared to the other catalysts. This remarkable performance was attributed to particle stability and consistent H* surface coverage, even after undergoing the highest temperature reduction, achieving a more stable catalytic species that resists sintering and carbon occlusion.

An Exceptionally Mild and Scalable Solution-Phase Synthesis of Molybdenum Carbide Nanoparticles for Thermocatalytic CO2 Hydrogenation.

Transition metal carbides (TMCs) have demonstrated outstanding potential for utilization in a wide range of catalytic applications because of their inherent multifunctionality and tunable composition. However, the harsh conditions required to prepare these materials have limited the scope of synthetic control over their physical properties. The development of low-temperature, carburization-free routes to prepare TMCs would unlock the versatility of this class of materials, enhance our understanding of their physical properties, and enable their cost-effective production at industrial scales. Here, we report an exceptionally mild and scalable solution-phase synthesis route to phase-pure molybdenum carbide (α-MoC1-x) nanoparticles (NPs) in a continuous flow millifluidic reactor. We exploit the thermolytic decomposition of Mo(CO)6 in the presence of a surface-stabilizing ligand and a high boiling point solvent to yield MoC1-x NPs that are colloidally stable and resistant to bulk oxidation in air. To demonstrate the utility of this synthetic route to prepare catalytically active TMC NPs, we evaluated the thermochemical CO2 hydrogenation performance of α-MoC1-x NPs dispersed on an inert carbon support. The α-MoC1-x/C catalyst exhibited a 2-fold increase in both activity on a per-site basis and selectivity to C2+ products as compared to the bulk α-MoC1-x analogue.

Pt-Mg, Pt-Ca, and Pt-Zn Lantern Complexes and Metal-Only Donor-Acceptor Interactions.

Pt-based heterobimetallic lantern complexes of the form [PtM(SOCR)4(L)] have been shown previously to form intermolecular metallophilic interactions and engage in antiferromagnetic coupling between lanterns having M atoms with open shell configurations. In order to understand better the influence of the carboxylate bridge and terminal ligand on the electronic structure, as well as the metal-metal interactions within each lantern unit, a series of diamagnetic lantern complexes, [PtMg(SAc)4(OH2)] (1), [PtMg(tba)4(OH2)] (2), [PtCa(tba)4(OH2)] (3), [PtZn(tba)4(OH2)] (4), and a mononuclear control (Ph4P)2[Pt(SAc)4] (5) have been synthesized. Crystallographic data show close Pt-M contacts enforced by the lantern structure in each dinuclear case. 195Pt-NMR spectroscopy of 1-4, (Ph4P)2[Pt(SAc)4] (5), and several previously reported lanterns revealed a strong chemical shift dependence on the identity of the second metal (M), mild influence by the thiocarboxylate ligand (SOCR; R = CH3 (thioacetate, SAc), C6H5 (thiobenzoate, tba)), and modest influence from the terminal ligand (L). Fluorescence spectroscopy has provided evidence for a Pt···Zn metallophilic interaction in [PtZn(SAc)4(OH2)], and computational studies demonstrate significant dative character. In all of 1-4, the short Pt-M distances suggest that metal-only Lewis donor (Pt)-Lewis acceptor (M) interactions could be present. DFT and NBO calculations, however, show that only the Zn examples have appreciable covalent character, whereas the Mg and Ca complexes are much more ionic.

Synthesis of α-MoC1-x Nanoparticles with a Surface-Modified SBA-15 Hard Template: Determination of Structure-Function Relationships in Acetic Acid Deoxygenation.

Surface modification of mesoporous SBA-15 silica generated a hydrophobic environment for a molybdenum diamine (Mo-diamine) precursor solution, enabling direct growth of isolated 1.9±0.4 nm α-MoC1-x nanoparticles (NPs) inside the pores of the support. The resulting NP catalysts are bifunctional, and compared to bulk α-MoC1-x and ß-Mo2 C, the NPs exhibit a greater acid-site:H-site ratio and a fraction of stronger acid sites. The greater acid-site:H-site ratio results in higher decarbonylation (DCO) selectivity during acetic acid hydrodeoxygenation (HDO) reactions, and the stronger acid sites lead to higher activity and ketonization (KET) selectivity at high temperatures. The hard-templating synthetic method could be a versatile route toward carbide NPs of varying size, composition, and phase, on a range of mesoporous oxide supports.

Pt···Pt vs Pt···S contacts between Pt-containing heterobimetallic lantern complexes.

A trio of Pt-based heterobimetallic lantern complexes of the form [(py)PtM(SAc)4(py)] (M = Co, 1; Ni, 2; Zn, 3) with unusual octahedral coordination of Pt(II) was prepared from a reaction of [PtM(SAc)4] with excess pyridine. These dipyridine lantern complexes could be converted to monopyridine derivatives with gentle heat to give the series [PtM(SAc)4(py)] (M = Co, 4; Ni, 5; Zn, 6). An additional family of the form [PtM(SAc)4(pyNH2)] (M = Co, 7; Ni, 8; Zn, 9) was synthesized from reaction of [PtM(SAc)4(OH2)] or [PtM(SAc)4] with 4-aminopyridine. Dimethylsulfoxide and N,N-dimethylformamide were also determined to react with [PtM(SAc)4] (M = Co, Ni), respectively, to give [PtCo(SAc)4(DMSO)](DMSO), 10, and [PtNi(SAc)4(DMF)](DMF), 11. Structural and magnetic data for these compounds and those for two other previously published families, [PtM(tba)4(OH2)] and [PtM(SAc)4(L)], L = OH2, pyNO2, are used to divide the structures among three distinct categories based on Pt···Pt and Pt···S distances. In general, the weaker donors H2O and pyNO2 seem to favor metallophilicity and antiferromagnetic coupling between 3d metal centers. When Pt···S interactions are favored over Pt···Pt ones, no coupling is observed and the pKa of the pyridine donor correlates with the interlantern S···S distance. UV-vis-NIR electronic and (1)H NMR spectra provide complementary characterization as well.

Heterobimetallic lantern complexes that couple antiferromagnetically through noncovalent Pt···Pt interactions.

A series of Pt-based heterobimetallic lantern complexes of the form [PtM(SAc)4(OH2)] (M = Co, 1; Ni, 2; Zn, 3) were prepared using a facile, single-step procedure. These hydrated species were reacted with 3-nitropyridine (3-NO2py) to prepare three additional lantern complexes, [PtM(SAc)4(3-NO2py)] (M = Co, 4; Ni, 5; Zn, 6), or alternatively dried in vacuo to the dehydrated species [PtM(SAc)4] (M = Co, 7; Ni, 8; Zn, 9). The Co- and Ni-containing species exhibit Pt-M bonding in solution and the solid state. In the structurally characterized compounds 1-6, the lantern units form dimers in the solid state via a short Pt···Pt metallophilic interaction. Antiferromagnetic coupling between 3d metal ions in the solid state through noncovalent metallophilic interactions was observed for all the paramagnetic lantern complexes prepared, with J-coupling values of -12.7 cm(-1) (1), -50.8 cm(-1) (2), -6.0 cm(-1) (4), and -12.6 cm(-1) (5). The Zn complexes 3 and 6 also form solid-state dimers, indicating that the formation of short Pt···Pt interactions in these complexes is not predicated on the presence of a paramagnetic 3d metal ion. These contacts and the resultant antiferromagnetic coupling are also not unique to heterobimetallic lantern complexes with axially coordinated H2O or the previously reported thiobenzoate supporting ligand.

Activating Molybdenum Carbide Nanoparticle Catalysts under Mild Conditions Using Thermally Labile Ligands.

Transition-metal carbides are promising low-cost materials for various catalytic transformations due to their multifunctionality and noble-metal-like behavior. Nanostructuring transition-metal carbides offers advantages resulting from the large surface-area-to-volume ratios inherent in colloidal nanoparticle catalysts; however, a barrier for their utilization is removal of the long-chain aliphatic ligands on their surface to access active sites. Annealing procedures to remove these ligands require temperatures greater than the catalyst synthesis and catalytic reaction temperatures and may further result in coking or particle sintering that can reduce catalytic performance. One way to circumvent this problem is by replacing the long-chain aliphatic ligands with smaller ligands that can be easily removed through low-temperature thermolytic decomposition. Here, we present the exchange of native oleylamine ligands on colloidal α-MoC1-x nanoparticles for thermally labile tert-butylamine ligands. Analyses of the ligand exchange reaction by solution 1H NMR spectroscopy, FT-IR spectroscopy, and thermogravimetric analysis-mass spectrometry (TGA-MS) confirm the displacement of 60% of the native oleylamine ligands for the thermally labile tert-butylamine, which can be removed with a mild activation step at 250 °C. Catalytic site densities were determined by carbon monoxide (CO) chemisorption, demonstrating that the mild thermal treatment at 250 °C activates ca. 25% of the total binding sites, while the native oleylamine-terminated MoC1-x nanoparticles showed no available surface binding sites after this low-temperature treatment. The mild pretreatment at 250 °C also shows distinctly different initial activities and postinduction period selectivities in the CO2 hydrogenation reaction for the ligand exchanged MoC1-x nanoparticle catalysts and the as-prepared material.

Electrocatalytic CO2 Reduction over Cu3P Nanoparticles Generated via a Molecular Precursor Route.

The design of nanoparticles (NPs) with tailored morphologies and finely tuned electronic and physical properties has become a key strategy for controlling selectivity and improving conversion efficiency in a variety of important electrocatalytic transformations. Transition metal phosphide NPs, in particular, have emerged as a versatile class of catalytic materials due to their multifunctional active sites and composition- and phase-dependent properties. Access to targeted transition metal phosphide NPs with controlled features is necessary to tune the catalytic activity. To this end, we have established a solution-synthesis route utilizing a molecular precursor containing M-P bonds to generate solid metal phosphide NPs with controlled stoichiometry and morphology. We expand here the application of molecular precursors in metal phosphide NP synthesis to include the preparation of phase-pure Cu3P NPs from the thermal decomposition of [Cu(H)(PPh3)]6. The mechanism of [Cu(H)(PPh3)]6 decomposition and subsequent formation of Cu3P was investigated through modification of the reaction parameters. Identification and optimization of the critical reaction parameters (i.e., time, temperature, and oleylamine concentration) enabled the synthesis of phase-pure 9-11 nm Cu3P NPs. To probe the multifunctionality of this materials system, Cu3P NPs were investigated as an electrocatalyst for CO2 reduction. At low overpotential (-0.30 V versus RHE) in 0.1 M KHCO3 electrolyte, Cu3P-modified carbon paper electrodes produced formate (HCOO-) at a maximum Faradaic efficiency of 8%.

Femtosecond Measurements Of Size-Dependent Spin Crossover In Fe(II)(pyz)Pt(CN)4 Nanocrystals.

We report a femtosecond time-resolved spectroscopic study of size-dependent dynamics in nanocrystals (NCs) of Fe(pyz)Pt(CN)4. We observe that smaller NCs (123 or 78 nm cross section and <25 nm thickness) exhibit signatures of spin crossover (SCO) with time constants of ∼5-10 ps whereas larger NCs with 375 nm cross section and 43 nm thickness exhibit a weaker SCO signature accompanied by strong spectral shifting on a ∼20 ps time scale. For the small NCs, the fast dynamics appear to result from thermal promotion of residual low-spin states to high-spin states following nonradiative decay, and the size dependence is postulated to arise from differing high-spin vs low-spin fractions in domains residing in strained surface regions. The SCO is less efficient in larger NCs owing to their larger size and hence lower residual LS/HS fractions. Our results suggest that size-dependent dynamics can be controlled by tuning surface energy in NCs with dimensions below ∼25 nm for use in energy harvesting, spin switching, and other applications.

Platinum(IV)-kappa(3)-terpyridine complexes: synthesis with spectroscopic and structural characterization.

Herein we report the first structural characterization of a Pt(iv)-kappa(3)-terpyridine species, [Pt((t)Bu(3)tpy)Cl(3)][AuCl(2)], which can be prepared by oxidation with [AuCl(4)](-). The syntheses and characterization of [Pt((t)Bu(3)tpy)Cl(3)]Cl ((t)Bu(3)tpy is 4,4',4''-tri-tert-butyl-2,2':6',2''-terpyridine), as well as the platinum(ii) complexes [Pt((t)Bu(3)tpy)Cl]Cl and [Pt((t)Bu(3)tpy)Cl][AuCl(2)] are reported.