Novel Monosulfonated Azo Dyes: Design, Synthesis, and Application as Disperse Dyes on Polyester Fabrics.

This study synthesizes and characterizes a series of disperse dyes based on azo Schiff bases, compounds 8-10. Their structures were identified using various analytical techniques, such as FT-IR, 1H/13C NMR, and mass spectrometry. The study's primary objective was to investigate the behavior of disperse dyes 8-10 when used for dyeing polyester fabrics under different conditions, including variations in time, temperature, shade, and pH. The polyester fabric was chosen for this research due to its wide usage and popularity in the textile industry. By examining the effect of temperature and time on the dyeing process, it was observed that increasing the dyeing temperature from low to high (ranging from 90 to 120 °C) and extending the dyeing time from 10 to 30 min resulted in higher K/S values for the polyester samples dyed with disperse dyes. Additionally, dyes 9 and 10 exhibited the most excellent K/S values among the tested dyes. Furthermore, the study found that dye 8 showed the best dyeing performance as the pH of the dye bath increased to 6.

Phenol-Formaldehyde/Pyrazole Composite: Synthesis, Characterization, and Evaluation of its Chromate Removal Efficiency.

In this study, we report the successful synthesis of a phenol-formaldehyde-pyrazole (PF-PYZ) compound through the surface functionalization of phenol-formaldehyde (PF) with pyrazole (PYZ). The resulting mixture was subjected to comprehensive characterization using a range of analytical techniques, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The newly synthesized PF-PYZ material effectively removes Cr(VI) ions. Notably, a substantial elimination efficiency of 96% was achieved after just 60 min of contact time. The strategic incorporation of pyrazole (PYZ) as the principal functionalizing agent contributed to this exceptional performance. Notably, the functionalized PYZ sites were strategically positioned on the surface of PF, rendering them readily accessible to metal ions. Through rigorous testing, the optimal sorption capacity of PF-PYZ for Cr(VI) ions was quantified at 0.872 mmol Cr(VI)/g, highlighting the material's superior adsorption capabilities. The practical utility of PF-PYZ was further established through a reusability test, which demonstrated that the chromate capacity remained remarkably stable at 0.724 mequiv Cr(VI)/g over 20 consecutive cycles. This resilience underscores the robustness of the resin, indicating its potential for repeated regeneration and reuse without a significant capacity loss. Our work presents a novel approach to functionalizing phenol-formaldehyde with pyrazole, creating PF-PYZ, a highly efficient material for removing Cr(VI) ions. The compound's facile synthesis, exceptional removal performance, and excellent reusability collectively underscore its promising potential for various water treatments, especially oil field and environmental remediation applications.

Electrochemical Investigation of C-Steel Corrosion Inhibition, In Silico, and Sulfate-Reducing Bacteria Investigations Using Pyrazole Derivatives.

The inhibitory impact of the two synthesized pyrazole derivatives (3 and 4) toward metallic and microbial corrosion was investigated. Using open circuit potential, potentiodynamic polarization, and electrochemical impedance spectroscopy, it was possible to determine their ability to prevent the corrosion of C-steel in 1 M HCl, which was significantly enhanced with increasing concentration (ex. 93%). They act as mixed-type inhibitors, according to polarization curves. The compounds under investigation were adsorbed on a C-steel surface in 1 M HCl following the Langmuir isotherm model. The double-layer capacitance was decreased, and the charge transfer resistance (Rct) was raised due to the examined inhibitors' adsorption. Investigating changes in the surface morphology and confirming the corrosion inhibition mechanism are done using scanning electron microscopy. Density functional theory calculations and Monte Carlo simulations were also conducted to show the adsorption affinity of the understudied compounds over the steel substrate in neutral and protonated forms. Furthermore, the antimicrobial performance of the two synthesized pyrazoles against sulfate-reducing bacteria was evaluated, and the recorded inhibition efficiency was 100%. The current research shows important developments in producing highly effective anticorrosion and antimicrobial pyrazole derivatives.

Recent Progress in the Development of Organic Chemosensors for Formaldehyde Detection.

Formaldehyde has become a prominent topic of interest because of its simple molecular structure, release from various compounds in the near vicinity of humans, and associated hazards. Thus, several researchers designed sophisticated instrumentations for formaldehyde detection that exhibit real-time sensing properties and are cost-effective and portable with high detection limits. On these grounds, this review is centered on an analysis of optical chemosensors for formaldehyde that specifically fall under the broad spectrum of organic probes. In this case, this review discusses different organic functionalities, including amines, imines, aromatic pillar arenes, ß-ketoesters, and ß-diketones, taking part in various reaction mechanisms ranging from aza-Cope rearrangement and Schiff base and Hanztch reactions to aldimine condensation. In addition, this review distinguishes reaction mechanisms according to photophysical phenomena, that is, aggregation-induced emission, photoinduced electron transfer, and intramolecular charge transfer. Furthermore, it addresses the instrumentation involved in gas-based and liquid formaldehyde detection. Finally, it discusses the gaps in existing technologies followed by a succinct set of recommendations for future research.