BRCA1 safeguards genome integrity by activating chromosome asynapsis checkpoint to eliminate recombination-defective oocytes.

In the meiotic prophase, programmed DNA double-strand breaks are repaired by meiotic recombination. Recombination-defective meiocytes are eliminated to preserve genome integrity in gametes. BRCA1 is a critical protein in somatic homologous recombination, but studies have suggested that BRCA1 is dispensable for meiotic recombination. Here we show that BRCA1 is essential for meiotic recombination. Interestingly, BRCA1 also has a function in eliminating recombination-defective oocytes. Brca1 knockout (KO) rescues the survival of Dmc1 KO oocytes far more efficiently than removing CHK2, a vital component of the DNA damage checkpoint in oocytes. Mechanistically, BRCA1 activates chromosome asynapsis checkpoint by promoting ATR activity at unsynapsed chromosome axes in Dmc1 KO oocytes. Moreover, Brca1 KO also rescues the survival of asynaptic Spo11 KO oocytes. Collectively, our study not only unveils an unappreciated role of chromosome asynapsis in eliminating recombination-defective oocytes but also reveals the dual functions of BRCA1 in safeguarding oocyte genome integrity.

Biofabrication with microbial cellulose: from bioadaptive designs to living materials.

Nanocellulose is not only a renewable material but also brings functions that are opening new technological opportunities. Here we discuss a special subset of this material, in its fibrillated form, which is produced by aerobic microorganisms, namely, bacterial nanocellulose (BNC). BNC offers distinct advantages over plant-derived counterparts, including high purity and high degree of polymerization as well as crystallinity, strength, and water-holding capacity, among others. More remarkably, beyond classical fermentative protocols, it is possible to grow BNC on non-planar interfaces, opening new possibilities in the assembly of advanced bottom-up structures. In this review, we discuss the recent advances in the area of BNC-based biofabrication of three-dimensional (3D) designs by following solid- and soft-material templating. These methods are shown as suitable platforms to achieve bioadaptive constructs comprising highly interlocked biofilms that can be tailored with precise control over nanoscale morphological features. BNC-based biofabrication opens applications that are not possible by using traditional manufacturing routes, including direct ink writing of hydrogels. This review emphasizes the critical contributions of microbiology, colloid and surface science, as well as additive manufacturing in achieving bioadaptive designs from living matter. The future impact of BNC biofabrication is expected to take advantage of material and energy integration, residue utilization, circularity and social latitudes. Leveraging existing infrastructure, the scaleup of biofabrication routes will contribute to a new generation of advanced materials rooted in exciting synergies that combine biology, chemistry, engineering and material sciences.

Deciphering clonal dynamics and metastatic routines in a rare patient of synchronous triple-primary tumors and multiple metastases with MPTevol.

Multiple primary tumor (MPT) is a special and rare cancer type, defined as more than two primary tumors presenting at the diagnosis in a single patient. The molecular characteristics and tumorigenesis of MPT remain unclear due to insufficient approaches. Here, we present MPTevol, a practical computational framework for comprehensively exploring the MPT from multiregion sequencing (MRS) experiments. To verify the utility of MPTevol, we performed whole-exome MRS for 33 samples of a rare patient with triple-primary tumors and three metastatic sites and systematically investigated clonal dynamics and metastatic routines. MPTevol assists in comparing genomic profiles across samples, detecting clonal evolutionary history and metastatic routines and quantifying the metastatic history. All triple-primary tumors were independent origins and their genomic characteristics were consistent with corresponding sporadic tumors, strongly supporting their independent tumorigenesis. We further showed two independent early monoclonal seeding events for the metastases in the ovary and uterus. We revealed that two ovarian metastases were disseminated from the same subclone of the primary tumor through undergoing whole-genome doubling processes, suggesting metastases-to-metastases seeding occurred when tumors had similar microenvironments. Surprisingly, according to the metastasis timing model of MPTevol, we found that primary tumors of about 0.058-0.124 cm diameter have been disseminating to distant organs, which is much earlier than conventional clinical views. We developed MPT-specialized analysis framework MPTevol and demonstrated its utility in explicitly resolving clonal evolutionary history and metastatic seeding routines with a rare MPT case. MPTevol is implemented in R and is available at https://github.com/qingjian1991/MPTevol under the GPL v3 license.

Nanochitin: Chemistry, Structure, Assembly, and Applications.

Chitin, a fascinating biopolymer found in living organisms, fulfills current demands of availability, sustainability, biocompatibility, biodegradability, functionality, and renewability. A feature of chitin is its ability to structure into hierarchical assemblies, spanning the nano- and macroscales, imparting toughness and resistance (chemical, biological, among others) to multicomponent materials as well as adding adaptability, tunability, and versatility. Retaining the inherent structural characteristics of chitin and its colloidal features in dispersed media has been central to its use, considering it as a building block for the construction of emerging materials. Top-down chitin designs have been reported and differentiate from the traditional molecular-level, bottom-up synthesis and assembly for material development. Such topics are the focus of this Review, which also covers the origins and biological characteristics of chitin and their influence on the morphological and physical-chemical properties. We discuss recent achievements in the isolation, deconstruction, and fractionation of chitin nanostructures of varying axial aspects (nanofibrils and nanorods) along with methods for their modification and assembly into functional materials. We highlight the role of nanochitin in its native architecture and as a component of materials subjected to multiscale interactions, leading to highly dynamic and functional structures. We introduce the most recent advances in the applications of nanochitin-derived materials and industrialization efforts, following green manufacturing principles. Finally, we offer a critical perspective about the adoption of nanochitin in the context of advanced, sustainable materials.

Low-Toxicity Self-Photosensitized Biohybrid Systems for Enhanced Light-Driven H2 Production.

Nanoparticles (NPs) represent a potential optoelectronic source capable of significantly boosting hydrogen production; however, their inevitable cytotoxicity may lead to oxidative damage of bacterial cell membranes. In this study, we employed non-photosynthetic Escherichia coli K-12 as a model organism and utilized self-assembled cadmium sulfide (CdS) nanoparticles to construct a low-toxicity and hydrogen-production-enhancing self-photosensitive hybrid system. To mitigate the cytotoxicity of CdS NPs and synthesize biocompatible CdS NPs on the cell surface, we employed engineered E. coli (efeB/OE) for bioremediation, achieving this goal through the overexpression of the peroxidase enzyme (EfeB). A comparative analysis with E. coli-CdS revealed a significant downregulation of genes encoding oxidative stress proteins in efeB/OE-CdS post-irradiation. Atomic force microscopy (AFM) confirmed the stability of bacterial cell membranes. Due to the enhanced stability of the cell membrane, the hydrogen yield of the efeB/OE-CdS system increased by 1.3 times compared to the control, accompanied by a 49.1% reduction in malondialdehyde (MDA) content. This study proposes an effective strategy to alleviate the toxicity of mixed biological nanoparticle systems and efficiently harness optoelectronic electrons, thereby achieving higher hydrogen production in bioremediation.

Harnessing Nucleic Acids Nanotechnology for Bone/Cartilage Regeneration.

The effective regeneration of weight-bearing bone defects and critical-sized cartilage defects remains a significant clinical challenge. Traditional treatments such as autologous and allograft bone grafting have not been successful in achieving the desired outcomes, necessitating the need for innovative therapeutic approaches. Nucleic acids have attracted significant attention due to their ability to be designed to form discrete structures and programmed to perform specific functions at the nanoscale. The advantages of nucleic acid nanotechnology offer numerous opportunities for in-cell and in vivo applications, and hold great promise for advancing the field of biomaterials. In this review, the current abilities of nucleic acid nanotechnology to be applied in bone and cartilage regeneration are summarized and insights into the challenges and future directions for the development of this technology are provided.

Super-Macroporous Lightweight Materials Templated from Bicontinuous Intra-Phase Jammed Emulsion Gels Based on Nanochitin.

Non-equilibrium multiphase systems are formed by mixing two immiscible nanoparticle dispersions, leading to bicontinuous emulsions that template cryogels with interconnected, tortuous channels. Herein, a renewable, rod-like biocolloid (chitin nanocrystals, ChNC) is used to kinetically arrest bicontinuous morphologies. Specifically, it is found that ChNC stabilizes intra-phase jammed bicontinuous systems at an ultra-low particle concentration (as low as 0.6 wt.%), leading to tailorable morphologies. The synergistic effects of ChNC high aspect ratio, intrinsic stiffness, and interparticle interactions produce hydrogelation and, upon drying, lead to open channels bearing dual characteristic sizes, suitably integrated into robust bicontinuous ultra-lightweight solids. Overall, it demonstrates the successful formation of ChNC-jammed bicontinuous emulsions and a facile emulsion templating route to synthesize chitin cryogels that form unique super-macroporous networks.

Phenomenological Estimate of Isospin Breaking in Hadronic Vacuum Polarization.

Puzzles in the determination of the hadronic-vacuum-polarization contribution currently impede a conclusive interpretation of the precision measurement of the anomalous magnetic moment of the muon at the Fermilab experiment. One such puzzle concerns tensions between evaluations in lattice QCD and using e^{+}e^{-}→hadrons cross-section data. In lattice QCD, the dominant isospin-symmetric part and isospin-breaking (IB) corrections are calculated separately, with very different systematic effects. Identifying these two pieces in a data-driven approach provides an opportunity to compare them individually and trace back the source of the discrepancy. Here, we estimate the IB component of the lattice-QCD calculations from phenomenology, based on a comprehensive study of exclusive contributions that can be enhanced via infrared singularities, threshold effects, or hadronic resonances, including, for the first time, in the e^{+}e^{-}→3π channel. We observe sizable cancellations among different channels, with a sum that even suggests a slightly larger result for the QED correction than obtained in lattice QCD. We conclude that the tensions between lattice QCD and e^{+}e^{-} data therefore cannot be explained by the IB contributions in the lattice-QCD calculations.

Production of single cell oil by two novel nonconventional yeast strains of Curvibasidium sp. isolated from medicinal lichen.

Oleaginous yeasts utilize renewable resources to produce lipids, which benefits sustainable development, and it is of great interest to screen robust lipid producers. Curvibasidium sp. belongs to nonconventional yeast that are very limitedly studied. Here, two cold-adaptive strains of Curvibasidium sp., namely, Y230 and Y231, isolated from the medicinal lichen Usnea diffracta were investigated for their potential in lipid production. Genome mining of Curvibasidium sp. Y231 was performed, and the special features related to fatty acid biosynthesis were revealed. Glucose, xylose, and glycerol were tested as sole carbon sources for yeast cell growth and lipid production. The total lipid contents of Curvibasidium sp. Y230 and Y231 range from 38.43% to 54.62% of the cell dry cell weight at 20°C, and glucose is the optimal carbon source. These results indicate that the Curvibasidium sp. strains are promising for sustainable lipid production. Our study provides basis for exploration of lichen-derived strains for biotechnological applications, and also benefits utilization of other nonconventional yeasts for sustainable production based on genome-based studies.

Light-driven biodegradation of azo dyes by Shewanella decolorationis-CdS biohybrid in wastewater lacking electron donors.

The lack of electron donors prevents the effective degradation of azo dyes by bacteria, which severely limits the practical application of conventional biological treatment. Herein, we innovatively designed a bio-photoelectric reduction degradation system composed of CdS and Shewanella decolorationis, which could effectively degrade amaranth in anaerobic conditions driven by light when electron donors were unavailable. Compared with bare S. decolorationis and S. decolorationis (heat-killed)-CdS biohybrid, S. decolorationis-CdS biohybrid had 39.36-fold and 3.82-fold higher first-order kinetic constants, respectively. The morphology, particle size, elemental composition, crystalline type, photovoltaic properties, and band structure of the nanoparticles synthesized by S. decolorationis were carefully examined and analyzed. Light-driven biodegradation experiments showed that amaranth was degraded by the synergy of CdS and S. decolorationis. Reductive degradation of amaranth by electrons was demonstrated by electron and hole trapping. The effect of potential coexisting contaminants, which might serve as hole scavengers, on the degradation of amaranth was evaluated. Membrane protein inhibition experiments also suggested that NADH dehydrogenase, menaquinone, and cytochrome P450 played an important role in electron transfer between CdS and Shewanella decolorationis. The cyclic conversion of NAD+/NADH was probably the most critical rate-limiting step. Electrochemical measurements suggested that faster electron transfer might facilitate the degradation of amaranth. Our findings might contribute to the degradation of azo dyes in wastewater lacking electron donors and deepen our recognition of the microbe-material interface. KEY POINTS: • A BPRDS was constructed with Shewanella decolorationis and CdS. • Amaranth was effectively degraded by BPRDS in anaerobic conditions driven by light. • NDH, MQ, and CYP450 were involved in electron transfer.

Cell unit-inspired natural nano-based biomaterials as versatile building blocks for bone/cartilage regeneration.

The regeneration of weight-bearing bone defects and critical-sized cartilage defects remains a significant challenge. A wide range of nano-biomaterials are available for the treatment of bone/cartilage defects. However, their poor compatibility and biodegradability pose challenges to the practical applications of these nano-based biomaterials. Natural biomaterials inspired by the cell units (e.g., nucleic acids and proteins), have gained increasing attention in recent decades due to their versatile functionality, compatibility, biodegradability, and great potential for modification, combination, and hybridization. In the field of bone/cartilage regeneration, natural nano-based biomaterials have presented an unparalleled role in providing optimal cues and microenvironments for cell growth and differentiation. In this review, we systematically summarize the versatile building blocks inspired by the cell unit used as natural nano-based biomaterials in bone/cartilage regeneration, including nucleic acids, proteins, carbohydrates, lipids, and membranes. In addition, the opportunities and challenges of natural nano-based biomaterials for the future use of bone/cartilage regeneration are discussed.

Lead I R-wave indexes: A novel electrocardiographic criterion for distinguishing the origin of idiopathic premature ventricular contractions from the three subregions of the aortic sinus cusps.

PURPOSE: The current study was conducted to investigate the electrocardiographic (ECG) characteristics of idiopathic premature ventricular contractions (PVCs) originating from the aortic sinus cusp (ASC) and establish a novel ECG criterion to discriminate PVCs originating from the right coronary cusp (RCC), left coronary cusp (LCC), and the left and right coronary cusp junction (LRJ). METHODS: A retrospective analysis was performed on a total of 133 patients with idiopathic PVCs who underwent successful mapping and ablation. The sites of origin (SOO) were confirmed using fluoroscopy and a three-dimensional mapping system during radiofrequency catheter ablation (RFCA). Among the patients, 69 had PVCs originating from the LCC, 39 from the RCC, and 25 from the LRJ. Characteristics of surface 12­lead electrocardiograms (ECGs) recorded during PVCs were analyzed. Q-, R-, S, and R'-wave amplitudes were measured in lead I, and the lead I R-wave indexes (IRa, IRb, IRc, IRd, and IRe) were derived by employing multiplication, subtraction, sum, and division operations on these ECG measurements. Notably, IRb and IRe demonstrated usefulness as ECG indexes for discriminating PVCs originating from RCC, LCC, and LRJ in the ASC. RESULTS: The R- and S-wave amplitudes in lead I exhibited statistically significant differences among the three groups (P < 0.001 and P < 0.001, respectively). In discriminating PVCs originating from the RCC from the other two groups, IRb showed the largest area under the curve (AUC) of 0.813, as assessed by receiver operating characteristic (ROC) analysis, with a cutoff value of ≤0.5 indicating PVCs of RCC origin. The sensitivity and specificity were 80.3% and 78.7%, respectively. For discriminating PVCs arising from the LCC from those in the LRJ group, IRe exhibited the largest AUC of 0.801, with an optimal cutoff value of 0. An IRe value >0 indicated PVCs originating from the LRJ, while an IRe value ≤0 indicated PVCs originating from the LCC. The sensitivity and specificity of the IRe index were 84.0% and 70.7%, respectively. CONCLUSION: Lead I R-wave indexes provided simple and useful ECG criteria for discriminating PVCs originating from the LCC, RCC, and LRJ in the left ventricular outflow tract (LVOT).

Circulating Lipid- and Inflammation-Based Risk (CLIR) Score: A Promising New Model for Predicting Outcomes in Complete Colorectal Liver Metastases Resection.

BACKGROUND: Colorectal cancer liver metastasis (CRLM) is a determining factor affecting the survival of colorectal cancer (CRC) patients. This study aims at developing a novel prognostic stratification tool for CRLM resection. METHODS: In this retrospective study, 666 CRC patients who underwent complete CRLM resection from two Chinese medical institutions between 2001 and 2016 were classified into the training (341 patients) and validation (325 patients) cohorts. The primary endpoint was overall survival (OS). Associations between clinicopathological variables, circulating lipid and inflammation biomarkers, and OS were explored. The five most significant prognostic factors were incorporated into the Circulating Lipid- and Inflammation-based Risk (CLIR) score. The predictive ability of the CLIR score and Fong's Clinical Risk Score (CRS) was compared by time-dependent receiver operating characteristic (ROC) analysis. RESULTS: Five independent predictors associated with worse OS were identified in the training cohort: number of CRLMs >4, maximum diameter of CRLM >4.4 cm, primary lymph node-positive, serum lactate dehydrogenase (LDH) level >250.5 U/L, and serum low-density lipoprotein-cholesterol (LDL-C)/high-density lipoprotein-cholesterol (HDL-C) ratio >2.9. These predictors were included in the CLIR score and each factor was assigned one point. Median OS for the low (score 0-1)-, intermediate (score 2-3)-, and high (score 4-5)-risk groups was 134.0 months, 39.9 months, and 18.7 months in the pooled cohort. The CLIR score outperformed the Fong score with superior discriminatory capacities for OS and RFS, both in the training and validation cohorts. CONCLUSIONS: The CLIR score demonstrated a promising ability to predict the long-term survival of CRC patients after complete hepatic resection.

Improved Standard-Model Prediction for π

We present an improved standard-model (SM) prediction for the dilepton decay of the neutral pion. The loop amplitude is determined by the pion transition form factor for π^{0}→γ^{*}γ^{*}, for which we employ a dispersive representation that incorporates both spacelike and timelike data as well as short-distance constraints. The resulting SM branching fraction, Br[π^{0}→e^{+}e^{-}]=6.25(3)×10^{-8}, sharpens constraints on physics beyond the SM, including pseudoscalar and axial-vector mediators.

Connective tissue growth factor mediates bone morphogenetic protein 2-induced increase in hyaluronan production in luteinized human granulosa cells.

BACKGROUND: Hyaluronan is the main component of the cumulus-oocyte complex (COC) matrix, and it maintains the basic structure of the COC during ovulation. As a member of the transforming growth factor ß (TGF-ß) superfamily, bone morphogenetic protein 2 (BMP2) has been identified as a critical regulator of mammalian folliculogenesis and ovulation. However, whether BMP2 can regulate the production of hyaluronan in human granulosa cells has never been elucidated. METHODS: In the present study, we investigated the effect of BMP2 on the production of hyaluronan and the underlying molecular mechanism using both immortalized (SVOG) and primary human granulosa-lutein (hGL) cells. The expression of three hyaluronan synthases (including HAS1, HAS2 and HAS3) were examined following cell incubation with BMP2 at different concentrations. The concentrations of the hyaluronan cell culture medium were determined by enzyme-linked immunosorbent assay (ELISA). The TGF-ß type I receptor inhibitors (dorsomorphin and DMH-1) and small interfering RNAs targeting ALK2, ALK3, ALK6 and SMAD4 were used to investigate the involvement of TGF-ß type I receptor and SMAD-dependent pathway. RESULTS: Our results showed that BMP2 treatment significantly increased the production of hyaluronan by upregulating the expression of hyaluronan synthase 2 (HAS2). In addition, BMP2 upregulates the expression of connective tissue growth factor (CTGF), which subsequently mediates the BMP2-induced increases in HAS2 expression and hyaluronan production because overexpression of CTGF enhances, whereas knockdown of CTGF reverses, these effects. Notably, using kinase inhibitor- and siRNA-mediated knockdown approaches, we demonstrated that the inductive effect of BMP2 on the upregulation of CTGF is mediated by the ALK2/ALK3-mediated SMAD-dependent signaling pathway. CONCLUSIONS: Our findings provide new insight into the molecular mechanism by which BMP2 promotes the production of hyaluronan in human granulosa cells.

Nonlinear relationship with saturation effect observed between neutrophil to high-density lipoprotein cholesterol ratio and atherosclerosis in a health examination population: a cross-sectional study.

BACKGROUND: The relationships between inflammatory indexes and atherosclerosis as well as those between blood lipid indexes and atherosclerosis have been widely studied, but the relationship between the neutrophil to high-density lipoprotein cholesterol ratio (NHR) and atherosclerosis had not been investigated until the present study. METHODS: For this cross-sectional study, we continuously collected data from a health examination population in the Second Hospital of Hebei Medical University from January 2012 to December 2017 (N = 1978). The collected data included clinical data, hematological indexes, and brachial-ankle pulse wave velocity (Ba-PWV). Atherosclerosis was defined as Ba-PWV ≥ 1400 cm/s. The relationship between the NHR and atherosclerosis was explored via univariate regression analysis, multivariate regression analysis, smoothing function analysis, and analysis of a threshold saturation effect. RESULTS: Among 1978 participants, the mean age was 54 years, 1189 participants (60.11%) were male, and 1103 (55.76%) had a history of atherosclerosis. Univariate analysis showed a positive association between the NHR and atherosclerosis [odds ratio (OR) = 1.19, 95% confidence interval (CI): 1.11-1.27, P < 0.01], and this positive association remained significant on multivariate analyses with adjustments for confounding factors (OR = 1.14, 95% CI: 1.06-1.24, P < 0.01). Generalized additive model results revealed a non-linear relationship with a saturation effect between the NHR and atherosclerosis, with a threshold at 3.32. At values ≤ 3.32, the NHR was positively associated with atherosclerosis, but the association was not statistically significant for values > 3.32. CONCLUSION: A nonlinear relationship with a certain saturation effect was observed between the NHR and atherosclerosis in a health examination population.

The overestimated prevalence of hypertension in a population survey: a cross-sectional study from Hebei province, China.

OBJECTIVE: Currently, the prevalence of hypertension is mainly ascertained using a one-visit population survey, which may lead to overestimation. The purpose of this study was to assess the accuracy of hypertension prevalence determined by a one-visit population survey. METHODS: For this cross-sectional study, we continuously enrolled 1116 volunteers without a hypertension history in Hebei province from January 2018 to December 2019. The study population included 511 (45.80%) males and 605 (54.20%) females with a mean age of 48 years. The hypertension prevalence was assessed using two methods: one-visit screening and daytime ambulatory blood pressure (BP) monitoring. We directly compared the performances of daytime ambulatory BP monitoring and one-visit screening in the same group of subjects. In addition, we explored possible thresholds to improve the detection of hypertension. RESULTS: During the one-visit survey, the mean BP value was about 8 mmHg higher than that determined by daytime ambulatory BP monitoring. The prevalence of hypertension was 29.84% and 14.07% during the one-visit and daytime multiple visit surveys, respectively. The risk factors for overestimated hypertension were female sex, body mass index < 24.00 kg/m2, and diastolic BP of 100 mmHg. The positive predictive value of the one-visit population survey for diagnosing hypertension was 36.34%. Furthermore, receiver operating characteristic analysis showed that in males, the best diagnostic threshold for hypertension diagnosis was 148/96 mmHg. CONCLUSION: The hypertension prevalence was likely overestimated by 2-fold in the one-visit survey group compared to the daytime ambulatory BP monitoring group. Thus, the threshold for one-visit BP screening should be raised to 148/96 mmHg to improve the accuracy of hypertension diagnosis.

Photocatalytic performance of an α-Fe2O3 electrode and its effects on the growth and metabolism of Citrobacter freundii.

Electronic exchanges occur between semiconductor minerals and microorganisms. However, researchers have focused on the photocatalytic degradation of pollutants by semiconductor minerals, and there is a limited amount of studies on semiconductor photogenerated electrons that influence the growth and energetic mechanisms of bacteria. Bioelectrochemical systems (BES) are important new bioengineering technologies for investigating the mechanisms by which bacteria absorb electrons. In this work, we built a BES that used α-Fe2O3 nanorods as a photoanode and Citrobacter freundii as bio-cathode bacteria to explore the effect of photoelectrons on C. freundii growth and metabolism. The photoanode was prepared by a hydrothermal synthesis method. As confirmed by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), the photoanode was made of α-Fe2O3. Corresponding scanning electron microscope (SEM) images showed that α-Fe2O3 nanorod arrays formed with a diameter of 50 nm, and the band gap was 2.03 eV, as indicated by UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The C. freundii growth metabolism changed significantly because of photoelectrons; under light conditions, the growth rate of C. freundii significantly accelerated, and as inferred from the three-dimensional fluorescence spectrum, the protein, humic acid, and NADH concentrations were significantly higher at 72 h. According to the changes in the organic acid content, photoelectrons participated in the reductive tricarboxylic acid cycle (rTCA) to enhance growth and metabolism. The results of the study have broad implications for advancing fields that study the effects of semiconductor minerals on electroactive microorganisms and the semiconductor-photoelectronic transport mechanisms of electroautotrophic microorganisms. KEY POINTS: • For the first time, A BES was built that used α-Fe2O3 nanorods as a photoanode and C. freundii as a bio-cathode bacteria. • Photoelectrons produced by α-Fe2O3 photoelectrode promote the growth of C. freundii. • Effects of photoelectrons on C. freundii metabolism were conjectured by the changes of organic acids and NADH.

Spherical nucleic acids with tailored DNA conformation via bromide backfilling for the detection of kanamycin.

The improper conformation of oligonucleotides on gold nanoparticle surfaces is caused by unintended base adsorption, which hinders DNA hybridization and lowers colloidal stability. In this work, we treated spherical nucleic acids with Br- , which serves as an efficient backfilling agent, to adjust the DNA conformation by displacing bases from the gold surface. To investigate the effect of DNA conformation on interfacial recognition, a kanamycin fluorescent aptasensor was constructed with bromide backfilled-treated spherical nucleic acids. In the presence of kanamycin, the anchored aptamer binds with the target and the partially complementary reporter strand is dissociated from the surface of the gold nanoparticles, resulting in the fluorescence recovery of labelled fluorophore on the reporter strand. Under optimum conditions, the apparent binding affinity of the aptasensor with bromide backfilling was 2.2-fold that without backfilled one. The proposed aptasensor exhibited a good liner relationship between the concentration of kanamycin and fluorescence intensity change in the range 200 nM to 10 µM and the limit of detection was calculated to be 71.53 nM. Moreover, this aptasensor was also successfully applied in a spiked milk sample assay and the satisfactory recoveries were obtained in the range 96.94-101.57%, which demonstrated its potential in practical applications.

Nervous System-Driven Osseointegration.

Implants are essential therapeutic tools for treating bone fractures and joint replacements. Despite the in-depth study of osseointegration for more than fifty years, poor osseointegration caused by aseptic loosening remains one of the leading causes of late implant failures. Osseointegration is a highly sophisticated and spatiotemporal process in vivo involving the immune response, angiogenesis, and osteogenesis. It has been unraveled that the nervous system plays a pivotal role in skeletal health via manipulating neurotrophins, neuropeptides, and nerve cells. Herein, the research related to nervous system-driven osseointegration was systematically analyzed and reviewed, aiming to demonstrate the prominent role of neuromodulation in osseointegration. Additionally, it is indicated that the implant design considering the role of neuromodulation might be a promising way to prevent aseptic loosening.