Ultralong Bistable, Electrolytic MnO2-Based, Electrochromic Battery Enabled by Porous, Low-Barrier, Hydroxylated TiO2 Interface.

Electrochromic (EC) battery technology shows great potential in future "zero-energy building" by controlling outdoor solar transmission to tune heat gain as well as storing the consumed energy to reuse across other building systems. However, challenges still exist in exploring an electrochemical system to satisfy requirements on both ultra-long optical memory (also called bistability) without continuous power supply and high energy density. Herein, an EC battery is proposed to demonstrate ultra-long bistability (>760 h) based on the reversible deposition and dissolution of manganese oxide (MnO2) without the addition of any mediators. A porous low-barrier hydroxylated titanium dioxide (TiO2) interface is incorporated to synergistically enrich Mn2+-affinity active sites for deposition and effectively reduce the electron transport barrier of MnO2 for dissolution, thereby significantly improving the reversibility, high optical modulation (60.2% at 400 nm), and energy density (352 mAh m-2). The modification strategy is also verified on the cathode-less button cells with a much higher average coulombic efficiency (99.9%) compared to the batteries without the porous hydroxylated TiO2 interface (74.6%). These achievements lay a foundation for advancements in both electrochromism and Zn-Mn aqueous batteries.

Synergistic Interaction of Dual-Polymer Networks Containing Viologens-Anchored Poly(ionic liquid)s Enabling Long-Life and Large-Area Electrochromic Organogels.

Viologens-based electrochromic (EC) devices with multiple color changes, rapid response time, and simple all-in-one architecture have aroused much attention, yet suffer from poor redox stability caused by the irreversible aggregation of free radical viologens. Herein, the semi-interpenetrating dual-polymer network (DPN) organogels are introduced to improve the cycling stability of viologens-based EC devices. The primary cross-linked poly(ionic liquid)s (PILs) covalently anchored with viologens can suppress irreversible face-to-face contact between radical viologens. The secondary poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) chains with strong polar groups of -F can not only synergistically confine the viologens by the strong electrostatic effect, but also improve the mechanical performance of the organogels. Consequently, the DPN organogels show excellent cycling stability (87.5% retention after 10 000 cycles) and mechanical flexibility (strength of 3.67 MPa and elongation of 280%). Three types of alkenyl viologens are designed to obtain blue, green, and magenta colors, demonstrating the universality of the DPN strategy. Large-area EC devices (20 × 30 cm) and EC fibers based on organogels are assembled to demonstrate promising applications in green and energy-saving buildings and wearable electronics.

Bioinspired PLCL/Elastin Nanofibrous Vascular Tissue Engineering Scaffold Enhances Endothelial Cells and Inhibits Smooth Muscle Cells.

In vascular tissue engineering, a scaffold that can enhance the proliferation of endothelial cells (ECs) while inhibiting the synthetic differentiation of smooth muscle cells (SMCs) is crucial to prevent thrombus and restenosis after graft implantation. However, it is always challenging to incorporate both properties simultaneously in a vascular tissue engineering scaffold. In this study, a novel composite material was developed by combining a synthetic biopolymer of poly(l-lactide-co-caprolactone) (PLCL) and a natural biopolymer of elastin through electrospinning. Cross-linking of the PLCL/elastin composite fibers using EDC/NHS was performed to stabilize the elastin component. The incorporation of elastin into PLCL was found to enhance the hydrophilicity and biocompatibility of the resulting PLCL/elastin composite fibers, as well as the mechanical properties. Additionally, as a natural component of the extracellular matrix, elastin displayed antithrombotic properties reducing platelet adhesion and improving blood compatibility. Results of cell culture experiments with human umbilical vein ECs (HUVECs) and human umbilical artery SMCs (HUASMCs) showed that the composite fiber membrane had high cell viability, promoting the proliferation and adhesion of HUVECs and inducing a contractile phenotype in HUASMCs. These results indicate that the PLCL/elastin composite material has great potential for use in vascular graft applications due to its favorable properties and rapid endothelialization and contractile phenotypes of cells.

Hierarchical Shish-Kebab Structures Functionalizing Nanofibers for Controlled Drug Release and Improved Antithrombogenicity.

The functionalization of the fibrous scaffolds including drug loading and release is of significance in tissue engineering and regenerative medicine. Our previous results have shown that the shish-kebab structure-modified fibrous scaffold shows a completely different microenvironment that mimics the topography of the collagen fibers, which interestingly facilitates the cell adhesion and migration. However, the functionalization of the unique structure needs to be further investigated. In this study, we modified the heparin-loaded fiber with a shish-kebab structure and tuned the kebab structure as the barrier for the sustained release of heparin. The introduction of the kebab structure increases the diffusion energy barrier by extending the diffusion distance. Moreover, the discontinued surface topography of the shish-kebab structure altered the surface chemistry from hydrophobic for the original poly(ε-caprolactone) (PCL) nanofibers to hydrophilic for the PCL nanofibers with the shish-kebab structure, which might have inhibited the activation of fibrinogen and thus improved the anticoagulant ability. This synergistic effect of heparin and the kebab structure significantly promotes the endothelial cell affinity and antithrombogenicity. This method might be a viable and versatile drug delivery strategy in vascular tissue engineering.

Transcriptome Analysis Reveals the Genes Related to Pollen Abortion in a Cytoplasmic Male-Sterile Soybean (Glycine max (L.) Merr.).

Cytoplasmic male sterility (CMS) lays a foundation for the utilization of heterosis in soybean. The soybean CMS line SXCMS5A is an excellent CMS line exhibiting 100% male sterility. Cytological analysis revealed that in SXCMS5A compared to its maintainer SXCMS5B, its tapetum was vacuolated and abnormally developed. To identify the genes and metabolic pathways involving in pollen abortion of SXCMS5A, a comparative transcriptome analysis was conducted between SXCMS5A and SXCMS5B using flower buds. A total of 372,973,796 high quality clean reads were obtained from 6 samples (3 replicates for each material), and 840 differentially expressed genes (DEGs) were identified, including 658 downregulated and 182 upregulated ones in SXCMS5A compared to SXCMS5B. Among them, 13 DEGs, i.e., 12 open reading frames (ORFs) and 1 COX2, were mitochondrial genome genes in which ORF178 and ORF103c were upregulated in CMS lines and had transmembrane domain(s), therefore, identified as CMS candidate mitochondrial genes of SXCMS5A. Furthermore, numerous DEGs were associated with pollen wall development, carbohydrate metabolism, sugar transport, reactive oxygen species (ROS) metabolism and transcription factor. Some of them were further confirmed by quantitative real time PCR analysis between CMS lines with the same cytoplasmic source as SXCMS5A and their respective maintainer lines. The amount of soluble sugar and adenosine triphosphate and the activity of catalase and ascorbic acid oxidase showed that energy supply and ROS scavenging decreased in SXCMS5A compared to SXCMS5B. These findings provide valuable information for further understanding the molecular mechanism regulating the pollen abortion of soybean CMS.

SNP identification and allelic-specific PCR markers development for TaGW2, a gene linked to wheat kernel weight.

TaGW2, an orthologous gene of rice OsGW2, has been associated with kernel width and weight of bread wheat (Triticum aestivum). Difference in TaGW2 coding sequence was not found among different wheat varieties in previous researches. In this study, we found eight exons and seven introns in TaGW2 with a full-length cDNA sequence of 1,275 bp, which contains a conserved function domain and seven splice sites that shared homology with rice OsGW2. A single T-base insertion in the eighth exon of TaGW2 on chromosome 6A was detected in a large-kernel wheat variety, Lankaodali. This insertion mutation reduces the coding protein sequence from normal 424 amino acids (~47.2 kDa) to 328 amino acids (~37.1 kDa) by truncating 96 amino acids. The result was validated by identifying histidine-tagged TaGW2 proteins encoded by both alleles of the mutant and the wild types in SDS-PAGE. Allele-specific PCR markers were developed based on the single nucleotide polymorphism (SNP) site. The SNP markers were genotyped for an F(2) segregation population from the cross of Lankaodali × Chinese Spring. Seed traits of F(2:3) families were evaluated in three different environments. The association analysis indicated that F(2:3) families with the mutated TaGW2 allele significantly increased kernel width (KW) and thousand-kernel weight (TKW), and slightly improved kernel length (KL). Using the SNP markers, another two varieties harbored the mutated TaGW2 allele were successfully identified from 22 additional wheat varieties, and they both have large KW and TKW. Cloning and sequencing of the gene further confirmed the functions of the mutated allele of TaGW2 in the two large kernel varieties. The results suggested that TaGW2 may negatively regulate kernel size variation, which shares the same function as OsGW2 in rice. The successful development of SNP markers provides a useful tool for improving kernel yield in wheat.

Nanofibrous polytetrafluoroethylene/poly(ε-caprolactone) membrane with hierarchical structures for vascular patch.

With the prevalence of cardiovascular diseases, developing cardiovascular supplements is becoming increasingly urgent. The ability of cells to rapidly adhere and proliferate to achieve endothelialization is extremely important for vascular grafts. In this work, we electrospun polytetrafluoroethylene (PTFE) nanofibrous membranes and used induced crystallization to manufacture poly(ε-caprolactone) (PCL) shish-kebab microstructures on PTFE nanofibers to overcome the inertness of PTFE, and promote cell adhesion and proliferation. PCL lamella periodically grew on the surface of PTFE nanofibers yielding a hierarchical structure, which improved the biocompatibility and mechanical properties of the PTFE nanofibrous membrane. The deposition of PCL lamella improved the hydrophilicity of electrospun PTFE nanofibers membrane, leading to good cell proliferation and adhesion. Also, due to the surface inertness of the substrate material PTFE, this PTFE/PCL composite film has good anti-platelet adhesion properties. Furthermore, cell proliferation could be regulated by controlling the integrity of the PCL crystal network. The vascular patch showed similar mechanical properties to natural blood vessels, providing a new strategy for vascular tissue engineering.

Improvement of XYL10C_∆N catalytic performance through loop engineering for lignocellulosic biomass utilization in feed and fuel industries.

BACKGROUND: Xylanase, an important accessory enzyme that acts in synergy with cellulase, is widely used to degrade lignocellulosic biomass. Thermostable enzymes with good catalytic activity at lower temperatures have great potential for future applications in the feed and fuel industries, which have distinct demands; however, the potential of the enzymes is yet to be researched. RESULTS: In this study, a structure-based semi-rational design strategy was applied to enhance the low-temperature catalytic performance of Bispora sp. MEY-1 XYL10C_∆N wild-type (WT). Screening and comparisons were performed for the WT and mutant strains. Compared to the WT, the mutant M53S/F54L/N207G exhibited higher specific activity (2.9-fold; 2090 vs. 710 U/mg) and catalytic efficiency (2.8-fold; 1530 vs. 550 mL/s mg) at 40 °C, and also showed higher thermostability (the melting temperature and temperature of 50% activity loss after 30 min treatment increased by 7.7 °C and 3.5 °C, respectively). Compared with the cellulase-only treatment, combined treatment with M53S/F54L/N207G and cellulase increased the reducing sugar contents from corn stalk, wheat bran, and corn cob by 1.6-, 1.2-, and 1.4-folds, with 1.9, 1.2, and 1.6 as the highest degrees of synergy, respectively. CONCLUSIONS: This study provides useful insights into the underlying mechanism and methods of xylanase modification for industrial utilization. We identified loop2 as a key functional area affecting the low-temperature catalytic efficiency of GH10 xylanase. The thermostable mutant M53S/F54L/N207G was selected for the highest low-temperature catalytic efficiency and reducing sugar yield in synergy with cellulase in the degradation of different types of lignocellulosic biomass.

Loop engineering of a thermostable GH10 xylanase to improve low-temperature catalytic performance for better synergistic biomass-degrading abilities.

Lignocellulosic biorefining for producing biofuels poses technical challenges. It is usually conducted over a long time using heat, making it energy intensive. In this study, we lowered the energy consumption of this process through an optimized enzyme and pretreatment strategy. First, the dominant mutant M137E/N269G of Bispora sp. MEY-1XYL10C_ΔN was obtained by directed evolution with highcatalytic efficiency (970 mL/s∙mg)and specific activity (2090 U/mg)at 37 °C, and thermostability was improved (T50 increased by5 °C). After pretreatment with seawater immersionfollowing steam explosion,bagasse was co-treated with cellulase and M137E/N269G under mild conditions (37 °C), the resulting highest yield of fermentable sugars reached 219 µmol/g of bagasse,46% higher than that of the non-seawater treatment group, with the highest degree of synergy of 2.0. Pretreatment with seawater following steam explosion and synergistic hydrolysis through high activity xylanase and cellulase helped to achieve low energy degradation of lignocellulosic biomass.

Endothelial Cell Migration Regulated by Surface Topography of Poly(ε-caprolactone) Nanofibers.

The study of cell migration on biomaterials is of great significance in tissue engineering and regenerative medicine. In recent years, there has been increasing evidence that the physical properties of the extracellular matrix (ECM), such as surface topography, affect various cellular behaviors such as proliferation, adhesion, and migration. However, the biological mechanism of surface topography influencing cellular behavior is still unclear. In this study, we prepared polycaprolactone (PCL) fibrous materials with different surface microstructures by solvent casting, electrospinning, and self-induced crystallization. The corresponding topographical structure obtained is a two-dimensional (2D) flat surface, 2.5-dimensional (2.5D) fibers, and three-dimensional (3D) fibers with a multilevel microstructure. We then investigated the effects of the complex topographical structure on endothelial cell migration. Our study demonstrates that cells can sense the changes of micro- and nanomorphology on the surface of materials, adapt to the physical environment through biochemical reactions, and regulate actin polymerization and directional migration through Rac1 and Cdc42. The cells on the nanofibers are elongated spindles, and the positive feedback of cell adhesion and actin polymerization along the fiber direction makes the plasma membrane continue to protrude, promoting cell polarization and directional migration. This study might provide new insights into the biomaterial design, especially those used for artificial vascular grafts.

Transparent Metal-Organic Framework-Based Gel Electrolytes for Generalized Assembly of Quasi-Solid-State Electrochromic Devices.

Metal-organic framework (MOF)-based electrolytes under gel/solid states have been widely used for electrochemical devices recently due to their designable metal centers/ligands and diffusion channels in the porous structures. Therefore, it is always desired to apply the MOF-based electrolytes in electrochromic (EC) fields. Yet, challenges exist in realizing their high optical transparency to satisfy the unique optical requirements of EC devices. Herein, a transparent MOF-based gel electrolyte (MGE) is demonstrated through the incorporation of 2-methylimidazole among MOF nanocrystals to prevent the strong light scattering of MOF nanocrystals. As a result, the gel electrolyte showed an improved average transmittance of ca. 82.2% compared with the MOF electrolytes without 2-methylimidazole (ca. 59.2%). In addition, because of the designed large channels in the porous MOF structure, the gel electrolyte exhibited a high ionic conductivity of 2.66 × 10-3 S cm-1. At last, we used the transparent MGEs to assemble two types (rigid and flexible) of quasi-solid-state EC devices based on inorganic WO3 and organic poly(3,4-ethylenedioxythiophene) (PEDOT), respectively. Both devices showed great EC performances, and the flexible devices exhibited high mechanical stability under the bending state or even after being cut and punched, advancing the general applications of our transparent MGEs in EC fields.

Ventilator for the management of patients with severe pneumonia: A protocol of systematic review.

BACKGROUND: This study will assess the efficacy and safety of ventilator for the management of severe pneumonia (SP). METHODS: This study will search the following electronic databases in MEDLINE, EMBASE, Web of Science, PsycINFO, Cochrane Library, CNKI, and Scopus from the beginning to present without language restrictions. Two authors will screen all records according to the eligibility criteria; assess study quality; and extract all essential data from eligible studies. If sufficient studies are included, we will pool the extracted data and carry out meta-analysis. RESULTS: This study will summarize published studies to assess the efficacy and safety of ventilator for patients with SP. CONCLUSION: The results of this study may supply a genuine understanding of perspective from a scientific basis on ventilator for the management of patients with SP.