Stabilization of a Photoradiated Naphthalene Diimide-Based Organic Radical Anion Inside a Peptide-Based Gel Matrix with an Improvement of Optoelectronic Properties.

An amino acid-conjugated naphthalene diimide (NDI)-based highly red fluorescent radical anion has been found in a water medium under the photoradiated condition. This molecule has failed to form the radical anion in the monomeric state; however, the J aggregation in the aqueous medium has ensured the formation of radical anion in the ambient condition after the irradiation of both sunlight and UV light exposure. Electron paramagnetic resonance (EPR) studies clearly suggest the formation of radical anions. Herein, the stability of the radical anion in the aqueous medium is only a few minutes as a small amount of shaking is enough to quench the radical anion in the solution state. Furthermore, the incorporation of this molecule into a peptide-based hydrogel matrix and the consequent photoirradiation have not only helped to develop radical anion in the gel matrix but also increased the enormous stability of the radical anion inside the hydrogel matrix even for 30 days. It is envisaged that the formation of the radical anion within the gel matrix prevents the free movement of the NDI molecules and restricts the diffusion of molecular oxygen in the system, which leads to the stability of the radical anions in the gel. Moreover, the stability of the radical anion within the gel has helped to enhance the conductivity of the hybrid gel to a great extent. Interestingly, the radical anion-containing hybrid hydrogel has shown a potential photoswitching property.

Cationic and amphiphilic peptide-based hydrogels with dual activities as anticancer and antibacterial agents.

The emergence of peptide-based functional biomaterials is on the rise. To fulfil this purpose, a series of amphiphilic peptides, such as H2N-X-Met-Phe-C12H25, where X = L-lysine (CP1), X = L-histidine (CP2), and X = L-leucine (CP3), have been designed, synthesised, purified and fully characterised. Herein, we reported peptide-based supramolecular hydrogels with antibacterial and anticancer activities. An attempt has been made to investigate the antibacterial properties of these peptide-based hydrogels against Gram-positive (S. aureus and B. subtilis) and Gram-negative (E. coli and P. aeruginosa) bacteria. Investigations show that the L-lysine containing gelator, CP1, is active against both Gram-positive and Gram-negative bacteria and the L-histidine containing gelator, CP2, selectively inhibits the growth of Gram-negative bacteria. Interestingly, the L-leucine containing gelator, CP3, does not show any antibacterial properties. Moreover, the L-lysine containing gelator exhibits the best potency. Generation of reactive oxygen species (ROS) is a probable way to damage the bacterial membrane. To explore the cytotoxic properties and to determine the efficacy of the synthesized compounds in inhibiting cell viability, a comprehensive investigation was performed using three distinct cell lines: MDA-MB-231 (human triple-negative breast cancer), MDA-MB-468 (human triple-negative breast cancer) and HEK 293 (human embryonic kidney). Remarkably, the results of our study revealed a substantial cytotoxic impact of these peptide gelators on the MDA-MB-231 and MDA-MB-468 cell lines in comparison to the HEK 293 cells. Caspase 3/7 activity is the possible mechanistic path to determine the apoptotic rates of the cell lines. This finding emphasizes the promising potential of these peptide-based gelators in targeting and suppressing the growth of human triple negative breast cancer cells, while showing non-cytotoxicity towards non-cancerous HEK 293 cells. In a nutshell, these peptide-based materials are coming to light as next generation biomaterials.

Carbon Dot as Visible-Light Photoredox Catalysts for a Myriad of Organic Transformations.

Metal-free catalysts for various organic transformations are of high demand now. In this study, we present a new carbon dot as an efficient metal-free nanophotocatalyst for carrying out a series of organic bond formation reactions. Using a single photocatalyst carbon dot, Csp2-Csp2, Csp2-B, Csp2-S, Csp2-Se, and C-P bond formation reactions were performed with a high yield of the corresponding products. Moreover, Csp2-H activation of the aromatic ring was achieved by merging the carbon dot photocatalyst with a transition metal. Interestingly, these carbon nanodot-based catalysts show good recyclability a few times without any significant loss of catalytic activity. The development of catalytic systems based on carbon dots has its merits vested in the advantageous properties of this nanomaterial, such as a robust chemical nature and cheap cost of preparation. This report demonstrates that a carbon dot indeed holds the potential to replace expensive metal-based catalysts as well as organic dyes in five different photoredox reactions.

Transition to plastic regime for Rayleigh-Taylor instability in soft solids.

Rayleigh-Taylor instability (RTI) is observed in soft materials that have significant resistance to yield. Estimating the instability threshold is critical to several engineering applications and has been the topic of several studies in past decades. However, limited attention has been given to the elastic-to-plastic (EP) transition threshold, where material properties vary significantly. This study explores the phase transition between the pure elastic and stable plastic regimes in RTI in a soft solid (mayonnaise) using a rotating wheel experimental setup with a time-varying acceleration profile. The material properties of the soft solid are characterized using rheological techniques. Different initial perturbation wavelength and amplitude combinations are used to analyze their role in the EP transition threshold and the subsequent maximum fully recoverable elastic strain. The effects of the initial perturbation dimensions, the steepness of the perturbation, and the mass of the perturbation on the stability of the samples, the EP transition thresholds, and the maximum fully recoverable elastic strains are analyzed. The samples with the largest full elastic recovery potentials and the parameters governing this phenomenon are identified, and the physics behind it is discussed. It is observed that increasing the initial perturbation wavelength decreases the required phase transition acceleration while increasing the maximum fully recoverable elastic strain. Finally, nondimensional parameters that involve the perturbation dimensions, as well as the mechanical properties of the material, are introduced to provide a generalized approach to the problem.

Rapid targeting and imaging of mitochondria via carbon dots using an amino acid-based amphiphile as a carrier.

Green-fluorescent biocompatible carbon dots with a quantum yield of 40% were successfully synthesized through a solvothermal process and then they are comprehensively characterized. The carbon dots showed a negatively charged surface owing to the presence of carboxylic groups. This negative surface charge hinders the effective targeting and imaging of mitochondria. To address this limitation, a new approach is developed in this study. An amphiphile containing phenylalanine, with a positively charged polar head consisting of triphenylphosphine and a hydrophobic aliphatic tail, was designed, synthesized, purified, and characterized. This amphiphile formed spherical micelle-type nanostructures in an aqueous medium in the aggregated state. Although these nanoprobes lack inherent fluorescence, they exhibited the capability to image mitochondria when their spherical micelle-type nanostructures were decorated with negatively charged fluorescent nanocarbon dots in both cancerous (KB cells) and non-cancerous (CHO cells) cell lines. Notably, carbon dots without the amphiphile failed to penetrate the cell membrane as they exhibited significantly low emission inside the cell. This study extensively explored the cell entry mechanism of the hybrid nanoprobes. The photophysical changes and the interaction between the negatively charged carbon dots and the positively charged nanospheres of the amphiphile were also analyzed in this study.

A chemically engineered water-soluble block copolymer for redox responsive SO2 release in antibacterial therapy.

Sulfur dioxide (SO2) has emerged as a promising gasotransmitter for various therapeutic applications, including antibacterial activities. However, the potential of polymeric SO2 donors for antimicrobial activities remains largely unexplored. Herein, we report a water-soluble, redox-responsive, SO2-releasing amphiphilic block copolymer poly(polyethylene glycol methyl ether methacrylate) (PPEGMA)-b-poly(2-((2,4-dinitrophenyl)sulfonamido)ethyl methacrylate (PM)) (BCPx) to investigate their antibacterial properties. BCPx contains hydrophilic polyethylene glycol (PEG) pendants and a hydrophobic SO2-releasing PM block, facilitating the formation of self-assembled nanoparticles (BCPxNp) in an aqueous medium, studied by critical aggregation concentration (CAC) measurements, dynamic light scattering (DLS), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). BCPxNp exhibits sustained SO2 release up to 12 h in the presence of glutathione (GSH), with a yield of 30-80% of theoretical SO2 release. In vitro antibacterial studies unveil the outstanding antibacterial activity of BCP3Np against Gram-positive bacteria Bacillus subtilis, as evidenced by FESEM and live/dead cell fluorescence assay. We further elucidate the antibacterial mechanism through reactive oxygen species (ROS) generation studies. Overall, the polymer exhibits excellent biocompatibility at effective antimicrobial concentrations and provides insights into the design of a new class of SO2-releasing polymeric antibacterial agents.