RESUMEN
We assessed environmental contamination of inpatient rooms housing coronavirus disease 2019 (COVID-19) patients in a dedicated COVID-19 unit. Contamination with severe acute respiratory syndrome coronavirus 2 was found on 5.5% (19/347) of surfaces via reverse transcriptase polymerase chain reaction and 0.3% (1/347) of surfaces via cell culture. Environmental contamination is uncommon in hospitals rooms; RNA presence is not a specific indicator of infectious virus.
Asunto(s)
COVID-19 , SARS-CoV-2 , Técnicas de Cultivo , Contaminación Ambiental/análisis , Hospitales , Humanos , ARN ViralRESUMEN
We present and analyze a series of benchmark tests regarding the application of the immersed boundary (IB) method to viscoelastic flows through and around non-trivial, stationary geometries. The IB method is widely used to simulate biological fluid dynamics and other modeling scenarios in which a structure is immersed in a fluid. Although the IB method has been most commonly used to model systems involving viscous incompressible fluids, it also can be applied to visoelastic fluids, and has enabled the study of a wide variety of dynamical problems including the settling of vesicles and the swimming of elastic filaments in fluids modeled by the Oldroyd-B constitutive equation. In the viscoelastic context, however, relatively little work has explored the accuracy or convergence properties of this numerical scheme. Herein, we present benchmarking results for an IB solver applied to viscoelastic flows in and around non-trivial geometries using either the idealized Oldroyd-B constitutive model or the more physcially realistic, polymer-entanglementbased Rolie-Poly constitutive equations. We use two-dimensional numerical test cases along with results from rheology experiments to benchmark the IB method and compare it to more complex finite element and finite volume viscoelastic flow solvers. Additionally, we analyze different choices of regularized delta function and relative Lagrangian grid spacings which allow us to identify and recommend the key choices of these numerical parameters depending on the present flow regime.
RESUMEN
OBJECTIVE: To analyze Clostridioides difficile testing in 3 hospitals in central North Carolina to validate previous racial health-disparity findings. METHODS: We completed a retrospective analysis of inpatient C. difficile tests from 2015 to 2021 at 3 university-affiliated hospitals in North Carolina. We calculated the number of C. difficile tests per 1,000 patient days stratified by race: White, Black, and non-White, non-Black (NWNB). We defined a unique C. difficile test as one that occurred in an inpatient unit with a matching laboratory accession ID and on differing calendar days. Tests were evaluated overall, by hospital, by year, and by positivity rate. RESULTS: In total, 35,160 C. difficile tests and 2,571,850 patient days across all 3 hospitals from 2015 to 2021 were analyzed. The median number of C. difficile tests per 1,000 patient days was 13.85 (interquartile range [IQR], 9.88-16.07). Among all C. difficile tests, 5,225 (15%) were positive. White patients were administered more C. difficile tests (14.46 per 1,000 patient days) than Black patients (12.96; P < .0001) or NWNB race patients (10.27; P < .0001). Black patients were administered more tests than NWNB patients (P < .0001). White patients tested positive at a similar rate to Black patients (15% vs 15%; P = .3655) and higher than NWNB individuals (12%; P = .0061), and Black patients tested positive at a higher rate than NWNB patients (P = .0024). CONCLUSION: White patients received more C. difficile tests than Black and NWNB patient groups when controlling for race patient days. Future studies should control for comorbidities and investigate community onset of C. difficile by race and ethnicity.
Asunto(s)
Clostridioides difficile , Humanos , Estudios Retrospectivos , Hospitales , Comorbilidad , BlancoRESUMEN
BACKGROUND: Frequently used physical therapy (PT) equipment is difficult to disinfect due to equipment material and shape. The efficacy of standard disinfection of PT equipment is poorly understood. METHODS: We completed a 2-phase prospective microbiological analysis of fomites used in PT at our hospital from September 2022 to October 2023. For both phases, study fomites were obtained after usage and split into symmetrical halves for sampling. In phase 1, sides were sampled following standard disinfection. In phase 2, sides were randomized 1:1 to intervention or control. Samples were obtained before and after the intervention, a disinfection cabinet using Ultraviolet C (UV-C) and 6% nebulized hydrogen peroxide. We defined antimicrobial-resistant clinically important pathogens (AMR CIP) as methicillin-resistant staphylococcus aureus (MRSA), Vancomycin Resistant Enterococcus (VRE), and Multidrug resistant (MDR)-Gram-negatives and non-AMR CIP as methicillin-sensitive staphylococcus aureus (MSSA), Vancomycin sensitive Enterococcus (VSE), and Gram-negatives. Three assessments were made: 1) contamination following standard disinfection (phase 1), 2) contamination postintervention compared to no disinfection (phase 2) and, 3) contamination following standard disinfection compared to postintervention (phase 1 vs phase 2 intervention). RESULTS: The median total colony-forming units (CFU) from 122 study fomite samples was 1,348 (IQR 398-2,365). At the sample level, 52(43%) and 15(12%) of samples harbored any clinically important pathogens (CIPs) or AMR CIPs, respectively. The median CFU was 0 (IQR 0-55) in the intervention group and 977 (409-2,547) in the control group (P < .00001). CONCLUSION: Following standard disinfection, PT equipment remained heavily contaminated including AMR and non-AMR CIPs. Following the intervention, PT equipment was less contaminated and harbored no AMR CIPs compared to control sides supporting the efficacy of the intervention on difficult-to-disinfect PT fomites.
RESUMEN
We evaluated sampling and detection methods for fungal contamination on healthcare surface materials, comparing the efficacy of foam sponges, flocked swabs, and Replicate Organism Detection And Counting (RODAC) plates alongside culture-based quantification and quantitative polymerase chain reaction (qPCR). Findings indicate that sponge sampling and qPCR detection performed best, suggesting a foundation for future studies aiming to surveillance practices for fungi.
RESUMEN
BACKGROUND: The origins and timing of inpatient room sink contamination with carbapenem-resistant organisms (CROs) are poorly understood. METHODS: We performed a prospective observational study to describe the timing, rate, and frequency of CRO contamination of in-room handwashing sinks in 2 intensive care units (ICU) in a newly constructed hospital bed tower. Study units, A and B, were opened to patient care in succession. The patients in unit A were moved to a new unit in the same bed tower, unit B. Each unit was similarly designed with 26 rooms and in-room sinks. Microbiological samples were taken every 4 weeks from 3 locations from each study sink: the top of the bowl, the drain cover, and the p-trap. The primary outcome was sink conversion events (SCEs), defined as CRO contamination of a sink in which CRO had not previously been detected. RESULTS: Sink samples were obtained 22 times from September 2020 to June 2022, giving 1,638 total environmental cultures. In total, 2,814 patients were admitted to study units while sink sampling occurred. We observed 35 SCEs (73%) overall; 9 sinks (41%) in unit A became contaminated with CRO by month 10, and all 26 sinks became contaminated in unit B by month 7. Overall, 299 CRO isolates were recovered; the most common species were Enterobacter cloacae and Pseudomonas aeruginosa. CONCLUSION: CRO contamination of sinks in 2 newly constructed ICUs was rapid and cumulative. Our findings support in-room sinks as reservoirs of CRO and emphasize the need for prevention strategies to mitigate contamination of hands and surfaces from CRO-colonized sinks.
Asunto(s)
Carbapenémicos , Infección Hospitalaria , Humanos , Carbapenémicos/farmacología , Infección Hospitalaria/prevención & control , Infección Hospitalaria/microbiología , Control de Infecciones , Unidades de Cuidados Intensivos , HospitalesRESUMEN
N95 respirator contamination with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) during clinical care of patients with coronavirus disease 2019 is poorly understood. We performed a prospective observational study on healthcare provider's (HCP's) N95 respirators' and face shields' SARS-CoV-2 contamination during aerosol-generating procedures on SARS-CoV-2-positive patients housed in a COVID-19-specific unit. Medical masks worn on top of HCP's N95 respirators, and under face shields, during study aerosol-generating procedures were used as surrogates to detect contamination to avoid waste. Thirty-three HCPs were studied, and a total of 33 mask and 27 face shields were sampled. Masks were cut into 9 pieces and face shields were sampled twice, front and back, to determine locality of contamination; however, no positive samples were identified using standard polymerase chain reaction techniques with a CT value up to 40. All 9 mask piece samples were then pooled, as were face shield samples, using centrifugal concentration with polyethersulfone membranes. Once pooled and concentrated, overall, 9 (15%) samples were positive via real-time polymerase chain reaction: 5 from masks (15.2%) and 4 from face shields (14.8%).
RESUMEN
BACKGROUND: Various water-based heater-cooler devices (HCDs) have been implicated in nontuberculous mycobacteria outbreaks. Ongoing rigorous surveillance for healthcare-associated M. abscessus (HA-Mab) put in place following a prior institutional outbreak of M. abscessus alerted investigators to a cluster of 3 extrapulmonary M. abscessus infections among patients who had undergone cardiothoracic surgery. METHODS: Investigators convened a multidisciplinary team and launched a comprehensive investigation to identify potential sources of M. abscessus in the healthcare setting. Adherence to tap water avoidance protocols during patient care and HCD cleaning, disinfection, and maintenance practices were reviewed. Relevant environmental samples were obtained. Patient and environmental M. abscessus isolates were compared using multilocus-sequence typing and pulsed-field gel electrophoresis. Smoke testing was performed to evaluate the potential for aerosol generation and dispersion during HCD use. The entire HCD fleet was replaced to mitigate continued transmission. RESULTS: Clinical presentations of case patients and epidemiologic data supported intraoperative acquisition. M. abscessus was isolated from HCDs used on patients and molecular comparison with patient isolates demonstrated clonality. Smoke testing simulated aerosolization of M. abscessus from HCDs during device operation. Because the HCD fleet was replaced, no additional extrapulmonary HA-Mab infections due to the unique clone identified in this cluster have been detected. CONCLUSIONS: Despite adhering to HCD cleaning and disinfection strategies beyond manufacturer instructions for use, HCDs became colonized with and ultimately transmitted M. abscessus to 3 patients. Design modifications to better contain aerosols or filter exhaust during device operation are needed to prevent NTM transmission events from water-based HCDs.
Asunto(s)
Infección Hospitalaria , Infecciones por Mycobacterium no Tuberculosas , Infecciones por Mycobacterium , Humanos , Infecciones por Mycobacterium no Tuberculosas/epidemiología , Micobacterias no Tuberculosas , Tipificación de Secuencias Multilocus , Brotes de Enfermedades , Infección Hospitalaria/epidemiología , Infecciones por Mycobacterium/epidemiologíaRESUMEN
Isoprostanes (IsoPs) and neuroprostanes (NeuroPs) are formed in vivo by a free radical non-enzymatic mechanism involving peroxidation of arachidonic acid (AA, C20:4 n-6) and docosahexaenoic acid (DHA, C22:6 n-3) respectively. This review summarises our research in the total synthesis of these lipid metabolites, as well as their biological activities and their utility as biomarkers of oxidative stress in humans.
Asunto(s)
Isoprostanos/biosíntesis , Neuroprostanos/biosíntesis , Estrés Oxidativo , Animales , Biomarcadores/metabolismo , Ácidos Grasos Omega-3/metabolismo , Hemodinámica , Humanos , Peroxidación de Lípido , Daño por Reperfusión/metabolismoRESUMEN
Transcatheter aortic valve replacement (TAVR) first received FDA approval for high-risk surgical patients in 2011 and has been approved for low-risk surgical patients since 2019. It is now the most common type of aortic valve replacement, and its use continues to accelerate. Computer modeling and simulation (CM&S) is a tool to aid in TAVR device design, regulatory approval, and indication in patient-specific care. This study introduces a computational fluid-structure interaction (FSI) model of TAVR with Medtronic's CoreValve Evolut R device using the immersed finite element-difference (IFED) method. We perform dynamic simulations of crimping and deployment of the Evolut R, as well as device behavior across the cardiac cycle in a patient-specific aortic root anatomy reconstructed from computed tomography (CT) image data. These IFED simulations, which incorporate biomechanics models fit to experimental tensile test data, automatically capture the contact within the device and between the self-expanding stent and native anatomy. Further, we apply realistic driving and loading conditions based on clinical measurements of human ventricular and aortic pressures and flow rates to demonstrate that our Evolut R model supports a physiological diastolic pressure load and provides informative clinical performance predictions.
Asunto(s)
Estenosis de la Válvula Aórtica , Prótesis Valvulares Cardíacas , Reemplazo de la Válvula Aórtica Transcatéter , Humanos , Reemplazo de la Válvula Aórtica Transcatéter/efectos adversos , Análisis de Elementos Finitos , Válvula Aórtica/diagnóstico por imagen , Válvula Aórtica/cirugía , Diseño de Prótesis , Resultado del TratamientoRESUMEN
We assessed Oxivir Tb wipe disinfectant residue in a controlled laboratory setting to evaluate low environmental contamination of SARS-CoV-2. Frequency of viral RNA detection was not statistically different between intervention and control arms on day 3 (P=0.14). Environmental contamination viability is low; residual disinfectant did not significantly contribute to low contamination.
RESUMEN
Subclinical leaflet thrombosis (SLT) is a potentially serious complication of aortic valve replacement with a bioprosthetic valve in which blood clots form on the replacement valve. SLT is associated with increased risk of transient ischemic attacks and strokes and can progress to clinical leaflet thrombosis. SLT following aortic valve replacement also may be related to subsequent structural valve deterioration, which can impair the durability of the valve replacement. Because of the difficulty in clinical imaging of SLT, models are needed to determine the mechanisms of SLT and could eventually predict which patients will develop SLT. To this end, we develop methods to simulate leaflet thrombosis that combine fluid-structure interaction and a simplified thrombosis model that allows for deposition along the moving leaflets. Additionally, this model can be adapted to model deposition or absorption along other moving boundaries. We present convergence results and quantify the model's ability to realize changes in valve opening and pressures. These new approaches are an important advancement in our tools for modeling thrombosis because they incorporate both adhesion to the surface of the moving leaflets and feedback to the fluid-structure interaction.
Asunto(s)
Estenosis de la Válvula Aórtica , Prótesis Valvulares Cardíacas , Trombosis , Reemplazo de la Válvula Aórtica Transcatéter , Humanos , Válvula Aórtica/cirugía , Reemplazo de la Válvula Aórtica Transcatéter/efectos adversos , Reemplazo de la Válvula Aórtica Transcatéter/métodos , Trombosis/cirugía , Estenosis de la Válvula Aórtica/etiología , Prótesis Valvulares Cardíacas/efectos adversosRESUMEN
Rivers are key pathways for the transfer of microplastics (MP) to marine environments. However, there are considerable uncertainties about the amount of microplastics transported by rivers to the ocean; this results in inaccuracies in our understanding of microplastic quantity and transport by freshwater systems. Additionally, it has been suggested that rivers may represent long-term sinks, with microplastics accumulating in sediment due to their high density or other biological, chemical, and physical factors. The atmosphere is also an important pathway by which airborne microplastics may enter aquatic habitats. Here, we compare for first time microplastics type and concentration in these key environmental mediums (air, water and sediment) along a major river (Ganges), from sea to source to understand 1) the abundance, 2) the spatial distribution, and 3) characteristics. Mean microplastic abundance settling from the atmosphere was 41.12 MP m2 day-1; while concentrations in sediment were 57.00 MP kg-1 and in water were 0.05 MP L-1. Across all sites and environmental mediums, rayon (synthetically altered cellulose) was the dominant polymer (54-82 %), followed by acrylic (6-23 %) and polyester (9-17 %). Fibres were the dominant shape (95-99 %) and blue was the most common colour (48-79 %). Across water and sediment environmental mediums, the number of microplastics per sample increased from the source of the Ganges to the sea. Additionally, higher population densities correlated with increased microplastic abundance for air and water samples. We suggest that clothing is likely to be the prominent source of microplastics to the river system, influenced by atmospheric deposition, wastewater and direct input (e.g. handwashing of clothes in the Ganges), especially in high density population areas. However, we suggest that subsequent microplastic release to the marine environment is strongly influenced by polymer type and shape, with a large proportion of denser microplastics settling in sediment prior to the river discharging to the ocean.
RESUMEN
We present a new discretization approach to advection-diffusion problems with Robin boundary conditions on complex, time-dependent domains. The method is based on second order cut cell finite volume methods introduced by Bochkov et al. [8] to discretize the Laplace operator and Robin boundary condition. To overcome the small cell problem, we use a splitting scheme along with a semi-Lagrangian method to treat advection. We demonstrate second order accuracy in the L 1, L 2, and L ∞ norms for both analytic test problems and numerical convergence studies. We also demonstrate the ability of the scheme to convert one chemical species to another across a moving boundary.
RESUMEN
Importance: Environmental contamination is a source of transmission between patients, health care practitioners, and other stakeholders in the acute care setting. Objective: To compare the efficacy of an enhanced daily disinfection strategy vs standard disinfection in acute care hospital rooms. Design, Setting, and Participants: This randomized clinical trial (RCT) was conducted in acute care hospital rooms at Duke University Hospital in Durham, North Carolina, from November 2021 to March 2022. Rooms were occupied by patients with contact precautions. Room surfaces (bed rails, overbed table, and in-room sink) were divided into 2 sides (right vs left), allowing each room to serve as its own control. Each side was randomized 1:1 to the intervention group or control group. Interventions: The intervention was a quaternary ammonium, salt-based, 24-hour continuously active germicidal wipe. It was applied in addition to routine disinfection for the intervention group. The control group received no intervention beyond routine disinfection. Main Outcomes and Measures: The primary outcome was the total contamination, measured in colony-forming units (CFUs) on the bed rails, overbed table, and sink on study day 1. The secondary outcomes were the proportion of sample areas with positive test results for clinically important pathogens, including methicillin-resistant Staphylococcus aureus, vancomycin-resistant Enterococcus, and carbapenem-resistant Enterobacteriaceae; the similarity in baseline contamination between sample area sides on study day 0 before application of the intervention, and the proportion of sample areas with removed UV luminescent gel on study day 1. Results: A total of 50 study rooms occupied by 50 unique patients (median [IQR] age, 61 [45-69] years; 26 men [52%]) with contact precautions were enrolled. Of these patients, 41 (82%) were actively receiving antibiotics, 39 (78%) were bedridden, and 28 (56%) had active infections with study-defined clinically important pathogens. On study day 1, the median (IQR) total CFUs for the intervention group was lower than that for the control group (3561 [1292-7602] CFUs vs 5219 [1540-12 364] CFUs; P = .002). On study day 1, the intervention side was less frequently contaminated with patient-associated clinically important pathogens compared with the control side of the room (4 [14%] vs 11 [39%]; P = .04). Conclusions and Relevance: Results of this RCT demonstrated that a quaternary ammonium, salt-based, 24-hour continuously active germicidal wipe decreased the environmental bioburden in acute care hospital rooms compared with routine disinfection. The findings warrant large-scale RCTs to determine whether enhanced daily disinfection strategies can decrease patient acquisition and adverse patient outcomes. Trial Registration: ClinicalTrials.gov Identifier: NCT05560321.
Asunto(s)
Compuestos de Amonio , Infección Hospitalaria , Masculino , Humanos , Persona de Mediana Edad , Desinfección/métodos , Infección Hospitalaria/prevención & control , Habitaciones de Pacientes , HospitalesRESUMEN
While land-based sources of plastic pollution have gained increasing attention in recent years, ocean-based sources have been less well studied. The aim of this study was to compare a variety of ropes (differing in age, wear surface and material) to quantify and characterise the production of microplastic during use. This was achieved by simulating, in laboratory and field experiments, rope hauling activity which is typically performed on board maritime vessels, such as fishing boats. Microplastic generation was quantified by collecting fragments that were released as a consequence of abrasion. Notably, we show that microplastic fragments generated from rope wear during use were characteristically irregular in shape, rather than fibrous such as those assigned to synthetic rope by previous studies. Therefore, we suggest that some of the plastic fragments found in the marine environment may have been falsely attributed to land-based sources but have in fact arisen form the abrasion of rope. Our research found that new and one-year old polypropylene rope released significantly fewer microplastic fragments (14 ± 3 and 22 ± 5) and less microplastic mass (11 ± 2 and 12 ± 3 µg) per metre hauled compared to ropes of two (720 ± 51, 247 ± 18 µg) or ten (767 ± 55, 1052 ± 75 µg) years of age. We show that a substantial amount of microplastic contamination is likely to directly enter the marine environment due to in situ rope abrasion and that rope age is an important factor influencing microplastic release. Our research suggests the need for standards on rope maintenance, replacement, and recycling along with innovation in synthetic rope design with the aim to reduce microplastic emission.
Asunto(s)
Microplásticos , Contaminantes Químicos del Agua , Monitoreo del Ambiente , Contaminación Ambiental , Industrias , Plásticos , Polipropilenos , Contaminantes Químicos del Agua/análisisRESUMEN
Background: Patients with Clostridioides difficile infections (CDIs) contaminate the healthcare environment; however, the relative contribution of contamination by colonized individuals is unknown. Current guidelines do not recommend the use of contact precautions for asymptomatic C difficile carriers. We evaluated C difficile environmental contamination in rooms housing adult inpatients with diarrhea based on C difficile status. Methods: We performed a prospective cohort study of inpatient adults with diarrhea who underwent testing for CDI via polymerase chain reaction (PCR) and enzyme immunoassay (EIA). Patients were stratified into cohorts based on test result: infected (PCR+/EIA+), colonized (PCR+/EIA-), or negative/control (PCR-). Environmental microbiological samples were taken within 24 hours of C difficile testing and again for 2 successive days. Samples were obtained from the patient, bathroom, and care areas. Results: We enrolled 94 patients between November 2019 and June 2021. Clostridioides difficile was recovered in 93 (38%) patient rooms: 44 (62%) infected patient rooms, 35 (43%) colonized patient rooms (Pâ =â .08 vs infected 38 patient rooms), and 14 (15%) negative patient rooms (Pâ <â .01 vs infected; Pâ <â .01 vs colonized). Clostridioides difficile was recovered in 40 (56%), 6 (9%), and 20 (28%) of bathrooms, care areas and patient areas in 40 infected patient rooms; 34 (41%), 1 (1%), and 4 (5%) samples in colonized patient rooms; and 12 (13%), 1 (1%), and 3 (3%) of samples in negative patient rooms, respectively. Conclusions: Patients colonized with C difficile frequently contaminated the hospital environment. Our data support the use of contact precautions when entering rooms of patients colonized with C difficile, especially when entering the bathroom.
RESUMEN
The transport of lymph through the lymphatic vasculature is the mechanism for returning excess interstitial fluid to the circulatory system, and it is essential for fluid homeostasis. Collecting lymphatic vessels comprise a significant portion of the lymphatic vasculature and are divided by valves into contractile segments known as lymphangions. Despite its importance, lymphatic transport in collecting vessels is not well understood. We present a computational model to study lymph flow through chains of valved, contracting lymphangions. We used the Navier-Stokes equations to model the fluid flow and the immersed boundary method to handle the two-way, fluid-structure interaction in 2D, non-axisymmetric simulations. We used our model to evaluate the effects of chain length, contraction style, and adverse axial pressure difference (AAPD) on cycle-mean flow rates (CMFRs). In the model, longer lymphangion chains generally yield larger CMFRs, and they fail to generate positive CMFRs at higher AAPDs than shorter chains. Simultaneously contracting pumps generate the largest CMFRs at nearly every AAPD and for every chain length. Due to the contraction timing and valve dynamics, non-simultaneous pumps generate lower CMFRs than the simultaneous pumps; the discrepancy diminishes as the AAPD increases. Valve dynamics vary with the contraction style and exhibit hysteretic opening and closing behaviors. Our model provides insight into how contraction propagation affects flow rates and transport through a lymphangion chain.
Asunto(s)
Linfa/fisiología , Sistema Linfático/fisiología , Vasos Linfáticos/fisiología , Animales , Simulación por Computador , Diástole , Elasticidad , Homeostasis , Humanos , Linfangiogénesis , Modelos Biológicos , Contracción Muscular , Músculo Liso , Presión , Ratas , Análisis de Regresión , Reología , Sístole , Factores de TiempoRESUMEN
Microplastics (plastic < 5 mm in size) are now known to contaminate riverine systems but understanding about how their concentrations vary spatially and temporally is limited. This information is critical to help identify key sources and pathways of microplastic and develop management interventions. This study provides the first investigation of microplastic abundance, characteristics and temporal variation along the Ganges river; one of the most important catchments of South Asia. From 10 sites along a 2575 km stretch of the river, 20 water samples (3600 L in total) were filtered (60 samples each from pre- and post-monsoon season). Overall, 140 microplastic particles were identified, with higher concentrations found in the pre-monsoon (71.6%) than in post-monsoon (61.6%) samples. The majority of microplastics were fibres (91%) and the remaining were fragments (9%). We estimate that the Ganges, with the combined flows of the Brahmaputra and Meghna rivers (GBM), could release up to 1-3 billion (109) microplastics into the Bay of Bengal (north-eastern portion of the Indian Ocean) every day. This research provides the first step in understanding microplastic contamination in the Ganges and its contribution to the oceanic microplastic load.
Asunto(s)
Microplásticos , Contaminantes Químicos del Agua , Asia , Monitoreo del Ambiente , Océano Índico , Plásticos , Ríos , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
The washing of synthetic clothes is considered to be a substantial source of microplastic to the environment. Therefore, various devices have been designed to capture microfibres released from clothing during the washing cycle. In this study, we compared 6 different devices which varied from prototypes to commercially available products. These were designed to either be placed inside the drum during the washing cycle or fitted externally to filter the effluent wastewater discharge. The aim of this study was to examine the efficacy of these devices at mitigating microfibre release from clothing during washing or at capturing any microfibres released in the wastewater. When compared to the amount of microfibres entering the wastewater without any device (control), the XFiltra filter was the most successful device. This device captured microfibres reducing their release to wastewater by around 78%. The Guppyfriend bag was the second most successful device, reducing microfibre release to wastewater by around 54%; it appeared to mainly work by reducing microfibre shedding from the clothing during the washing cycle. Despite some potentially promising results it is important to recognise that fibres are also released when garments are worn in everyday use. Researchers and industry need to continue to collaborate to better understand the best intervention points to reduce microfibre shedding, by considering both product design and fibre capture.