Room-temperature quantum optomechanics using an ultralow noise cavity.

At room temperature, mechanical motion driven by the quantum backaction of light has been observed only in pioneering experiments in which an optical restoring force controls the oscillator stiffness1,2. For solid-state mechanical resonators in which oscillations are controlled by the material rigidity, the observation of these effects has been hindered by low mechanical quality factors, optical cavity frequency fluctuations3, thermal intermodulation noise4,5 and photothermal instabilities. Here we overcome these challenges with a phononic-engineered membrane-in-the-middle system. By using phononic-crystal-patterned cavity mirrors, we reduce the cavity frequency noise by more than 700-fold. In this ultralow noise cavity, we insert a membrane resonator with high thermal conductance and a quality factor (Q) of 180 million, engineered using recently developed soft-clamping techniques6,7. These advances enable the operation of the system within a factor of 2.5 of the Heisenberg limit for displacement sensing8, leading to the squeezing of the probe laser by 1.09(1) dB below the vacuum fluctuations. Moreover, the long thermal decoherence time of the membrane oscillator (30 vibrational periods) enables us to prepare conditional displaced thermal states of motion with an occupation of 0.97(2) phonons using a multimode Kalman filter. Our work extends the quantum control of solid-state macroscopic oscillators to room temperature.

Clamp-Tapering Increases the Quality Factor of Stressed Nanobeams.

Stressed nanomechanical resonators are known to have exceptionally high quality factors ( Q) due to the dilution of intrinsic dissipation by stress. Typically, the amount of dissipation dilution and thus the resonator Q is limited by the high mode curvature region near the clamps. Here we study the effect of clamp geometry on the Q of nanobeams made of high-stress Si3N4. We find that tapering the beam near the clamps, thus locally increasing the stress, leads to an increased Q of MHz-frequency low order modes due to enhanced dissipation dilution. Contrary to recent studies of tethered-membrane resonators, we find that widening the clamps leads to a decreased Q despite increased stress in the beam bulk. The tapered-clamping approach has practical advantages compared to the recently developed "soft-clamping" technique, as it enhances the Q of the fundamental mode and can be implemented without increasing the device size.

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution.

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by four orders of magnitude, surpassing the previous state of the art achieved in bulk crystalline resonators at room temperature and liquid helium temperatures. In this Review, we describe how these advances were made by leveraging 'dissipation dilution'-where dissipation is reduced through a combination of static tensile strain and geometric nonlinearity in dynamic strain. We then review the state of the art in strained nanomechanical resonators and discuss the potential for even higher quality factors in crystalline materials. Finally, we detail current and future applications of dissipation-diluted mechanical resonators.

Microwave-to-optical conversion with a gallium phosphide photonic crystal cavity.

Electrically actuated optomechanical resonators provide a route to quantum-coherent, bidirectional conversion of microwave and optical photons. Such devices could enable optical interconnection of quantum computers based on qubits operating at microwave frequencies. Here we present a platform for microwave-to-optical conversion comprising a photonic crystal cavity made of single-crystal, piezoelectric gallium phosphide integrated on pre-fabricated niobium circuits on an intrinsic silicon substrate. The devices exploit spatially extended, sideband-resolved mechanical breathing modes at ~3.2 GHz, with vacuum optomechanical coupling rates of up to g0/2π ≈ 300 kHz. The mechanical modes are driven by integrated microwave electrodes via the inverse piezoelectric effect. We estimate that the system could achieve an electromechanical coupling rate to a superconducting transmon qubit of ~200 kHz. Our work represents a decisive step towards integration of piezoelectro-optomechanical interfaces with superconducting quantum processors.