RESUMEN
BACKGROUND: Variants that regulate transcription, such as expression quantitative trait loci (eQTL), have shown enrichment in genome-wide association studies (GWAS) for mammalian complex traits. However, no study has reported eQTL in sheep, although it is an important agricultural species for which many GWAS of complex meat traits have been conducted. Using RNA sequence data produced from liver and muscle from 149 sheep and imputed whole-genome single nucleotide polymorphisms (SNPs), our aim was to dissect the genetic architecture of the transcriptome by associating sheep genotypes with three major molecular phenotypes including gene expression (geQTL), exon expression (eeQTL) and RNA splicing (sQTL). We also examined these three types of eQTL for their enrichment in GWAS of multi-meat traits and fatty acid profiles. RESULTS: Whereas a relatively small number of molecular phenotypes were significantly heritable (h2 > 0, P < 0.05), their mean heritability ranged from 0.67 to 0.73 for liver and from 0.71 to 0.77 for muscle. Association analysis between molecular phenotypes and SNPs within ± 1 Mb identified many significant cis-eQTL (false discovery rate, FDR < 0.01). The median distance between the eQTL and transcription start sites (TSS) ranged from 68 to 153 kb across the three eQTL types. The number of common variants between geQTL, eeQTL and sQTL within each tissue, and the number of common variants between liver and muscle within each eQTL type were all significantly (P < 0.05) larger than expected by chance. The identified eQTL were significantly (P < 0.05) enriched in GWAS hits associated with 56 carcass traits and fatty acid profiles. For example, several geQTL in muscle mapped to the FAM184B gene, hundreds of sQTL in liver and muscle mapped to the CAST gene, and hundreds of sQTL in liver mapped to the C6 gene. These three genes are associated with body composition or fatty acid profiles. CONCLUSIONS: We detected a large number of significant eQTL and found that the overlap of variants between eQTL types and tissues was prevalent. Many eQTL were also QTL for meat traits. Our study fills a gap in the knowledge on the regulatory variants and their role in complex traits for the sheep model.
Asunto(s)
Hígado/metabolismo , Músculo Esquelético/metabolismo , Polimorfismo Genético , Sitios de Carácter Cuantitativo , Carne Roja/normas , Ovinos/genética , Animales , Ácidos Grasos/metabolismo , Femenino , Masculino , Carácter Cuantitativo Heredable , TranscriptomaRESUMEN
Previous studies have shown reduced enteric methane emissions (ME) and residual feed intake (RFI) through the application of genomic selection in ruminants. The objective of this study was to evaluate feeding behaviour traits as genetic indicators for ME and RFI in Australian Maternal Composite ewes using data from an automated feed intake facility. The feeding behaviour traits evaluated were the amount of time spent eating per day (eating time; ETD; min/day) and per visit (eating time per event; ETE; min/event), daily number of events (DNE), event feed intake (EFI; g/event) and eating rate (ER; g/min). Genotypes and phenotypes of 445 ewes at three different ages (post-weaning, hogget, and adult) were used to estimate the heritability of ME, RFI, and the feeding behaviour traits using univariate genomic best linear unbiased prediction models. Multivariate models were used to estimate the correlations between these traits and within each trait at different ages. The response to selection was evaluated for ME and RFI with direct selection models and indirect models with ETE as an indicator trait, as this behaviour trait was a promising indicator based on heritability and genetic correlations. Heritabilities were between 0.12 and 0.18 for ME and RFI, and between 0.29 and 0.47 for the eating behaviour traits. In our data, selecting for more efficient animals (low RFI) would lead to higher methane emissions per day and per kg of dry matter intake. Selecting for more ETE also improves feed efficiency but results in more methane per day and per kg dry matter intake. Based on our results, ETE could be evaluated as an indicator trait for ME and RFI under an index approach that allows simultaneous selection for improvement in emissions and feed efficiency. Selecting for ETE may have a tremendous impact on the industry, as it may be easier and cheaper to obtain than feed intake and ME data. As the data were collected using individual feeding units, the findings on this research should be validated under grazing conditions.
RESUMEN
Dystocia contributes to lamb and ewe mortality in the periparturient period but impacts for extensive sheep production systems remain poorly understood. Here we show that lamb and ewe mortality associated with dystocia has important impacts on sheep production in Australia and New Zealand, and quantify financial impacts for the Australian sheep industry. A systematic review of the literature identified 11 publications published since 1990 that reported sheep mortality due to dystocia in Australia or New Zealand. Assumptions for ewe breeding flock structure and reproductive performance were based on Australian sheep industry data. The proportion of lamb mortality attributable to dystocia (including stillbirths and perinatal deaths with evidence of hypoxic injury) pooled across all studies (pooled proportional mortality ratio) was 47 % (95 % Confidence Interval (CI): 38, 55). Pooled proportional mortality ratio for Australian studies was 53 % (95 %CI: 47, 60), and for New Zealand studies was 35 % (95 %CI: 19, 51). Pooled proportional mortality ratio was similar for lambs born to Merino and non-Merino ewes, although more data are needed to determine effects of ewe breed independent of other factors. Pooled proportional mortality ratio was higher for single lambs (59 %; 95 % CI: 55, 63) than twin (47 %; 41, 54) or triplet (49 %; 46, 52) lambs. However, the number of dystocia-associated mortalities is higher for twin-born lambs than for singles because total mortality is higher for twin-born lambs. It is estimated that approximately 7.7 million lamb deaths and 297,500 ewe deaths per year are attributable to dystocia in Australia for the national flock of 38 million breeding ewes. The whole-farm bio-economic Model of an Integrated Dryland Agricultural System (MIDAS) was used to determine the impacts of dystocia-associated ewe and lamb mortality on Australian farm profit. Dystocia is estimated to reduce Australian national farm profit by AU$780 million or $23.00 per ewe mated based on an assumed lamb sale price of AU$6.50 per kg carcass weight. These estimates do not include the costs of reduced productivity for surviving ewes and lambs, intervention, post-farmgate impacts, delayed genetic progress, or impacts on animal welfare and access into sheep meat and wool markets. Reducing dystocia through improved genetics and sheep management will improve animal welfare and farm profit.
Asunto(s)
Distocia , Enfermedades de las Ovejas , Animales , Australia/epidemiología , Distocia/mortalidad , Distocia/veterinaria , Granjas/economía , Femenino , Modelos Económicos , Nueva Zelanda/epidemiología , Embarazo , Ovinos , Enfermedades de las Ovejas/epidemiología , Enfermedades de las Ovejas/mortalidad , Oveja DomésticaRESUMEN
Advances in genomics and technology measuring body composition are now allowing sheep producers to select directly for increased lean meat yield (LMY) using Australian Sheep Breeding Values (ASBV). This experiment evaluated the impact of sire LMY ASBV on carcass composition, meat quality, nutrient and mineral content for lambs reared at pasture and finished in a feedlot. A 1% unit increase in sire LMY ASBV resulted in progeny that were leaner (0.8%) and had less fat (1.0%) on carcass. There was also a 0.2% reduction in the intramuscular fat content, a 3.2 N increase in meat toughness determined by shear force at day 5 ageing, a reduction in the redness of the fresh meat and a lower iron content. It is concluded that Australian sheep producers will need to incorporate ASBVs for other aspects of meat quality when selecting sires with increased LMY to avoid deterioration in meat quality, nutritional content of lamb and fresh meat colour.
Asunto(s)
Composición Corporal , Cruzamiento , Carne Roja/análisis , Oveja Doméstica/genética , Animales , Australia , Color , Femenino , Hierro/análisis , Masculino , Resistencia al Corte , Oveja Doméstica/crecimiento & desarrolloRESUMEN
The development of feeding systems that can individually measure and control feed intake in a group-housed environment would allow a greater understanding of sheep intake without compromising animal welfare and behavior through the removal of social interactions between sheep. This study validated an automated feeding system for measuring feed intake of individual sheep when housed in groups. Validation of the feeding system was conducted during three separate experiments. The validation sampling involved the activation of four individual "feed events," whereby four separate samples weighing approximately 50, 100, 200, and 400 g were removed from each feeder, with each feed event being linked to a specific radio frequency identification (RFID) tag. The feeder validation experiments evaluated the ability of the feeding system to 1) create a unique feed event every time a sample of pellets was collected from the feeder, 2) link the feed event to the correct RFID, and 3) accurately record the weight of feed that was manually removed. All feed events were initiated and logged in the feeding system with 100% of the events being linked to the correct test RFID. Concordance correlation coefficients between the feeding system-recorded feed weight and the manually removed weight were 0.99 within all three experiments. There was also no overall and little level-dependent bias between the weights measured by the feeding system and weights measured on the external scales. These results indicate the stability of the feeding system over time and consistency between the feeders within and across the three experiments. In conclusion, the automated feeding system developed for measuring individual animal feed intake was able to detect and record the unique electronic RFID associated with unique feed events and accurately capture the weight of feed removed. Furthermore, there was no change in the accuracy of the system from the start to the end of experimental periods, and the amount of feed removed in the feed event (or meal size) did not impact the accuracy of the results.