One-pot synthesis of block copolymers in supercritical carbon dioxide: a simple versatile route to nanostructured microparticles.

We present a one-pot synthesis for well-defined nanostructured polymeric microparticles formed from block copolymers that could easily be adapted to commercial scale. We have utilized reversible addition-fragmentation chain transfer (RAFT) polymerization to prepare block copolymers in a dispersion polymerization in supercritical carbon dioxide, an efficient process which uses no additional solvents and hence is environmentally acceptable. We demonstrate that a wide range of monomer types, including methacrylates, acrylamides, and styrenics, can be utilized leading to block copolymer materials that are amphiphilic (e.g., poly(methyl methacrylate)-b-poly(N,N-dimethylacrylamide)) and/or mechanically diverse (e.g., poly(methyl methacrylate)-b-poly(N,N-dimethylaminoethylmethacrylate)). Interrogation of the internal structure of the microparticles reveals an array of nanoscale morphologies, including multilayered, curved cylindrical, and spherical domains. Surprisingly, control can also be exerted by changing the chemical nature of the constituent blocks and it is clear that selective CO(2) sorption must strongly influence the block copolymer phase behavior, resulting in kinetically trapped morphologies that are different from those conventionally observed for block copolymer thin films formed in absence of CO(2).

Schizophrenic behavior of a thermoresponsive double hydrophilic diblock copolymer at the air-water interface.

The thermoresponsive behavior of the rhodamine B end-labeled double hydrophilic block copolymer (DHBC) poly(N,N-dimethylacrylamide)-b-poly(N,N-diethylacrylamide) (RhB-PDMA(207)-b-PDEA(177)) and the 1:1 segmental mixture of PDEA and rhodamine B end-labeled PDMA homopolymers was studied over the range of 10-40 degrees C at the air-water interface. The increase in collapse surface pressure (second plateau regime) of the DHBC with temperature confirms the thermoresponsiveness of PDEA at the interface. The sum of the pi-A isotherms of the two single homopolymers weighted by composition closely follows the pi-A isotherm of the DHBC, suggesting that the behavior of each block of the DHBC is not influenced by the presence of the other block. Langmuir-Blodgett monolayers of DHBC deposited on glass substrates were analyzed by laser scanning confocal fluorescence microscopy (LSCFM), showing schizophrenic behavior: at low temperature, the RhB-PDMA block dominates the inside of bright (core) microdomains, switching to the outside (shell) at temperatures above the lower critical solution temperature (LCST) of PDEA. This core-shell inversion triggered by the temperature increase was not detected in the homopolymer mixture. The present results suggest that both the covalent bond between the two blocks of the DHBC and the tendency of rhodamine B to aggregate play a role in the formation of the bright cores at low temperature whereas PDEA thermoaggregation is responsible for the formation of the dark cores above the LCST of PDEA.

Synthesis and applications of Rhodamine derivatives as fluorescent probes.

Rhodamine dyes are widely used as fluorescent probes owing to their high absorption coefficient and broad fluorescence in the visible region of electromagnetic spectrum, high fluorescence quantum yield and photostability. A great interest in the development of new synthetic procedures for preparation of Rhodamine derivatives has arisen in recent years because for most applications the probe must be covalently linked to another (bio)molecule or surface. In this critical review the strategies for modification of Rhodamine dyes and a discussion on the variety of applications of these new derivatives as fluorescent probes are given (108 references).

Effect of the microstructure of n-butyl acrylate/N-isopropylacrylamide copolymers on their thermo-responsiveness, self-organization and gel properties in water.

HYPOTHESIS: Polymer composition, microstructure, molar mass, architecture… critically affect the properties of thermoresponsive polymers in aqueous media. EXPERIMENTS: The behaviour of n-isopropylacrylamide and n-butyl acrylate-based copolymers of variable composition and structure (statistical, diblock or triblock) was studied in solution at different temperatures and concentrations with turbidimetry measurements, differential scanning calorimetry, electronic microscopy, rheology and scattering experiments. FINDINGS: This study illustrates how it is possible through chemical engineering of the microstructure of amphiphilic thermoresponsive polymers to modulate significantly the self-assembly, morphological and mechanical properties of these materials in aqueous media. Statistical structures induced a strong decrease of cloud point temperature compared to block structures with similar composition. Moreover, block structures lead below the transition temperature to the formation of colloidal structures. Above the transition temperature, the formation of colloidal aggregates is observed at low concentrations, and at higher concentrations the formation of gels. Neutron scattering and light scattering measurements show that for a given composition diblock structures lead to smaller colloids and mesoglobules than their triblock counterparts. Moreover, diblock structures, compared to triblock analogs, allow the formation of gels that do not demix with time (no synaeresis) but that are softer than triblock gels.

Colloidal systems for drug delivery: from design to therapy.

Nanomedicine, or medicine using nanometric devices, has emerged in the past decade as an exhilarating domain that can help to solve a number of problems linked to unsatisfactory therapeutic responses of so-called 'old drugs'. This dissatisfaction stems from inadequate biodistribution after a drug's application, which leads to a limited therapeutic response but also to numerous side effects to healthy organs. The biodistribution of drugs encapsulated in a nano object that will act as a vector can be modified to tune its therapeutic efficacy. This review provides a general overview of existing colloidal nanovectors: liposomes, polymeric micelles, polymeric vesicles, polymeric nanoparticles (NPs), and dendrimers. We describe their characteristics, advantages and drawbacks, and discuss their use in the treatment of various diseases.

Thermoresponsive poly(N-vinyl caprolactam)-coated gold nanoparticles: sharp reversible response and easy tunability.

Narrowly distributed poly(N-vinyl caprolactam) obtained by the MADIX/RAFT process was used for the preparation of novel thermoresponsive gold nanoparticles presenting a sharp reversible response to temperature, which can be easily modulated near the physiological temperature by simply changing the polymer molecular weight or concentration.

Fluorescence anisotropy of hydrophobic probes in poly(N-decylacrylamide)-block-poly(N,N-diethylacrylamide) block copolymer aqueous solutions: evidence of premicellar aggregates.

Fluorescent probes, coumarin 153 (C153) and octadecylrhodamine B (ORB), were used to study the self-assembly in water of poly(N-decylacrylamide)-block-poly(N,N-diethylacrylamide), (PDcA(11)-block-PDEA(295); M(n) = 40 300 g mol(-1); M(w)/M(n) = 1.01). From the variation of both the fluorescence intensity and the solvatochromic shifts of C153 with polymer concentration, the critical micelle concentration (CMC) was determined as 1.8 +/- 0.1 microM. On the other hand, steady-state anisotropy measurements showed the presence of premicellar aggregates below the CMC. Time-resolved fluorescence anisotropy evidenced that ORB is located in the premicellar aggregates and the micelle core, while C153 is partitioned between the aggregates and the water phase. The micelle core contains both semicrystalline and amorphous regions. In the semicrystalline regions the probes cannot rotate, while in the amorphous regions the rotational correlation times correlate well with the hydrodynamic volume of the probes. The amorphous region of the micelle core is relatively fluid, reflecting the large free-volume accessible to the probes.

Thermo-responsiveness of poly(N,N-diethylacrylamide) polymers at the air-water interface: The effect of a hydrophobic block.

The poly(N,N-diethylacrylamide) (h-PDEA) homopolymer and the poly(N-decylacrylamide)-b-PDEA (PDcA(11)-b-PDEA(231)) diblock copolymer were studied in the range of 10 to 40 degrees C, at the air-water interface. The pi-A isotherms of h-PDEA appear nearly invariant with temperature while the pi-A isotherms of PDcA(11)-b-PDEA(231) deviate significantly to lower areas with the temperature increase evidencing the thermo-responsiveness of this diblock copolymer at the interface. For the copolymer, the limiting area per segment versus temperature shows a break point around 29 degrees C, slightly lower than the lower critical solution temperature (LCST) of h-PDEA in water (31-33 degrees C). AFM images of LB monolayers transferred at 40 degrees C revealed for both polymers the presence of hydrophobic aggregates due to the conformational changes (collapse) of chains that occur at the LCST. Differences in the morphology of these aggregates, flat irregular structures for h-PDEA and round-shaped domains for PDcA(11)-b-PDEA(231), were related with the condensing effect of the hydrophobic block. The PDcA(11) block, anchoring the polymer to the interface, ensures a better stability and cohesion to the film and preserves the thermo-sensitivity of the h-PDEA at the interface.

Thin films of hydrophobically modified poly(N,N-dimethylacrylamide).

The behavior of a poly(N,N-dimethylacrylamide) hydrophobically modified by incorporating 0.33 mol % of a pyrenyl derivative, [4-(1-pyrenyl)butyl]amine hydrochloride (PY) and 3.56 mol % of dodecylamine (DO) has been studied at the air/water interface. Surface pressure-area isotherm measurements show that the film is initially anchored by the hydrophobic groups at the air-water interface with a pancake-like structure and, with increasing surface pressure, evolves to a quasi mushroom structure, finally reaching a brush configuration at high pressures. Monolayers of this polymer were transferred to silica substrates using the Langmuir-Blodgett (LB) technique at 5, 15, and 25 mN.m(-1). The properties of the LB films were studied by steady-state and time-resolved fluorescence as well as by atomic force microscopy. The results show that the aggregates formed at low pressures are disrupted by pressure increase, while the water-soluble poly(N,N-dimethylacrylamide) becomes dissolved in the water subphase.