Reduced Monocyte and Neutrophil Infiltration and Activation by P-Selectin/CD62P Inhibition Enhances Thrombus Resolution in Mice.

BACKGROUND: Venous thromboembolism is a major health problem. After thrombus formation, its resolution is essential to re-establish blood flow, which is crucially mediated by infiltrating neutrophils and monocytes in concert with activated platelets and endothelial cells. Thus, we aimed to modulate leukocyte function during thrombus resolution post-thrombus formation by blocking P-selectin/CD62P-mediated cell interactions. METHODS: Thrombosis was induced by inferior vena cava stenosis through ligation in mice. After 1 day, a P-selectin-blocking antibody or isotype control was administered and thrombus composition and resolution were analyzed. RESULTS: Localizing neutrophils and macrophages in thrombotic lesions of wild-type mice revealed that these cells enter the thrombus and vessel wall from the caudal end. Neutrophils were predominantly present 1 day and monocytes/macrophages 3 days after vessel ligation. Blocking P-selectin reduced circulating platelet-neutrophil and platelet-Ly6Chigh monocyte aggregates near the thrombus, and diminished neutrophils and Ly6Chigh macrophages in the cranial thrombus part compared with isotype-treated controls. Depletion of neutrophils 1 day after thrombus initiation did not phenocopy P-selectin inhibition but led to larger thrombi compared with untreated controls. In vitro, P-selectin enhanced human leukocyte function as P-selectin-coated beads increased reactive oxygen species production by neutrophils and tissue factor expression of classical monocytes. Accordingly, P-selectin inhibition reduced oxidative burst in the thrombus and tissue factor expression in the adjacent vessel wall. Moreover, blocking P-selectin reduced thrombus density determined by scanning electron microscopy and increased urokinase-type plasminogen activator levels in the thrombus, which accelerated caudal fibrin degradation from day 3 to day 14. This accelerated thrombus resolution as thrombus volume declined more rapidly after blocking P-selectin. CONCLUSIONS: Inhibition of P-selectin-dependent activation of monocytes and neutrophils accelerates venous thrombosis resolution due to reduced infiltration and activation of innate immune cells at the site of thrombus formation, which prevents early thrombus stabilization and facilitates fibrinolysis.

Hard Block Degradable Polycarbonate Urethanes: Promising Biomaterials for Electrospun Vascular Prostheses.

We report biodegradable thermoplastic polyurethanes for soft tissue engineering applications, where frequently used carboxylic acid ester degradation motifs were substituted with carbonate moieties to achieve superior degradation properties. While the use of carbonates in soft blocks has been reported, their use in hard blocks of thermoplastic polyurethanes is unprecedented. Soft blocks consist of poly(hexamethylene carbonate), and hard blocks combine hexamethylene diisocyanate with the newly synthesized cleavable carbonate chain extender bis(3-hydroxypropylene)carbonate (BHPC), mimicking the motif of poly(trimethylene carbonate) with highly regarded degradation properties. Simultaneously, the mechanical benefits of segmented polyurethanes are exploited. A lower hard block concentration in BHPC-based polymers was more suitable for vascular grafts. Nonacidic degradation products and hard block dependent degradation rates were found. Implantation of BHPC-based electrospun degradable vascular prostheses in a small animal model revealed high patency rates and no signs of aneurysm formations. Specific vascular graft remodeling and only minimal signs of inflammatory reactions were observed.

Long Term Evaluation of Nanofibrous, Bioabsorbable Polycarbonate Urethane Grafts for Small Diameter Vessel Replacement in Rodents.

OBJECTIVE: Biodegradable materials for in situ vascular tissue engineering could meet the increasing clinical demand for sufficient synthetic small diameter vascular substitutes in aortocoronary bypass and peripheral vascular surgery. The aim of this study was to design a new degradable thermoplastic polycarbonate urethane (dPCU) with improved biocompatibility and optimal biomechanical properties. Electrospun conduits made from dPCU were evaluated in short and long term follow up and compared with expanded polytetrafluoroethylene (ePTFE) controls. METHODS: Both conduits were investigated prior to implantation to assess their biocompatibility and inflammatory potential via real time polymerase chain reaction using a macrophage culture. dPCU grafts (n = 28) and ePTFE controls (n = 28) were then implanted into the infrarenal abdominal aorta of Sprague-Dawley rats. After seven days, one, six, and 12 months, grafts were analysed by histology and immunohistochemistry (IHC) and assessed biomechanically. RESULTS: Anti-inflammatory signalling was upregulated in dPCU conduits and increased significantly over time in vitro. dPCU and ePTFE grafts offered excellent long and short term patency rates (92.9% in both groups at 12 months) in the rat model without dilatation or aneurysm formation. In comparison to ePTFE, dPCU grafts showed transmural ingrowth of vascular specific cells resulting in a structured neovessel formation around the graft. The graft material was slowly reduced, while the compliance of the neovessel increased over time. CONCLUSION: The newly designed dPCU grafts have the potential to be safely applied for in situ vascular tissue engineering applications. The degradable substitutes showed good in vivo performance and revealed desirable characteristics such as biomechanical stability, non-thrombogenicity, and minimal inflammatory response after long term implantation.

miR-182-5p Inhibition Ameliorates Ischemic Acute Kidney Injury.

Acute kidney injury (AKI) remains a major clinical event with high mortality rates. We previously identified renal miR-182 as the main driver of post-transplantation AKI. Therefore, we tested the causal inference of miR-182 by inhibiting its renal expression in vivo. In 45 rats AKI was induced by right nephrectomy and contralateral clamping of the renal pedicle for 40 minutes. Systemically administered antisense oligonucleotide (ASO) inhibited miR-182 in the kidneys up to 96 hours. The maximum creatinine elevation was on day 2 after injury (mg/dL; median and interquartile range): ASO 2.5mg/kg: 1.9 (1.3; 3.2), ASO 25mg/kg: 2.8 (0.7; 5.0), mismatch oligonucleotide (MM) 25mg/kg: 5.7 (5,0; 5.8), saline: 4.4 (3.5; 5.8) (P = 0.016, analysis of variance). Blinded semiquantitative histologic evaluation of renal biopsies showed better preserved morphology in both ASO groups than saline- and MM-treated kidneys (median and interquartile range of overall injury scores): ASO both concentrations 1 (1, 1), saline 3 (3, 3) and MM 3 (3, 3) (P< 0.001, analysis of variance). ASO facilitated cell proliferation, metabolism, and angiogenesis on a genome-wide level. ASO when applied in normothermic kidney machine perfusion reduced renal miR-182 expression by more than two magnitudes. In summary, we showed that in vivo inhibition of miR-182 by ASO improved kidney function and morphology after AKI. This technique may be applicable to reduce the high rate of AKI in the human renal transplantation setting.

Preserved right ventricular integrity in a new telemetric rat model of severe pulmonary hypertension.

Telemetric monitoring of hemodynamic parameters has become an established standard in experimental models of pulmonary arterial hypertension (PAH). To that purpose, a dedicated catheter is usually implanted through the right ventricular wall of study animals. Drawbacks of this standard technique are as follows: obtained pressures are from the right ventricle and therefore only surrogates for pulmonary arterial pressures, and furthermore, right ventricular myocardium is always damaged to a certain degree. To overcome shortcomings of standard hemodynamic assessment, we modified an established rat model, where severe PAH is induced by left-sided pneumonectomy plus monocrotaline injection. We describe here a novel telemetry catheter implantation technique, where the device is advanced into the pulmonary artery via the remaining stump and the transmitter is placed in a subcutaneous pocket. A total of 105 rats were operated with a median (range) implantation time of 50 (30-88) min and an excellent perioperative survival of 93%. After monocrotaline induction on day 7, animals developed severe PAH with mean ± SD pressures of 75.9 ± 18.6 (systolic), 55.0 ± 18.0 (mean), and 42.1 ± 21.3 mmHg (diastolic) after 4 wk. Postmortem, the animals showed severe right ventricular hypertrophy, and histological analysis confirmed excessive medial hypertrophy and intimal hyperplasia, both characteristic features of human PAH. Comparison of the new telemetric model with standard microtip catheterization did not show relevant measurement differences. We established the first experimental animal model for PAH with preserved right ventricular integrity that allows direct telemetric monitoring of real-time systolic, mean, and diastolic pressures in the main pulmonary artery of freely moving rats.

An experimental animal model for percutaneous procedures used in trigeminal neuralgia.

OBJECT: This study describes an experimental rabbit model that allows the reproduction of percutaneous operations that are used in patients with trigeminal neuralgia (TN). Attention was given to an exact anatomical description of the rabbit's middle cranial fossa as well as the establishment of conditions for a successful procedure. METHODS: Morphometric measurements were taken from 20 rabbit skulls and CT scans. The anatomy of the trigeminal nerve, as well as its surrounding structures, was assessed by bilateral dissection of 13 New Zealand white rabbits (NWR). An ideal approach of placing a needle through the foramen ovale to reach the TG was sought. Validation of correct placement was realized by fluoroscopy and confirmed by dissection. RESULTS: Precise instructions for successful reproduction of percutaneous procedures in NWR were described. According to morphological measurements, for balloon compression of the trigeminal ganglion (TG) the maximal diameter of an introducing cannula is 1.85 mm. The diameter of an empty balloon catheter should not exceed 1.19 mm, and the length of the inflatable part of the balloon can range up to 4 mm. For thermocoagulation the needle electrodes must not exceed an external diameter of 1.39, mm and the length of the non-insolated tip can range up to 4 mm. Glycerol rhizolysis can be achieved because the trigeminal cistern in the NWR is a closed space that allows a long dwelling time (>10 min) of the contrast agent. CONCLUSIONS: An experimental NWR model intended for the reproduction of percutaneous procedures on the TG has been meticulously described. This provides a tool that enables further standardized animal research in the field of surgical treatment of TN.

Defective angiogenesis delays thrombus resolution: a potential pathogenetic mechanism underlying chronic thromboembolic pulmonary hypertension.

OBJECTIVE: Restoration of patency is a natural target of vascular remodeling after venous thrombosis that involves vascular endothelial cells and smooth muscle cells, as well as leukocytes. Acute pulmonary emboli usually resolve <6 months. However, in some instances, thrombi transform into fibrous vascular obstructions, resulting in occlusion of the deep veins, or in chronic thromboembolic pulmonary hypertension (CTEPH). We proposed that dysregulated thrombus angiogenesis may contribute to thrombus persistence. APPROACH AND RESULTS: Mice with an endothelial cell-specific conditional deletion of vascular endothelial growth factor receptor 2/kinase insert domain protein receptor were used in a model of stagnant flow venous thrombosis closely resembling human deep vein thrombosis. Biochemical and functional analyses were performed on pulmonary endarterectomy specimens from patients with CTEPH, a human model of nonresolving venous thromboembolism. Endothelial cell-specific deletion of kinase insert domain protein receptor and subsequent ablation of thrombus vascularization delayed thrombus resolution. In accordance with these findings, organized human CTEPH thrombi were largely devoid of vascular structures. Several vessel-specific genes, such as kinase insert domain protein receptor, vascular endothelial cadherin, and podoplanin, were expressed at lower levels in white CTEPH thrombi than in organizing deep vein thrombi and organizing thrombi from aortic aneurysms. In addition, red CTEPH thrombi attenuated the angiogenic response induced by vascular endothelial growth factor. CONCLUSIONS: In the present work, we propose a mechanism of thrombus nonresolution demonstrating that endothelial cell-specific deletion of kinase insert domain protein receptor abates thrombus vessel formation, misguiding thrombus resolution. Medical conditions associated with the development of CTEPH may be compromising early thrombus angiogenesis.

Mass spectrometric imaging of in vivo protein and lipid adsorption on biodegradable vascular replacement systems.

Cardiovascular diseases present amongst the highest mortality risks in Western civilization and are frequently caused by arteriosclerotic vessel failure. Coronary artery and peripheral vessel reconstruction necessitates the use of small diameter systems that are mechanically stress-resistant and biocompatible. Expanded polytetrafluorethylene (ePTFE) is amongst the materials used most frequently for non-degradable and bio-degradable vessel reconstruction procedures, with thermoplastic polyurethanes (TPU) representing a promising substitute. The present study describes and compares the biological adsorption and diffusion occurring with both materials following implantation in rat models. Gel electrophoresis and thin-layer chromatography, combined with mass spectrometry and mass spectrometry imaging, were utilized to identify the adsorbed lipids and proteins. The results were compared with the analytes present in native aorta tissue. It was revealed that both polymers were severely affected by biological adsorption after 10 min in vivo. Proteins associated with cell growth and migration were identified, especially on the luminal graft surface, while lipids were found to be located on both the luminal and abluminal surfaces. Lipid adsorption and cholesterol diffusion were found to be correlated with the polymer modifications identified on degradable thermoplastic urethane graft samples, with the latter revealing extensive cholesterol adsorption. The present study demonstrates an interaction between biological matter and both graft materials, and provides insights into polymer changes, in particular, those observed with thermoplastic urethanes already after 10 min in vivo exposure. ePTFE demonstrated minor polymer modifications, whereas several different polymer signals were observed for TPU, all were co-localized with biological signals.

Evaluation of cerebral aneurysm wall thickness in experimental aneurysms: comparison of 3T-MR imaging with direct microscopic measurements.

BACKGROUND: Thin aneurysm wall thickness (AWT) is thought to portend an elevated risk of intracranial aneurysm rupture. Magnetic resonance imaging (MRI) is biased by AWT overestimations. Previously, this suspected bias has been qualitatively described but never quantified. We aimed to quantify the overestimation of AWT by MRI when compared to the gold standard of AWT as measured by light microscopy of fresh aneurysm specimens (without any embedding procedure). This analysis should help to define the clinical potential of MRI estimates of AWT. METHODS: 3-Tesla (3T) MRI (contrast-enhanced T1 Flash sequences; resolution: 0.4 x 0.4 x 1.5 mm(3)) was performed in 13 experimental aneurysms. After MR acquisition, the aneurysms were retrieved, longitudinally sectioned and calibrated micrographs were obtained immediately. AWT at the dome, AWT at the neck and parent vessel wall thickness (PVT) were measured on precisely correlated MR-images and histologic micrographs by blinded independent investigators. Parameters were statistically compared (Wilcoxon test, Spearman's correlation). RESULTS: AWT was assessed and reliably measured using MRI. Interobserver variability was not significant for either method. MR overestimation was only significant below the image resolution threshold: AWT at the dome (0.24 ± 0.06 mm vs. MR 0.30 ± 0.08 mm; p = 0.0078; R = 0.6125), AWT at the neck (0.25 ± 0.07 mm vs. MR 0.29 ± 0.07 mm; p = 0.0469; R = 0.7451), PVT (0.46 ± 0.06 mm vs. MR 0.48 ± 0.06 mm; p = 0.5; R = 0.8568). CONCLUSION: In this experimental setting, MR overestimations were minimal (mean 0.02 mm) above the image resolution threshold. When AWT is classified in ranges defined by the MR resolution threshold, clinical usage may be beneficial. Further quantitative and comparative experimental and human studies are warranted to confirm these findings.

Prethrombin-1 as a Drug Substance Promoting Hemostasis with Reduced Risk of Thrombosis.

INTRODUCTION: Prethrombin-1 is a Gla-domain lacking enzymatically inactive split product that results from the cleavage of fragment 1 from prothrombin by thrombin in a feedback reaction. METHODS: A prethrombin-1 preparation derived from human plasma was tested for its hemostatic and thrombogenic properties. Animal models of nail clipping (for rabbits) and tail clipping (for mice) were developed to measure blood loss in FVIII-inhibitor or rivaroxaban anticoagulated rabbits and mice, respectively. A modified Wessler test was used in rabbits to assess the thrombogenic potential by Wessler score and clot weight. Studies were performed in groups of three to six for prethrombin-1 dose escalation and comparison with prothrombin, Beriplex®, FEIBA®, and saline as a control. Data were analyzed using t-statistics or the Mann Whitney U test as applicable. RESULTS: Prethrombin-1 has excellent hemostatic properties in anticoagulated mouse and rabbit bleeding models. Wessler tests suggest that in contrast to activated and nonactivated prothrombin complexes, prethrombin-1 has negligible thrombogenic potential. CONCLUSION: The thrombin zymogen prethrombin-1 promotes hemostasis with reduced risk of thrombosis. Prethrombin-1 may have potential to become a life-saving treatment for patients who bleed or are at risk of bleeding.

Long-term in vivo degradation and biocompatibility of degradable pHEMA hydrogels containing graphene oxide.

Developing biocompatible, non-fouling and biodegradable hydrogels for blood-contacting devices remains a demanding challenge. Such materials should promote natural healing, prevent clotting, and undergo controlled degradation. This study evaluates the biocompatibility and biodegradation of degradable poly(2-hydroxyethyl methacrylate) (d-pHEMA) hydrogels with or without reinforcement with oxidized few-layer graphene (d-pHEMA/M5ox) in a long term implantation in rats, assessing non-desired side-effects (irritation, chronic toxicity, immune response). Subcutaneous implantation over 6 months revealed degradation of both hydrogels, despite slower for d-pHEMA/M5ox, with degradation products found in intracellular vesicles. No inflammation nor infection at implantation areas were observed, and no histopathological findings were detected in parenchymal organs. Immunohistochemistry confirmed d-pHEMA and d-pHEMA/M5ox highly anti-adhesiveness. Gene expression of macrophages markers revealed presence of both M1 and M2 macrophages at all timepoints. M1/M2 profile after 6 months reveals an anti-inflammatory environment, suggesting no chronic inflammation, as also demonstrated by cytokines (IL-α, TNF-α and IL-10) analysis. Overall, modification of pHEMA towards a degradable material was successfully achieved without evoking a loss of its inherent properties, specially its anti-adhesiveness and biocompatibility. Therefore, these hydrogels hold potential as blank-slate for further modifications that promote cellular adhesion/proliferation for tissue engineering applications, namely for designing blood contacting devices with different load bearing requirements. STATEMENT OF SIGNIFICANCE: Biocompatibility, tunable biodegradation kinetics, and suitable immune response with lack of chronic toxicity and irritation, are key features in degradable blood contact devices that demand long-term exposure. We herein evaluate the 6-month in vivo performance of a degradable and hemocompatible anti-adhesive hydrogel based in pHEMA, and its mechanically reinforced formulation with few-layer graphene oxide. This subcutaneous implantation in a rat model, shows gradual degradation with progressive changes in material morphology, and no evidence of local inflammation in surrounding tissue, neither signs of inflammation or adverse reactions in systemic organs, suggesting biocompatibility of degradation products. Such hydrogels exhibit great potential as a blank slate for tissue engineering applications, including for blood contact, where cues for specific cells can be incorporated.

Experimental Broad-Based Curved Sidewall Aneurysms in Rabbits Mimicking Human Carotid Siphon Aneurysms: Proof of Feasibility and Comparability Using Computational Fluid Dynamics.

BACKGROUND/OBJECTIVE: Broad-based sidewall aneurysms of the carotid artery are primarily treated endovascularly. However, recurrence or rupture after treatment still poses a significant risk. Hence, reliable animal models mimicking this aneurysm type are essential for to evaluate the performance of new advanced endovascular devices. METHODS: Experimental aneurysms were created in 12 New Zealand white rabbits (2.5-3.5 kg). The human carotid siphon was mimicked with an end-to-end anastomosis of both common carotid arteries. A venous pouch was sutured on the convexity to mimic a broad-based side wall aneurysm. Patency and configuration were investigated 4 weeks postoperatively by 3-T magnetic resonance angiography. To compare flow conditions of broad-based sidewall aneurysms in rabbits and humans, exemplary computational fluid dynamics simulations were performed using species-specific blood viscosity values. RESULTS: We were able to achieve 0% peri- or postoperative mortality. Patency was confirmed by 3-T magnetic resonance angiography in 11 of 12 aneurysms (91.7%). Aneurysm lengths ranged from 6.4 to 9.8 mm and aneurysm necks from 7.3 to 9.8 mm. Computational fluid dynamics showed simple flow profiles with one vortex in rabbit as well as in human aneurysms. Wall shear stress rates were comparable using species-specific blood viscosity values (rabbit mean 1.65 Pa vs. human mean 1.7 Pa). CONCLUSIONS: The broad-based curved sidewall aneurysm model mimicking the carotid siphon showed high aneurysm patency rates with low morbidity. High comparability with human flow patterns and human intranaeurysmal biomechanical forces was shown using simulations.

Comparison of Decellularized Human Dermal Scaffolds versus Bovine Collagen/Elastin Matrices for Engineering of Soft-Tissue Flaps.

BACKGROUND: Free flap-based soft-tissue reconstruction comes at the price of donor-site morbidity. The arteriovenous loop (AVL) technique can overcome this issue by allowing for the de novo generation of axially vascularized soft-tissue flaps from vein grafts embedded into different matrices. Application of the AVL technique has been limited by insufficient long-term volume retention and poor tissue stability. The authors investigated the suitability of a novel human dermal scaffold to improve volume retention and tissue stability. METHODS: AVLs were created in 28 immunocompetent rats and embedded in either decellularized human dermal scaffolds (experimental group, n = 14) (Epiflex) or bovine collagen/elastin matrices (control group, n = 14) (MatriDerm) in subcutaneous polytetrafluoroethylene chambers. The weight and volume of engineered tissues, the extent of angiogenesis, and the proportion of proliferating cells were compared between groups on postoperative days (PODs) 21 and 28 by means of immunohistochemistry and micro-computed tomography. RESULTS: On POD 28, both groups displayed homogeneous microvascular networks on histopathology and micro-computed tomography. Mean microvessel counts and surface areas and the percentage of proliferating cells did not differ between the groups. However, the experimental human scaffold group displayed significantly smaller volume loss and significantly less tissue degradation compared with bovine matrix controls (volume retention, 102% ± 5% versus 27% ± 7% on POD 21, and 79% ± 12% versus 12% ± 7% on POD 28, respectively; P < 0.0001). CONCLUSION: Compared with bovine matrices, decellularized human scaffolds allow for superior volume retention and tissue stability of de novo engineered soft-tissue AVL flaps in rats. CLINICAL RELEVANCE STATEMENT: AVLs allow for the de novo generation of vascularized soft-tissue flaps. However, insufficient long-term volume retention is still an issue. The authors' study shows that decellularized human matrices guarantee superior volume stability of de novo grown soft-tissue flaps in rats.

Exhaled nitric oxide measurement to monitor pulmonary hypertension in a pneumonectomy-monocrotaline rat model.

The use of fractional exhaled nitric oxide (FeNO) has been suggested as a quantitative marker for pulmonary arterial hypertension (PAH) in humans. To further characterize FeNO in PAH we investigated this marker in a rodent model. Since there is no standardized technique for FeNO measurement in animals, we intended to reduce measuring errors and confounders of an existing published method by mathematical modification and tested its applicability in an NO-regulating therapy concept of PAH. Thirty-three male Sprague-Dawley rats underwent unilateral pneumonectomy and monocrotaline (MCT) injection and were observed for 49 days. A telemetric catheter was introduced into the left pulmonary artery to continuously record mean pulmonary arterial pressure (mPAP), and FeNO was assessed. After 35 days, animals were randomized to receive either oral l-arginine (300 mg/kg) in combination with tetrahydrobiopterin (20 mg/kg) therapy (n = 12) or vehicle (n = 11) daily over a period of 14 days. mPAP at baseline was 17.19 ± 9.62 mmHg, which increased to 53.1 ± 10.63 mmHg 28 days after monocrotaline exposure (P < 0.001). Using the modified technique, we found an inverse correlation between exhaled NO and pulmonary pressures before (r = -0.366, P = 0.043) and after MCT (r = -0.363, P = 0.038) as well as after therapy administration (r = -0.657, P = 0.02). Our modified technique proved robust in a rodent model, since valid and reproducible data were gained and showed an inverse correlation between exhaled NO and mPAP, whereas the existing method did not.

Poly(2-hydroxyethyl methacrylate) hydrogels containing graphene-based materials for blood-contacting applications: From soft inert to strong degradable material.

Degradable biomaterials for blood-contacting devices (BCDs) are associated with weak mechanical properties, high molecular weight of the degradation products and poor hemocompatibility. Herein, the inert and biocompatible FDA approved poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogel was turned into a degradable material by incorporation of different amounts of a hydrolytically labile crosslinking agent, pentaerythritol tetrakis(3-mercaptopropionate). In situ addition of 1wt.% of oxidized graphene-based materials (GBMs) with different lateral sizes/thicknesses (single-layer graphene oxide and oxidized forms of few-layer graphene materials) was performed to enhance the mechanical properties of hydrogels. An ultimate tensile strength increasing up to 0.2 MPa (293% higher than degradable pHEMA) was obtained using oxidized few-layer graphene with 5 µm lateral size. Moreover, the incorporation of GBMs has demonstrated to simultaneously tune the degradation time, which ranged from 2 to 4 months. Notably, these features were achieved keeping not only the intrinsic properties of inert pHEMA regarding water uptake, wettability and cytocompatibility (short and long term), but also the non-fouling behavior towards human cells, platelets and bacteria. This new pHEMA hydrogel with degradation and biomechanical performance tuned by GBMs, can therefore be envisioned for different applications in tissue engineering, particularly for BCDs where non-fouling character is essential. STATEMENT OF SIGNIFICANCE: Suitable mechanical properties, low molecular weight of the degradation products and hemocompatibility are key features in degradable blood contacting devices (BCDs), and pave the way for significant improvement in the field. In here, a hydrogel with outstanding anti-adhesiveness (pHEMA) provides hemocompatibility, the presence of a degradable crosslinker provides degradability, and incorporation of graphene oxide reestablishes its strength, allowing tuning of both degradation and mechanical properties. Notably, these hydrogels simultaneously provide suitable water uptake, wettability, cytocompatibility (short and long term), no acute inflammatory response, and non-fouling behavior towards endothelial cells, platelets and bacteria. Such results highlight the potential of these hydrogels to be envisioned for applications in tissue engineered BCDs, namely as small diameter vascular grafts.

Acellular Human Placenta Small-Diameter Vessels as a Favorable Source of Super-Microsurgical Vascular Replacements: A Proof of Concept.

In this study, we aimed to evaluate the human placenta as a source of blood vessels that can be harvested for vascular graft fabrication in the submillimeter range. Our approach included graft modification to prevent thrombotic events. Submillimeter arterial grafts harvested from the human placenta were decellularized and chemically crosslinked to heparin. Graft performance was evaluated using a microsurgical arteriovenous loop (AVL) model in Lewis rats. Specimens were evaluated through hematoxylin-eosin and CD31 staining of histological sections to analyze host cell immigration and vascular remodeling. Graft patency was determined 3 weeks after implantation using a vascular patency test, histology, and micro-computed tomography. A total of 14 human placenta submillimeter vessel grafts were successfully decellularized and implanted into AVLs in rats. An appropriate inner diameter to graft length ratio of 0.81 ± 0.16 mm to 7.72 ± 3.20 mm was achieved in all animals. Grafts were left in situ for a mean of 24 ± 4 days. Decellularized human placental grafts had an overall patency rate of 71% and elicited no apparent immunological responses. Histological staining revealed host cell immigration into the graft and re-endothelialization of the vessel luminal surface. This study demonstrates that decellularized vascular grafts from the human placenta have the potential to serve as super-microsurgical vascular replacements.

Biodegradable, Self-Reinforcing Vascular Grafts for In Situ Tissue Engineering Approaches.

Clinically available small-diameter synthetic vascular grafts (SDVGs) have unsatisfactory patency rates due to impaired graft healing. Therefore, autologous implants are still the gold standard for small vessel replacement. Bioresorbable SDVGs may be an alternative, but many polymers have inadequate biomechanical properties that lead to graft failure. To overcome these limitations, a new biodegradable SDVG is developed to ensure safe use until adequate new tissue is formed. SDVGs are electrospun using a polymer blend composed of thermoplastic polyurethane (TPU) and a new self-reinforcing TP(U-urea) (TPUU). Biocompatibility is tested in vitro by cell seeding and hemocompatibility tests. In vivo performance is evaluated in rats over a period for up to six months. Autologous rat aortic implants serve as a control group. Scanning electron microscopy, micro-computed tomography (µCT), histology, and gene expression analyses are applied. TPU/TPUU grafts show significant improvement of biomechanical properties after water incubation and exhibit excellent cyto- and hemocompatibility. All grafts remain patent, and biomechanical properties are sufficient despite wall thinning. No inflammation, aneurysms, intimal hyperplasia, or thrombus formation are observed. Evaluation of graft healing shows similar gene expression profiles of TPU/TPUU and autologous conduits. These new biodegradable, self-reinforcing SDVGs may be promising candidates for clinical use in the future.

Silk fibroin, gelatin, and human placenta extracellular matrix-based composite hydrogels for 3D bioprinting and soft tissue engineering.

BACKGROUND: There is a great clinical need and it remains a challenge to develop artificial soft tissue constructs that can mimic the biomechanical properties and bioactivity of natural tissue. This is partly due to the lack of suitable biomaterials. Hydrogels made from human placenta offer high bioactivity and represent a potential solution to create animal-free 3D bioprinting systems that are both sustainable and acceptable, as placenta is widely considered medical waste. A combination with silk and gelatin polymers can bridge the biomechanical limitations of human placenta chorion extracellular matrix hydrogels (hpcECM) while maintaining their excellent bioactivity. METHOD: In this study, silk fibroin (SF) and tyramine-substituted gelatin (G-TA) were enzymatically crosslinked with human placental extracellular matrix (hpcECM) to produce silk-gelatin-ECM composite hydrogels (SGE) with tunable mechanical properties, preserved elasticity, and bioactive functions. The SGE composite hydrogels were characterized in terms of gelation kinetics, protein folding, and bioactivity. The cyto- and biocompatibility of the SGE composite was determined by in vitro cell culture and subcutaneous implantation in a rat model, respectively. The most cell-supportive SGE formulation was then used for 3-dimensional (3D) bioprinting that induced chemical crosslinking during extrusion. CONCLUSION: Addition of G-TA improved the mechanical properties of the SGE composite hydrogels and inhibited crystallization and subsequent stiffening of SF for up to one month. SGE hydrogels exhibit improved and tunable biomechanical properties and high bioactivity for encapsulated cells. In addition, its use as a bioink for 3D bioprinting with free reversible embedding of suspended hydrogels (FRESH) has been validated, opening the possibility to fabricate highly complex scaffolds for artificial soft tissue constructs with natural biomechanics in future.

A combined transcriptome and bioinformatics approach to unilateral ureteral obstructive uropathy in the fetal sheep model.

PURPOSE: Fetal obstructive uropathy is a leading cause of loss of renal function. Characterizing the molecular fingerprint of cellular responses to obstruction in a fetal model of complete unilateral ureteral obstruction may help elucidate the activated mechanisms and suggest new therapeutic interventions. MATERIAL AND METHODS: Unilateral ureteral obstruction was created in 3 sheep fetuses at day 60 of gestation. For transcriptome analysis total RNA was extracted from vital renal biopsies 2 weeks after intervention from obstructed kidneys and from control kidneys of untreated twins. cDNA preparation, hybridization to the GeneChip® Bovine Genome Array and array scanning were done according to manufacturer protocols. Bioinformatics analysis was used to derive functional biological processes linked to obstructive uropathy. Quantitative reverse-transcriptase-polymerase chain reaction and immunohistochemistry were used to validate microarray results. RESULTS: Seven biological processes were identified as significantly affected by differentially regulated features that characterize unilateral ureteral obstruction, namely protein metabolism and modification, other metabolism, neuronal activity, ligand mediated signaling, amino acid metabolism, coenzyme/prosthetic group metabolism and rRNA metabolism. Literature mining identified 17 candidate genes previously reported as key in the context of unilateral ureteral obstruction, related pathological mechanisms or other kidney diseases. CONCLUSIONS: Combined transcriptome and bioinformatics analysis allowed the identification of enriched processes in the fetal sheep model of unilateral ureteral obstruction that are likely associated with renal damage but to our knowledge have not been previously identified. Future clarification of these molecular fingerprints may eventually provide therapeutic targets and early predictive markers involved in the pathogenesis of fetal uropathy.

Electrospun small-diameter polyurethane vascular grafts: ingrowth and differentiation of vascular-specific host cells.

No small-diameter synthetic graft has yet shown comparable performance to autologous vessels. Synthetic conduits fail due to their inherent surface thrombogenicity and the development of intimal hyperplasia. In addressing these shortcomings, electrospinning offers an interesting alternative to other nanostructured, cardiovascular substitutes because of the close match of electrospun materials to the biomechanical and structural properties of native vessels. In this study, we investigated the in vivo behavior of electrospun, small-diameter conduits in a rat model. Vascular grafts composed of polyurethane were fabricated by electrospinning. Prostheses were implanted into the abdominal aorta in 40 rats for either 7 days, 4 weeks, 3 months, or 6 months. Retrieved specimens were evaluated by histology, immunohistochemical staining, confocal laser scanning microscopy, and scanning electron microscopy. At all time points, we found no evidence of foreign body reaction or graft degradation. The overall patency rate of the intravascular implants was 95%. Within 7 days, grafts revealed ingrowth of host cells. CD34+ cells increased significantly from 7 days up to 6 months of implantation (P < 0.05). Myofibroblasts and myocytes showed increasing cell numbers up to 3 months (P < 0.05). Ki67 staining indicated unaltered cell proliferation during the whole follow-up period. Besides biomechanical benefits, electrospun polyurethane grafts exhibit excellent biocompatibility in vivo. Cell immigration and differentiation seems to be promoted by the nanostructured artificial matrix.