SU-8-meta-phenylenediamine-conjugated thin film for temperature sensing.

Polymers have distinctive optical properties and facile fabrication methods that have been well-established. Therefore, they have immense potential for nanophotonic devices. Here, we demonstrate the temperature-sensing potential of SU8-meta-phenylenediamine (SU8-mPD), produced by epoxy amination of the SU-8 polymer. Its properties were examined through a series of molecular structural techniques and optical methods. Thin layers have demonstrated optical emission and absorption in the visible range around 420 and 520 nm, respectively, alongside a strong thermal responsivity, characterized by the 18 ppm °C-1 expansion coefficient. A photonic chip, comprising a thin 5-10 µm SU8-mPD layer, encased between parallel silver and/or gold thin film mirrors, has been fabricated. When pumped by an external light source, this assembly generates a pronounced fluorescent signal that is superimposed with the Fabry-Pérot (FP) resonant response. The chip undergoes mechanical deformation in response to temperature changes, thereby shifting the FP resonance and encoding temperature information into the fluorescence output spectrum. The time response of the device was estimated to be below 1 s for heating and a few seconds for cooling, opening a new avenue for optical sensing using SU8-based polymers. Thermoresponsive resonant structures, encompassing strong tunable fluorescent properties, can further enrich the functionalities of nanophotonic polymer-based platforms. This article is part of the theme issue 'Celebrating the 15th anniversary of the Royal Society Newton International Fellowship'.

Silica micro-rod resonator-based Kerr frequency comb for high-speed short-reach optical interconnects.

Conventional data center interconnects rely on power-hungry arrays of discrete wavelength laser sources. However, growing bandwidth demand severely challenges ensuring the power and spectral efficiency toward which data center interconnects tend to strive. Kerr frequency combs based on silica microresonators can replace multiple laser arrays, easing the pressure on data center interconnect infrastructure. Therefore, we experimentally demonstrate a bit rate of up to 100 Gbps/λ employing 4-level pulse amplitude modulated signal transmission over a 2 km long short-reach optical interconnect that can be considered a record using any Kerr frequency comb light source, specifically based on a silica micro-rod. In addition, data transmission using the non-return to zero on-off keying modulation format is demonstrated to achieve 60 Gbps/λ. The silica micro-rod resonator-based Kerr frequency comb light source generates an optical frequency comb in the optical C-band with 90 GHz spacing between optical carriers. Data transmission is supported by frequency domain pre-equalization techniques to compensate amplitude-frequency distortions and limited bandwidths of electrical system components. Additionally, achievable results are enhanced with offline digital signal processing, implementing post-equalization using feed-forward and feedback taps.

High bitrate data transmission in the 8-14 µm atmospheric window using an external Stark-effect modulator with digital equalization.

High bitrate mid-infrared links using simple (NRZ) and multi-level (PAM-4) data coding schemes have been realized in the 8 µm to 14 µm atmospheric transparency window. The free space optics system is composed of unipolar quantum optoelectronic devices, namely a continuous wave quantum cascade laser, an external Stark-effect modulator and a quantum cascade detector, all operating at room-temperature. Pre- and post-processing are implemented to get enhanced bitrates, especially for PAM-4 where inter-symbol interference and noise are particularly detrimental to symbol demodulation. By exploiting these equalization procedures, our system, with a full frequency cutoff of 2 GHz, has reached transmission bitrates of 12 Gbit/s NRZ and 11 Gbit/s PAM-4 fulfilling the 6.25 % overhead hard-decision forward error correction threshold, limited only by the low signal-to-noise ratio of our detector.

Optical amplification-free deep reservoir computing-assisted high-baudrate short-reach communication.

An optical amplification-free deep reservoir computing (RC)-assisted high-baudrate intensity modulation direct detection (IM/DD) system is experimentally demonstrated using a 100G externally modulated laser operated in C-band. We transmit 112 Gbaud 4-level pulse amplitude modulation (PAM4) and 100 Gbaud 6-level PAM (PAM6) signals over a 200-m single-mode fiber (SMF) link without any optical amplification. The decision feedback equalizer (DFE), shallow RC, and deep RC are adopted in the IM/DD system to mitigate impairment and improve transmission performance. Both PAM transmissions over a 200-m SMF with bit error rate (BER) performance below 6.25% overhead hard-decision forward error correction (HD-FEC) threshold are achieved. In addition, the BER of the PAM4 signal is below the KP4-FEC limit after 200-m SMF transmission enabled by the RC schemes. Thanks to the use of a multiple-layer structure, the number of weights in deep RC has been reduced by approximately 50% compared with the shallow RC, whereas the performance is comparable. We believe that the optical amplification-free deep RC-assisted high-baudrate link has a promising application in intra-data center communications.

Optical pulling and pushing forces via Bloch surface waves.

For flexible tailoring of optical forces, as well as for extraordinary optomechanical effects, additional degrees of freedom should be introduced into a system. Here, we demonstrate that photonic crystals are a versatile platform for optical manipulation due to both Bloch surface waves (BSWs) and the complex character of the reflection coefficient paving a way for controlled optomechanical interactions. We demonstrate enhanced pulling and pushing transversal optical forces acting on a single dipolar bead above a one-dimensional photonic crystal due to directional excitation of BSWs. Our results demonstrate angle- or wavelength-assisted switching between BSW-induced optical pulling and pushing forces. Easy to fabricate for any desired spectral range, photonic crystals are shown to be prospective for precise optical sorting of nanoparticles, which are difficult to sort with conventional optomechanical methods. Our approach opens opportunities for novel, to the best of our knowledge, optical manipulation schemes and platforms, and enhanced light-matter interaction in optical trapping setups.

Hybrid fiber-THz fronthaul supporting up to 16384-QAM-OFDM with the delta-sigma modulation.

With the progress of high-capacity radio access networks, ultra-dense small cells are rapidly being deployed in urban areas. As a result, the deployment of a large number of optical fibers in urban areas becomes a severe issue. In this Letter, we propose a hybrid fiber-terahertz (THz) mobile fronthaul system supporting flexible and high-order wireless signal transmission with the delta-sigma modulation. The photonic THz transmission is used as the seamless extension of fiber-based fronthaul in small cells. A 20-Gbit/s digital fiber-THz fronthaul system is experimentally demonstrated to validate the proposed scheme, with 10-km optical fiber transmission and 300-GHz wireless relay. Carrier aggregation of up to 10 40-MHz and 60-MHz 5G-new radio (5G-NR) channels at the radio carrier frequency of 3.9 GHz is reported. The design of quantization noise suppressed delta-sigma modulation enables the system to transmit orthogonal frequency division multiplexing (OFDM) modulation up to  16384 order quadrate amplitude modulation (QAM) mapping with the error vector magnitude (EVM) below 0.5%.

Road Pavement Structural Health Monitoring by Embedded Fiber-Bragg-Grating-Based Optical Sensors.

Fiber Bragg grating (FBG) optical sensors are state-of-the-art technology that can be integrated into the road structure, providing real-time traffic-induced strain readings and ensuring the monitoring of the road's structural health. By implementing specific FBG sensors, it is possible to detect each vehicle's axle count and the induced strain changes in the road structure. In this study, FBG sensors are embedded at the top of the 240-mm-thick cement-treated reclaimed asphalt pavement mixture layer of the road (specifically, 25 mm deep within the road). Optical sensors' signal interrogation units are used to measure the strain and temperature and collect data of the road's passing vehicles, starting from passenger cars that have two axles and up to heavy trucks that have six axles. Passenger cars with 2 axles generate a typical (90% events) strain of 0.8-4.1 µm/m, the 2-axle minibus 5.5-8.5 µm/m, 2-3-axle trucks 11-26 µm/m, but 4-6-axle trucks 14-36 µm/m per each axle. A large number of influencing parameters determine the pavement design leading to the great uncertainty in the prediction of the strain at the boundary between the asphalt surface and cement-treated base layers. Real-time strain and temperature measurements help to understand the actual behavior of the pavement structure under an applied load, thus assisting in validating the proposed pavement design.

FPGA-Implemented Fractal Decoder with Forward Error Correction in Short-Reach Optical Interconnects.

Forward error correction (FEC) codes combined with high-order modulator formats, i.e., coded modulation (CM), are essential in optical communication networks to achieve highly efficient and reliable communication. The task of providing additional error control in the design of CM systems with high-performance requirements remains urgent. As an additional control of CM systems, we propose to use indivisible error detection codes based on a positional number system. In this work, we evaluated the indivisible code using the average probability method (APM) for the binary symmetric channel (BSC), which has the simplicity, versatility and reliability of the estimate, which is close to reality. The APM allows for evaluation and compares indivisible codes according to parameters of correct transmission, and detectable and undetectable errors. Indivisible codes allow for the end-to-end (E2E) control of the transmission and processing of information in digital systems and design devices with a regular structure and high speed. This study researched a fractal decoder device for additional error control, implemented in field-programmable gate array (FPGA) software with FEC for short-reach optical interconnects with multilevel pulse amplitude (PAM-M) modulated with Gray code mapping. Indivisible codes with natural redundancy require far fewer hardware costs to develop and implement encoding and decoding devices with a sufficiently high error detection efficiency. We achieved a reduction in hardware costs for a fractal decoder by using the fractal property of the indivisible code from 10% to 30% for different n while receiving the reciprocal of the golden ratio.

Demonstration of a fiber optical communication system employing a silica microsphere-based OFC source.

The fabrication of microsphere resonators and the generation of optical frequency combs (OFC) have achieved a significant breakthrough in the past decade. Despite these advances, no studies have reported the experimental implementation and demonstration of silica microsphere OFCs for data transmission. In this work, to the best of our knowledge, we experimentally for the first time present a designed silica microsphere whispering-gallery-mode microresonator (WGMR) OFC as a C-band light source where 400 GHz spaced carriers provide data transmission of up to 10 Gbps NRZ-OOK modulated signals over the standard ITU-T G.652 telecom fiber span of 20 km in length. A proof-of-concept experiment is performed with two newly generated carriers (from 7-carrier OFC) having the highest peak power. The experimental realization is also strengthened by the modeling and simulations of the proposed system showing a strong match of the results. The demonstrated setup serves as a platform for the future experimental implementation of silica microsphere WGMR-OFC in more complex WDM transmission system realizations with advanced modulation schemes.

Optothermal Needle-Free Injection of Vaterite Nanocapsules.

The propulsion and acceleration of nanoparticles with light have both fundamental and applied significance across many disciplines. Needle-free injection of biomedical nano cargoes into living tissues is among the examples. Here a new physical mechanism of laser-induced particle acceleration is explored, based on abnormal optothermal expansion of mesoporous vaterite cargoes. Vaterite nanoparticles, a metastable form of calcium carbonate, are placed on a substrate, underneath a target phantom, and accelerated toward it with the aid of a short femtosecond laser pulse. Light absorption followed by picosecond-scale thermal expansion is shown to elevate the particle's center of mass thus causing acceleration. It is shown that a 2 µm size vaterite particle, being illuminated with 0.5 W average power 100 fsec IR laser, is capable to overcome van der Waals attraction and acquire 15m sec-1 velocity. The demonstrated optothermal laser-driven needle-free injection into a phantom layer and Xenopus oocyte in vitro promotes the further development of light-responsive nanocapsules, which can be equipped with additional optical and biomedical functions for delivery, monitoring, and controllable biomedical dosage to name a few.

Thermo-optics of gilded hollow-core fibers.

Hollow core fibers, supporting waveguiding in a void, open a room of opportunities for numerous applications owing to an extended light-matter interaction distance and relatively high optical confinement. Decorating an inner capillary with functional materials allows tailoring the fiber's optical properties further and turns the structure into a functional device. Here, we functionalize an anti-resonant hollow-core fiber with 18 nm-size gold nanoparticles, approaching a uniform 45% surface coverage along 10 s of centimeters along its inner capillary. Owing to a moderately low overlap between the fundamental mode and the gold layer, the fiber maintains its high transmission properties; nevertheless, the entire structure experiences considerable heating, which is observed and quantified with the aid of a thermal camera. The hollow core and the surrounding capillary are subsequently filled with ethanol and thermo-optical heating is demonstrated. We also show that at moderate laser intensities, the liquid inside the fiber begins to boil and, as a result, the optical guiding is destroyed. The gilded hollow core fiber and its high thermal-optical responsivity suggest considering the structure as an efficient optically driven catalytic reactor in applications where either small reaction volumes or remote control over a process are demanded.

Crystallinity as a factor of SERS stability of silver nanoparticles formed by Ar+ irradiation.

The plasmonic sensors based on silver nanoparticles are limited in application due to their relatively fast degradation in the ambient atmosphere. The technology of ion-beam modification for the creation of monocrystalline silver nanoparticles (NPs) with stable plasmonic properties will expand the application of silver nanostructures. In the present study, highly-stable monocrystalline NPs were formed on the basis of a thin silver film by low-energy ion irradiation. Combined with lithography, this technique allows the creation of nanoparticle ensembles in variant forms. The characterization of the nanoparticles formed by ion-beam modification showed long-term outstanding for Ag nanoparticles stability of their plasmonic properties due to their monocrystalline structure. According to optical spectroscopy data, the reliable plasmonic properties in the ambient atmosphere are preserved for up to 39 days. The mapping of crystal violet dye via surface-enhanced Raman spectroscopy (SERS) revealed a strong amplification factor sustaining at least thrice as long as the one of similarly sized polycrystalline silver NPs formed by annealing. The plasmonic properties sustain more than a month of storage in the ambient atmosphere. Thus, ion-beam modification of silver film makes it possible to fabricate NPs with stable plasmonic properties and form clusters of NPs for sensor technology and SERS applications.

Unipolar quantum optoelectronics for high speed direct modulation and transmission in 8-14 µm atmospheric window.

The large mid-infrared (MIR) spectral region, ranging from 2.5 µm to 25 µm, has remained under-exploited in the electromagnetic spectrum, primarily due to the absence of viable transceiver technologies. Notably, the 8-14 µm long-wave infrared (LWIR) atmospheric transmission window is particularly suitable for free-space optical (FSO) communication, owing to its combination of low atmospheric propagation loss and relatively high resilience to turbulence and other atmospheric disturbances. Here, we demonstrate a direct modulation and direct detection LWIR FSO communication system at 9.1 µm wavelength based on unipolar quantum optoelectronic devices with a unprecedented net bitrate exceeding 55 Gbit s-1. A directly modulated distributed feedback quantum cascade laser (DFB-QCL) with high modulation efficiency and improved RF-design was used as a transmitter while two high speed detectors utilizing meta-materials to enhance their responsivity are employed as receivers; a quantum cascade detector (QCD) and a quantum-well infrared photodetector (QWIP). We investigate system tradeoffs and constraints, and indicate pathways forward for this technology beyond 100 Gbit s-1 communication.

Gilded vaterite optothermal transport in a bubble.

Laser beams, capable of controlling the mechanical motion of micron-scale objects, can serve as a tool, enabling investigations of numerous interaction scenarios under full control. Beyond pure electromagnetic interactions, giving rise to conventional gradient forces and radiation pressure, environment-induced thermal effects can play a role and, in certain cases, govern the dynamics. Here we explore a thermocapillary Marangoni effect, which is responsible for creating long-range few hundreds of nano-Newton forces, acting on a bubble around a 'gilded vaterite' nanoparticle. Decorating calcium carbonate spherulite (the vaterite) with gold nanoseeds allows tuning its optical absorption and, as a result, controlling its temperature in a solution. We demonstrate that keeping a balance between electromagnetic and thermal interactions allows creating of a stable micron-scale bubble around the particle and maintaining its size over time. The bubbles are shown to remain stable over minutes even after the light source is switched off. The bubbles were shown to swim toward a laser focus for over 400-µm distances across the sample. Optothermal effects, allowing for efficient transport, stable bubble creation, and particle-fluid interaction control, can grant nano-engineered drug delivery capsules with additional functions toward a theragnostic paradigm shift.

Quantum-Dot-Induced Modification of Surface Functionalization for Active Applications of Whispering Gallery Mode Resonators.

Quantum dots can modify the properties of the whispering gallery mode resonators (WGMRs) used in various potential applications. A deposition of a suitable nanomaterial for the surface functionalization of WGMRs allows for the achievement of high quality (Q) factors. Here, we show that the WGMR surface can be functionalized using quantum dots. We demonstrate that WGMRs covered with thin layers of HgS and PbS quantum dots are suitable for third-harmonic generation due to the high Q factor of the developed microresonators, thus significantly lowering the pumping power required for nonlinear optical interactions.

Superscattering emerging from the physics of bound states in the continuum.

We study the Mie-like scattering from an open subwavelength resonator made of a high-index dielectric material, when its parameters are tuned to the regime of interfering resonances. We uncover a novel mechanism of superscattering, closely linked to strong coupling of the resonant modes and described by the physics of bound states in the continuum (BICs). We demonstrate that the enhanced scattering occurs due to constructive interference described by the Friedrich-Wintgen mechanism of interfering resonances, allowing to push the scattering cross section of a multipole resonance beyond the currently established limit. We develop a general non-Hermitian model to describe interfering resonances of the quasi-normal modes, and study subwavelength dielectric nonspherical resonators exhibiting avoided crossing resonances associated with quasi-BIC states. We confirm our theoretical findings by a scattering experiment conducted in the microwave frequency range. Our results reveal a new strategy to boost scattering from non-Hermitian systems, suggesting important implications for metadevices.

Special scattering regimes for conical all-dielectric nanoparticles.

All-dielectric nanophotonics opens a venue for a variety of novel phenomena and scattering regimes driven by unique optical effects in semiconductor and dielectric nanoresonators. Their peculiar optical signatures enabled by simultaneous electric and magnetic responses in the visible range pave a way for a plenty of new applications in nano-optics, biology, sensing, etc. In this work, we investigate fabrication-friendly truncated cone resonators and achieve several important scattering regimes due to the inherent property of cones-broken symmetry along the main axis without involving complex geometries or structured beams. We show this symmetry breaking to deliver various kinds of Kerker effects (generalized and transverse Kerker effects), non-scattering hybrid anapole regime (simultaneous anapole conditions for all the multipoles in a particle leading to the nearly full scattering suppression) and, vice versa, superscattering regime. Being governed by the same straightforward geometrical paradigm, discussed effects could greatly simplify the manufacturing process of photonic devices with different functionalities. Moreover, the additional degrees of freedom driven by the conicity open new horizons to tailor light-matter interactions at the nanoscale.