RESUMEN
BACKGROUND: Exercise-induced pulmonary haemorrhage (EIPH) in athletic horses is characterized by the presence of blood from the lungs in the tracheobronchial tree after intense exercise. Despite the high prevalence of EIPH in horses, the primary aetiology remains unknown. Variants in the genes encoding CD39 and CD39L1 (ENTPD1 and ENTPD2, respectively) were previously reported as potential genetic causes involved in EIPH pathogenesis. However, the role of these variants in haemostatic functions is unknown. RESULTS: To investigate the association between EIPH and missense variants in the ENTPD1 (rs1152296272, rs68621348, and rs68621347) and ENTPD2 genes (rs782872967), 76 Thoroughbred horses diagnosed with EIPH and 56 without clinical signs of EIPH (control group) by trachea-bronchial endoscopy were genotyped. The rs1152296272 and rs68621347 variants were linked, which explained why the same results were found in all horses. Approximately 96% and 95% of the EIPH and control horses, respectively, carried at least one nonreference allele for these variants. In contrast, 100% of the control horses and 96% of the EIPH horses were homozygous for the reference allele for the rs68621348 variant. In the EIPH group, 1.5% of the horses were homozygotes and 24% were heterozygous for the nonreference allele of the rs782872967 variant. In the control group, the nonreference allele of this variant was observed only in heterozygotes (16%). There were no significant differences between groups for any of the variants. CONCLUSIONS: The variants previously described in the genes encoding the CD39 and CD39L1 enzymes were highly present in the studied population. However, no association was found between the occurrence of EIPH and the presence of these variants in Thoroughbred horses in this study.
Asunto(s)
Hemorragia , Enfermedades de los Caballos , Enfermedades Pulmonares , Condicionamiento Físico Animal , Animales , Caballos , Enfermedades de los Caballos/genética , Hemorragia/veterinaria , Hemorragia/genética , Enfermedades Pulmonares/veterinaria , Enfermedades Pulmonares/genética , Masculino , Apirasa/genética , Femenino , Predisposición Genética a la Enfermedad , Genotipo , Mutación MissenseRESUMEN
OBJECTIVE: This study aimed to evaluate the fecal shedding of C. difficile in calves on farms in Sao Paulo State, Brazil. MATERIALS AND METHODS: Fecal samples (n = 300) were collected from diarrheic (n = 78) and nondiarrheic (n = 222) calves less than 60 days of age from 20 farms. Fecal samples were inoculated into enrichment broth supplemented with taurocholate and cultured under anaerobic conditions. Colonies suspected to be C. difficile were harvested for DNA extraction and then multiplex PCR for the detection of genes encoding toxins A and B and binary toxins. All toxigenic isolates were ribotyped and tested for antimicrobial susceptibility, and five selected strains were subjected to whole-genome sequencing to determine their sequence type. RESULTS AND DISCUSSION: C. difficile was isolated from 29.3 % (88/300) of the samples. All toxigenic isolates (17/88, 19.3 %) were classified as ribotypes RT046 (13/17-79.47 %, A+B+ CDT-) and RT126 (4/17 = 20.53 %, A+B+ CDT+). The sequenced strains from RT046 were classified as ST35 (Clade 1), while those from RT126 were classified as ST11 (Clade 5). No associations between the epidemiological factors in any of the groups and C. difficile isolation were observed. Most of the toxigenic isolates (16/17 = 94.41 %) were classified as multidrug-resistant. Calves can be an important source of toxigenic C. difficile strains, including multidrug-resistant isolates from ribotypes commonly observed in humans.
RESUMEN
BACKGROUND/AIMS: The study aimed to assess the surface characteristics of sports mouthguards under mechanical stresses during cleaning, either by brushing or immersion in disinfectant solutions. MATERIAL AND METHODS: Ethylene-vinyl acetate samples, 4 mm thick, were randomly assigned to cleaning methods: control (C-no cleaning), brushing with water (B.W), brushing with neutral liquid soap (B.S), brushing with toothpaste (B.T), immersion in distilled water for 10 min (I.W), immersion in 2.25% sodium hypochlorite solution for 10 min (I.SH), and immersion in sodium bicarbonate solution for 5 min (I.SB). All cleaning methods were applied for 28 days. Surface roughness average (Ra) and wettability were measured at baseline for the control group (n = 9), and after cleaning for all the other groups. RESULTS: One-way ANOVA with Tukey tests (5% significance) indicated significant differences among groups (p < .05). The I.SB group had higher surface roughness than B.S and B.T (p < .05). B.W showed the lowest wettability, significantly lower than B.T, I.W, and I.SB (p < .05). I.SB exhibited the highest wettability, significantly different from sodium hypochlorite, neutral liquid soap, brushing with water, and control groups (p < .05). The sodium bicarbonate immersion group (I.SB) demonstrated greater statistical variation, displaying higher susceptibility to aging compared to brushing with neutral liquid soap. CONCLUSION: Cleaning mouthguards with a toothbrush, water, and neutral liquid soap emerged as the most promising method, causing minimal surface changes in the material.
Asunto(s)
Protectores Bucales , Propiedades de Superficie , Cepillado Dental , Desinfectantes , Hipoclorito de Sodio/farmacología , Humanos , Bicarbonato de Sodio , Jabones , Pastas de Dientes , Humectabilidad , Factores de Tiempo , PolivinilosRESUMEN
To control biochemical processes, non-covalent interactions involving cations are activated by protons or electrons. In the present study, the bonding situation between: (i) carboxylic acid or (ii) ferrocene-functionalized crown ether derivatives and cations (Li+, Na+ or K+) has been elucidated and, mainly, tuned by the substitution of hydrogen atoms by electron donor (-NH2) or acceptor (-NO2) groups. The deprotonation of the carboxyl groups improves the interaction with the cations through more favorable electrostatic Oâ¯cation interactions. Reducing the ferrocene structures favors cationic recognition supported by a less unfavorable ironâ¯cation binding. The receptors preferably interact with smaller cations because of more attractive electrostatic and orbital (σ or π) Oâ¯cation interactions. The presence of electron donor or acceptor groups in the carboxylic acid-functionalized crown ethers promotes less attractive interactions with the cations, mainly due to the less favorable electrostatic Oâ¯Na+ interactions. The -H â -NH2 substitution in the ferrocene framework favors the cationic recognition. It is based on the strengthening of the electrostatic and σ Oâ¯Na+ and H2Nâ¯Na+ bonds. The (i) absence of repulsive electrostatic ironâ¯cation interactions, or (ii) the presence of oxygen atoms with large electron density, ensures carboxylic acid-functionalized crown ethers have more favorable interactions with cations than ferrocene compounds. Therefore, this work has demonstrated how cation recognition can be improved by structural changes in carboxylic acid- or ferrocene-functionalized crown ethers and has shown that the carboxylic acid molecules appear to be better candidates for cation recognition than ferrocene derivatives.
RESUMEN
OBJECTIVES: Photo- and dual-polymerized resin-based luting agent was evaluated for elastic moduli effects on ultra-thin lithium disilicate (LD) glass-ceramic strengthening, structural reliability, and stress distribution. MATERIALS AND METHODS: One hundred-sixty LD discs (IPS e.max CAD, Ivoclar/Vivadent) were produced in ultra-thin thicknesses (half with 0.3 mm and the other half with 0.5 mm). The ultra-thin ceramic disks were coated with two different cement types (Variolink Veneer - V and Panavia F 2.0 - P). Two positive control groups were tested following hydrofluoric (HF) acid etching (LDt3, LDt5) and two negative control groups were tested for untreated ceramic (LD 3, LD 5). Biaxial flexural strength (BFS), characteristic strength (σ0) and Weibull modulus (m) were the response variables (n = 20) at the ceramic/resin cement interface (z = 0). Finite element analysis (FEA) was used to calculate maximum principal stress. Data were analyzed using two-way ANOVA, and Tukey's test. Scanning electron microscopy (SEM) was used to analyze the failed specimens using fractography and surface morphology. RESULTS: The BFS of LD at either thickness was not affected by cement types, as also demonstrated by FEA. Structural reliability significantly improved in the positive control group (LDt5). CONCLUSION: The cementation of ultra-thin LD with a resin-cement of varying elastic moduli did not influence BFS. LD surface modification by HF acid-etching increased the reliability. CLINICAL RELEVANCE: Ultra-thin anterior veneer designs made from lithium disilicate have been widely proposed and the apparent success of LD ultra-thin veneers was not influenced by the cement choice in the current studies albeit the elastic moduli luting agents used were of similar values.
Asunto(s)
Recubrimiento Dental Adhesivo , Cementos de Resina , Cementos de Resina/química , Resistencia Flexional , Módulo de Elasticidad , Reproducibilidad de los Resultados , Ensayo de Materiales , Propiedades de Superficie , Porcelana Dental/química , Cerámica/química , Cementos Dentales , Ácido Fluorhídrico/químicaRESUMEN
OBJECTIVE: To evaluate the effects of cusp inclination of the prosthetic preparation's occlusal surface and type of restorative material on the fatigue behavior, failure mode, and stress distribution of occlusal veneers. MATERIALS AND METHODS: Glass fiber-reinforced epoxy resin prosthetic preparations for occlusal veneers with three different occlusal surface cusp inclination degrees (0°, 15°, and 30°) were produced and assigned into six testing groups (n = 11) according to the cusp inclination (0°, 15°, or 30°) and type of restorative material (lithium disilicate-LD or resin composite-RC). Despite different substrate preparation cusp inclination degrees, the restorations were designed maintaining 30° inclination between the cusps at the occlusal surface and a thickness of 0.7 mm at the central groove region of the restorations to be machined in a CAD/CAM system. After cementation, the specimens were stored for about 7 days (under water at 37 °C), and subsequently submitted to a load to failure test (n = 2) and an intermittent cyclic fatigue test (n = 9) (initial load: 100 N; step size: 50 N; cycles/step: 10,000; loading frequency: 20 Hz; loading piston: 6-mm-diameter stainless steel) until observing cracks. The data were analyzed by two-way ANOVA, Kaplan-Meier, and Mantel-Cox post hoc tests. Finite element analysis (FEA) and fractographic analyses were performed. RESULTS: The fatigue performance of LD and RC occlusal veneers was evaluated based on different prosthetic preparation cusp inclinations. The 0° inclination showed the best fatigue performance for both materials (LD: 944N, RC: 861N), while the 15° and 30° inclinations had lower values (LD: 800N and 533N, RC: 739N and 717N, respectively). The study also found that for a 0° inclination, LD occlusal veneers performed better than RC ones (LD: 944 N > RC: 861N), while for a 30° inclination, RC occlusal veneers had better fatigue performance than LD ones (LD: 533N < RC: 717N). No significant difference was observed between the materials for a 15° inclination (LD: 800N = RC: 739N). The FEA results showed a higher tensile stress concentration on lithium disilicate than on resin composite occlusal veneers. All lithium disilicate occlusal veneers showed radial crack failures, while resin composite occlusal veneers showed Hertzian cone cracks and radial cracks combined. CONCLUSION: Considering mechanical perspective only, RC occlusal veneers should be indicated when prosthetic preparation cusps inclinations are 30°. When 0° prosthetic preparation cusps inclinations are observed, LD occlusal veneers will behave mechanically better. When a 15° cusp inclination is preserved, both restorative materials behave similarly.
Asunto(s)
Cerámica , Porcelana Dental , Ensayo de Materiales , Análisis del Estrés Dental , Resinas Compuestas , Diseño Asistido por Computadora , Fracaso de la Restauración Dental , Propiedades de SuperficieRESUMEN
This study compared the prevalence of C. innocuum DNA in the feces of healthy horses and horses with acute colitis. C. innocuum was identified in 22% (15/68) of colitis cases and 18% (12/68) of healthy horses (p = 0.416).
Asunto(s)
Clostridium , Colitis , Caballos , Animales , Prevalencia , Colitis/epidemiología , Colitis/veterinaria , HecesRESUMEN
BACKGROUND: Hereditary equine regional dermal asthenia (HERDA) is a genetic disease that alters collagen biosynthesis. Affected horses exhibit fragile, hyperextensible skin, especially over the dorsal region. Although ultraviolet (UV) radiation seems to contribute to the regional distribution of lesions and worsening of clinical signs, the molecular mechanisms involved are largely unknown. OBJECTIVES: To evaluate the effect of solar radiation on matrix metalloproteinase MMP1, MMP8 and MMP13 gene expression in the dorsal and ventral skin of HERDA-affected and HERDA-unaffected horses [wild-type (WT) horses]. ANIMALS: Six HERDA-affected and six unaffected Quarter horses (WT) were paired according to age, sex and coat colour. MATERIALS AND METHODS: Horses were submitted to 30 day sunlight restriction, followed by 15 day sunlight exposure. Dorsal and ventral skin biopsies were obtained at six sampling times over 45 days. The expression of MMP1, MMP8 and MMP13 genes was measured by quantitative PCR. RESULTS: Although solar radiation modulated MMP1, MMP8 and MMP13 expression, the effects were more pronounced on MMP1. Sun exposure for three days significantly upregulated MMP1 in the dorsal region when compared to the ventral skin in both unaffected and HERDA-affected horses. CONCLUSIONS AND CLINICAL RELEVANCE: This study shows that solar irradiation leads to upregulation of skin collagenase genes particularly MMP1 in the dorsal, sun-exposed skin of horses. Furthermore, this was more marked in HERDA-affected horses. The increased activity of collagenases on the disorganised collagen present in HERDA affected horses would explain why UV radiation leads to deterioration of clinical signs in affected individuals.
Asunto(s)
Metaloproteinasa 1 de la Matriz , Metaloproteinasa 8 de la Matriz , Animales , Caballos/genética , Metaloproteinasa 8 de la Matriz/genética , Metaloproteinasa 13 de la Matriz/genética , Metaloproteinasa 1 de la Matriz/genética , Astenia/genética , Astenia/patología , Astenia/veterinaria , Colagenasas/genética , Expresión GénicaRESUMEN
BACKGROUND/AIMS: Professional and amateur athletes might have veneer restorations. The aim of this study was to investigate the protective effect of mouthguards on veneered anterior restorations. METHODS: A nonlinear dynamic analysis was performed to simulate conditions during an impact with or without a custom-made mouthguard. Using a computer-aided design (CAD) software, a slice of a human maxilla was designed containing an upper right central incisor. The model was composed of mucosa, cortical bone, trabecular bone, periodontal ligament, dentin, enamel, and pulp tissue. The enamel was prepared (feather design), restored with an indirect veneer (1.0 mm thickness), and duplicated to simulate both conditions with or without a mouthguard (4 mm thickness). Both models were subdivided into finite elements using the computer-aided engineering (CAE) software. Frictionless contacts were used, and an impact was simulated in which a rigid sphere hit the model at 1 m s-1 . Fixation was defined at the base of the bone. The elastic modulus of the veneer was assessed by using five different restorative materials (resin composite, hybrid ceramic, zirconia-reinforced lithium silicate, lithium disilicate, and zirconia). Von Mises stress, minimal principal stress, and maximum principal stress (in MPa) were obtained and plotted for visual comparison. RESULTS: Von-Mises results showed higher stress concentrations in the veneer's cervical labial region for models without a mouthguard. Observing the quantitative results for each model, the highest compressive (709 MPa) and tensile (58 MPa) stresses occurred in the situation without a mouthguard with a zirconia veneer, while the lowest occurred in resin composite veneer with a mouthguard (8 and 5 MPa). The mouthguard was able to reduce the stresses in the tooth structure and it also reduced the risk of fracture in all conditions. CONCLUSIONS: Mouthguards were beneficial in reducing the effects of dental trauma regardless of the restorative material used to manufacture the indirect veneer, since they act by dampening the generated stresses during the trauma event. Equal impact stresses on a mouthguard will lead to higher stresses in veneered teeth with more rigid restorative materials leading to a less protective effect.
Asunto(s)
Materiales Dentales , Circonio , Humanos , Análisis de Elementos Finitos , Resinas Compuestas , Análisis del Estrés Dental , Estrés Mecánico , Ensayo de MaterialesRESUMEN
STATEMENT OF PROBLEM: Various strategies have been proposed to reduce the cement space of foundation restorations for endodontically treated teeth. However, they may add more operative steps, or the dentist must keep different sizes of drills and posts in stock. A 2-piece universal adjustable post system has been developed to overcome this problem, but whether the system has acceptable fatigue survival performance is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the fatigue survival and stress distribution of endodontically treated teeth without a ferrule and restored with different glass fiber post strategies versus a recently introduced universal 2-piece fiber post system. MATERIAL AND METHODS: Bovine incisor roots were randomly assigned to 3 groups as per the post used (n=13): adapted glass fiber post with post space preparation of the same size, composite resin-custom glass fiber post (CTM), and universal 2-piece glass fiber-reinforced composite resin post (UNI). The posts were adhesively luted, the composite resin core was added, and a composite resin crown was produced with computer-aided design and computer-aided manufacturing (CAD-CAM), and then adhesively luted to each core. A fatigue test was performed with the stepwise stress method (10 000 cycles/step; 20 Hz; load=100 N to 750 N; step=50 N) until fracture, and the failure mode analyzed. The stress distribution was evaluated by finite element analysis with the maximum principal stress criteria by following the parameters of the in vitro test. The solids were considered homogeneous, linear, and isotropic, except for the glass fiber post (orthotropic), and a load of 450 N at 30 degrees was applied. The fatigue failure load and the number of cycles for failure were analyzed with Kaplan-Meier and Mantel-Cox (log rank test) (α=.05). The finite element analysis results were analyzed with colorimetric graphs. RESULTS: The highest fatigue failure load and the number of cycles for failure were found in the UNI system, whereas the lowest results were found in the CTM group. All groups exhibited repairable failures. The finite element analysis showed the lowest stress in root dentin in the UNI system. The CTM system had the largest stress regions at the dentin and dentin-core interface. CONCLUSIONS: The use of a 2-piece universal glass fiber post system resulted in more fatigue behavior compared with composite resin-custom glass fiber posts.
Asunto(s)
Técnica de Perno Muñón , Fracturas de los Dientes , Diente no Vital , Animales , Bovinos , Cerámica , Resinas Compuestas , Análisis del Estrés Dental , Vidrio , Ensayo de Materiales , Cementos de Resina , Propiedades de Superficie , Diente no Vital/terapiaRESUMEN
The objective of this study was to investigate the effect of mismatch between the elastic properties of substrate and restorative material on the fatigue resistance and stress distribution of multilayer structures. The tested hypotheses were that (1) both an indirect composite resin (IR) and a polymer-infiltrated ceramic network (PICN) would show a higher survival rate after cyclic loading when cemented to a substrate with a high elastic modulus (E); and (2) PICN structures would have higher survival rates than IR structures regardless of the supporting substrate. Blocks of PICN and IR were cut to obtain 1.0-mm-thick sections, which were cemented to substrates with different E values: c, core resin cement (low E); r, composite resin (intermediate E); and m, metal (nickel-chromium alloy; high E). The resulting 6 groups of specimens (n = 20 per group) were subjected to a cyclic fatigue test (106 cycles). Stress distribution was verified using finite element analysis, and the risk of failure was estimated. Fatigue data were analyzed using Kaplan-Meier and Holm-Sidák tests. The χ2 test was used to evaluate the type of crack. The groups IRc, IRr, and PICNm had the highest survival rates after cyclic loading and were statistically similar to each other. Their survival rates were significantly greater than those of the IRm, PICNr, and PICNc groups (P < 0.001), which were all significantly different from each other (P < 0.001). There was a significant relationship between the experimental group and type of crack (P < 0.001). Specimens cemented to core resin cement and composite resin substrates showed predominantly radial cracks, while those cemented to nickel chromium alloy had predominantly cone cracks. The risk of failure values revealed that PICN was more sensitive to the type of substrate than IR. PICN has greater fatigue-resistant behavior when cemented to a substrate with a high E value, while IR has superior performance when substrates with lower and intermediate E values are used.
Asunto(s)
Porcelana Dental , Cementos de Resina , Humanos , Porcelana Dental/química , Cementos de Resina/química , Fracaso de la Restauración Dental , Diseño Asistido por Computadora , Análisis del Estrés Dental , Ensayo de Materiales , Cerámica/uso terapéutico , Cerámica/química , Resinas Compuestas/uso terapéutico , Resinas Compuestas/química , Polímeros , Propiedades de SuperficieRESUMEN
Hibiscus sabdariffa L. is a worldwide component for tea and beverages, being a natural source of anthocyanins, which are associated with cardiovascular activities. To investigate this relationship, we explored different methods of aqueous extraction on the anthocyanin content and antioxidant activity of H. sabdariffa L. calyx extract (HSCE). Pharmacological effects via platelet aggregation, calcium mobilization, cyclic nucleotide levels, vasodilator-stimulated phosphoprotein Ser157 and Ser239, and on the vasomotor response of aortic rings isolated from mice are studied herewith. We found that the application of ultrasonic turbolization, 20 min, combined with acidified water was significantly more effective in the extraction process, providing extracts with the highest levels of anthocyanins (8.73 and 9.63 mg/100 g) and higher antioxidant activity (6.66 and 6.78 µM trolox/g of sample). HSCE significantly inhibited (100-1000 µg/mL) arachidonic acid-induced platelet aggregation, reduced calcium mobilization, and increased cAMP and cGMP levels with VASPSer157 and VASPSer239 phosphorylation. Vasorelaxation reduction was confirmed by the aortic rings and endothelium assays treated with nitric oxide synthase inhibitors, soluble guanylyl cyclase (sGC) oxidizing agent, or Ca2+-activated K+ channel inhibitor. The increasing of cGMP levels could be understood considering the sGC stimulation by HSCE compounds in the specific stimulus domain, which allows an understanding of the observed antiplatelet and vasorelaxant properties of H. sabdariffa L. calyx extract.
Asunto(s)
Hibiscus , Vasodilatadores , Animales , Ratones , Vasodilatadores/farmacología , Antocianinas/farmacología , Antioxidantes/farmacología , Calcio , Extractos Vegetales/farmacología , GMP Cíclico/metabolismoRESUMEN
OBJECTIVES: The aim of this study was to compare the effect of three different access cavities on the tissue removal, deflection, fracture resistance, and stress distribution of extracted maxillary central incisors. MATERIALS AND METHODS: Forty human maxillary central incisors were randomly assigned in four experimental group (n = 10) including conservative access cavity "CAC," traditional access cavity "TAC," invasive access cavity "IAC," and without access cavity (control group). Cone-beam computed tomography "CBCT" scans were used to evaluate the tissue removal during the different access cavities. All specimens were restored with composite resin (Admira Fusion, Voco, Cuxhaven, Germany) and embedded in acrylic resin blocks after simulating the periodontal ligament using red wax, then the specimens were submitted to the deflection test applying a load of 250 N and to the load-to-fracture test after artificial aging in a mechanical cycling machine (150 N, 5 × 106 cycles, 10 Hz). Lastly, stress distribution was assessed by three-dimensional finite element analysis (3D-FEA), simulating the specimens restoration by two types of composite resins of low and high elastic modulus (8 and 18 GPa respectively) after the access cavities. The data were submitted to Shapiro-Wilk and KS normality tests. Then, they were analyzed by one-way ANOVA and Tukey tests with a significance level (α ≤ 0.05). RESULTS: CBCT scans showed a significant difference of worn tissues in CAC and TAC when compared to the IAC (P < 0.0001). In deflection test, CAC showed lower deformation values than the TAC and IAC. Load-to-fracture test presented no significant difference among the three experimental groups (P = 0.6901). 3D-FEA showed that the more conservative the access cavity, the higher the stress magnitude. CONCLUSIONS: CAC promote less worn tissue; however, this does not improve the stress distribution or fracture resistance of endodontically treated maxillary incisors. CLINICAL RELEVANCE: Clinicians should reconsider the pros and cons of the conservative access cavity.
Asunto(s)
Caries Dental , Fracturas de los Dientes , Diente no Vital , Resinas Acrílicas , Resinas Compuestas , Restauración Dental Permanente/métodos , Análisis del Estrés Dental , Humanos , Incisivo , Estrés Mecánico , Diente no Vital/terapiaRESUMEN
OBJECTIVES: To make an in vitro assessment of fracture resistance of weakened and non-weakened teeth receiving intraradicular reinforcement using Rebilda bundled glass fiber-reinforced composite posts (GT), Rebilda conventional glass fiber posts (RP), or both systems combined (GT + RP). MATERIALS AND METHODS: Eighty sound bovine incisors were prepared and divided randomly into eight groups as follows: (a) nWnR: without simulating weakness, and without intraradicular reinforcement; (b) WnR: simulating weakness, but without intraradicular reinforcement; (c) nWGT: without simulating weakness, but with GT; (d) WGT: simulating weakness, and with GT; (e) nWRP: without simulating weakness, but with RP; (f) WRP: simulating weakness, and with RP; (g) nWGTRP: without simulating weakness, but with GT + RP; (h) WGTRP: simulating weakness, and with GT + RP. The specimens were subjected to the load-to-fracture test using the DL-2000MF universal testing machine. The finite element method assessed the mechanical behavior and stress distribution in endodontically treated teeth. RESULTS: The groups nWGTRP and WGTRP presented the best results in the load-to-fracture test, with the former being better than the latter, but with no statistically significant difference (P > 0.05). However, there was a significant difference between these and the other groups (P < 0.05), except for nWRP. Stress distribution inside the canal wall was different among the groups, with promising mechanical behavior for nWGTRP and nWRP. CONCLUSIONS: The Rebilda conventional fiber post (RP), combined with the Rebilda bundled glass fiber-reinforced composite post (GT) improves the resistance and stress distribution of immature teeth. CLINICAL RELEVANCE: Longitudinal fracture is less frequent in teeth restored with GT and RP posts.
Asunto(s)
Técnica de Perno Muñón , Fracturas de los Dientes , Diente no Vital , Animales , Bovinos , Resinas Compuestas , Materiales Dentales , Análisis del Estrés Dental , Vidrio , Ensayo de Materiales , Estrés Mecánico , Fracturas de los Dientes/prevención & controlRESUMEN
Dental composites are aesthetic materials widely used in Dentistry for replacing hard dental tissues lost due to caries or traumas. The aim of this study was to fabricate low-shrinkage dental composite charged with nanoclay fillers (montmorillonite Cloisite®-MMT) and evaluate their cytotoxicity and physicomechanical properties. Four dental composites were produced from the same organic matrix: Bis-GMA/TEGDMA (30 wt.%). The filler system was constituted of BaSi, SiO2, and MMT in the following concentrations (wt.%): 93.8/6.2/0, 89.1/5.9/5, 86.7/5.8/7.5, and 84.4/5.6/10 (E0: 0; E5: 5%; E7.5: 7.5%; E10: 10% of MMT nanoclays). The following properties were tested: in vitro cytotoxicity, flexural strength, elastic modulus, volumetric shrinkage, water sorption, water solubility, and hygroscopic expansion. Scanning electron microscopy was used to characterize composites' topography. Data were analyzed by one-way ANOVA and Tukey's HSD post hoc test (p < 0.05). MMT nanoclays did not affect the cytotoxicity. E5 and E7.5 groups showed a significant decrease in polymerization shrinkage while maintained the overall physicomechanical properties. The inclusion of 5 and 7.5 wt.% of MMT nanoclays allowed the fabrication of dental composites with low cytotoxicity and low polymerization shrinkage, without jeopardizing the overall behaviour of their physicomechanical properties (flexural strength, elastic modulus, water sorption, water solubility, and hygroscopic expansion). These aspects suggest that the usage of MMT nanoclays could be an effective strategy to formulate new dental composites with clinical applicability.
Asunto(s)
Bentonita , Resinas Compuestas , Bisfenol A Glicidil Metacrilato , Módulo de Elasticidad , Ensayo de Materiales , Metacrilatos , Polimerizacion , Ácidos Polimetacrílicos , Dióxido de Silicio , Propiedades de SuperficieRESUMEN
STATEMENT OF PROBLEM: Wear of the maxillary canine cusps is a common clinical condition which can affect function and esthetics and, in some situations, lead to occlusal pathology. The mechanical behavior of different restorative techniques for the condition is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the biomechanical behavior of direct or indirect restorative techniques used in restoring canine guidance. MATERIAL AND METHODS: Three-dimensional models obtained from 10 extracted undamaged maxillary canines were modeled by using reverse engineering. Each model received 2 different preparations: incisal (I) or incisal and labial (IL), restored with composite resin (CR) or ceramic (C), compared with unrestored teeth (U). Finite element analysis was used to evaluate the total deformation and the maximum principal stress. For the in vitro wear test, 30 teeth were divided into groups: U (control), I-CR, and IL-C. The teeth were wear tested for 240 000 cycles with a 2-mm sliding contact, a load of 49 N applied, with a 4-Hz cycle with a composite resin piston as antagonist. The wear of restorations and antagonists was quantified by the digital image correlation technique. The 1-way analysis of variance test for total deformation and the Tukey test for the maximum principal stress were used (α=.05) to statistically analyze the data. The Friedman test was applied in the comparison between wear cycles, and the Tukey test was used in the comparison among groups. RESULTS: No significant difference was found among groups (P>.05) for the total deformation. IL-CR showed a higher failure probability, reaching stress peaks which exceeded the tensile strength of the material. I-CR showed greater wear in the in vitro test than IL-C (P=.02). No difference was found among groups in antagonist wear (P=.074). CONCLUSIONS: Ceramic restorations with labial involvement show biomechanical behavior closer to that of unrestored teeth in restoring canine guidance compared with composite resin.
Asunto(s)
Resinas Compuestas , Porcelana Dental , Cerámica/uso terapéutico , Resinas Compuestas/uso terapéutico , Oclusión Dental , Análisis del Estrés Dental , Estética Dental , Análisis de Elementos Finitos , Ensayo de MaterialesRESUMEN
STATEMENT OF PROBLEM: Whether a computer-aided design and computer-aided manufacture (CAD-CAM) fabricated high-translucency lithium disilicate veneer on a lithium disilicate substructure would increase the strength of the restoration compared with a traditional feldspathic porcelain veneer is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the effect of different lithium disilicate veneer application methods on a lithium disilicate substructure on their biaxial flexural stress (BFS). MATERIAL AND METHODS: Lithium disilicate disks were fabricated so that when combined with the veneering disks, they had a dimension of 12×1.2 mm. Experimental groups were as follows (n=15): resin-bonded lithium disilicate veneer, lithium disilicate veneer adhesively cemented to lithium disilicate; sintered lithium disilicate veneer, lithium disilicate veneer sintered to lithium disilicate; sintered feldspathic veneer, feldspathic porcelain applied to lithium disilicate; and monolithic lithium disilicate, the control group. Weibull distribution survival analysis was used to compare the differences in the resistance to fracture after fatigue. The total number of cycles was analyzed by using 1-way ANOVA (α=.05). A finite element analysis (FEA) was also performed. The maximum principal stress (MPS) was used as the failure criterion. RESULTS: The sintered feldspathic veneer group had significantly lower fatigue resistance than sintered lithium disilicate veneer or resin-bonded lithium disilicate veneer (P<.05). The resin-bonded lithium disilicate veneer group showed significantly more fractured fragments than the other groups. No statistical difference was observed in the number of cycles. The lithium disilicate veneered groups presented similar resistance to fatigue as the monolithic specimens of the same overall dimensions. Higher peaks of MPS were observed for groups monolithic lithium disilicate, sintered lithium disilicate veneer, and sintered feldspathic veneer than for resin-bonded lithium disilicate veneer. CONCLUSIONS: Veneering a lithium disilicate substructure with a lithium disilicate veneer, bonded or sintered, increased resistance to fatigue compared with a feldspathic porcelain veneer. The lithium disilicate veneer groups had similar fatigue resistance to that of the monolithic group.
Asunto(s)
Diseño Asistido por Computadora , Porcelana Dental , Porcelana Dental/química , Análisis del Estrés Dental , Ensayo de Materiales , Propiedades de Superficie , Materiales Dentales/química , Cerámica/química , Circonio/químicaRESUMEN
STATEMENT OF PROBLEM: The trueness and precision of intraoral scanners (IOSs) and the effect of intracoronal restorations have been reported. However, studies addressing the accuracy of IOSs in reproducing different complete coverage onlay preparation designs are lacking. PURPOSE: The purpose of this in vitro study was to evaluate the influence of complete coverage onlay preparation design and intraoral scanning devices on the accuracy of digital scans in terms of trueness and precision. MATERIAL AND METHODS: Three preparation designs on the mandibular first molar were considered: a traditional preparation design with isthmus reduction (IST), a traditional preparation design without isthmus reduction (wIST), and simplified nonretentive preparation (nRET). Digital scans of epoxy resin mandibular arch reference models of the preparations (containing second premolar, first molar, and second molar) were obtained by using 3 IOSs (iTero Element 2 [ELE], Trios 3 [TRI], and Primescan [PRI]) (n=10). Trueness (µm) and precision (µm) were analyzed by superimposing the digital scan on the digital reference models obtained with a high-accuracy industrial scanner (ATOS Core 80) in a tridimensional metrology software program. Accuracy was quantified by the absolute deviation (µm). Local and overall mean positive and negative deviations for trueness were also obtained. Data were analyzed by using the Kruskal-Wallis and Dunn tests with a statistical software program (α=.05). RESULTS: The nonretentive preparation groups obtained higher trueness (3.8 µm) and precision (2.7 µm) than the IST and wIST groups (trueness=7.5 to 6.3 µm, precision=5.5 to 4.6 µm). Trueness values were lower with ELE×IST (16 µm), followed by ELE×wIST (13 µm), and PRI×IST (7.8 µm). In general, no difference was found between PRI and TRI scanners (6.3 to 5.9 µm), with lower performance for ELE (13 µm). Positive deviations were higher on the proximal box of the IST and wIST preparation and on the occlusal box of the IST group. Negative deviation was higher on the ELE×IST occlusal box. CONCLUSIONS: Different intraoral scanners and preparation designs influenced the accuracy of digital scans. A more complex preparation such as IST and wIST showed higher deviation. The iTero Element 2 scanner exhibited higher deviation for both trueness and precision.
RESUMEN
Objectives: This study aimed to characterize the findings in cerebral spinal fluid (CSF) analysis of horses, cattle, and sheep diagnosed with rabies. Animals: The study included 62 animals (horses, cattle, and sheep) diagnosed with rabies at a referral hospital. Methods: This was a retrospective study using medical records from large animals with neurological signs and confirmed positive direct immunofluorescence test for rabies from 2003 to 2020. The results of CSF analysis are presented descriptively. Results: Cerebral spinal fluid samples (N = 67) from 62 animals (31 horses, 24 cattle, and 7 sheep) were retrospectively evaluated. Of these 3 species, 28% (19/67) showed increased protein concentration, whereas 58% (39/67) presented mononuclear pleocytosis. In total, 37% of the samples (25/67) had protein concentration and total nucleated cell count within the reference range. Conclusions and clinical relevance: Cerebral spinal fluid from animals diagnosed with rabies was either normal or characterized by mild mononuclear pleocytosis and hyperproteinorrachia.
Analyse du liquide céphalo-rachidien chez des chevaux, bovins et moutons diagnostiqués avec la rage: une étude rétrospective de 62 cas. Objectifs: Cette étude visait à caractériser les résultats de l'analyse du liquide céphalo-rachidien (LCR) de chevaux, bovins et moutons diagnostiqués avec la rage. Animaux: L'étude a inclus 62 animaux (chevaux, bovins et moutons) diagnostiqués avec la rage dans un hôpital de référence. Méthodes: Il s'agissait d'une étude rétrospective utilisant les dossiers médicaux de grands animaux présentant des signes neurologiques et un test d'immunofluorescence directe confirmé positif pour la rage de 2003 à 2020. Les résultats de l'analyse du LCR sont présentés de manière descriptive. Résultats: Des échantillons de liquide céphalo-rachidien (N = 67) de 62 animaux (31 chevaux, 24 bovins et 7 moutons) ont été évalués rétrospectivement. Parmi ces 3 espèces, 28 % (19/67) présentaient une concentration accrue de protéines, tandis que 58 % (39/67) présentaient une pléocytose mononucléaire. Au total, 37 % des échantillons (25/67) avaient une concentration en protéines et un nombre total de cellules nucléées dans la plage de référence. Conclusions et pertinence clinique: Le liquide céphalo-rachidien des animaux diagnostiqués avec la rage était soit normal soit caractérisé par une légère pléocytose mononucléaire et une hyperprotéinorrachie.(Traduit par Dr Serge Messier).
Asunto(s)
Enfermedades de los Bovinos , Enfermedades de los Caballos , Rabia , Enfermedades de las Ovejas , Ovinos , Bovinos , Caballos , Animales , Estudios Retrospectivos , Rabia/diagnóstico , Rabia/veterinaria , Leucocitosis/veterinaria , Registros Médicos , Valores de Referencia , Enfermedades de los Bovinos/diagnóstico , Enfermedades de los Caballos/diagnóstico , Enfermedades de las Ovejas/diagnósticoRESUMEN
Brazilian green and red propolis stand out as commercial products for different medical applications. In this article, we report the antimicrobial activities of the hydroalcoholic extracts of green (EGP) and red (ERP) propolis, as well as guttiferone E plus xanthochymol (8) and oblongifolinâ B (9) from red propolis, against multidrug-resistant bacteria (MDRB). We undertook the minimal inhibitory (MIC) and bactericidal (MBC) concentrations, inhibition of biofilm formation (MICB50 ), catalase, coagulase, DNase, lipase, and hemolysin assays, along with molecular docking simulations. ERP was more effective by displaying MIC and MBC values <100â µg mL-1 . Compoundsâ 8 andâ 9 displayed the lowest MIC values (0.98 to 31.25â µg mL-1 ) against all tested Gram-positive MDRB. They also inhibited the biofilm formation of S. aureus (ATCC 43300 and clinical isolate) and S. epidermidis (ATCC 14990 and clinical isolate), with MICB50 values between 1.56 and 6.25â µg mL-1 . The molecular docking results indicated thatâ 8 andâ 9 might interact with the catalase's amino acids. Compounds 8 and 9 have great antimicrobial potential.