Dynamic Functional Connectivity between order and randomness and its evolution across the human adult lifespan.

Functional Connectivity (FC) during resting-state or task conditions is not static but inherently dynamic. Yet, there is no consensus on whether fluctuations in FC may resemble isolated transitions between discrete FC states rather than continuous changes. This quarrel hampers advancing the study of dynamic FC. This is unfortunate as the structure of fluctuations in FC can certainly provide more information about developmental changes, aging, and progression of pathologies. We merge the two perspectives and consider dynamic FC as an ongoing network reconfiguration, including a stochastic exploration of the space of possible steady FC states. The statistical properties of this random walk deviate both from a purely "order-driven" dynamics, in which the mean FC is preserved, and from a purely "randomness-driven" scenario, in which fluctuations of FC remain uncorrelated over time. Instead, dynamic FC has a complex structure endowed with long-range sequential correlations that give rise to transient slowing and acceleration epochs in the continuous flow of reconfiguration. Our analysis for fMRI data in healthy elderly revealed that dynamic FC tends to slow down and becomes less complex as well as more random with increasing age. These effects appear to be strongly associated with age-related changes in behavioural and cognitive performance.

On the spatiotemporal regulation of cell tensional state.

Since the emergence of mechanobiology, mechanical signals have been shown to influence almost every process in biology. Cells transduce mechanical signals into biochemical signaling pathways, adjust their behavior and/or phenotype before transmitting these signals to neighboring cells. Mechanical signals thus appear as information, which can be "written" by cells in the surrounding extracellular matrix, "transmitted" through it and "read" by other cells. This brief review summarizes our current understanding of the mechanisms regulating the tensional state of cells and tissues subjected to mechanical perturbations, prior to examining existing or potential experimental approaches to study these mechanisms.

Beyond mice: Emerging and transdisciplinary models for the study of early-onset myopathies.

The use of the adapted models to decipher patho-physiological mechanisms of human diseases is always a great challenge. This is of particular importance for early-onset myopathies, in which pathological mutations often impact not only on muscle structure and function but also on developmental processes. Mice are currently the main animal model used to study neuromuscular disorders including the early-onset myopathies. However strategies based on simple animal models and on transdisciplinary approaches exploring mechanical muscle cell properties emerge as attractive, non-exclusive alternatives. These new ways provide valuable opportunities to improve our knowledge on how mechanical, biochemical, and genetic/epigenetic cues modulate the formation, organization and function of muscle tissues. Here we provide an overview of how single cell and micro-tissue engineering in parallel to non-mammalian, Drosophila and zebrafish models could contribute to filling gaps in our understanding of pathogenic mechanisms underlying early-onset myopathies. We also discuss their potential impact on designing new diagnostic and therapeutic strategies.

Confinement-Induced Transition between Wavelike Collective Cell Migration Modes.

The structural and functional organization of biological tissues relies on the intricate interplay between chemical and mechanical signaling. Whereas the role of constant and transient mechanical perturbations is generally accepted, several studies recently highlighted the existence of long-range mechanical excitations (i.e., waves) at the supracellular level. Here, we confine epithelial cell monolayers to quasi-one-dimensional geometries, to force the establishment of tissue-level waves of well-defined wavelength and period. Numerical simulations based on a self-propelled Voronoi model reproduce the observed waves and exhibit a phase transition between a global and a multinodal wave, controlled by the confinement size. We confirm experimentally the existence of such a phase transition, and show that wavelength and period are independent of the confinement length. Together, these results demonstrate the intrinsic origin of tissue oscillations, which could provide cells with a mechanism to accurately measure distances at the supracellular level.

Construction and myogenic differentiation of 3D myoblast tissues fabricated by fibronectin-gelatin nanofilm coating.

In this study, we used a recently developed approach of coating the cells with fibronectin-gelatin nanofilms to build 3D skeletal muscle tissue models. We constructed the microtissues from C2C12 myoblasts and subsequently differentiated them to form muscle-like tissue. The thickness of the constructs could be successfully controlled by altering the number of seeded cells. We were able to build up to ∼76 µm thick 3D constructs that formed multinucleated myotubes. We also found that Rho-kinase inhibitor Y27632 improved myotube formation in thick constructs. Our approach makes it possible to rapidly form 3D muscle tissues and is promising for the in vitro construction of physiologically relevant human skeletal muscle tissue models.

Quick and easy microfabrication of T-shaped cantilevers to generate arrays of microtissues.

Over the past decade, a major effort was made to miniaturize engineered tissues, as to further improve the throughput of such approach. Most existing methods for generating microtissues thus rely on T-shaped cantilevers made by soft lithography and based on the use of negative SU-8 photoresist. However, photopatterning T-shaped microstructures with these negative photoresists is fastidious and time-consuming. Here we introduce a novel method to quickly generate T-shaped cantilevers dedicated to generation of cellular microtissues, based on the use of positive photoresist. With only two layers of photoresist and one photomask, we were able to fabricate arrays of microwells in less than 3 h, each containing two T-shaped cantilevers presenting either a rectangular or a circular geometry. As a proof of concept, these arrays were then replicated in poly(dimethylsiloxane) and microtissues composed of NIH 3T3 fibroblasts encapsulated in collagen I were generated, while the two cantilevers simultaneously constrain and report forces generated by the microtissues. Immunostainings showed longitudinally aligned and elongated fibroblasts over the whole microtissue after 8 days of culture. The method described here opens the potential to quick prototyping platforms for high-throughput, low-volume screening applications.

Substrate Stiffness Combined with Hepatocyte Growth Factor Modulates Endothelial Cell Behavior.

Endothelial cells (ECs) play a crucial role in regulating various physiological and pathological processes. The behavior of ECs is modulated by physical (e.g., substrate stiffness) and biochemical cues (e.g., growth factors). However, the synergistic influence of these cues on EC behavior has rarely been investigated. In this study, we constructed poly(l-lysine)/hyaluronan (PLL/HA) multilayer films with different stiffness and exposed ECs to these substrates with and without hepatocyte growth factor (HGF)-supplemented culture medium. We demonstrated that EC adhesion, migration, and proliferation were positively correlated with substrate stiffness and that these behaviors were further promoted by HGF. Interestingly, ECs on the lower stiffness substrates showed stronger responses to HGF in terms of migration and proliferation, suggesting that HGF can profoundly influence stiffness-dependent EC behavior correlated with EC growth. After the formation of an EC monolayer, EC behaviors correlated with endothelial function were evaluated by characterizing monolayer integrity, nitric oxide production, and gene expression of endothelial nitric oxide synthase. For the first time, we demonstrated that endothelial function displayed a negative correlation with substrate stiffness. Although HGF improved endothelial function, HGF was not able to change the stiffness-dependent manner of endothelial functions. Taken together, this study provides insights into the synergetic influence of physical and biochemical cues on EC behavior and offers great potential in the development of optimized biomaterials for EC-based regenerative medicine.

Necking and failure of constrained 3D microtissues induced by cellular tension.

In this paper we report a fundamental morphological instability of constrained 3D microtissues induced by positive chemomechanical feedback between actomyosin-driven contraction and the mechanical stresses arising from the constraints. Using a 3D model for mechanotransduction we find that perturbations in the shape of contractile tissues grow in an unstable manner leading to formation of "necks" that lead to the failure of the tissue by narrowing and subsequent elongation. The magnitude of the instability is shown to be determined by the level of active contractile strain, the stiffness of the extracellular matrix, and the components of the tissue that act in parallel with the active component and the stiffness of the boundaries that constrain the tissue. A phase diagram that demarcates stable and unstable behavior of 3D tissues as a function of these material parameters is derived. The predictions of our model are verified by analyzing the necking and failure of normal human fibroblast tissue constrained in a loop-ended dog-bone geometry and cardiac microtissues constrained between microcantilevers. By analyzing the time evolution of the morphology of the constrained tissues we have quantitatively determined the chemomechanical coupling parameters that characterize the generation of active stresses in these tissues. More generally, the analytical and numerical methods we have developed provide a quantitative framework to study how contractility can influence tissue morphology in complex 3D environments such as morphogenesis and organogenesis.

Differences in Morphology and Traction Generation of Cell Lines Representing Different Stages of Osteogenesis.

Osteogenesis is the process by which mesenchymal stem cells differentiate to osteoblasts and form bone. The morphology and root mean squared (RMS) traction of four cell types representing different stages of osteogenesis were quantified. Undifferentiated D1, differentiated D1, MC3T3-E1, and MLO-A5 cell types were evaluated using both automated image analysis of cells stained for F-actin and by traction force microscopy (TFM). Undifferentiated mesenchymal stem cell lines were small, spindly, and exerted low traction, while differentiated osteoblasts were large, had multiple processes, and exerted higher traction. Size, shape, and traction all correlated with the differentiation stage. Thus, cell morphology evolved and RMS traction increased with differentiation. The results provide a foundation for further work with these cell lines to study the mechanobiology of bone formation.

Development and characterization of a 3D multicell microtissue culture model of airway smooth muscle.

Airway smooth muscle (ASM) cellular and molecular biology is typically studied with single-cell cultures grown on flat 2D substrates. However, cells in vivo exist as part of complex 3D structures, and it is well established in other cell types that altering substrate geometry exerts potent effects on phenotype and function. These factors may be especially relevant to asthma, a disease characterized by structural remodeling of the airway wall, and highlights a need for more physiologically relevant models of ASM function. We utilized a tissue engineering platform known as microfabricated tissue gauges to develop a 3D culture model of ASM featuring arrays of ∼0.4 mm long, ∼350 cell "microtissues" capable of simultaneous contractile force measurement and cell-level microscopy. ASM-only microtissues generated baseline tension, exhibited strong cellular organization, and developed actin stress fibers, but lost structural integrity and dissociated from the cantilevers within 3 days. Addition of 3T3-fibroblasts dramatically improved survival times without affecting tension development or morphology. ASM-3T3 microtissues contracted similarly to ex vivo ASM, exhibiting reproducible responses to a range of contractile and relaxant agents. Compared with 2D cultures, microtissues demonstrated identical responses to acetylcholine and KCl, but not histamine, forskolin, or cytochalasin D, suggesting that contractility is regulated by substrate geometry. Microtissues represent a novel model for studying ASM, incorporating a physiological 3D structure, realistic mechanical environment, coculture of multiple cells types, and comparable contractile properties to existing models. This new model allows for rapid screening of biochemical and mechanical factors to provide insight into ASM dysfunction in asthma.

Rigidity-patterned polyelectrolyte films to control myoblast cell adhesion and spatial organization.

In vivo, cells are sensitive to the stiffness of their micro-environment and especially to the spatial organization of the stiffness. In vitro studies of this phenomenon can help to better understand the mechanisms of the cell response to spatial variations of the matrix stiffness. In this work, we design polelyelectrolyte multilayer films made of poly(L-lysine) and a photo-reactive hyaluronan derivative. These films can be photo-crosslinked through a photomask to create spatial patterns of rigidity. Quartz substrates incorporating a chromium mask are prepared to expose selectively the film to UV light (in a physiological buffer), without any direct contact between the photomask and the soft film. We show that these micropatterns are chemically homogeneous and flat, without any preferential adsorption of adhesive proteins. Three groups of pattern geometries differing by their shape (circles or lines), size (form 2 to 100 µm) or interspacing distance between the motifs are used to study the adhesion and spatial organization of myoblast cells. On large circular micropatterns, the cells form large assemblies that are confined to the stiffest parts. Conversely, when the size of the rigidity patterns is subcellular, the cells respond by forming protrusions. Finally, on linear micropatterns of rigidity, myoblasts align and their nuclei drastically elongate in specific conditions. These results pave the way for the study of the different steps of myoblast fusion in response to matrix rigidity in well-defined geometrical conditions.

Free-standing polyelectrolyte membranes made of chitosan and alginate.

Free-standing films have increasing applications in the biomedical field as drug delivery systems for wound healing and tissue engineering. Here, we prepared free-standing membranes by the layer-by-layer assembly of chitosan and alginate, two widely used biomaterials. Our aim was to produce a thick membrane and to study the permeation of model drugs and the adhesion of muscle cells. We first defined the optimal growth conditions in terms of pH and alginate concentration. The membranes could be easily detached from polystyrene or polypropylene substrate without any postprocessing step. The dry thickness was varied over a large range from 4 to 35 µm. A 2-fold swelling was observed by confocal microscopy when they were immersed in PBS. In addition, we quantified the permeation of model drugs (fluorescent dextrans) through the free-standing membrane, which depended on the dextran molecular weight. Finally, we showed that myoblast cells exhibited a preferential adhesion on the alginate-ending membrane as compared to the chitosan-ending membrane or to the substrate side.

Light-driven biological actuators to probe the rheology of 3D microtissues.

The mechanical properties of biological tissues are key to their physical integrity and function. Although external loading or biochemical treatments allow the estimation of these properties globally, it remains difficult to assess how such external stimuli compare with cell-generated contractions. Here we engineer microtissues composed of optogenetically-modified fibroblasts encapsulated within collagen. Using light to control the activity of RhoA, a major regulator of cellular contractility, we induce local contractions within microtissues, while monitoring microtissue stress and strain. We investigate the regulation of these local contractions and their spatio-temporal distribution. We demonstrate the potential of our technique for quantifying tissue elasticity and strain propagation, before examining the possibility of using light to create and map local anisotropies in mechanically heterogeneous microtissues. Altogether, our results open an avenue to guide the formation of tissues while non-destructively charting their rheology in real time, using their own constituting cells as internal actuators.

Force propagation between epithelial cells depends on active coupling and mechano-structural polarization.

Cell-generated forces play a major role in coordinating the large-scale behavior of cell assemblies, in particular during development, wound healing, and cancer. Mechanical signals propagate faster than biochemical signals, but can have similar effects, especially in epithelial tissues with strong cell-cell adhesion. However, a quantitative description of the transmission chain from force generation in a sender cell, force propagation across cell-cell boundaries, and the concomitant response of receiver cells is missing. For a quantitative analysis of this important situation, here we propose a minimal model system of two epithelial cells on an H-pattern ('cell doublet'). After optogenetically activating RhoA, a major regulator of cell contractility, in the sender cell, we measure the mechanical response of the receiver cell by traction force and monolayer stress microscopies. In general, we find that the receiver cells show an active response so that the cell doublet forms a coherent unit. However, force propagation and response of the receiver cell also strongly depend on the mechano-structural polarization in the cell assembly, which is controlled by cell-matrix adhesion to the adhesive micropattern. We find that the response of the receiver cell is stronger when the mechano-structural polarization axis is oriented perpendicular to the direction of force propagation, reminiscent of the Poisson effect in passive materials. We finally show that the same effects are at work in small tissues. Our work demonstrates that cellular organization and active mechanical response of a tissue are key to maintain signal strength and lead to the emergence of elasticity, which means that signals are not dissipated like in a viscous system, but can propagate over large distances.

Polysaccharide-blend multilayers containing hyaluronan and heparin as a delivery system for rhBMP-2.

It is shown that blend multilayers of hyaluronan (HA) and heparin (HEP) as polyanions and poly(L-lysine) (PLL) as a polycation can be used to prepare films with different thicknesses and chemical compositions. The amounts of recombinant human BMP-2 (rhBMP-2) loaded and the fraction initially released from the films depend on the film's chemical composition. The amounts of rhBMP-2 loaded in the films are much higher for HA mass fractions of more than 0.4. The bioactivity of the rhBMP-2-loaded films is investigated on C2C12 myoblasts, which differentiates into osteoblasts in contact with the films. The alkaline phosphatase expression for cells grown on nanoblend films of various compositions falls over a unique curve. This suggests that the cells "sensing" the rhBMP-2 are not influenced by the film's chemistry. The rhBMP-2 can sustain at least three successive culture sequences while remaining bioactive, thus confirming the important and protective effect of rhBMP-2. Altogether, these results indicate that crosslinked PLL/HA films have superior properties for the incorporation of rhBMP-2 and on its long-lasting bioactivity.

Internal composition versus the mechanical properties of polyelectrolyte multilayer films: the influence of chemical cross-linking.

Different types of polyelectrolyte multilayer films composed of poly(L-lysine)/hyaluronan (PLL/HA), chitosan/hyaluronan (CHI/HA) and poly(allylamine hydrochloride)/poly(L-glutamic acid) (PAH/PGA) have been investigated for their internal composition, including water content, ion pairing, and ability to be covalently cross-linked, as well as for their mechanical properties. Film buildup under physiological conditions was monitored by the quartz crystal microbalance with dissipation monitoring (QCM-D) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), which allows unambiguous quantification of the different groups present in the polyelectrolytes. (PAH/PGA) films emerged as the most dense films with the lowest hydration (29%) and the highest COO(-) molar density. In addition, PAH is greatly in excess in these films (3 PAH monomers per PGA monomer). The formation of amide bonds during film cross-linking using the water-soluble carbodiimide EDC was also investigated. All of the films could be cross-linked in a tunable manner, but PAH/PGA exhibited the highest absolute number of amide bonds created, approximately 7 times more than for (PLL/HA) and (CHI/HA) films. The Young's modulus E of the films measured by AFM nanoindentation was shown to vary over 1 to 2 orders of magnitude for the different systems. Interestingly, a linear relationship between E and the density of the covalent cross-links created was observed for (PLL/HA) and (CHI/HA) films whereas (PGA/PAH) films exhibited biphasic behavior. The mean distance between covalent cross-links was estimated to be approximately 11 nm for (PLL/HA) and (CHI/HA) films and only approximately 6 nm for (PAH/PGA) films for the maximum EDC concentration tested (100 mg/mL).

Alkylamino hydrazide derivatives of hyaluronic acid: synthesis, characterization in semidilute aqueous solutions, and assembly into thin multilayer films.

A series of biodegradable alkylamino hydrazide hyaluronic acid (HA) derivatives were prepared and used to design new biocompatible films able to release hydrophobic drugs in a controlled manner. The first step of this work thus consisted in optimizing the synthetic conditions of hydrazide HA derivatives bearing pendant hexyl, octyl, decyl, and citronellyl chains with a degree of substitution of 0.05 or 0.10. The behavior in aqueous solution of these water-soluble modified HA samples was then examined in the semidilute regime. The decylamino hydrazide derivatives of HA exhibited remarkable associating properties, giving rise to transparent gels. These gels were found to be more resistant to degradation by hyaluronidase compared to solutions of nonmodified HA at the same concentration. The other derivatives of which the lengths of grafted alkyl chains range from 6 to 8 carbon atoms lead to more or less viscous solutions. Different viscometric features for these derivatives could be observed as a function of the molecular weight of HA. As derivatives prepared from a HA sample of 600,000 g/mol (HA-600) exhibited a much higher tendency to self-aggregate than their counterparts prepared from a HA sample of 200,000 g/mol (HA-200), the latter derivatives were selected for the build up of multilayer films. The topography and z-section of (PLL/HA derivatives) films assembled layer-by-layer were observed by atomic force microscopy (AFM) in liquid and confocal laser scanning microscopy (CLSM) using PLL(FITC) as ending layer. Moreover, the ability of the films made of the different HA derivatives to incorporate the hydrophobic dye nile red (NR) was investigated. Films containing decylamino hydrazide HA derivatives were the most efficient for incorporating and retaining nile red, which confirms the formation of stable hydrophobic nanodomains in the films.

Magneto-active substrates for local mechanical stimulation of living cells.

Cells are able to sense and react to their physical environment by translating a mechanical cue into an intracellular biochemical signal that triggers biological and mechanical responses. This process, called mechanotransduction, controls essential cellular functions such as proliferation and migration. The cellular response to an external mechanical stimulation has been investigated with various static and dynamic systems, so far limited to global deformations or to local stimulation through discrete substrates. To apply local and dynamic mechanical constraints at the single cell scale through a continuous surface, we have developed and modelled magneto-active substrates made of magnetic micro-pillars embedded in an elastomer. Constrained and unconstrained substrates are analysed to map surface stress resulting from the magnetic actuation of the micro-pillars and the adherent cells. These substrates have a rigidity in the range of cell matrices, and the magnetic micro-pillars generate local forces in the range of cellular forces, both in traction and compression. As an application, we followed the protrusive activity of cells subjected to dynamic stimulations. Our magneto-active substrates thus represent a new tool to study mechanotransduction in single cells, and complement existing techniques by exerting a local and dynamic stimulation, traction and compression, through a continuous soft substrate.

Signal mingle: Micropatterns of BMP-2 and fibronectin on soft biopolymeric films regulate myoblast shape and SMAD signaling.

In vivo, bone morphogenetic protein 2 (BMP-2) exists both in solution and bound to the extracellular matrix (ECM). While these two modes of presentation are known to influence cell behavior distinctly, their role in the niche microenvironment and their functional relevance in the genesis of a biological response has sparsely been investigated at a cellular level. Here we used the natural affinity of BMP-2 for fibronectin (FN) to engineer cell-sized micropatterns of BMP-2. This technique allowed the simultaneous control of the spatial presentation of fibronectin-bound BMP-2 and cell spreading. These micropatterns induced a specific actin and adhesion organization around the nucleus, and triggered the phosphorylation and nuclear translocation of SMAD1/5/8 in C2C12 myoblasts and mesenchymal stem cells, an early indicator of their osteoblastic trans-differentiation. We found that cell spreading itself potentiated a BMP-2-dependent phosphorylation of SMAD1/5/8. Finally, we demonstrated that FN/BMP-2-mediated early SMAD signaling depended on LIM kinase 2 and ROCK, rather than myosin II activation. Altogether, our results show that FN/BMP-2 micropatterns are a useful tool to study the mechanisms underlying BMP-2-mediated mechanotransduction. More broadly, our approach could be adapted to other combinations of ECM proteins and growth factors, opening an exciting avenue to recreate tissue-specific niches in vitro.

Quiescence of human muscle stem cells is favored by culture on natural biopolymeric films.

BACKGROUND: Satellite cells are quiescent resident muscle stem cells that present an important potential to regenerate damaged tissue. However, this potential is diminished once they are removed from their niche environment in vivo, prohibiting the long-term study and genetic investigation of these cells. This study therefore aimed to provide a novel biomaterial platform for the in-vitro culture of human satellite cells that maintains their stem-like quiescent state, an important step for cell therapeutic studies. METHODS: Human muscle satellite cells were isolated from two donors and cultured on soft biopolymeric films of controlled stiffness. Cell adhesive phenotype, maintenance of satellite cell quiescence and capacity for gene manipulation were investigated using FACS, western blotting, fluorescence microscopy and electron microscopy. RESULTS: About 85% of satellite cells cultured in vitro on soft biopolymer films for 3 days maintained expression of the quiescence marker Pax7, as compared with 60% on stiffer films and 50% on tissue culture plastic. The soft biopolymeric films allowed satellite cell culture for up to 6 days without renewing the media. These cells retained their stem-like properties, as evidenced by the expression of stem cell markers and reduced expression of differentiated markers. In addition, 95% of cells grown on these soft biopolymeric films were in the G0/G1 stage of the cell cycle, as opposed to those grown on plastic that became activated and began to proliferate and differentiate. CONCLUSIONS: Our study identifies a new biomaterial made of a biopolymer thin film for the maintenance of the quiescence state of muscle satellite cells. These cells could be activated at any point simply by replating them onto a plastic culture dish. Furthermore, these cells could be genetically manipulated by viral transduction, showing that this biomaterial may be further used for therapeutic strategies.