The structure and composition of deciduous enamel affected by local hypoplastic autosomal dominant amelogenesis imperfecta resulting from an ENAM mutation.

In a group of families in northern Sweden, a mutation in the ENAM gene (predicted to produce a highly truncated protein) results in the local hypoplastic form of autosomal dominant amelogenesis imperfecta. In this study, sections of deciduous teeth from members of 3 of these families were examined by scanning electron microscopy (SEM) and the enamel mineral was analysed by energy dispersive X-ray spectroscopy (EDX). The sections were also probed with antibodies raised to a conserved sequence of the enamelin protein. Selected intact teeth were first analysed by digital imaging and ascribed with an 'Enamel Defects Index' (EDI) score. SEM of tooth sections revealed disrupted prism morphology and the prisms had a glass-like appearance in some areas. These areas of dysplasia were sometimes irregular but formed regular arrays in others. Comparison of EDI scores with SEM indicated that in one tooth the surface had no measurable defects but significant defects were present in the underlying enamel microstructure. SEM immunohistochemistry with the antibody raised to a fragment of the enamelin protein produced positive, but light, labelling throughout normal enamel. In dysplastic areas, however, the labelling intensity appeared to be reduced. The results indicate that the presence of functional enamelin in the correct amounts is necessary for correct prism morphogenesis. In addition, a combination of EDI and structural analysis indicate that defects in enamel microstructure are not necessarily visible as defects on the surface of the tooth, suggesting the possibility, at least, that some instances of under-diagnosis may occur.

Gingival inflammation assessment by image analysis: measurement and validation.

AIM: Gingival inflammation may be caused by injury or plaque-related diseases and reduction in inflammation can be a useful indicator of gingival recovery. There has been little research on development of non-index methods to measure gingival condition. The aims of the study were to investigate the reliability of the measurement of changes in gingival redness and swelling, using image analysis, and to compare this approach with an established method for assessing gingival overgrowth [J Clin Periodontol 28 (2001) 81]. METHOD: Twenty volunteers with gingival inflammation were recruited and digital images were taken. Duplicate measurements were made on the first visit by two examiners. At a subsequent visit following periodontal treatment, second images were taken. Gingival changes were determined by assessing redness and tooth surface area visible between the level of the inter-proximal papillae and the gingival margin. Tooth area measurements were compared with the established gingival overgrowth method. RESULTS: The method showed excellent reliability for both intra- and inter-examiner measurements of 0.968-0.998 and 0.769-0.947, respectively, according to the classification by Donner and Eliasziw of the Fleiss coefficient of reliability (repeat measures taken during the patients' first attendance). High correlation was found for gingival encroachment when compared with the established gingival overgrowth method. CONCLUSION: This technique proved a reliable method for investigating changes in gingival redness. High correlation was found for gingival encroachment when compared with an established method.

The variability of the curvature of the labial surface of the upper anterior teeth along the facial axis of the clinical crown.

OBJECTIVE: To mathematically assess the curvature of upper anterior teeth along the facial axis of the clinical crown (FACC) line to provide information valuable for assessment of enamel growth. METHODS: Forty upper study models were chosen from the Orthodontic clinic at the Charles Clifford Dental Hospital, Sheffield, UK. The study model incisors and canines were sectioned longitudinally down the FACC line, using a Microslice II cutting machine. Images were captured that showed the proximal view of the tooth curvature from incisal edge/cusp tip to the gingival margin. The images were converted into silhouettes and saved as bitmap files. These were vectorised and converted to an outline of xy data points. The forty xy files were mathematically adjusted so the distance between incisal edge and gingival margin were of equal length. Non Rotational Principal Component Analysis (PCA) was then applied at 20 equal intervals along the curve of each xy file to describe the shape of the teeth. RESULTS: Intra class correlation coefficient for intra-operator repeatability ranged from 0.821-0.998 showing good or excellent levels of reliability. PCA showed variation between tooth types. CONCLUSIONS: The method proved reliable. All tooth types showed that the mid-point region had the greatest rise variable, indicating that the most-prominent point was central or incisal for central and lateral incisors. All were skewed towards the incisal end and had kurtosis at both ends. Central incisors showed least variability. Greater variability was seen within the incisal third than within the gingival third for all tooth types.

The clinical measurement of tooth colour and stain.

There are many contributory factors to tooth colour and different techniques for its measurement. The aim of this paper is to evaluate methods of tooth colour and stain measurement, with an emphasis on recent advances in objective clinical measurement techniques. The overall colour effect of natural teeth is created by a combination of light which is reflected and scattered by tooth enamel and the underlying dentine. Developmental defects of the dentition can affect the intrinsic discolouration of teeth, for example, amelogenesis imperfecta and dentinogenesis imperfecta. Extrinsic discolouration is predominantly caused by stain build up on a tooth surface from bacteria, foodstuffs or metalic compounds. Tooth colour and stain measurement are currently assessed using a wide range of measurement methods divided into subjective (visual shade matching) and objective instrumental assessment such as by colourimetry, spectrophotometry and digital image analysis. The most popular method of assessing tooth colour clinically is visual shade matching, as this approach is quick and simple to use. However, variation in results can occur as a consequence of the subjective nature of this method. The instrumental approaches including quantitative light-induced fluorescence remove or significantly reduce the subjective component. Image analysis appears to be the most suitable method for tooth colour measurement and further work is being carried out to establish this approach.

A digital image analysis system for the assessment of tooth whiteness compared to visual shade matching.

OBJECTIVE: To assess tooth whiteness clinically using an image analysis system and a whiteness algorithm to compare with visual shade matching. METHODOLOGY: Images of the maxillary anterior teeth of 20 subjects were obtained using an image analysis system adapted for tooth whiteness measurement. Red, green, and blue values from each image, and Commision Internationale de l'Eclairage whiteness index (CIE WI) values were calculated. A visual shade match was also carried out using a Vitapan 3D Master 26-tab shade guide. RESULTS: The range of CIE WI values for image analysis and visual shade matching was 32.86-85.91 and 32.68-79.84, respectively. Limits of agreement between methods were +17.71 and -14.60 CIE WI units. The 95% confidence interval of the difference was calculated as -0.176 to +3.083. A two-tailed Student t-test with a 95% confidence level showed significant differences (p = 0.028) between the paired CIE WI values of each tooth for the two measurement techniques. As the accuracy and reliability of the image analysis system was found to be high in previous in vitro studies, the differences between the two methods were probably related to the inherent subjectivity of visual shade matching. CONCLUSION: The adapted digital image analysis system could be used as an alternative to, or in conjunction with visual shade matching.

Measurement of stain on extracted teeth using spectrophotometry and digital image analysis.

AIM: The aim of this study was to assess the reliability and validate a customized image analysis system, designed for use within clinical trials of general dental hygiene and whitening products, for the measurement of stain levels on extracted teeth and to compare it with reflectance spectrophotometry. METHOD: Twenty non-carious extracted teeth were soaked in an artificial saliva, brushed for 1 min using an electric toothbrush and a standard toothpaste, bleached using a 5.3% hydrogen peroxide solution and cycled for 6 h daily through a tea solution. CIE L* values were obtained after each treatment step using the customized image analysis system and a reflectance spectrophotometer. A statistical analysis was carried out in SPSS. RESULTS: Fleiss' coefficient of reliability for intra-operator repeatability of the image analysis system and spectrophotometry was 0.996 and 0.946 respectively. CIE L* values were consistently higher using the image analysis compared with spectrophotometry, and t-tests for each treatment step showed significant differences (P < 0.05) for the two methods. Limits of agreement between the methods were -27.95 to +2.07, with a 95% confidence of the difference calculated as -14.26 to -11.84. The combined results for all treatment steps showed a significant difference between the methods for the CIE L* values (P < 0.05). CONCLUSION: The image analysis system has proven to be a reliable method for assessment of changes in stain level on extracted teeth. The method has been validated against reflectance spectrophotometry. This method may be used for pilot in vitro studies/trials of oral hygiene and whitening products, before expensive in vivo tests are carried out.

Surface-Sensitive Microwear Texture Analysis of Attrition and Erosion.

Scale-sensitive fractal analysis of high-resolution 3-dimensional surface reconstructions of wear patterns has advanced our knowledge in evolutionary biology, and has opened up opportunities for translatory applications in clinical practice. To elucidate the microwear characteristics of attrition and erosion in worn natural teeth, we scanned 50 extracted human teeth using a confocal profiler at a high optical resolution (X-Y, 0.17 µm; Z < 3 nm). Our hypothesis was that microwear complexity would be greater in erosion and that anisotropy would be greater in attrition. The teeth were divided into 4 groups, including 2 wear types (attrition and erosion) and 2 locations (anterior and posterior teeth; n = 12 for each anterior group, n = 13 for each posterior group) for 2 tissue types (enamel and dentine). The raw 3-dimensional data cloud was subjected to a newly developed rigorous standardization technique to reduce interscanner variability as well as to filter anomalous scanning data. Linear mixed effects (regression) analyses conducted separately for the dependent variables, complexity and anisotropy, showed the following effects of the independent variables: significant interactions between wear type and tissue type ( P = 0.0157 and P = 0.0003, respectively) and significant effects of location ( P < 0.0001 and P = 0.0035, respectively). There were significant associations between complexity and anisotropy when the dependent variable was either complexity ( P = 0.0003) or anisotropy ( P = 0.0014). Our findings of greater complexity in erosion and greater anisotropy in attrition confirm our hypothesis. The greatest geometric means were noted in dentine erosion for complexity and dentine attrition for anisotropy. Dentine also exhibited microwear characteristics that were more consistent with wear types than enamel. Overall, our findings could complement macrowear assessment in dental clinical practice and research and could assist in the early detection and management of pathologic tooth wear.

A new technique for symmetry determination in tooth morphology using image analysis: application in the diagnosis of solitary maxillary median central incisor.

OBJECTIVE: To develop a new technique for determining symmetry in tooth morphology and to evaluate this in the investigation of a patient with a solitary maxillary median central incisor (SMMCI) and a control group. DESIGN: A 9-year-old Caucasian female presented with SMMCI. Clinically the tooth appeared symmetrical. Morphology measurements of the maxillary central incisor were made using an image analysis system. Symmetry was determined by outlining the tooth from labial and axial views. These images were block filled, duplicated, flipped horizontally and then superimposed on the original image. The coincident area and perimeter of the two images from both views were measured. The method was repeated for the maxillary central incisors of 20 sets of control study models for young adult patients from which reference intervals for comparison with the SMMCI case were prepared. RESULTS: From the labial view, the area and perimeter of the two images of the SMMCI tooth were 98.85% and 98.97% coincident, respectively. From the axial view the area of the two images was 96.17% coincident, while the perimeter was 99.03% coincident. In all but one comparison for coincidence the SMMCI was above the upper limit of the reference range from the control group. CONCLUSIONS: This new technique is a valid method of assessing symmetry and is a useful clinical tool in cases of SMMCI.

A randomised controlled trial of the effect of outreach placement on treatment planning by dental students.

UNLABELLED: Undergraduate dental students' curricula are being supplemented with primary care placements. OBJECTIVE: To compare the effect of outreach placement and traditional hospital-based training alone on students' treatment planning ability. DESIGN: Randomised controlled trial.Setting Four existing primary care placements in England during 2004. SUBJECTS AND METHODS: At follow-up the fourth-year students took a history from a standard 'patient' then recorded a treatment plan. Interview skill was scored. The history and plan were assessed by clinicians blind to the intervention. INTERVENTION: Five-week block outreach placements for 25 of 49 students. MAIN OUTCOME MEASURES: Interviewing skill, quality of dental and social histories, the appropriateness of planned treatments and the consideration of wider issues. RESULTS: The two groups were similar in the scores for interviewing and taking a dental history. The outreach group scored higher for capturing a social history (outreach mean 4.4, SD = 2.1, n = 22 and hospital 2.8, SD = 1.9, n = 23; p = 0.01) and for developing an appropriate treatment plan (5.6 [SD = 2.1] and 3.9 [SD = 2.3]; p = 0.01). There were no differences in scores relating to the wider issues. CONCLUSION: Dental outreach training was significantly more effective than traditional training alone in improving students' ability to capture relevant points of social history from a patient and to consider them when planning treatment.

Visual whiteness ranking of a Vitapan 3D Master shade guide by untrained assessors.

OBJECTIVE: This study was conducted to obtain the ranking order of a 29-tab (including three "bleaching tabs") Vita Shade Guide for perceived "whiteness" by untrained assessors, and to compare this ranking with both the shade guide manufacturer's rank order and a colorimetrically derived rank order. METHODOLOGY: A total of 85 people, not trained in color assessment by shade guides, were asked to rank order the tabs of a Vitapan 3D Master shade guide for perceived "whiteness" under standardized lighting conditions. A whiteness ranking was also obtained colorimetrically using a Minolta CM-2600d spectrophotometer calibrated to give CIE whiteness values. The data were analysed using means, standard deviations, and standard errors. RESULTS: The assessors varied more in their rankings for darker shades than the lighter ones. The order derived by the assessors and the colorimetry order did not match well with the manufacturer's order, especially toward the darker shades. CONCLUSION: For use in studies of whitening products, a new order of the Vitapan 3D Master shade guide tabs has been developed in relation to whiteness.

Tooth size in patients with supernumerary teeth and a control group measured by image analysis system.

OBJECTIVE: The aim of this study was to compare tooth size measurements between patients with supernumerary teeth and a control group. METHOD: The supernumerary group consisted of 56 subjects (21 females and 35 males) and the control group of 40 subjects (20 females and 20 males). All available permanent teeth on the dental casts were imaged and measured from both buccal and occlusal views using an image analysis system. Mesio-distal, bucco-lingual or occluso-gingival dimensions, area and perimeter were measured from each view. RESULTS: Supernumerary tooth patients tended to have larger tooth size measurements for almost all variables than controls. Significant differences (p<0.05) were found for the mesio-distal dimension of the upper and lower incisors and the bucco-lingual dimensions of the lower first premolars. CONCLUSIONS: The results are compatible with supernumerary teeth being a complex dental anomaly with a multifactorial aetiology in which both genetic and environmental factors are important. There is some evidence of a local effect with greater differences in tooth dimension adjacent to the site of the supernumeraries.

An image analysis system for the determination of tooth dimensions from study casts: comparison with manual measurements of mesio-distal diameter.

A first comparison of an image analysis method with classical hand measurement was made using the mesio-distal diameter data derived by the simplest image analysis method, the jawview mode. Fifty casts of male Hong Kong Chinese dental students, mean age 20.4 years, were examined by both methods. The two techniques gave comparable overall results, the correlation coefficients generally being greater than 0.9. A combination of the buccal and occlusal image analysis views gave the best correlation with hand measurement with a comparable variability for different tooth types. For certain teeth, particularly posteriors, reproducibility was better using hand measurement. Optimal weighting of the data from these two different image analysis views can give an "estimated hand measurement" value. Further development of the method to deal with differing orientations of teeth is possible.

Detection of a novel mutation in X-linked amelogenesis imperfecta.

Amelogenesis imperfecta (AI) is a heterogeneous group of inherited disorders of defective enamel formation. The major protein involved in enamel formation, amelogenin, is encoded by a gene located at Xp22.1-Xp22.3. This study investigated the molecular defect producing a combined phenotype of hypoplasia and hypomineralization in a family with the clinical features and inheritance pattern of X-linked amelogenesis imperfecta (XAI). Genomic DNA was prepared from buccal cells sampled from family members. The DNA was subjected to the polymerase chain-reaction (PCR) in the presence of a series of oligonucleotide primers designed to amplify all 7 exons of the amelogenin gene. Cloning and sequencing of the purified amplification products identified a cytosine deletion in exon VI at codon 119. The deletion resulted in a frameshift mutation, introducing a premature stop signal at codon 126, producing a truncated protein lacking the terminal 18 amino acids. Identifying mutations assists our understanding of the important functional domains within the gene, and finding another novel mutation emphasizes the need for family-specific diagnosis of amelogenesis imperfecta.

Small primary tooth-crown size in low birthweight children.

As part of a longitudinal study of dental development in a group of low birthweight children (LBW), study models of 72 children at age 7 years were measured to determine the tooth-crown size of primary molars and canines and to compare the findings with equivalent measurements in 60 normal birthweight (NBW) controls. Mesiodistal (length) and buccolingual (width) dimensions were measured manually, using dial calipers. Primary canines and molars were smaller in the LBW than the controls, with significance values ranging from P < 0.001 for the mesiodistal dimension of maxillary and mandibular canine (> 4% difference) to a non-significant difference P < 0.2 for the buccolingual dimension mandibular first primary molar (1.8% difference). Within the LBW group there was a positive correlation between birthweight and mesiodistal tooth size. Small primary tooth size in LBW children may be influenced by both genetic and environmental factors. The shorter prenatal growth period and poor perinatal and early postnatal development may influence the developing deciduous dentition. Small primary tooth-crown size, associated with LBW, should be considered in all population studies of tooth size.

A unifying aetiological explanation for anomalies of human tooth number and size.

Genetic and environmental factors are implicated in the aetiology of supernumerary teeth, hypodontia, megadontia and microdontia ; these anomalies tend to be associated. 1115 school children aged 11-14 years examined clinically and radiographically provided prevalence data. A further 703 children with dental anomalies were studied. 153 of these became probands for a family study and 327 of their first-degree relatives were examined. There were much higher frequencies (p less than 0.001) of all anomalies among the relatives of probands than in the general population. Males more often had supernumerary teeth and megadontia and females more frequently had hypodontia (p less than 0.05) and microdontia . For hypodontia, the proportion of relatives affected varied with the severity of the condition in the proband (p less than 0.05). In the prevalence study, there was an association between hypodontia and microdontia (p less than 0.001). These findings may be explained by a multifactorial model having a continuous scale, related to tooth number and size, with thresholds. Position on the scale usually depends upon the combination of numerous genetic and environmental factors, each with a small effect, but occasionally a chromosomal anomaly, a major single gene or a major environmental insult may have a large effect. The finding that the estimated difference between the means of the sexes was the same for each anomaly, within the limits of experimental error, supports the validity of the model.

Planar Procrustes analysis of tooth shape.

Accurate quantification of variation in tooth shape is important in studies of dental development, which typically have involved measuring distances between subjectively identified landmarks, key points of correspondence on teeth. An established statistical framework now exists for the analysis of shape when objects are represented as configurations of landmark coordinates; allowing work with the full geometry of objects, which is otherwise lost. This approach was introduced here to the study of tooth morphology, demonstrating how after optimally matching shapes to account for the unwanted effects of location, scale and rotation, most standard descriptive and inferential statistical techniques can be adapted and applied successfully. The techniques are illustrated using a sample of buccal-surface images of central incisors from patients with hypodontia; a significant difference is found in mean buccal-surface shape (Hotelling's two-sample T(2)-test; P=0.004) when compared to a corresponding control group. Successful implementation of these methods depends on the accuracy and reliability with which the landmarks are collected; issues and problems to be addressed are discussed.

Impact of landmark reliability on the planar Procrustes analysis of tooth shape.

In a recent study, the ideas of Procrustes analysis were introduced to the study of tooth shape for teeth represented as configurations of 'landmarks' from digital images. This study aimed to establish how well the method could be expected to perform (in its standard form) when used on surfaces from a variety of tooth types and, in particular, how much impact inconsistencies in the positioning of landmarks would have on investigations of shape. Using four different operators' images and landmarks from 10 different surfaces from each of 20 patients, the consequences of location inconsistency are evaluated by calculating its effect on the recorded variation in Procrustes fits, obtained for each set of multiple representations. The proportion of variation in shape attributable to actual differences between patients, rather than other sources of error, ranged from only 36 to 65% for the five buccal-surfaces considered and was no more than 30% for any of the five occlusal surfaces. Further examination of these results indicated that consistent orientation differences before imaging might be a particular source of error in obtaining any occlusal-landmark data, as might location ambiguities around the edges of the teeth. Orientation effects were also suggested for the buccal-surfaces of the molar teeth. In contrast, the relatively flatter buccal-surfaces of the incisors and canines produced the most reliable data. Methods of analysis need to accommodate these problems if landmark data are to be used to describe variations in tooth shape. Different surfaces each present their own particular difficulties and so a variety of solutions may be required.

Selection of oral microbial adhesion antagonists using biotinylated Streptococcus sanguis and a human mixed oral microflora.

A microtitre assay has been developed using hydroxyapatite-coated wells and Streptococcus sanguis NCTC 10904 at 10(7) cells per ml. A number of models representing toothpaste and mouthwash usage were adopted to detect the anti-adherent efficacy of a polyvinylmethylether maleic acid copolymer (PVM/MA), polyoxypropylene/polyoxyethylene block copolymer (PO/EO), two casein-derived peptides and selected silicones. The results not only confirmed the anti-adherence property of the selected components but also indicated possible molecular interactions leading to the observed performance. To account for the diversity of oral microbial cells in vivo, a further testing system was developed. This involved submerging a hydroxyapatite disc in a mixed culture of human salivary microbial cells, and exposing it to different treatments using the active component either in an aqueous dispersion or in a toothpaste. The effect of toothpastes containing PO/EO, dimethicone copoyol or PVM/MA was investigated over a 4-h incubation with microflora. These tests showed that in a toothpaste formulation the anti-adherent efficacy may be reduced when compared with an aqueous dispersion containing the same or nearly the same concentration of the active component.

Variables and criteria in prevalence studies of dental anomalies of number, form and size.

Prevalence studies of dental anomalies of number, form and size have varied greatly in their findings. The purpose of this paper is to demonstrate from published studies the effect of variables in sampling techniques and examination methods and to suggest diagnostic criteria. In sampling the ethnic background, the sex distribution, age and derivation of the group studied are shown to be important, but the consumption of near optimum concentrations of fluoride in drinking water does not appear to influence findings. For the examination, a dental history is important and full radiographic coverage essential. Findings should be recorded separately for each dentition, while these anomalies should be studied as a group rather than singly. Diagnostic criteria are proposed for supernumerary teeth, hypodontia, invaginated teeth, double teeth, megadontia and microdontia.

Oral hygiene instruction and motivation in children using manual and electric toothbrushes.

The effect of individual chairside instruction and motivation on children using either manual or electric toothbrushes was investigated. From 123 children aged 9-15 years attending the Children's Department, Eastman Dental Hospital, four groups were constructed. Group 1 acted as the control, Groups 2 and 3 used manual toothbrushes and received instruction and motivation, and Group 4 used electric toothbrushes (Touch Tronic, Teledyne Aqua Tec) and also received instruction and motivation. For all children, modified Löe and Silness' Gingival and Plaque Indices were scored, a disclosing agent applied and a prophylaxis completed. Children in Groups 2, 3 and 4 were additionally shown the disclosed plaque, and its importance was discussed. Their attempts to "get the stain off" were checked and their own brushing techniques modified. Re-examinations took place after 1 and 3 months. To estimate the reliability of the diagnosis, 172 of the 344 examinations were repeated by a second operator. The overall coefficient of correlation (between operators) was 0.8. In the control group no detectable improvement in the gingival health or oral cleanliness occurred over the 3-month study period. However, both gingival and plaque scores decreased significantly, by 35-50%, in all instructed and motivated groups within 1 month and this improvement was still observable 2 months later. There were no significant differences in improvement between motivated children using manual or electric toothbrushes.