Theoretical and Experimental Investigation of Autoxidation Propensity of Selected Drugs in Solution State.

The C-H bond dissociation energy (BDE) of drug molecules is often used to estimate their relative propensities to undergo autoxidation. BDE calculations based on electronic structures provide a convenient means to estimate the risk for a given compound to degrade via autoxidation. This study aimed to verify the utility of calculated C-H BDEs of a range of drug molecules in predicting their autoxidation propensities, in the solution state. For the autoxidation study, 2,2'-azobis (2-methylpropionitrile) was employed as the solution state stressor, and the experimental reaction rate constants were determined employing ultraperformance liquid chromatographic (UPLC) methods. Reaction rates in the solution state were compared to the calculated C-H BDE values of the respective compounds. The results indicated a poor correlation for compounds in the solution state, and their relative stabilities could not be explained with C-H BDE. On the other hand, a favorable relationship was observed between the relative extent of ionization and the autoxidation rates of the selected compounds. In the solution state, factors such as the type and extent of drug ionization, degree and type of solvation have been shown to contribute to differences in reactivity. By applying the computational method involving the effect of H-atom abstraction and potential ionization sites in the molecule, the calculated C-H BDE should relate better to the experimental autoxidation rates.

Forced Solid-State Oxidation Studies of Nifedipine-PVP Amorphous Solid Dispersion.

In the present study, the oxidative degradation behavior of nifedipine (NIF) in amorphous solid dispersions (ASDs) prepared with poly(vinyl pyrrolidone) (PVP) with a short (K30) and a long (K90) chain length was investigated. The ASDs were prepared via dry ball-milling and analyzed using Fourier transform infrared (IR) spectroscopy, X-ray scattering, and differential scanning calorimetry. The ASDs were exposed to accelerated thermal-oxidative conditions using a pressurized oxygen headspace (120 °C for 1 day) and high temperatures at atmospheric pressure (60-120 °C for a period of 42 days). Additionally, solution-state oxidative degradation studies showed that pure NIF degrades to a greater extent than in the presence of PVP. Electronic structure calculations were performed to understand the impact of drug-polymer intermolecular interactions on the autoxidation of drugs. While no drug degradation was observed in freshly prepared ASD samples, alkyl free radicals were detected via electron paramagnetic resonance (EPR) spectroscopy. The free radicals were found to be consumed to a greater extent by PVP K30- than PVP K90-based ASDs upon exposure to high oxygen pressures. This was consistent with the greater solid-state oxidative degradation of NIF observed in ASDs with PVP K30 than with PVP K90. As no drug recrystallization occurred during this study period, the lower glass-transition temperature and presumed greater molecular mobility of PVP K30 and its ASD as compared to the PVP K90 system appear to contribute to the greater drug degradation in PVP-K30-based ASDs. The extent and the rate of oxidative degradation were higher in the case of PVP-K30-based ASD as compared to that in PVP-K90-based ASD, and the overall degradation increased with an increase in temperature. IR spectral analysis of drug-polymer interactions supports the electronic calculations of the oxidation process. We infer that, apart from the initial free radical content, the difference in the extent of drug-polymer intermolecular interactions in ASDs and amorphous stabilization during the forced oxidation experiments contribute to the observed differences in the autoxidative reactivity of the drug in ASDs with different PVP chain lengths. Overall, the chemical degradation of NIF in ASDs with two PVP chain lengths obtained from accelerated solid-state oxidation studies was in qualitative agreement with that obtained from long-term (3 years) storage under ambient conditions. The study highlights the ability of accelerated processes to determine the oxidative degradation behavior of polymeric ASDs and suggests that the polymer chain length could factor into chemical as well as physical stability considerations.

Drug-Excipient Interactions in the Solid State: The Role of Different Stress Factors.

Understanding properties and mechanisms that govern drug degradation in the solid state is of high importance to ensure drug stability and safety of solid dosage forms. In this study, we attempt to understand drug-excipient interactions in the solid state using both theoretical and experimental approaches. The model active pharmaceutical ingredients (APIs) under study are carvedilol (CAR) and codeine phosphate (COP), which are known to undergo esterification with citric acid (CA) in the solid state. Starting from the crystal structures of two different polymorphs of each compound, we calculated the exposure and accessibility of reactive hydroxyl groups for a number of relevant crystal surfaces, as well as descriptors that could be associated with surface stabilities using molecular simulations. Accelerated degradation experiments at elevated temperature and controlled humidity were conducted to assess the propensity of different solid forms of the model APIs to undergo chemical reactions with anhydrous CA or CA monohydrate. In addition, for CAR, we studied the solid state degradation at varying humidity levels and also under mechano-activation. Regarding the relative degradation propensities, we found that variations in the exposure and accessibility of molecules on the crystal surface play a minor role compared to the impact of molecular mobility due to different levels of moisture. We further studied drug-excipient interactions under mechano-activation (comilling of API and CA) and found that the reaction proceeded even faster than in physical powder mixtures kept at accelerated storage conditions.

Dynamic mechanism of proton transfer in mannitol 2-dehydrogenase from Pseudomonas fluorescens: mobile GLU292 controls proton relay through a water channel that connects the active site with bulk solvent.

The active site of mannitol 2-dehydrogenase from Pseudomonas fluorescens (PfM2DH) is connected with bulk solvent through a narrow protein channel that shows structural resemblance to proton channels utilized by redox-driven proton pumps. A key element of the PfM2DH channel is the "mobile" Glu(292), which was seen crystallographically to adopt distinct positions up and down the channel. It was suggested that the "down → up" conformational change of Glu(292) could play a proton relay function in enzymatic catalysis, through direct proton shuttling by the Glu or because the channel is opened for water molecules forming a chain along which the protons flow. We report evidence from site-directed mutagenesis (Glu(292) → Ala) substantiated by data from molecular dynamics simulations that support a role for Glu(292) as a gate in a water chain (von Grotthuss-type) mechanism of proton translocation. Occupancy of the up and down position of Glu(292) is influenced by the bonding and charge state of the catalytic acid base Lys(295), suggesting that channel opening/closing motions of the Glu are synchronized to the reaction progress. Removal of gatekeeper control in the E292A mutant resulted in a selective, up to 120-fold slowing down of microscopic steps immediately preceding catalytic oxidation of mannitol, consistent with the notion that formation of the productive enzyme-NAD(+)-mannitol complex is promoted by a corresponding position change of Glu(292), which at physiological pH is associated with obligatory deprotonation of Lys(295) to solvent. These results underscore the important role of conformational dynamics in the proton transfer steps of alcohol dehydrogenase catalysis.

Structure and mechanism of human UDP-xylose synthase: evidence for a promoting role of sugar ring distortion in a three-step catalytic conversion of UDP-glucuronic acid.

UDP-xylose synthase (UXS) catalyzes decarboxylation of UDP-D-glucuronic acid to UDP-xylose. In mammals, UDP-xylose serves to initiate glycosaminoglycan synthesis on the protein core of extracellular matrix proteoglycans. Lack of UXS activity leads to a defective extracellular matrix, resulting in strong interference with cell signaling pathways. We present comprehensive structural and mechanistic characterization of the human form of UXS. The 1.26-Å crystal structure of the enzyme bound with NAD(+) and UDP reveals a homodimeric short-chain dehydrogenase/reductase (SDR), belonging to the NDP-sugar epimerases/dehydratases subclass. We show that enzymatic reaction proceeds in three chemical steps via UDP-4-keto-D-glucuronic acid and UDP-4-keto-pentose intermediates. Molecular dynamics simulations reveal that the D-glucuronyl ring accommodated by UXS features a marked (4)C(1) chair to B(O,3) boat distortion that facilitates catalysis in two different ways. It promotes oxidation at C(4) (step 1) by aligning the enzymatic base Tyr(147) with the reactive substrate hydroxyl and it brings the carboxylate group at C(5) into an almost fully axial position, ideal for decarboxylation of UDP-4-keto-D-glucuronic acid in the second chemical step. The protonated side chain of Tyr(147) stabilizes the enolate of decarboxylated C(4) keto species ((2)H(1) half-chair) that is then protonated from the Si face at C(5), involving water coordinated by Glu(120). Arg(277), which is positioned by a salt-link interaction with Glu(120), closes up the catalytic site and prevents release of the UDP-4-keto-pentose and NADH intermediates. Hydrogenation of the C(4) keto group by NADH, assisted by Tyr(147) as catalytic proton donor, yields UDP-xylose adopting the relaxed (4)C(1) chair conformation (step 3).

Role of Crystal Disorder and Mechanoactivation in Solid-State Stability of Pharmaceuticals.

Common energy-intensive processes applied in oral solid dosage development, such as milling, sieving, blending, compaction, etc. generate particles with surface and bulk crystal disorder. An intriguing aspect of the generated crystal disorder is its evolution and repercussion on the physical- and chemical stabilities of drugs. In this review, we firstly examine the existing literature on crystal disorder and its implications on solid-state stability of pharmaceuticals. Secondly, we discuss the key aspects related to the generation and evolution of crystal disorder, dynamics of the disordered/amorphous phase, analytical techniques to measure/quantify them, and approaches to model the disordering propensity from first principles. The main objective of this compilation is to provide special impetus to predict or model the chemical degradation(s) resulting from processing-induced manifestation in bulk solid manufacturing. Finally, a generic workflow is proposed that can be useful to investigate the relevance of crystal disorder on the degradation of pharmaceuticals during stability studies. The present review will cater to the requirements for developing physically- and chemically stable drugs, thereby enabling early and rational decision-making during candidate screening and in assessing degradation risks associated with formulations and processing.

Computer aided drug design in the development of proteolysis targeting chimeras.

Proteolysis targeting chimeras represent a class of drug molecules with a number of attractive properties, most notably a potential to work for targets that, so far, have been in-accessible for conventional small molecule inhibitors. Due to their different mechanism of action, and physico-chemical properties, many of the methods that have been designed and applied for computer aided design of traditional small molecule drugs are not applicable for proteolysis targeting chimeras. Here we review recent developments in this field focusing on three aspects: de-novo linker-design, estimation of absorption for beyond-rule-of-5 compounds, and the generation and ranking of ternary complex structures. In spite of this field still being young, we find that a good number of models and algorithms are available, with the potential to assist the design of such compounds in-silico, and accelerate applied pharmaceutical research.

Data-Driven Prediction of the Formation of Co-Amorphous Systems.

Co-amorphous systems (COAMS) have raised increasing interest in the pharmaceutical industry, since they combine the increased solubility and/or faster dissolution of amorphous forms with the stability of crystalline forms. However, the choice of the co-former is critical for the formation of a COAMS. While some models exist to predict the potential formation of COAMS, they often focus on a limited group of compounds. Here, four classes of combinations of an active pharmaceutical ingredient (API) with (1) another API, (2) an amino acid, (3) an organic acid, or (4) another substance were considered. A model using gradient boosting methods was developed to predict the successful formation of COAMS for all four classes. The model was tested on data not seen during training and predicted 15 out of 19 examples correctly. In addition, the model was used to screen for new COAMS in binary systems of two APIs for inhalation therapy, as diseases such as tuberculosis, asthma, and COPD usually require complex multidrug-therapy. Three of these new API-API combinations were selected for experimental testing and co-processed via milling. The experiments confirmed the predictions of the model in all three cases. This data-driven model will facilitate and expedite the screening phase for new binary COAMS.

Screening Autoxidation Propensities of Drugs in the Solid-State Using PVP and in the Solution State Using N-Methyl Pyrrolidone.

Oxidative degradation of drugs is one of the major routes of drug substance and drug product instability. Among the diverse routes of oxidation, autoxidation is considered to be challenging to predict and control, potentially due to the multi-step mechanism involving free radicals. C-H bond dissociation energy (C-H BDE) is evidenced to be a calculated descriptor shown to predict drug autoxidation. While computational predictions for the autoxidation propensity of drugs are both swift and possible, no literature to date has highlighted the relationship between the computed C-H BDE and the experimentally-derived autoxidation propensities of solid drugs. The objective of this study is to investigate this missing relationship. The present work is an extension to the previously reported novel autoxidation approach that involves subjecting a physical mixture of pre-milled polyvinyl pyrrolidone (PVP) K-60 and a crystalline drug under high temperature and pressurized oxygen setup. The drug degradation was measured using chromatographic methods. An improved trend between the extent of solid autoxidation and C-H BDE could be observed after normalizing the effective surface area of drugs in the crystalline state, pointing to a positive relationship. Additional studies were conducted by dissolving the drug in N-methyl pyrrolidone (NMP) and exposing the solution under a pressurized oxygen setup at diverse elevated temperatures. Chromatographic results of these samples indicated a similarity in the formed degradation products to the solid-state experiments pointing to the utility of NMP, a PVP monomer surrogate, as a stressing agent for faster and relevant autoxidation screening of drugs in formulations.

Assessment of Diverse Solid-State Accelerated Autoxidation Methods for Droperidol.

The present study aimed to investigate methods for accelerating autoxidation of crystalline drugs in the solid-state that can potentially predict real-time stability. Solid droperidol (DPD) was selected as the model drug. A common free-radical initiator, 2,2'-azobisisobutyronitrile (AIBN), was used to induce autoxidation in solutions. AIBN decomposes at elevated temperatures to yield carbon-centred cyano-isopropyl free radicals that can auto-oxidize neighboring drug molecules. Although the reaction of AIBN is relatively straightforward in solution, it is less so in solids. In this study, we used solid AIBN mixed with DPD powder in the presence and absence of pressurized oxygen headspace. Samples were prepared directly in the form of binary mixtures with DPD and additionally in the form of powder compact/pellet with DPD. The main challenge in carrying out the reaction was related to the preservation of AIBN at elevated temperatures due to the disintegration of the pellet containing the latter. A commercially available free-radical coated silica particle (i.e., 2,2,6,6-tetramethyl-1-piperinyloxy (TEMPO) or (SiliaCATTM TEMPO)) was tested as a potential stressor, but with limited success to induce autoxidation. The most valuable results were obtained when a physical mixture of pre-milled PVP K-60 containing free radicals and DPD was exposed to elevated oxygen-temperature conditions, which yielded significant degradation of DPD. The study highlights the practical challenges for conducting accelerated solid-state stress studies to assess the autoxidation susceptibility of drugs using traditional free-radical initiators and presents a proof of application of milled PVP with free-radical as a potential alternative.

Solid-State Reactivity of Mechano-Activated Simvastatin: Atypical Relation to Powder Crystallinity.

The present study investigated the impact of solid-state disorders generated during milling on the chemical reactivity of simvastatin. An amorphous and a partially crystalline simvastatin powders were generated via cryomilling simvastatin crystals for either 90 or 10 min, respectively. The thoroughly characterized milled powders were stored at 40°C/75% RH, in open and closed containers. The effect of milling and storage conditions on physical stability was investigated using simultaneous small and wide-angle X-ray scattering and differential scanning calorimetry. The chemical degradation was evaluated using liquid chromatography-mass spectrometry. Compared with the fully amorphous state, the partially crystalline simvastatin crystallized to a lower extent in the expense of higher chemical degradation on open storage. The closely stored samples degraded to a lower extent and crystallized to a higher extent than the openly stored ones. However, the trends of the total crystallinity and degradation between amorphous and partially crystalline powders were similar. Small-angle X-ray scattering revealed that the partially crystalline simvastatin comprised a higher extent of nanoscale density heterogeneity than the fully amorphous powder. The overall results pointed toward the role of the remaining amorphous content and the nanoscale and mesoscale density heterogeneity on the chemical reactivity in the disordered simvastatin.

5-tert-butyl-N-pyrazol-4-yl-4,5,6,7-tetrahydrobenzo[d]isoxazole-3-carboxamide derivatives as novel potent inhibitors of Mycobacterium tuberculosis pantothenate synthetase: initiating a quest for new antitubercular drugs.

Pantothenate synthetase (PS) is one of the potential new antimicrobial targets that may also be useful for the treatment of the nonreplicating persistent forms of Mycobacterium tuberculosis. In this Letter we present a series of 5- tert-butyl- N-pyrazol-4-yl-4,5,6,7-tetrahydrobenzo[ d]isoxazole-3-carboxamide derivatives as novel potent Mycobacterium tuberculosis PS inhibitors, their in silico molecular design, synthesis, and inhibitory activity.

Relative Contributions of Solubility and Mobility to the Stability of Amorphous Solid Dispersions of Poorly Soluble Drugs: A Molecular Dynamics Simulation Study.

Amorphous solid dispersions are considered a promising formulation strategy for the oral delivery of poorly soluble drugs. The limiting factor for the applicability of this approach is the physical (in)stability of the amorphous phase in solid samples. Minimizing the risk of reduced shelf life for a new drug by establishing a suitable excipient/polymer-type from first principles would be desirable to accelerate formulation development. Here, we perform Molecular Dynamics simulations to determine properties of blends of eight different polymer⁻small molecule drug combinations for which stability data are available from a consistent set of literature data. We calculate thermodynamic factors (mixing energies) as well as mobilities (diffusion rates and roto-vibrational fluctuations). We find that either of the two factors, mobility and energetics, can determine the relative stability of the amorphous form for a given drug. Which factor is rate limiting depends on physico-chemical properties of the drug and the excipients/polymers. The methods outlined here can be readily employed for an in silico pre-screening of different excipients for a given drug to establish a qualitative ranking of the expected relative stabilities, thereby accelerating and streamlining formulation development.

Conformational flexibility related to enzyme activity: evidence for a dynamic active-site gatekeeper function of Tyr(215) in Aerococcus viridans lactate oxidase.

L-Lactate oxidase (LOX) belongs to a large family of flavoenzymes that catalyze oxidation of α-hydroxy acids. How in these enzymes the protein structure controls reactivity presents an important but elusive problem. LOX contains a prominent tyrosine in the substrate binding pocket (Tyr(215) in Aerococcus viridans LOX) that is partially responsible for securing a flexible loop which sequesters the active site. To characterize the role of Tyr(215), effects of substitutions of the tyrosine (Y215F, Y215H) were analyzed kinetically, crystallographically and by molecular dynamics simulations. Enzyme variants showed slowed flavin reduction and oxidation by up to 33-fold. Pyruvate release was also decelerated and in Y215F, it was the slowest step overall. A 2.6-Å crystal structure of Y215F in complex with pyruvate shows the hydrogen bond between the phenolic hydroxyl and the keto oxygen in pyruvate is replaced with a potentially stronger hydrophobic interaction between the phenylalanine and the methyl group of pyruvate. Residues 200 through 215 or 216 appear to be disordered in two of the eight monomers in the asymmetric unit suggesting that they function as a lid controlling substrate entry and product exit from the active site. Substitutions of Tyr(215) can thus lead to a kinetic bottleneck in product release.

Retention-time prediction for polycyclic aromatic compounds in reversed-phase capillary electro-chromatography.

Log Po/w based models are often used for the retention time prediction of reversed phase liquid chromatography. Here, we present the investigation of the applicability of log Po/w based retention time predictions for the separation in capillary electro-chromatography (CEC). A test set of five polycyclic aromatic hydrocarbons was separated using two different stationary phases with three different mobile phases each. The resulting retention times were correlated with the experimental log Po/w values as well as with calculated log Po/w values. The used methods include quantitative structure property relationship (QSPR) models as well as molecular dynamic methods such as the linear interaction energy (LIE) or the Bennett acceptance ratio (BAR). The results indicate that rigorous simulation models are capable of accurately reproducing experimental results and that the electrophoretic mobility of analytes in CEC separations leads to significant deviations in the retention time prediction.

Investigation of migrant-polymer interaction in pharmaceutical packaging material using the linear interaction energy algorithm.

The interaction between drug products and polymeric packaging materials is an important topic in the pharmaceutical industry and often associated with high costs because of the required elaborative interaction studies. Therefore, a theoretical prediction of such interactions would be beneficial. Often, material parameters such as the octanol water partition coefficient are used to predict the partitioning of migrant molecules between a solvent and a polymeric packaging material. Here, we present the investigation of the partitioning of various migrant molecules between polymers and solvents using molecular dynamics simulations for the calculation of interaction energies. Our results show that the use of a model for the interaction between the migrant and the polymer at atomistic detail can yield significantly better results when predicting the polymer solvent partitioning than a model based on the octanol water partition coefficient.

Structure based descriptors for the estimation of colloidal interactions and protein aggregation propensities.

The control of protein aggregation is an important requirement in the development of bio-pharmaceutical formulations. Here a simple protein model is proposed that was used in molecular dynamics simulations to obtain a quantitative assessment of the relative contributions of proteins' net-charges, dipole-moments, and the size of hydrophobic or charged surface patches to their colloidal interactions. The results demonstrate that the strength of these interactions correlate with net-charge and dipole moment. Variation of both these descriptors within ranges typical for globular proteins have a comparable effect. By comparison no clear trends can be observed upon varying the size of hydrophobic or charged patches while keeping the other parameters constant. The results are discussed in the context of experimental literature data on protein aggregation. They provide a clear guide line for the development of improved algorithms for the prediction of aggregation propensities.

Photoreactive "nanorulers" detect a novel conformation of full length HDAC3-SMRT complex in solution.

Histone deacetylase 3 (HDAC3) is a promising epigenetic drug target for multiple therapeutic applications. Direct interaction between the Deacetylase Activating Domain of the silencing mediator for retinoid or thyroid-hormone receptors (SMRT-DAD) is required for activation of enzymatic activity of HDAC3. The structure of this complex and the nature of interactions with HDAC inhibitors in solution are unknown. Using novel photoreactive HDAC probes, "nanorulers", we determined the distance between the catalytic site of the full-length HDAC3 and SMRT-DAD in solution at physiologically relevant conditions and found it to be substantially different from that predicted by the X-ray model with a Δ379-428 aa truncated HDAC3. Further experiments indicated that in solution this distance might change in response to chemical stimuli, while the enzymatic activity remained unaffected. These observations were further validated by Saturation Transfer Difference (STD) NMR experiments. We propose that the observed changes in the distance are an important part of the histone code that remains to be explored. Mapping direct interactions and distances between macromolecules with such "nanorulers" as a function of cellular events facilitates better understanding of basic biology and ways for its manipulation in a cell- and tissue-specific manner.

Design, synthesis, and optimization of novel epoxide incorporating peptidomimetics as selective calpain inhibitors.

Hyperactivation of the calcium-dependent cysteine protease calpain 1 (Cal1) is implicated as a primary or secondary pathological event in a wide range of illnesses and in neurodegenerative states, including Alzheimer's disease (AD). E-64 is an epoxide-containing natural product identified as a potent nonselective, calpain inhibitor, with demonstrated efficacy in animal models of AD. By use of E-64 as a lead, three successive generations of calpain inhibitors were developed using computationally assisted design to increase selectivity for Cal1. First generation analogues were potent inhibitors, effecting covalent modification of recombinant Cal1 catalytic domain (Cal1cat), demonstrated using LC-MS/MS. Refinement yielded second generation inhibitors with improved selectivity. Further library expansion and ligand refinement gave three Cal1 inhibitors, one of which was designed as an activity-based protein profiling probe. These were determined to be irreversible and selective inhibitors by kinetics studies comparing full length Cal1 with the general cysteine protease papain.

Insights from comprehensive multiple receptor docking to HDAC8.

A systematic investigation of the available crystal structures of HDAC8 and of the influence of different receptor structures and docking protocols is presented. The study shows that the open conformation of HDAC8 may be preferred by ligands with flexible surface binding groups, as such a conformation allows the ligands to minimize their exposure to solvent upon binding. This observation allowed us to rationalize the excellent potency of pyrazole-based inhibitors compared to that of isoxazole-based inhibitors.