RESUMEN
The hydrogenation of CO2 holds promise for transforming the production of renewable fuels and chemicals. However, the challenge lies in developing robust and selective catalysts for this process. Transition metal oxide catalysts, particularly cobalt oxide, have shown potential for CO2 hydrogenation, with performance heavily reliant on crystal phase and morphology. Achieving precise control over these catalyst attributes through colloidal nanoparticle synthesis could pave the way for catalyst and process advancement. Yet, navigating the complexities of colloidal nanoparticle syntheses, governed by numerous input variables, poses a significant challenge in systematically controlling resultant catalyst features. We present a multivariate Bayesian optimization, coupled with a data-driven classifier, to map the synthetic design space for colloidal CoO nanoparticles and simultaneously optimize them for multiple catalytically relevant features within a target crystalline phase. The optimized experimental conditions yielded small, phase-pure rock salt CoO nanoparticles of uniform size and shape. These optimized nanoparticles were then supported on SiO2 and assessed for thermocatalytic CO2 hydrogenation against larger, polydisperse CoO nanoparticles on SiO2 and a conventionally prepared catalyst. The optimized CoO/SiO2 catalyst consistently exhibited higher activity and CH4 selectivity (ca. 98%) across various pretreatment reduction temperatures as compared to the other catalysts. This remarkable performance was attributed to particle stability and consistent H* surface coverage, even after undergoing the highest temperature reduction, achieving a more stable catalytic species that resists sintering and carbon occlusion.
RESUMEN
Copper selenides are an important family of materials with applications in catalysis, plasmonics, photovoltaics, and thermoelectrics. Despite being a binary material system, the Cu-Se phase diagram is complex and contains multiple crystal structures in addition to several metastable structures that are not found on the thermodynamic phase diagram. Consequently, the ability to synthetically navigate this complex phase space poses a significant challenge. We demonstrate that data-driven learning can successfully map this phase space in a minimal number of experiments. We combine soft chemistry (chimie douce) synthetic methods with multivariate analyses via classification techniques to enable predictive phase determination. A surrogate model was constructed with experimental data derived from a design matrix of four experimental variables: C-Se bond strength of the selenium precursor, time, temperature, and solvent composition. The reactions in the surrogate model resulted in 11 distinct phase combinations of copper selenide. These data were used to train a classification model that predicts the phase with 95.7% accuracy. The resulting decision tree enabled conclusions to be drawn about how the experimental variables affect the phase and provided prescriptive synthetic conditions for specific phase isolation. This guided the accelerated phase targeting in a minimum number of experiments of klockmannite CuSe, which could not be isolated in any of the reactions used to construct the surrogate model. The reaction conditions that the model predicted to synthesize klockmannite CuSe were experimentally validated, highlighting the utility of this approach.
RESUMEN
The design of inorganic materials for various applications critically depends on our ability to manipulate their synthesis in a rational, robust, and controllable fashion. Different from the conventional trial-and-error approach, data-driven techniques such as the design of experiments (DoE) and machine learning are an effective and more efficient way to predictably control materials synthesis. Here, we present a Viewpoint on recent progress in leveraging such techniques for predicting and controlling the outcomes of inorganic materials synthesis. We first compare how the design choice (statistical DoE vs machine learning) affects the type of control it can offer over the resulting product attributes, information elucidated, and experimental cost. These attributes are supported by discussing select case studies from the recent literature that highlight the power of these techniques for materials synthesis. The influence of experimental bias is next discussed, followed finally by our perspectives on the major challenges in the widespread implementation of predictable and controllable materials synthesis using data-driven techniques.
RESUMEN
A P162- polyphosphide dianion ink was produced by the reaction of red phosphorus with a binary thiol-amine mixture of ethanethiol (ET) and ethylenediamine (en). The polyphosphide was identified by solution 31P NMR spectroscopy and electrospray ionization mass spectrometry. This solute was compared to the reaction products of white phosphorus (P4) and other elemental pnictides in the same solvent system. The reaction of P4 with ET and en gives the same P162- polyphosphide; however, the easier handling and lower reactivity of red phosphorus highlights the novelty of that reaction. Elemental arsenic and antimony both give mononuclear pnictogen-sulfide-thiolate complexes upon reaction with ET and en under otherwise identical conditions, with this difference likely resulting from the greater covalency and tendency of phosphorus to form P-P bonds.
RESUMEN
The power conversion efficiencies of lead halide perovskite thin film solar cells have surged in the short time since their inception. Compounds, such as ionic liquids (ILs), have been explored as chemical additives and interface modifiers in perovskite solar cells, contributing to the rapid increase in cell efficiencies. However, due to the small surface area-to-volume ratio of the large grained polycrystalline halide perovskite films, an atomistic understanding of the interaction between ILs and perovskite surfaces is limited. Here, we use quantum dots (QDs) to study the coordinative surface interaction between phosphonium-based ILs and CsPbBr3. When native oleylammonium oleate ligands are exchanged off the QD surface with the phosphonium cation as well as the IL anion, a threefold increase in photoluminescent quantum yield of as-synthesized QDs is observed. The CsPbBr3 QD structure, shape, and size remain unchanged after ligand exchange, indicating only a surface ligand interaction at approximately equimolar additions of the IL. Increased concentrations of the IL lead to a disadvantageous phase change and a concomitant decrease in photoluminescent quantum yields. Valuable information regarding the coordinative interaction between certain ILs and lead halide perovskites has been elucidated and can be used for informed pairing of beneficial combinations of IL cations and anions.
RESUMEN
ConspectusSince the initial discovery of colloidal lead halide perovskite nanocrystals, there has been significant interest placed on these semiconductors because of their remarkable optoelectronic properties, including very high photoluminescence quantum yields, narrow size- and composition-tunable emission over a wide color gamut, defect tolerance, and suppressed blinking. These material attributes have made them attractive components for next-generation solar cells, light emitting diodes, low-threshold lasers, single photon emitters, and X-ray scintillators. While a great deal of research has gone into the various applications of colloidal lead halide perovskite nanocrystals, comparatively little work has focused on the fundamental surface chemistry of these materials. While the surface chemistry of colloidal semiconductor nanocrystals is generally affected by their particle morphology, surface stoichiometry, and organic ligands that contribute to the first coordination sphere of their surface atoms, these attributes are markedly different in lead halide perovskite nanocrystals because of their ionicity.In this Account, emerging work on the surface chemistry of lead halide perovskite nanocrystals is highlighted, with a particular focus placed on the most-studied composition of CsPbBr3. We begin with an in-depth exploration of the native surface chemistry of as-prepared, 0-D cuboidal CsPbBr3 nanocrystals, including an atomistic description of their surface termini, vacancies, and ionic bonding with ligands. We then proceed to discuss various post-synthetic surface treatments that have been developed to increase the photoluminescence quantum yields and stability of CsPbBr3 nanocrystals, including the use of tetraalkylammonium bromides, metal bromides, zwitterions, and phosphonic acids, and how these various ligands are known to bind to the nanocrystal surface. To underscore the effect of post-synthetic surface treatments on the application of these materials, we focus on lead halide perovskite nanocrystal-based light emitting diodes, and the positive effect of various surface treatments on external quantum efficiencies. We also discuss the current state-of-the-art in the surface chemistry of 1-D nanowires and 2-D nanoplatelets of CsPbBr3, which are more quantum confined than the corresponding cuboidal nanocrystals but also generally possess a higher defect density because of their increased surface area-to-volume ratios.
RESUMEN
Structural polymorphism is known for many bulk materials; however, on the nanoscale metastable polymorphs tend to form more readily than in the bulk, and with more structural variety. One such metastable polymorph observed for colloidal Ag2Se nanocrystals has traditionally been referred to as the "tetragonal" phase. While there are reports on the chemistry and properties of this metastable polymorph, its crystal structure, and therefore electronic structure, has yet to be determined. We report that an anti-PbCl2-like structure type (space group P21/n) more accurately describes the powder X-ray diffraction and X-ray total scattering patterns of colloidal Ag2Se nanocrystals prepared by several different methods. Density functional theory (DFT) calculations indicate that this anti-PbCl2-like Ag2Se polymorph is a dynamically stable, narrow-band-gap semiconductor. The anti-PbCl2-like structure of Ag2Se is a low-lying metastable polymorph at 5-25 meV/atom above the ground state, depending on the exchange-correlation functional used.
RESUMEN
The broad implementation of thermoelectricity requires high-performance and low-cost materials. One possibility is employing surfactant-free solution synthesis to produce nanopowders. We propose the strategy of functionalizing "naked" particles' surface by inorganic molecules to control the nanostructure and, consequently, thermoelectric performance. In particular, we use bismuth thiolates to functionalize surfactant-free SnTe particles' surfaces. Upon thermal processing, bismuth thiolates decomposition renders SnTe-Bi2 S3 nanocomposites with synergistic functions: 1) carrier concentration optimization by Bi doping; 2) Seebeck coefficient enhancement and bipolar effect suppression by energy filtering; and 3) lattice thermal conductivity reduction by small grain domains, grain boundaries and nanostructuration. Overall, the SnTe-Bi2 S3 nanocomposites exhibit peak z T up to 1.3 at 873â K and an average z T of ≈0.6 at 300-873â K, which is among the highest reported for solution-processed SnTe.
RESUMEN
Cu2ZnSnSe4 is a direct band gap semiconductor composed of earth-abundant elements, making it an attractive material for thin-film photovoltaic technologies. Cu2ZnSnSe4 crystallizes in the kesterite structure type as a bulk material, but it can also crystallize in a metastable wurtzite-like crystal structure when synthesized on the nanoscale. The wurtzite-like polymorph introduces unique and useful properties to Cu2ZnSnSe4 materials, including widely tunable band gaps and superior compositional flexibility as compared to kesterite Cu2ZnSnSe4. Here, we investigate the formation pathway of colloidally prepared wurtzite-like Cu2ZnSnSe4 nanocrystals. We show that this quaternary material forms through a chain of reactions, starting with binary Cu3Se2 nanocrystals that, due to both kinetic and thermodynamic reasons, preferentially react with tin to yield hexagonal copper tin selenide intermediates. These ternary intermediates then react with zinc to form the resulting wurtzite-like Cu2ZnSnSe4 nanocrystals. Based on this formation pathway, we suggest synthetic methods that may prevent the formation of unwanted impurity phases that are known to hamper the efficiency of Cu2ZnSnSe4-based optoelectronic devices.
RESUMEN
N-Heterocyclic carbenes (NHCs) are versatile L-type ligands that have been shown to stabilize coinage metal chalcogenide nanocrystals, such as Ag2S, remarkably well. However, very little research has been done on the interaction between NHC ligands and coinage metal chalcogenide nanocrystal surfaces and subsequent ligand exchange reactions. Herein, solution 1H nuclear magnetic resonance methods were used to monitor ligand exchange reactions on stoichiometric Ag2S nanocrystal platforms with various primary amine and carboxylic acid ligands. Despite the introduction of new ligands, the native NHC ligands remain tightly bound to the Ag2S nanocrystal surface and are not displaced at room temperature. Primary amine and carboxylic acid ligands demonstrated quantitative ligand exchange only after the samples had been heated with an excess incoming ligand, which implies a strong NHC-Ag binding energy. Density functional theory affirms that a model NHC ligand binds the strongest to a Ag12S6 cluster surface, followed by amine and carboxylic acid binding; computational analysis is therefore in line with the absence of NHC displacement observed in experiments. Both the bulky sterics of the C14-alkyl chains on the NHC and the high energies for the binding of NHC to the Ag2S surface contribute to the superior colloidal stability over conventional long-chain amine or carboxylic acid ligands (many months vs hours to days).
RESUMEN
There is considerable interest in the exploration of new solar absorbers that are environmentally stable, absorb through the visible, and possess a polar crystal structure. Bournonite CuPbSbS3 is a naturally occurring sulfosalt mineral that crystallizes in the noncentrosymmetric Pmn21 space group and possesses an optimal band gap for single junction solar cells; however, the synthetic literature on this quaternary semiconductor is sparse and it has yet to be deposited and studied as a thin film. Here we describe the ability of a binary thiol-amine solvent mixture to dissolve the bulk bournonite mineral as well as inexpensive bulk CuO, PbO, and Sb2S3 precursors at room temperature and ambient pressure to generate an ink. The synthetic compound ink derived from the dissolution of the bulk binary precursors in the right stoichiometric ratios yields phase-pure thin films of CuPbSbS3 upon solution deposition and annealing. The resulting semiconductor thin films possess a direct optical band gap of 1.24 eV, an absorption coefficient â¼105 cm-1 through the visible, mobilities of 0.01-2.4 cm2 (V·s)-1, and carrier concentrations of 1018 - 1020 cm-3. These favorable optoelectronic properties suggest CuPbSbS3 thin films are excellent candidates for solar absorbers.
RESUMEN
Cesium lead halide perovskite quantum dots (QDs) have gained significant attention as next-generation optoelectronic materials; however, their properties are highly dependent on their surface chemistry. The surfaces of cuboidal CsPbBr3 QDs have been intensively studied by both theoretical and experimental techniques, but fundamental questions still remain about the atomic termination of the QDs. The binding sites and modes of ligands at the surface remain unproven. Herein, we demonstrate that solid-state NMR spectroscopy allows the unambiguous assignment of organic surface ligands via 1H, 13C, and 31P NMR. Surface-selective 133Cs solid-state NMR spectra show the presence of an additional 133Cs NMR signal with a unique chemical shift that is attributed to Cs atoms terminating the surface of the particle and which are likely coordinated by carboxylate ligands. Dipolar dephasing curves that report on the distance between the surface ammonium ligands and Cs and Pb were recorded using double resonance 1H{133Cs} RESPDOR and 1H{207Pb} S-REDOR experiments. Model QD surface slabs with different possible surface terminations were generated from the CsPbBr3 crystal structure, and theoretical dipolar dephasing curves considering all possible 1H-133Cs/207Pb spin pairs were then calculated. Comparison of the calculated and experimental dephasing curves indicates the particles are CsBr terminated (not PbBr2 terminated) with alkylammonium ligands substituting into some surface Cs sites, consistent with the surface-selective 133Cs NMR experiments. These results highlight the utility of high-resolution solid-state NMR spectroscopy for studying ligand binding and the surface structure of nanomaterials.
RESUMEN
Transition metal carbides (TMCs) have demonstrated outstanding potential for utilization in a wide range of catalytic applications because of their inherent multifunctionality and tunable composition. However, the harsh conditions required to prepare these materials have limited the scope of synthetic control over their physical properties. The development of low-temperature, carburization-free routes to prepare TMCs would unlock the versatility of this class of materials, enhance our understanding of their physical properties, and enable their cost-effective production at industrial scales. Here, we report an exceptionally mild and scalable solution-phase synthesis route to phase-pure molybdenum carbide (α-MoC1-x) nanoparticles (NPs) in a continuous flow millifluidic reactor. We exploit the thermolytic decomposition of Mo(CO)6 in the presence of a surface-stabilizing ligand and a high boiling point solvent to yield MoC1-x NPs that are colloidally stable and resistant to bulk oxidation in air. To demonstrate the utility of this synthetic route to prepare catalytically active TMC NPs, we evaluated the thermochemical CO2 hydrogenation performance of α-MoC1-x NPs dispersed on an inert carbon support. The α-MoC1-x/C catalyst exhibited a 2-fold increase in both activity on a per-site basis and selectivity to C2+ products as compared to the bulk α-MoC1-x analogue.
RESUMEN
A series of CdSe quantum dot acceptors possessing six different ligand frameworks (i.e., pivalic acid, pyridine, butylamine, tert-butylthiol, thiophenol, and tetrahydrothiophene) were used as platforms for investigating the influence of quantum dot surface chemistry on the performance of hybrid poly(3-hexythiophene-2,5-diyl) (P3HT):CdSe quantum dot bulk heterojunction (BHJ) solar cells. We confirm that the device parameters used to evaluate solar cell performance are significantly influenced by the nature of the quantum dot surface ligand. The dependence of short circuit current density (JSC) on the CdSe ligand type was probed using ultrafast time-resolved photoluminescence (PL) measurements, and good correlations between the ligand-dependent trends in JSC and excited state lifetime were found, in which the P3HT:CdSe quantum dot BHJs with the shortest PL lifetimes possess the largest device current densities. The frontier energy levels of the quantum dot acceptors are significantly influenced by surface ligands, wherein the device open circuit potentials (VOC) were found to linearly correlate with the energy difference (ΔEDA) between the HOMO of the P3HT donor and the electrochemically determined LUMO of the CdSe quantum dot acceptors over a range of 220 mV. This work demonstrates the versatility of quantum dot ligand engineering for tuning the device parameters and performance of hybrid solar cells.
RESUMEN
Cesium lead halide perovskites are an emerging class of quantum dots (QDs) that have shown promise in a variety of applications; however, their properties are highly dependent on their surface chemistry. To this point, the thermodynamics of ligand binding remain unstudied. Herein, 1 Hâ NMR methods were used to quantify the thermodynamics of ligand exchange on CsPbBr3 QDs. Both oleic acid and oleylamine native ligands dynamically interact with the CsPbBr3 QD surface, having individual surface densities of 1.2-1.7â nm-2 . 10-Undecenoic acid undergoes an exergonic exchange equilibrium with bound oleate (Keq =1.97) at 25 °C while 10-undecenylphosphonic acid undergoes irreversible ligand exchange. Undec-10-en-1-amine exergonically exchanges with oleylamine (Keq =2.52) at 25 °C. Exchange occurs with carboxylic acids, phosphonic acids, and amines on CsPbBr3 QDs without etching of the nanocrystal surface; increases in the steady-state PL intensities correlate with more strongly bound conjugate base ligands.
RESUMEN
With hydrogen fuel becoming a more viable alternative to fossil fuels comes the need for inexpensive, low-energy hydrogen production. Here, a low-temperature direct solution-processing method is presented for the deposition of earth-abundant pyrite-type NiSe2 as an efficient hydrogen evolution reaction (HER) catalyst. Thin films of phase-pure NiSe2 are deposited from a precursor ink prepared by room-temperature dissolution of bulk elemental Ni and Se in a binary thiolamine solvent mixture. The nanostructured NiSe2 thin films demonstrate high HER catalytic activity with 100% Faradaic efficiency.
RESUMEN
N-Heterocyclic carbenes (NHCs) are becoming increasingly popular ligand frameworks for nanocrystal surfaces; however, as of yet the nature of the NHC-nanocrystal interface remains unexplored across different material types. Here we report a facile synthetic route to NHC-stabilized metal and metal chalcogenide nanocrystals. It was observed that NHC-Ag nanocrystals are colloidally stable, but much less so than the corresponding NHC-Ag2E analogues. Comprehensive NMR studies suggest a dynamic NHC-nanocrystal interface for both NHC-Ag and NHC-Ag2S; however, density functional theory calculations reveal a much stronger binding affinity of the NHC ligands to Ag2S compared with Ag nanocrystals, which explains the superior colloidal stability of the metal chalcogenides. This offers new insight into the surface chemistry of neutral L-type carbenes in colloidal nanocrystal chemistry.
RESUMEN
The ability to synthesize colloidal semiconductor nanocrystals in a well-controlled manner (i.e., with fine control over size, shape, size dispersion, and composition) has been mastered over the past 15 years. Much of this success stems from careful studies of precursor conversion and nanocrystal growth with respect to phosphine chalcogenide precursors for the synthesis of metal chalcogenide nanocrystals. Despite the high level of success that has been achieved with phosphine chalcogenides, there has been a longstanding interest in exploring alternate chalcogenide precursors because of issues associated with phosphine chalcogenide cost, purity, toxicity, etc. This has resulted in a large body of literature on the use of sulfur and selenium dissolved in octadecene or amines, thio- and selenoureas, and silyl chalcogenides as alternate chalcogenide precursors for metal chalcogenide nanocrystal synthesis. In this Account, emerging work on the use of diorganyl dichalcogenides (R-E-E-R, where E = S, Se, or Te and R = alkyl, allyl, benzyl, or aryl) as alternate chalcogenide precursors for the synthesis of metal chalcogenide nanocrystals is summarized. Among the benefits of these dichalcogenide synthons are the following: (i) they represent the first and only common precursor type that can function as chalcogen transfer reagents for each of the group VI elements (i.e., to make metal oxide, metal sulfide, metal selenide, and metal telluride nanocrystals); (ii) they possess relatively weak E-E bonds that can be readily cleaved under mild thermolytic or photolytic conditions; and (iii) the organic substituents can be tuned to affect the reactivity. These combined attributes have allowed dichalcogenide precursors to be employed for a wide range of metal chalcogenide nanocrystal syntheses, including those for In2S3, SnxGe1-xSe, SnTe, Cu2-xSySe1-y, ZnSe, CdS, CdSe, MoSe2, WSe2, BiSe, and CuFeS2. Interestingly, a number of metastable phases of compositionally complex semiconductors can be kinetically accessed through syntheses utilizing dichalcogenide precursors, likely as a result of their ability to convert at relatively low temperatures. These include the hexagonal wurtzite phases of CuInS2, CuInSe2, Cu2ZnSn(S1-xSex)4, and Cu2SnSe3 nanocrystals. The discovery of crystal phases on the nanoscale that do not exist in their bulk analogues is a developing area of nanocrystal chemistry, and dichalcogenides are proving to be a useful synthetic tool in this regard. The most recent application of dichalcogenide synthons for semiconductor nanocrystals is their use as precursors for surface ligands. While there is a rich history of using thiol ligands for semiconductor nanocrystals, the analogous selenol and tellurol ligands have not been studied, likely because of their oxidative instability. Dichalcogenides have proven useful in this regard, as they can be reduced in situ with diphenylphosphine to give the corresponding selenol or tellurol ligand that binds to the nanocrystal surface. This chemistry has been applied to the in situ synthesis and ligand binding of selenols to PbSe nanocrystals and both selenols and tellurols to CdSe nanocrystals. These initial studies have allowed the photophysics of these nanocrystal-ligand constructs to be investigated; in both cases, it appears that the selenol and tellurol ligands act as hole traps that quench the photoluminescence of the semiconductor nanocrystals.