RESUMEN
In this study, we report an advanced fabrication technique to develop a miniature focused needle transducer. Two different types of high-frequency (100 MHz) transducers were fabricated using the lead magnesium niobate-lead titanate (PMN-0.3PT) and lithium niobate (LiNbO3) single crystals. In order to enhance the transducer's performance, a unique mass-spring matching layer technique was adopted, in which gold and parylene play the roles of the mass layer and spring layer, respectively. The PMN-0.3PT transducer had a 103 MHz center frequency with a -6 dB bandwidth of 52%, and a signal-to-noise ratio (SNR) of 42 dB. The center frequency, -6 dB bandwidth, and SNR of the LiNbO3 transducer were 105 MHz, 66%, and 44 dB, respectively. In order to compare and evaluate the transducers' performances, an ultrasonic biomicroscopy (UBM) imaging on the fish eye was performed. The results showed that the LiNbO3 transducer had a better contrast resolution compared to the PMN-0.3PT transducer. The fabricated transducer showed an excellent performance with high-resolution corneal epithelium imaging of the experimental fish eye. These interesting findings are useful for the future biomedical implementation of the fabricated transducers in the field of high-resolution ultrasound imaging and diagnosis purpose.
Asunto(s)
Agujas , Transductores , Animales , Diseño de Equipo , Radiografía , Ultrasonografía/métodosRESUMEN
OBJECTIVE: The purpose of this study was to evaluate our novel ultrasound vibro-elastography (UVE) technique for assessing patients with papilledema by non-invasively measuring shear wave speed (SWS), elasticity and viscosity properties of the optic nerve and sclera. METHODS: Shear wave speeds were measured at three frequencies-100, 150 and 200 Hz-on the optic nerve and sclera tissues for assessing patients with papilledema resulting from idiopathic intracranial hypertension (IIH). The method was evaluated in six papilledema patients and six controls on two separate locations for each participant (i.e., optic nerve and posterior sclera). SWSs of the optic nerve and sclera were analyzed by using a 2-D speed map technique within a circular region of interest (ROI) (i.e., the diameter of the ROI was 1.5 mm × 3.0 mm at the optic nerve and sclera, respectively). Elasticity and viscosity were then analyzed using the wave speed dispersion over the three frequencies. RESULTS: We measured values of SWS at both locations, optic nerve and sclera, of the right eye and left eye at three different frequencies in IIH patients and controls. The SWS (mean ± standard deviation [m/s]) of the right eye was significantly higher at the sclera in IIH patients compared with controls (i.e., patients vs. controls: 5.91 ± 0.54 vs. 3.86 ± 0.56, p < 0.0001 at 100 Hz), but there was no significant difference at the optic nerve (i.e., patients vs. controls: 3.62 ± 0.39 vs. 3.36 ± 0.35, p = 0.1100 at 100Hz). We observed increased elasticity (kPa) in IIH patients, indicating there are significant differences in elasticity between patients and controls at the optic nerve and sclera (i.e., right eye [patients vs. controls]: 14.42 ± 6.59 vs. 6.5 ± 5.71, p = 0.0065 [optic nerve]; 33.04 ± 10.62 vs. 9.16 ± 7.15, p < 0.0001 [sclera]). Viscosity was also (Pa·s) higher in the sclera and optic nerve of the left eye (i.e., left eye [patient vs. control]: 8.89 ± 4.37 vs. 7.27 ± 5.01, p = 0.3790 (optic nerve); 16.05 ± 10.79 vs. 8.49 ± 6.09, p < 0.0194 [sclera]). CONCLUSION: This research illustrates the feasibility of using our UVE system to evaluate stiffness of different tissues in the eye non-invasively. It suggests that the viscoelasticity of the posterior sclera is higher than that of the optic nerve. We found that the posterior sclera is stiffer than the optic nerve in patients with papilledema resulting from IIH, making UVE a potential non-invasive technique for assessing papilledema.
Asunto(s)
Papiledema , Seudotumor Cerebral , Humanos , Papiledema/diagnóstico por imagen , Esclerótica/diagnóstico por imagen , Viscosidad , Nervio Óptico/diagnóstico por imagenRESUMEN
In recent years, suitable bioactive materials coated nanoparticles have attracted substantial attention in the field of biomedical applications. The present study emphasizes experimental details for the synthesis of boiling rice starch extract (BRE) coated iron oxide nanoparticles (IONPs) to treat cancer by photoacoustic imaging (PAI)-guided chemo-photothermal therapy. The solvothermal method was used to synthesize IONPs. The physical immobilization method helps to coat BRE-loaded doxorubicin (DOX) molecules on the iron oxide surface. In vitro drug release was estimated in basic (pH 9.0), neutral (pH 7.2), and acidic (pH 4.5) media for varying time periods using ultraviolet-visible spectroscopy. The chemical and physical properties of the synthesized spherical BRE-IONPs were characterized using sophisticated analytical instrumentation. A magnetic saturation experiment was performed with BRE-IONPs for evaluating possible hyperthermia in targeted drug delivery. The biological activity of the synthesized BRE-IONPs was investigated by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay and acridine orange/propidium iodide fluorescence cell viability study. BRE-IONPs showed excellent photothermal stability, with a high photothermal conversion efficiency (η = 29.73%), biocompatible property, and high near-infrared region absorption for PAI-guided PTT treatment. This study will provide a better understanding of rice starch as a suitable bioactive coating material for possible theranostic applications.
Asunto(s)
Antibióticos Antineoplásicos/farmacología , Neoplasias Óseas/terapia , Doxorrubicina/farmacología , Nanopartículas Magnéticas de Óxido de Hierro/química , Oryza , Osteosarcoma/terapia , Técnicas Fotoacústicas , Terapia Fototérmica , Almidón/farmacología , Nanomedicina Teranóstica , Antibióticos Antineoplásicos/química , Neoplasias Óseas/diagnóstico por imagen , Neoplasias Óseas/metabolismo , Línea Celular Tumoral , Preparaciones de Acción Retardada , Doxorrubicina/química , Portadores de Fármacos , Liberación de Fármacos , Humanos , Concentración de Iones de Hidrógeno , Cinética , Oryza/química , Osteosarcoma/diagnóstico por imagen , Osteosarcoma/metabolismo , Almidón/aislamiento & purificaciónRESUMEN
OBJECTIVE: The aim of this study was to monitor the physiological changes and cytotoxic effects of exogenous contrast agents during photoacoustic imaging (PAI) and photothermal therapy (PTT). In this paper, a low-power telemetric device for mouse vital signs monitoring was designed and demonstrated. APPROACH: The power consumption was optimized through hardware and software co-design with a 17% increased operating time compared with typical operation. To demonstrate the feasibility of the monitoring device, PAI and PTT experiments with chitosan-polypyrrole nanocomposites (CS-PPy NCs) as exogenous contrast agents were conducted. Herein, the physiological variation in groups of mice with different CS-PPy NC concentrations was observed and analyzed. MAIN RESULTS: The experimental results indicated the influence of CS-PPy NCs and anesthesia on mouse vital signs in PAI and PTT. Additionally, the association between core temperature, heart rate, and saturation of peripheral oxygen (SpO2) during PAI and PTT was shown. The strong near-infrared absorbance of exogenous contrast agents could account for the increase in mouse core temperature and tumor temperature in this study. Furthermore, high cross-correlation values between core temperature, heart rate, and SpO2 were demonstrated to explain the fluctuation of mouse vital signs during PAI and PTT. SIGNIFICANCE: A design of a vital signs monitoring device, with low power consumption, was introduced in this study. A high cross correlation coefficient of mouse vital signs and the effects of CS-PPy NCs were observed, which explained the mouse physiological variation during the PAI and PTT experiments.
Asunto(s)
Técnicas Fotoacústicas , Terapia Fototérmica , Telemetría/instrumentación , Signos Vitales , Animales , Ratones , Polímeros , PirrolesRESUMEN
The biological effects of a light-emitting diode (LED) light therapy device are determined by irradiation parameters, mainly wavelength and power density. However, using a battery to provide power causes a problem in the variation of LED power density during battery discharge. As a result, maintaining a stable LED power density, along with extending battery life and operating time, are the primary concerns in designing a LED light therapy device. The present study aims to introduce a LED light therapy device design with different LED color power density control. A Fuzzy logic, based on the relationship between LED power density and operating time, was proposed to control constant power density in this design. The experimental results demonstrate that by using the designed controller, the LED light therapy device's power density (40 mW/cm2, 50 mW/cm2, 60 mW/cm2 for red, blue, and green light, respectively) can be controlled. The newly designed LED light therapy device could be considered an advanced version with energy savings and stabilized LED power emitting property under a broad range voltage variation.