Tractor Rollover Protection: Is the Incorrect Use of Foldable Rollover Protective Structures Due to Human or to Technical Issues?

OBJECTIVE: To identify the critical behaviors that may hinder the correct use of foldable rollover protective structures (FROPS) on tractors and to explore the influence of user factors and FROPS technical characteristics. BACKGROUND: FROPS are effective in preventing fatal injuries in rollover accidents if they are in the upright position. However, many farmers leave FROPS folded down. METHOD: Twenty farmers and sixteen models of tractors were involved in the study. Operators were observed while raising the FROPS, and the observed behaviors were correlated with user factors and FROPS technical features. RESULTS: In the initial rotation of the FROPS, higher lowered roll-bar to ground distance and FROPS pivot-pin to ground distance required more awkward and unbalanced postures (p = .02 and p = .01, respectively). When rotating the FROPS in upright position, smaller stature of the participants and higher FROPS pivot-pin to ground distance were significantly correlated with using the tractor's rear 3-point lower links as a supporting surface (p = .01 and p = .02, respectively). CONCLUSION: FROPS might be revised considering users' comfort in use and anthropometric variability, to improve reachability, avoid risky behaviors, and enhance FROPS operation. APPLICATION: Technical solutions to enhance FROPS accessibility may be developed, particularly by providing safe surfaces to support operators and highlighting the grasping points. Further best practices and information on correct gestures to handle the FROPS should be included in the tractor manual.

Falls From Agricultural Machinery: Risk Factors Related to Work Experience, Worked Hours, and Operators' Behavior.

Objective We investigated the risk factors for falls when egressing from agricultural tractors, analyzing the role played by worked hours, work experience, operators' behavior, and near misses. Background Many accidents occur within the agricultural sector each year. Among them, falls while dismounting the tractor represent a major source of injuries. Previous studies pointed out frequent hazardous movements and incorrect behaviors adopted by operators to exit the tractor cab. However, less is known about the determinants of such behaviors. In addition, near misses are known to be important predictors of accidents, but they have been under-investigated in the agricultural sector in general and as concerns falls in particular. Method A questionnaire assessing dismounting behaviors, previous accidents and near misses, and participants' relation with work was administered to a sample of Italian tractor operators ( n = 286). Results A mediated model showed that worked hours increase unsafe behaviors, whereas work experience decreases them. Unsafe behaviors in turn show a positive association with accidents, via the mediation of near misses. Conclusions We gave a novel contribution to the knowledge of the chain of events leading to fall accidents in the agricultural sector, which is one of the most hazardous industries. Applications Besides tractor design improvements, preventive training interventions may focus on the redesign of the actual working strategies and the adoption of engaging training methods in the use of machinery to optimize the learning of safety practices and safe behaviors.

Acute Effects of Partial-Body Cryotherapy on Isometric Strength: Maximum Handgrip Strength Evaluation.

De Nardi, M, Pizzigalli, L, Benis, R, Caffaro, F, and Cremasco, MM. Acute effects of partial-body cryotherapy on isometric strength: maximum handgrip strength evaluation. J Strength Cond Res 31(12): 3497-3502, 2017-The aim of the study was to evaluate the influence of a single partial-body cryotherapy (PBC) session on the maximum handgrip strength (JAMAR Hydraulic Hand dynamometer). Two hundred healthy adults were randomized into a PBC group and a control group (50 men and 50 women in each group). After the initial handgrip strength test (T0), the experimental group performed a 150-second session of PBC (temperature range between -130 and -160° C), whereas the control group stayed in a thermo neutral room (22.0 ± 0.5° C). Immediately after, both groups performed another handgrip strength test (T1). Data underlined that both groups showed an increase in handgrip strength values, especially the experimental group (Control: T0 = 39.48 kg, T1 = 40.01 kg; PBC: T0 = 39.61 kg, T1 = 41.34 kg). The analysis also reported a statistical effect related to gender (F = 491.99, P ≤ 0.05), with women showing lower handgrip strength values compared with men (women = 30.43 kg, men = 52.27 kg). Findings provide the first evidence that a single session of PBC leads to the improvement of muscle strength in healthy people. The results of the study imply that PBC could be performed also before a training session or a sport competition, to increase hand isometric strength.

Three-axial evaluation of whole-body vibration in agricultural telehandlers: The effects of an active cab-suspension system.

Agricultural and earth-moving machinery operators are particularly exposed to whole-body vibration (WBV), which has severe effects on health and affects comfort and performance. Few studies have investigated vibrational safety and comfort issues in telescopic handlers. These vehicles are widespread in many off-road applications-such as construction, agriculture, and mining-used to handle loads and to lift persons and equipment. This study investigated the effects of an active hydro-pneumatic cab-suspension system fitted to a telehandler on a driver's vibration exposure along the x-, y-, and z-axes, through both objective and subjective assessments. Sixteen healthy professional telehandler drivers took part in the study. Objective measurements were acquired at the operator's seat, and subjective ratings were taken while participants drove the telehandler with either a deactivated or activated suspension system at 12 kph on an ISO 5008 smooth track. The results showed that the activation of the cab-suspension system reduced the root-mean-square acceleration along the x- and z-axes (p =.038 and p =.000, respectively). Moreover, the frequency analysis showed a reduction in the acceleration along the z-axis in the range of 2-25 Hz (p <.05 for all comparisons); in particular, the acceleration was reduced by 50% in the higher frequency range (4-20 Hz). A reduction in the vibration intensity was perceived by the participants along the y- and z-axes (p =.009 and p =.003, respectively). Implications for the future development of suspension systems are discussed.

Promoting electricity conservation through behavior change: A study protocol for a web-based multiple-arm parallel randomized controlled trial.

BACKGROUND AND AIMS: As a part of the framework of the EU-funded Energy efficiency through Behavior CHANge Transition (ENCHANT) project, the present paper intends to provide a "Research Protocol" of a web-based trial to: (i) assess the effectiveness of behavioral intervention strategies--either single or in combination--on electricity saving, and (ii) unravel the psychological factors contributing to intervention effectiveness in households across Europe. METHODS AND MATERIALS: Six distinct interventions (i.e., information provision, collective vs. individual message framing, social norms, consumption feedback, competitive elements, and commitment strategies) targeting electricity saving in households from six European countries (i.e., Austria, Germany, Italy, Norway, Romania, and Türkiye) are evaluated, with an initial expected samples of about 1500 households per country randomly assigned to 12 intervention groups and two control groups, and data is collected through an ad-hoc online platform. The primary outcome is the weekly electricity consumption normalized to the last seven days before measurement per person per household. Secondary outcomes are the peak consumption during the last day before measurement and the self-reported implementation of electricity saving behaviors (e.g., deicing the refrigerator). The underlying psychological factors expected to mediate and/or moderate the intervention effects on these outcomes are intentions to save electricity, perceived difficulty of saving energy, attitudes to electricity saving, electricity saving habit strength, social norms to save electricity, personal norms, collective efficacy, emotional reaction to electricity consumption, and national identity. The intervention effectiveness will be evaluated by comparing psychological factors and consumption variables before and after the intervention, leading to a 14 (groups including 2 control groups) × 6 (time) mixed factorial design, with one factor between (group) and one factor within subjects (time)-6 measurements of the psychological factors and 6 readings of the electricity meters, which gives then 5 weeks of electricity consumption. RESULTS: Data collection for the present RCT started in January 2023, and by October 2023 data collection will conclude. DISCUSSION: Upon establishing feasibility and effectiveness, the outcomes of this study will assist policymakers, municipalities, NGOs, and other communal entities in identifying impactful interventions tailored to their unique circumstances and available resources. Researchers will benefit from a flexible, structured tool that allows the design, implementation and monitoring of complex interventions protocols. Crucially, the intervention participants will benefit from electricity saving strategies, fostering immediate effectiveness of the interventions in real-life contexts. TRIAL REGISTRATION: This trial was preregistered in the Open Science Framework: https://osf.io/9vtn4.

Improving Tractor Safety: A Comparison between the Usability of a Conventional and Enhanced Rear-Mounted Foldable ROPS (FROPS).

Tractor rollover is the main cause of both fatal and non-fatal injuries in agriculture. The foldable rollover protective structure (FROPS) can help to prevent these injuries. However, in many cases, the FROPS is left in a folded-down position. Human factor and rear-mounted FROPS technical characteristics influence operators' behavior in roll-bar handling. To improve the FROPS's comfortable use, the prototype of an enhanced handling system was developed, and its usability was tested and compared with a conventional FROPS. Usability was assessed with 93 novice tractor users through an ad hoc questionnaire (investigating perceived effort, time demand, the posture adopted and satisfaction) and observations (investigating effectiveness and efficiency) during lowering and raising tasks. For both tasks, the participants perceived significantly less effort, less physical discomfort, a higher level of satisfaction and less time demand while operating the enhanced FROPS. Observations showed that the critical issues that emerged for the conventional FROPS were eliminated by adopting the developed and implemented handling system. The developed handling system showed itself to be usable and effective in making the FROPS easier and safer to be operated.

Promoting farming sustainability: The effects of age, training, history of accidents and social-psychological variables on the adoption of on-farm safety behaviors.

INTRODUCTION: Occupational safety and health (OSH) have a remarkable impact on the sustainability of firms and organizations. However, the sustainability perspective has often focused primarily on environmental and economic concerns, leaving key social and workplace aspects, such as OSH, underemphasized. The link between all these aspects is particularly relevant in agriculture. METHOD: In the present study we analyzed the paths by which the worker's age, participation in safety training, and previous history of accidents and near misses can influence the adoption of safety behaviors in agriculture through the mediation of attitudes towards safety and perceived behavioral control. Three hundred and ten Italian agricultural operators were administered an ad-hoc questionnaire. RESULTS: Having attended safety training courses, having been exposed to previous accidents and near misses, and age showed a positive association with the adoption of on-farm safety behaviors, through the mediation of perceived behavioral control. In more detail, participation in training courses and age showed a positive association with perceived behavioral control, while the previous history of accidents and near misses showed a negative association with behavioral control. In turn, perceived behavioral control was positively associated with the adoption of safety behaviors. CONCLUSIONS: The present study focused on the chain of events leading to the adoption of on-farm safety behaviors, which can prevent an accidents, pointing out the more critical variables and the level at which they intervene, identifying possible areas of targeted interventions. Practical applications: Implications for the development of targeted interventions may deal with: (a) training activities increasing farm operators' sense of control over their safety, (b) older farmers involvement in mentoring initiatives, and (c) systematic recording and use of previous history of accidents and near misses as inputs for training activities to discuss their implications for on-farm safety.

Norms, prices, and commitment: A comprehensive overview of field experiments in the energy domain and treatment effect moderators.

This paper provides a comprehensive overview of field experiments utilizing social norms, commitment and price-based interventions to promote energy conservation, load shifting, and energy efficiency behaviors. Treatment effects reported in the extant literature, as well as the factors that may strengthen or dampen these effects are reviewed. We find that social norm and incentive-based interventions mostly achieve small reductions in energy consumption, and that the effects of commitment-based interventions are essentially zero for the most part. Incentive effects on energy efficiency investments are mostly non-existent, safe for a few exceptions. One gap that we identify is the almost complete absence of field experiments leveraging social norms or commitment to promote energy efficiency investments. We discuss a broad range of (mostly under-researched) plausible moderators of the interventions' effects. Crucially, a more careful attention to moderators in future research can highlight instances in which interventions can be effective, notwithstanding their modest or non-existent average treatment effects. Our review offers a starting point in this regard.

Innovating Occupational Safety Training: A Scoping Review on Digital Games and Possible Applications in Agriculture.

Digital games have been successfully applied in different working sectors as an occupational safety training method, but with a very limited application in agriculture. In agriculture and other productive sectors, unintentional injuries tend to occur with similar dynamics. A literature review was carried out to understand how occupational risks are addressed during game-based safety training in different productive sectors and how this can be transferred to agriculture. Literature about "serious game" and "gamification" as safety training methods was searched in WEB OF SCIENCE, SCOPUS, PUBMED and PsycINFO databases. In the forty-two publications retained, the computer was identified as the most adopted game support, whereas "points", "levels", "challenges" and "discovery" were the preferred game mechanics. Moreover, an association can be detected between the game mechanics and the elements developed in the game. Finally, during the game assessment, much positive feedback was collected and the games proved to be able to increase the operators' skills and safety knowledge. In light of the results, insights are provided to develop an effective, satisfying and engaging safety game training for workers employed in agriculture. Games can be best used to learn and they are certain to improve over the next few years.

Tailoring Safety Training Material to Migrant Farmworkers: An Ergonomic User-Centred Approach.

Lectures are the most commonly used training method but may not be effective in communicating safety information among migrant workers because of language and cultural barriers. The comprehension of safety information is particularly urgent in highly hazardous sectors such as agriculture, which has a high migrant workforce rate. In this study, an ergonomic user-centred approach was adopted to develop and evaluate safety training material targeting migrants employed on Italian farms. Focus groups with both trainers and migrants were carried out to collect information on critical issues in traditional training material, the most and least comprehended topics and suggestions for training improvement. Based on the focus group analysis, the training material was developed considering several visual factors and more engaging interaction between trainers and migrant trainees. The usability of the developed material was then evaluated in a group of 20 migrant farmworkers through a questionnaire assessing the knowledge of safety information before (T0) and after (T1) the training (effectiveness), perceived effort in learning (efficiency) and user satisfaction after training. The results showed improved knowledge, low perceived effort and high satisfaction, pointing to the positive effects of active user involvement when designing targeted training materials.

Comprehension of Safety Pictograms Affixed to Agricultural Machinery among Pakistani Migrant Farmworkers in Italy.

Objectives: Safety pictograms are important graphic elements that are useful for rapidly conveying messages in workplaces. The purpose of this study was to investigate the comprehension of safety pictograms affixed to agricultural machinery among a group of Pakistani migrant farmworkers employed in Italy. Methods: Interviews about the meanings attributed to four standardized safety pictograms affixed to agricultural machinery depicting the most frequent causes of farm accidents were administered to 29 Pakistani migrant farmworkers employed on Italian farms. Results: There was high variability in pictogram comprehension. None of the participants interpreted all the pictograms in accordance with the definitions provided by the international standards. Higher comprehension rates were reported for pictograms related to the risks of tractor rollover and foot injury, while pictograms referring to the need to consult a technical manual and the risk of entanglement yielded lower comprehension scores. Previous farming experience in the country of origin and the number of years of education were significantly associated with comprehension scores. Conclusion: A discussion of pictogram features that may be critical for comprehension is provided, and (re)design suggestions are given to improve the cross-cultural comprehension of these safety signs.

Warning against Critical Slopes in Agriculture: Comprehension of Targeted Safety Signs in a Group of Machinery Operators in Italy.

Steep slopes are the main cause of rollover incidents in agriculture. Targeted safety signs have been developed to warn machinery operators against risky slopes. However, machinery user's manuals and road signs report information regarding slope steepness in two different ways, by using the tilt angle in degrees and the slope percentage, respectively. In this study, we investigated the comprehension of safety signs depicting critical slopes, either in degrees or as percent values in a group of Italian agricultural machinery operators while considering the possible influence of previous experience with agricultural machinery, previous incidents, and on-farm occupation. Eighteen tractor and self-propelled machinery operators were administered graphical representations of seven slope angles in a randomized order and then were asked to estimate the slope steepness as both a tilt angle and a slope percentage. The participants tended to overestimate slope steepness in degrees, whereas the opposite was true for percentages. Farmers who were previously involved in a machinery-related incident were more accurate in their estimates. The present results raise some considerations regarding the need to redesign safety communication and to promote targeted training interventions.

Risk Assessment for Musculoskeletal Disorders in Forestry: A Comparison between RULA and REBA in the Manual Feeding of a Wood-Chipper.

The analysis of the postural attitude of workers during the interaction with workstation's elements and working environment is essential in the evaluation and prevention of biomechanical overload risk in workplaces. RULA (Rapid Upper Limb Assessment) and REBA (Rapid Entire Body Assessment) are the two easiest methods for postural risk assessment in the workplace. Few studies investigated postural risk in forestry sector with regard to human⁻machine interaction, in particular manually fed wood-chippers. The aim of this study was to evaluate the postures assumed by an operator during the manual feeding of a wood-chipper, and to compare RULA and REBA, in order to identify the more effective and appropriate method for the assessment of the risk of biomechanical postural overload. The results pointed out several postural issues of the upper limbs, and showed that RULA is a more precautionary method to protect operator's health during the targeted tasks. Implications to improve the human⁻wood-chipper interaction are discussed.

Conveying Safety Messages on Agricultural Machinery: The Comprehension of Safety Pictorials in a Group of Migrant Farmworkers in Italy.

The comprehension of safety signs affixed to agricultural machinery is fundamental to warning users about the residual risks which cannot be eliminated with machinery design and the adoption of protections. This is particularly relevant for the migrant workforce, which may encounter some language barriers with written safety communication. The present study aimed to investigate the comprehension of safety signs affixed to agricultural machinery in a group of migrants from both European and non-European countries employed in Italian agriculture. Thirty-seven migrant farmworkers (12 Indians, 17 Pakistanis, and eight Romanians) were individually interviewed to test the comprehension of four safety signs referring to the main causes of fatal and non-fatal injuries caused by interactions with farm machinery. Romanians obtained the highest comprehension performance (68.8% of correct answers), followed by Indians (35.4%), with Pakistanis being last (32.4%). The nationality and the previous experience as a farmworker significantly affected the comprehension of safety signs. The results pointed out the importance of adequately training migrants on the meaning of safety signs. Beside this, the study suggests a redesign of the signs, considering some signs' features to enhance pictorials' cross-cultural comprehension.

Part-time farmers and accidents with agricultural machinery: a moderated mediated model on the role played by frequency of use and unsafe beliefs.

OBJECTIVES: We aimed at testing a model of the direct and indirect effects of being a part-time farmer on the probability of being involved in an agricultural machinery-related accident, considering the role played by unsafe beliefs and the frequency of use of machinery. METHODS: Two-hundred and fifty-two Italian men, regular users of agricultural machinery (age: Mean = 45.1 years, standard Deviation = 17.5), were administered a paper-and-pencil questionnaire addressing their relation with work, unsafe beliefs, and previous experience of machinery-related accidents. RESULTS: Being a part-time farmer showed a positive association with unsafe beliefs only among occasional machinery users. Unsafe beliefs in turn showed a positive association with accidents. CONCLUSIONS: The study gave a novel contribution to the knowledge of the chain of events connecting part-time farmers with machinery-related accidents. Preventive training interventions targeting part-timer farmers using agricultural machinery just occasionally should be developed.

Machinery-Related Perceived Risks and Safety Attitudes in Senior Swedish Farmers.

OBJECTIVES: To perform an ergonomic analysis of work and machinery-related risks in a group of Swedish older farmers, investigating farmers' attitudes and perceptions about: 1) health status and work motivation, 2) physical and cognitive workload and difficulties in the interaction with machinery and technological innovations, and 3) risks and safety practices. METHODS: Nine Swedish male farmers aged 65+ were administered a semi-structured interview and a questionnaire. RESULTS: Participants perceived themselves as being in good health and considered farming as a good proxy of their health status. They reported an increased physical workload but did not describe any cognitive workload. Technology was reported to have low usability, and thus its benefits cannot be fully exploited. Older farmers acknowledged the existence of "new risks" related to the aging process and mainly referred to the common sense and previous experience as the best safety practices. CONCLUSION: Multilevel interventions focused on the capabilities and limits of the older farmers should be developed, involving both training activities and design solutions for the machinery that can support older farmers' health and safety.

Safety signs on agricultural machinery: Pictorials do not always successfully convey their messages to target users.

This study investigated the extent to which a sample of Italian users comprehended safety pictorials used on agricultural machinery. A questionnaire with 12 safety pictorials was administered to 248 users of agricultural machinery. For each of the pictorials, the participants were asked to select the most appropriate description of four written choices. The investigated safety pictorials were, in general, not well comprehended. Two different classes of participants were identified, each with a different level of comprehension. The participants with better comprehension were characterized by the regular use of agricultural machinery and frequent previous exposure to pictorials. The need for training courses focusing on safety pictorials and their meanings, as well as the need for improvement to the pictorials themselves to make them more easily comprehended, is discussed.

It does not occur by chance: a mediation model of the influence of workers' characteristics, work environment factors, and near misses on agricultural machinery-related accidents.

Agriculture is among the most hazardous productive sectors, and farm machinery is a major source of injury. In the present study, a mediated model was used to test the role played by workers' characteristics, work environment factors, and near misses in predicting agricultural machinery-related accidents in a sample of Italian users (n = 290). Hours worked per week (via the mediation of an adverse work environment) showed a positive association and years of work experience (via the mediation of risk perception) showed a negative association with the probability of being involved in a near miss, which in turn showed a positive association with the probability of being involved in a machinery-related accident. Implications for tailored preventive interventions are discussed.

Comprehension of safety pictograms affixed to agricultural machinery: A survey of users.

INTRODUCTION: Pictograms affixed to agricultural machinery are important tools to reduce the occurrence of accidents and injuries when correctly noticed, comprehended, and followed. This study investigated the knowledge of safety pictograms used in agricultural machinery in a sample of farmers and farm workers and examined the factors influencing their comprehension. METHOD: A questionnaire with 12 safety pictograms used for agricultural machinery was administered to 281 owners or users of agricultural machinery. For each of the pictograms, the participants had to select the most appropriate verbal description from among four choices. RESULTS: The pictograms examined yielded poor comprehension scores, including warnings related to the most frequent accidents involving agricultural machinery. Familiarity with the pictograms and years of experience with agricultural machinery significantly increased users' comprehension of the meaning of the pictograms. CONCLUSIONS: Specific training programs should be designed to draw attention to safety pictograms and to instill their meaning.