Melanoma spheroid-containing artificial dermis as an alternative approach to in vivo models.

Melanoma spheroid-loaded 3D skin models allow for the study of crucial tumor characteristics and factors at a superior level because the neoplastic cells are integrated into essential human skin components, permitting tumor-skin model communication. Herein, we designed a melanoma-containing artificial dermis by inserting multicellular tumor spheroids from the metastatic phase of WM 1617 melanoma cells into an artificial dermis. We cultured multicellular melanoma spheroids by hanging drop method (250 cells per drop) with a size of 420 µm in diameter after incubation for 14 days. These spheroids were integrated into the dermal equivalents that had been previously preparedwith a type-I collagen matrix and healthy fibroblasts. The melanoma spheroid cells invaded and proliferated in the artificial dermis. Spheroids treated with a 1.0 µmol/L aluminum chloride phthalocyanine nanoemulsion in the absence of light showed high cell viability. In contrast, under irradiation with visible red light (660 nm) at 25 J/cm2, melanoma cells were killed and the healthy tissue was preserved, indicating that photodynamic therapy is effective in such a model. Therefore, the 3D skin melanoma model has potential to promote research in full-thickness skin model targeting optimized preclinical assays.

DNA polymeric films as a support for cell growth as a new material for regenerative medicine: Compatibility and applicability.

DNA polymeric films (DNA-PFs) are a promising drug delivery system (DDS) in modern medicine. In this study, we evaluated the growth behavior of oral squamous cell carcinoma (OSCC) cells on DNA-PFs. The morphological, biochemical, and cytometric features of OSCC cell adhesion on DNA-PFs were also assessed. An initial, temporary alteration in cell morphology was observed at early time points owing to the inhibition of cell attachment to the film, which then returned to a normal morphological state at later time points. MTT and resazurin assays showed a moderate reduction in cell viability related to increased DNA concentration in the DNA-PFs. Flow cytometry studies showed low cytotoxicity of DNA-PFs, with cell viabilities higher than 90% in all the DNA-PFs tested. Flow cytometric cell cycle analysis also showed average cell cycle phase distributions at later time points, indicating that OSCC cell growth is maintained in the presence of DNA-PFs. These results show high biocompatibility of DNA-PFs and suggest their use in designing "dressing material," where the DNA film acts as a support for cell growth, or with incorporation of active or photoactive compounds, which can induce tissue regeneration and are useful to treat many diseases, especially oral cancer.

Renal proximal tubule-on-a-chip in PDMS: fabrication, functionalization, and RPTEC:HUVEC co-culture evaluation.

'On-a-chip' technology advances the development of physiologically relevant organ-mimicking architecture by integrating human cells into three-dimensional microfluidic devices. This method also establishes discrete functional units, faciliting focused research on specific organ components. In this study, we detail the development and assessment of a convoluted renal proximal tubule-on-a-chip (PT-on-a-chip). This platform involves co-culturing Renal Proximal Tubule Epithelial Cells (RPTEC) and Human Umbilical Vein Endothelial Cells (HUVEC) within a polydimethylsiloxane microfluidic device, crafted through a combination of 3D printing and molding techniques. Our PT-on-a-chip significantly reduced high glucose level, exhibited albumin uptake, and simulated tubulopathy induced by amphotericin B. Remarkably, the RPTEC:HUVEC co-culture exhibited efficient cell adhesion within 30 min on microchannels functionalized with plasma, 3-aminopropyltriethoxysilane, and type-I collagen. This approach significantly reduced the required incubation time for medium perfusion. In comparison, alternative methods such as plasma and plasma plus polyvinyl alcohol were only effective in promoting cell attachment to flat surfaces. The PT-on-a-chip holds great promise as a valuable tool for assessing the nephrotoxic potential of new drug candidates, enhancing our understanding of drug interactions with co-cultured renal cells, and reducing the need for animal experimentation, promoting the safe and ethical development of new pharmaceuticals.

Photo-responsive polymeric micelles for the light-triggered release of curcumin targeting antimicrobial activity.

Nanocarriers have been successfully used to solubilize, deliver, and increase the bioavailability of curcumin (CUR), but slow CUR release rates hinder its use as a topical photosensitizer in antimicrobial photodynamic therapy. A photo-responsive polymer (PRP) was designed for the light-triggered release of CUR with an effective light activation-dependent antimicrobial response. The characterization of the PRP was compared with non-responsive micelles comprising Pluronics™ P123 and F127. According to the findings, the PRP formed photo-responsive micelles in the nanometric scale (< 100 nm) with a lower critical micelle concentration (3.74 × 10-4 M-1, 5.8 × 10-4 M-1, and 7.2 × 10-6 M-1 for PRP, F127, P123, respectively, at 25°C) and higher entrapment efficiency of CUR (88.7, 77.2, and 72.3% for PRP, F127, and P123 micelles, respectively) than the pluronics evaluated. The PRP provided enhanced protection of CUR compared to P123 micelles, as demonstrated in fluorescence quenching studies. The light-triggered release of CUR from PRP occurred with UV light irradiation (at 355 nm and 25 mW cm-2) and a cumulative release of 88.34% of CUR within 1 h compared to 80% from pluronics after 36 h. In vitro studies showed that CUR-loaded PRP was non-toxic to mammal cell, showed inactivation of the pathogenic microorganisms Candida albicans, Pseudomonas aeruginosa, and methicillin-resistant Staphylococcus aureus, and decreased biofilm biomass when associated with blue light (455 nm, 33.84 J/cm2). The findings show that the CUR-loaded PRP micelle is a viable option for antimicrobial activity.

Type-I Collagen/Collagenase Modulates the 3D Structure and Behavior of Glioblastoma Spheroid Models.

Multicellular tumor spheroids have emerged as well-structured, three-dimensional culture models that resemble and mimic the complexity of the dense and hypoxic cancer microenvironment. However, in brain tumor studies, a variety of glioblastoma multiforme (GBM) cell lines only self-assemble into loose cellular aggregates, lacking the properties of actual glioma tumors in humans. In this study, we used type-I collagen as an extracellular matrix component to promote the compaction of GBM aggregates forming tight spheroids to understand how collagen influences the properties of tumors, such as their growth, proliferation, and invasion, and collagenase to promote collagen degradation. The GBM cell lines U87MG, T98G, and A172, as well as the medulloblastoma cell line UW473, were used as standard cell lines that do not spontaneously self-assemble into spheroids, and GBM U251 was used as a self-assembling cell line. According to the findings, all cell lines formed tight spheroids at collagen concentrations higher than 15.0 µg mL-1. Collagen was distributed along the spheroid, similarly to that observed in invasive GBM tumors, and decreased cell migration with no effect on the cellular uptake of small active molecules, as demonstrated by uptake studies using the photosensitizer verteporfin. The enzymatic cleavage of collagen affected spheroid morphology and increased cell migration while maintaining cell viability. Such behaviors are relevant to the physiological models of GBM tumors and are useful for better understanding cell migration and the in vivo infiltration path, drug screening, and kinetics of progression of GBM tumors.

Interaction of triblock copolymers (Pluronic®) with DMPC vesicles: a photophysical and computational study.

Pluronic/lipid mix promises stealth liposomes with long circulation time and long-term stability for pharmaceutical applications. However, the influence of Pluronics on several aspects of lipid membranes has not been fully elucidated. Herein it was described the effect of Pluronics on the structured water, alkyl chain conformation, and kinetic stability of dimyristoylphosphatidylcholine (DMPC) liposomes using interfacial and deeper fluorescent probes along with computational molecular modeling data. Interfacial water changed as a function of Pluronics' hydrophobicity with polypropylene oxide (PPO) anchoring the copolymers in the lipid bilayer. Pluronics with more than 30-40 PO units had facilitated penetration at the bilayer while shorter PPO favored a more interfacial interaction. Low Pluronic concentrations provided long-term stability of vesicles by steric effects of polyethylene oxide (PEO), but high amounts destabilized the vesicles as a sum of water-bridge cleavage at the polar head group and the reduced alkyl-alkyl interactions among the lipids. The high kinetic stability of Pluronic/DMPC vesicles is a proof-of-concept of its advantages and applicability in nanotechnology over conventional liposome-based pharmaceutical products for future biomedical applications.

Expanding the Limits of Photodynamic Therapy: The Design of Organelles and Hypoxia-Targeting Nanomaterials for Enhanced Photokilling of Cancer.

Photodynamic therapy (PDT) is a minimally invasive clinical protocol that combines a nontoxic photosensitizer (PS), appropriate visible light, and molecular oxygen for cancer treatment. This triad generates reactive oxygen species (ROS) in situ, leading to different cell death pathways and limiting the arrival of nutrients by irreversible destruction of the tumor vascular system. Despite the number of formulations and applications available, the advancement of therapy is hindered by some characteristics such as the hypoxic condition of solid tumors and the limited energy density (light fluence) that reaches the target. As a result, the use of PDT as a definitive monotherapy for cancer is generally restricted to pretumor lesions or neoplastic tissue of approximately 1 cm in size. To expand this limitation, researchers have synthesized functional nanoparticles (NPs) capable of carrying classical photosensitizers with self-supplying oxygen as well as targeting specific organelles such as mitochondria and lysosomes. This has improved outcomes in vitro and in vivo. This review highlights the basis of PDT, many of the most commonly used strategies of functionalization of smart NPs, and their potential to break the current limits of the classical protocol of PDT against cancer. The application and future perspectives of the multifunctional nanoparticles in PDT are also discussed in some detail.

Photosensitizer-based metal-organic frameworks for highly effective photodynamic therapy.

Photodynamic therapy (PDT) uses a photosensitizer, molecular oxygen, and visible light as an alternative clinical protocol against located malignant tumors and other diseases. More recently, PDT has been combined to immunotherapy as a promising option to treat metastatic cancer. However, previous generations of photosensitizers (PSs) revealed clinical difficulties such as long-term skin photosensitivity (first generation), the need for drug delivery vehicles (second generation), and intracellular self-aggregation (third generation), which have generated a somewhat confusing scenario in PDT approaches and evolution. Recently, metal-organic frameworks (MOFs) with exceptionally high PS loading as a building unit of MOF framework have emerged as fourth-generation PS and presented outstanding outcomes under pre-clinical studies. For PS-based MOFs, the inorganic building unit (metal ions/clusters) plays an important role as a coadjuvant in PDT to alleviate hypoxia, to decrease antioxidant species, to yield ROS, or to act as a contrast agent for imaging-guided therapy. In this review, we intend to carry out a broad update on the recent history and the characteristics of PS-based MOFs from basic chemistry to the structure relationship with biological application in PDT. The details and variables that result in different photophysics, size, and morphology, are discussed. Also, we present an overview of the achievements on the pre-clinical assays in combination with other strategies, including alleviating hypoxia in solid tumors, chemotherapy, and the most recent immunotherapy for cancer.

Theranostic verteporfin- loaded lipid-polymer liposome for photodynamic applications.

In this study we report a novel theranostic lipid-polymer liposome, obtained from DPPC and the triblock copolymer F127 covalently modified with 5(6)-carboxyfluorescein (CF) for photodynamic applications. Due to the presence of F127, small unilamellar vesicle (SUV) liposomes were synthesized by a simple and fast thin-film hydration method without the need for an extrusion process. The vesicles have around 100 nm, low polydispersity and superb solution stability. The clinically used photosensitizer verteporfin (VP) was entrapped into the vesicles, mostly in monomeric form, with 90% loading efficiency. Stern-Volmer and fluorescence lifetime assays showed heterogeneous distribution of the VP and CF into the vesicles, ensuring the integrity of their individual photophysical properties. The theranostic properties were entirely photoactivatable and can be trigged by a unique wavelength (470 nm). The feasibility of the system was tested against the Glioblastoma multiforme cell line T98G. Cellular uptake by time-resolved fluorescence microscopy showed monomerized VP (monoexponential decay, 6.0 ns) at nucleus level, while CF was detected at the membrane by fluorescence microscopy. The strategy's success was supported by the reduction of 98% in the viability of T98G cells by the photoactivated lipid-polymer liposome with [VP] = 1.0 µmol L-1. Therefore, the novel theranostic liposome is a potential system for use in cancer and ocular disease therapies.

Rapid formation of Small Unilamellar Vesicles (SUV) through low-frequency sonication: An innovative approach.

Liposomes are membrane models and excellent Drug Delivery Systems. However, their preparation is expensive, labor intensive, time consuming, and sometimes toxic. Recently, we published an innovative methodology for the production of homogeneous Small Unilamellar Vesicles (SUV) through a simple, fast, relatively low cost, and reproducible process that resulted in very stable vesicles. The methodology involves a small amount of F127 triblock Pluronic® copolymer (0.02% m/V) to a phospholipid (DPPC, DOPC, and DSPC), followed by the solid dispersion methodology. After that, during the thin-film hydration process (of lipids and F127), SUVs are quickly formed after 30 s of sonication using bath equipment at a low frequency of 42 kHz. The resultant colloidal solution was homogeneous with liposomes lower than ˜100 nm of hydrodynamic diameter. The SUV formation is highly temperature dependent. However, it functions independently from the lipid´s phase (gel or liquid-crystal phases). A preparation with Pluronic P123 did not lead to homogeneous SUV. We found that the conditions for SUV formation feature a mixture of F127 and lipids at above a critical temperature. This temperature is not the copolymer´s CMT (micelle is not required). Interestingly, the long PEO groups of F127 play an essential role in this SUV formation, which is proposed to be governed by the "Budding Off" model. The findings show a complex combination of factors: a sum of the sonoporation, the oscillation effects of the compressed/dilated regions, the frequency of oscillation, and the temperature-dependence on long PEO groups. Also, the outer lipid monolayer interaction might by responsible for generating "daughter" vesicles from "mother" vesicles in the mechanism.

Theoretical and experimental studies concerning monomer/aggregates equilibrium of zinc phthalocyanine for future photodynamic action.

Monomeric zinc phthalocyanine has been studied as a promising active photosensitizer in photodynamic therapy against cancer, in which its aggregate form is non-active. This paper aimed to describe the monomer/aggregates equilibrium of zinc phthalocyanine in binary water/DMSO mixtures. To reach this aim theoretical calculation, electronic absorption, static and time-resolved fluorescence, and resonance light scattering was used. Zinc phthalocyanine shows a complex water dependence behavior in the mixture. At least three distinct steps were observed: (i) until 30% water zinc phthalocyanine is essentially in the monomeric form, changing to (ii) small slipped cofacial-aggregates around 30% to 40% water and finally to (iii) a staircase arrangement of large aggregates at higher water percent. The staircase arrangement is driven by the intermolecular coordination between the pyrrolic nitrogen lone-pairs and the central metal zinc. The water-Zn coordination governs the fluorescence quenching by a static mechanism. These results have direct relevance in the better understanding on the behavior of zinc phthalocyanine in vivo and when incorporated in drug delivery systems for clinical applications in photodynamic therapy.

PEG-coated vesicles from Pluronic/lipid mixtures for the carrying of photoactive erythrosine derivatives.

Liposomes are very attractive membrane models and excellent drug delivery systems. Concerning their drug delivery aspects, the mixing liposomes with biocompatible copolymers allows for stability and the incorporation of several drugs. We developed PEG coated vesicles from the mixture of DPPC and F127 Pluronic copolymer to obtain long-circulating nanoparticles (mixed vesicles). We employed an innovative process previously developed by us: a small amount of F127 mixed in DPPC, thin film preparation, followed by hydration (lipids plus F127) using a bath sonicator cleaner type, forming unilamellar spherical vesicles with diameter ∼100 nm. The formed PEG coated vesicles were incorporated with the xanthene dye Erythrosine B (ERY), and its ester derivatives as photosensitizers (PS) for photodynamic proposes. The F127/DPPC mixed vesicles promoted a higher PS incorporation, and with better thermal and kinetic stability, at least 60 days, when compared to conventional DPPC liposome. The binding constant and quenching analysis revealed that with a higher PS hydrophobicity, PS affinity increases toward the nanoparticle and results in a deeper PS location inside the lipid bilayer. An increment in the fluorescence quantum yield was observed, while the PS singlet oxygen generations remained high. Dialysis studies demonstrated that PS were released based on their hydrophobicity. Permeation analysis showed that all PS can reach the deeper regions of the skin. The Decyl Ester derivative/nanoparticle exhibited high photoactivity against Caco-2 cancer cells (in vitro studies). The PEG coated from F127/DPPC mixed vesicles are very promising nanocarriers for erythrosine and its derivatives.

Evaluation of aluminum phthalocyanine chloride and DNA interactions for the design of an advanced drug delivery system in photodynamic therapy.

The aim of this study was to evaluate the interaction of aluminum phthalocyanine chloride (AlClPc) with double-stranded DNA. Absorption and fluorescence spectra, resonance light scattering, and circular dichroism were evaluated in water and water/ethanol mixtures with different concentrations of DNA or AlClPc. AlClPc showed a high ability to bind to DNA in both water and 4/6 water/ethanol mixture (v/v), with a majority of monomeric and aggregated initial forms of AlClPc, respectively. In this interaction, AlClPc bound preferentially to the grooves of DNA. The monomeric/aggregate state of AlClPc in DNA was dependent on the AlClPc/DNA ratio. At low concentrations of AlClPc, the interaction of AlClPc with few DNA sites caused a curvature in the DNA structure that provided a favorable environment for the intercalation of AlClPc aggregates. Increase in AlClPc concentration induced interactions with a high number of binding sites on DNA, which prevented bending and therefore aggregation of AlClPc molecules throughout the double-stranded DNA. These results are relevant to the understanding of the behavior and interaction of AlClPc with double-stranded DNA in the design of novel drug delivery systems for clinical application in photodynamic therapy as a new approach to treat skin or oral cancer, scars, or wound healing.

Multifunctional theranostic Pluronic mixed micelles improve targeted photoactivity of Verteporfin in cancer cells.

Nanotechnology development provides new strategies to treat cancer by integration of different treatment modalities in a single multifunctional nanoparticle. In this scenario, we applied the multifunctional Pluronic P123/F127 mixed micelles for Verteporfin-mediated photodynamic therapy in PC3 and MCF-7 cancer cells. Micelles functionalization aimed the targeted delivery by the insertion of biotin moiety on micelle surface and fluorescence image-based through rhodamine-B dye conjugation in the polymer chains. Multifunctional Pluronics formed spherical nanoparticulated micelles that efficiently encapsulated the photosensitizer Verteporfin maintaining its favorable photophysical properties. Lyophilized formulations were stable at least for 6months and readily reconstituted in aqueous media. The multifunctional micelles were stable in protein-rich media due to the dual Pluronic mixed micelles characteristic: high drug loading capacity provided by its micellar core and high kinetic stability due its biocompatible shell. Biotin surface functionalized micelles showed higher internalization rates due biotin-mediated endocytosis, as demonstrated by competitive cellular uptake studies. Rhodamine B-tagged micelles allowed monitoring cellular uptake and intracellular distribution of the formulations. Confocal microscopy studies demonstrated a larger intracellular distribution of the formulation and photosensitizer, which could drive Verteporfin to act on multiple cell sites. Formulations were not toxic in the dark condition, but showed high Verteporfin-induced phototoxicity against both cancer cell lines at low drug and light doses. These results point Verteporfin-loaded multifunctional micelles as a promising tool to further developments in photodynamic therapy of cancer.

Lipid vesicles loading aluminum phthalocyanine chloride: Formulation properties and disaggregation upon intracellular delivery.

Aluminum phthalocyanine chloride (AlClPc) is a second-generation photodynamic therapy (PDT) photosensitizer characterized for its high hydrophobicity and self-aggregation tendency in aqueous media, which hamper its potential application. Aiming at AlClPc solubilization we proposed here the use of 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) at different proportions to form mixed lipid vesicles (LVs) as a drug delivery system. LVs were prepared by ethanol injection method and formed nano-sized vesicles (about 100nm) with suitable polydispersity index, negative zeta potential, and stable in aqueous medium for at least 50days. AlClPc strongly interacts with LV (high binding constant values), especially due to aluminum-phosphate specific interactions, which gives a surface localization to AlClPc molecules as demonstrated by fluorescence quenching data. Anisotropy, static and time-resolved fluorescence measurements corroborated with these results and demonstrated that AlClPc self-aggregation occurred even in the liposomes. However, formulation uptake by oral squamous cell carcinoma (OSCC) the AlClPc was distributed in cellular organelles and suffered a disaggregation process demonstrated by fluorescence life-time imaging microscopy. This amazing behavior is new and increases the scientific knowledge about the intracellular mechanism of action of PDT photosensitizers. In addition, these results open a new perspective to the potential use of AlClPc-LV formulations for photodynamic treatment.

Spectroscopic analysis of aluminum chloride phthalocyanine in binary water/ethanol systems for the design of a new drug delivery system for photodynamic therapy cancer treatment.

This study evaluated the behavior of aluminum chloride phthalocyanine in a binary water/ethanol mixture using electronic absorption spectroscopy and static and time-resolved fluorescence spectroscopy. The electronic absorption spectra, resonance light scattering and fluorescence quenching of aluminum chloride phthalocyanine in water/ethanol mixtures were studied at several concentrations. The electronic absorption spectra and fluorescence quenching changed significantly at approximately 50% water (v/v). Below 50% water, the dimerization constant values were negative (-2609.2 M(-1) and -506.5 M(-1) at 30% and 40% of water, respectively), indicating that the formation of aggregates under these conditions is not favored. However, at 50% water, the dimerization constant value was estimated to be 559.7 M(-1), which indicates the presence of dimers. Above 60% water, the aggregation process was responsible for the balance between large complexes (such as trimers, tetramers or oligomers) formed in the medium under these conditions. The appearance of new absorption bands at 387 nm and 802 nm and their bathochromic shift relative to the monomer bands suggested that some J-type aggregates form. These results are relevant to understanding the behavior and use of aluminum chloride phthalocyanine in the design of new drug delivery systems for clinical application in photodynamic therapy as a new approach to treat skin cancer.

Nanostructured Polymeric Micelles Carrying Xanthene Dyes for Photodynamic Evaluation.

It was evaluated the properties of the xanthene dyes Erythrosin B, Eosin Y and theirs Methyl, Butyl and Decyl ester derivatives as possible photosensitizers (PS) for photodynamic treatments. The more hydrophobic dyes self-aggregate in water/ethanol solutions above 70% water (vol/vol) in the mixture. In buffered water, these PS were encapsulated in Pluronic polymeric surfactants of P-123 and F-127 by two methodologies: direct addition and the thin-film solid dispersion methods. The thin-film solid method provided formulations with higher stabilities besides effective encapsulation of the PS as monomers. Size measurements demonstrated that Pluronic forms self-assembled micelles with uniform size, which present slightly negative surface potential and a spherical form detected by TEM microscopy. The ester length modulates xanthene localization in the micelle, which is deeper with the increase in the alkyl chain. Moreover, some PS are distributed into two populations: one on the corona micelle interface shell (PEO layer) and the other into the core (PPO region). Although all PS formulations show high singlet oxygen quantum yield, promising results were obtained for Erythrosin B esters with the hydrophobic P-123, which ensures their potential as drug for clinical photodynamic applications.