RESUMEN
OBJECTIVE: To investigate the impact of various degrees of white spot lesions (WSLs) of maxillary anterior teeth on the aesthetic perception and treatment satisfaction among orthodontic patients, orthodontists and other dental specialists and to evaluate the differences among the three groups. METHODS: A total of 45 orthodontic patients (OP), 45 orthodontists (OR) and 45 other dental specialists (OS) were recruited. Subjective evaluations of perceived aesthetics and treatment satisfaction were performed towards eight digitally generated photographs of maxillary anterior teeth with incremental degrees of WSLs using a numerical visual analogue scale (VAS) from 0 to 100. Data were collected and analysed with descriptive statistics, repeated one-way analysis of variance and multivariable generalized estimating equations. RESULTS: A total of 135 valid questionnaires were collected. Regarding aesthetic scores for WSLs, OP gave more positive scores than OR and OS (p < .05) towards excessive white spot formation without colouration and were more tolerant than OR (p < .05) towards excessive white spot formation with slight colouration. The level of treatment satisfaction for slight to severe WSLs without cavitation was higher in OP than OR. Patients with higher education levels had more negative scores for aesthetic perception and treatment satisfaction (p < .05). Patients who brushed teeth more frequently scored lower in treatment satisfaction (p < .05). CONCLUSIONS: Orthodontists were the most critical when evaluating aesthetics and treatment satisfaction for slight to severe WSLs without cavitation. For orthodontic patients, better oral hygiene habits and higher education levels were associated with more critical attitudes towards WSLs.
Asunto(s)
Estética Dental , Ortodoncistas , Satisfacción del Paciente , Humanos , Femenino , Masculino , Ortodoncistas/psicología , Adulto , Encuestas y Cuestionarios , Adolescente , Especialidades Odontológicas , Adulto Joven , OrtodonciaRESUMEN
A series of TADF-active compounds: 0D chiral Ln-Ag(I) clusters L-/D-Ln2Ag28-0D (Ln=Eu/Gd) and 2D chiral Ln-Ag(I) cluster-based frameworks L-/D-Ln2Ag28-2D (Ln=Gd) has been synthesized. Atomic-level structural analysis showed that the chiral Ag(I) cluster units {Ag14S12} in L-/D-Ln2Ag28-0D and L-/D-Ln2Ag28-2D exhibited similar configurations, linked by varying numbers of [Ln(H2O)x]3+ (x=6 for 0D, x=3 for 2D) to form the final target compounds. Temperature-dependent emission spectra and decay lifetimes measurement demonstrated the presence of TADF in L-Ln2Ag28-0D (Ln=Eu/Gd) and L-Gd2Ag28-2D. Experimentally, the remarkable TADF properties primarily originated from {Ag14S12} moieties in these compounds. Notably, {Ag14S12} in L-Eu2Ag28-0D and L-Gd2Ag28-2D displayed higher promote fluorescence rate and shorter TADF decay times than L-Gd2Ag28-0D. Combined with theoretical calculations, it was determined that the TADF behaviors of {Ag14S12} cluster units were induced by 4 f perturbation of Ln3+ ions. Specially, while maintaining ΔE(S1-T1) small enough, it can significantly increase k(S1âS0) and reduce TADF decay time by adjusting the type or number of Ln3+ ions, thus achieving the purpose of improving TADF for cluster-based luminescent materials.
RESUMEN
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Neural networks for classification of cervical vertebrae maturation: a systematic review. Mathew R, Palatinus S, Padala S, Alshehri A, Awadh W, Bhandi S, Thomas J, Patil S. Angle Orthod. 2022 Nov 1;92(6):796-804. SOURCE OF FUNDING: No financial support was reported. TYPE OF STUDY/DESIGN: Systematic review.
Asunto(s)
Vértebras Cervicales , Redes Neurales de la Computación , Humanos , Revisiones Sistemáticas como AsuntoRESUMEN
OBJECTIVE: To investigate the antibacterial and enamel remineralization performances as well as physicochemical properties and biocompatibility of a fluoride-coated clear aligner plastic (FCAP). MATERIALS AND METHODS: FCAP and normal clear aligner plastic (CAP) was bought from the manufacturer (Angelalign Technology Inc, China). The FCAP was observed under scanning electron microscopy. Its element composition, resistance to separation, contact angle, and protein adhesion performance were characterized. Colony-forming unit (CFU) count and 3-(4,5)-dimethylthiazol(-z-y1)-3,5-diphenyltetrazolium bromide (MTT) assay were used to evaluate the antibacterial ability of Streptococcus mutans. Fluoride release-recharge patterns were obtained. Apatite formation was evaluated after immersing FCAP in artificial saliva. Enamel remineralization capability was evaluated in the demineralization model (immersing samples in demineralization solution for 36 h) and pH cycling model (immersing samples in demineralization solution and remineralization solution in turns for 14 days). Cell Counting Kit-8 (CCK-8) and live/dead cell staining kits were used for cytotoxicity assay. RESULTS: The FCAP showed uniformly distributed fluoride and did not compromise protein adhesion performance. CFU count (5.47 ± 0.55 for CAP, 3.63 ± 0.38 for FCAP) and MTT assay (0.41 ± 0.025 for CAP, 0.28 ± 0.038) indicated that the FCAP had stronger antibacterial activity compared with normal CAP (P < 0.05 for both evaluations). The FCAP could release fluoride continuously for 14 days and could be recharged after immersing in NaF solution. The FCAP could induce the formation of hydroxyapatite in artificial saliva and could reduce the microhardness decrease, color change, and mineral loss of enamels in both two models (P < 0.05 for all evaluations). CCK-8 and live/dead cell staining analyses showed that the coating did not compromise the biocompatibility of the clear aligner (P > 0.05 for CCK-8 evaluation). CONCLUSIONS: The FCAP had antibacterial, fluoride recharge, and enamel remineralization abilities while it did not compromise physicochemical properties and biocompatibility. CLINICAL RELEVANCE: The FCAP has the potential to prevent enamel demineralization during clear aligner treatment.
Asunto(s)
Caries Dental , Aparatos Ortodóncicos Removibles , Desmineralización Dental , Humanos , Fluoruros/farmacología , Desmineralización Dental/prevención & control , Saliva Artificial , Remineralización Dental , Concentración de Iones de Hidrógeno , Esmalte Dental , Antibacterianos/farmacología , Antibacterianos/uso terapéutico , Caries Dental/prevención & control , Fluoruro de Sodio/farmacología , Cariostáticos/uso terapéuticoRESUMEN
INTRODUCTION: Artificial intelligence (AI) developed rapidly in orthodontics, and AI-based cephalometric applications have been adopted. This study aimed to assess AI-assisted cephalometric technologies related knowledge, experience, and attitude among orthodontists and orthodontic students; describe their subject view of the applications and related technologies in orthodontics; and identify associated factors. METHODS: An online cross-sectional survey based on a professional tool (www.wjx.cn) was performed from October 11-17, 2022. Participants were recruited with a purposive and snowball sampling approach. Data was collected and analyzed with descriptive statistics, chi-square tests, and multivariable generalized estimating equations. RESULTS: Four hundred eighty valid questionnaires were collected and analyzed; 68.8% of the respondents agreed that AI-based cephalometric applications would replace manual and semiautomatic approaches. Practitioners using AI-assisted applications (87.5%) spent less time in cephalometric analysis than the other groups using other approaches, and 349 (72.7%) respondents considered AI-based applications could assist in obtaining more accurate analysis results. Lectures and training programs (56.0%) were the main sources of respondents' knowledge about AI. Knowledge level was associated with experience in AI-related clinical or scientific projects (P <0.001). Most respondents (88.8%) were interested in future AI applications in orthodontics. CONCLUSIONS: Respondents are optimistic about the future of AI in orthodontics. AI-assisted cephalometric applications were believed to make clinical diagnostic analysis more convenient and straightforward for practitioners and even replace manual and semiautomatic approaches. The education and promotion of AI should be strengthened to elevate orthodontists' understanding.
Asunto(s)
Inteligencia Artificial , Ortodoncistas , Humanos , Estudios Transversales , Estudiantes , Encuestas y Cuestionarios , Conocimientos, Actitudes y Práctica en SaludRESUMEN
Three pairs of chiral Ln-Ag(I) clusters d/l-Ln3Ag5 with C3 symmetry were prepared by d/l-penicillamine as multidentate ligand bridged Ln3+ and Ag(I) ions. The chiral ligand induced the molecular cluster to be chiral, and the CD spectra of the chiral compounds d/l-Ln3Ag5 were slightly blue-shifted due to the lanthanide contraction. The studies of optical properties indicated that tunable photoluminescence from {AgS}-to-Ln3+ was achieved by introducing Ln3+ ions with different emission bands or regulating various excitation light.
RESUMEN
A family of nanoclusters, [Ln33(EDTA)12(OAc)2(CO3)4(µ3-OH)36(µ5-OH)4(H2O)38]·OAc·xH2O (x ≈ 50, Ln = Sm for 1; x ≈ 70, Ln = Eu for 2) and [Gd32(EDTA)12(OAc)2(C2O4)(CO3)2(µ3-OH)36(µ5-OH)4(H2O)36]·x(H2O) (x ≈ 70 for 3; H4EDTA = ethylene diamine tetraacetic acid), was prepared through the assembly of repeating subunits under the action of an anion template. The analysis of the structures showed that compounds 1 and 2 containing 33 Ln3+ ions were isostructural, which were constructed by three kinds of subunits in the presence of CO32- as an anion template, while compound 3 had a slightly different structure. Compound 3 containing 32 Gd3+ ions was formed by three types of subunits in the presence of CO32- and C2O42- as a mixed anion template. The CO32- anions came from the slow fixation of CO2 in the air. Meanwhile, one kind of high-nuclearity lanthanide clusters showed high chemical stability. The quantum Monte Carlo (QMC) calculation suggested that weak antiferromagnetic interactions were dominant between Gd3+ ions in 3. Magnetocaloric studies showed that compound 3 had a large entropy change of 43.0 J kg-1 K-1 at 2 K and 7 T. Surprisingly, compound 2 showed excellent recognition and detection effects for permanganate in aqueous solvents based on the fluorescence quenching phenomenon.
RESUMEN
ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Deep learning for cephalometric landmark detection: systematic review and meta-analysis. Schwendicke F, Chaurasia A, Arsiwala L, Lee JH, Elhennawy K, Jost-Brinkmann PG, Demarco F, Krois J. Clin Oral Investig. 2021 Jul;25(7):4299-4309. SOURCE OF FUNDING: This study was self-funded by the authors and their institutions. TYPE OF STUDY/DESIGN: Systematic review and meta-analysis.
Asunto(s)
Aprendizaje Profundo , Humanos , Cefalometría , Algoritmos , RadiografíaRESUMEN
Two new tetrahydrobenzannulated 5,5-spiroketal sesquiterpenes (1 and 2) and three novel benzannulated 5,5-spiroketal sesquiterpenes (3-5) namely angepubesins A-E, together with a new heliannane-type benzannulated sesquiterpene namely angepubesin F (6) and two known monoterpenes (7 and 8), were isolated from the roots of Angelica Pubescens. Their structures were identified by various spectroscopic analyses (NMR, MS, UV, IR), in combination with 13C NMR calculation as well as MAE, CMAE, DP4 + and MAEΔΔδ values analyses. The absolute configurations of 1-6 were determined by modified Mosher's method, ECD calculation and single-crystal X-ray diffraction (Cu Kα). Furthermore, the inhibitory activities of these isolated compounds against nitric oxide (NO) production induced by lipopolysaccharide (LPS) in RAW264.7 macrophage cells were evaluated. The results showed that compounds 2-4, 6 and 7, especially 6, displayed markedly inhibitory effects on NO production in a concentration-dependent manner. Mechanical study revealed that compound 6 could significantly inhibit the expression of nitric oxide synthase (iNOS) protein at a concentration of 10 µM. In addition, compound 6 suppressed the activation of JAK-STAT and NF-κB pathways.
Asunto(s)
Angelica/química , Antiinflamatorios/farmacología , Inhibidores Enzimáticos/farmacología , Extractos Vegetales/farmacología , Sesquiterpenos/farmacología , Compuestos de Espiro/farmacología , Animales , Antiinflamatorios/química , Antiinflamatorios/aislamiento & purificación , Relación Dosis-Respuesta a Droga , Inhibidores Enzimáticos/química , Inhibidores Enzimáticos/aislamiento & purificación , Lipopolisacáridos/antagonistas & inhibidores , Lipopolisacáridos/farmacología , Ratones , Estructura Molecular , Óxido Nítrico/antagonistas & inhibidores , Óxido Nítrico/biosíntesis , Óxido Nítrico Sintasa de Tipo II/antagonistas & inhibidores , Óxido Nítrico Sintasa de Tipo II/metabolismo , Extractos Vegetales/química , Extractos Vegetales/aislamiento & purificación , Raíces de Plantas/química , Células RAW 264.7 , Sesquiterpenos/química , Sesquiterpenos/aislamiento & purificación , Compuestos de Espiro/química , Compuestos de Espiro/aislamiento & purificación , Relación Estructura-ActividadRESUMEN
Late endosomal/lysosomal adaptor and MAPK and mTOR activator 5 (LAMTOR5) is a novel oncoprotein associated with several human malignancies, but its clinical role in head and neck squamous cell carcinoma (HNSCC) remains unclear. The present study aims to investigate the clinical and pathological significance of LAMTOR5 in HNSCC. We utilized immunohistochemical staining of human tissue microarrays (210 primary HNSCC, 42 normal oral mucosae, 69 oral epithelial dysplasia, and 68 metastasis lymph nodes) to explore the clinical and pathological significance of LAMTOR5 in HNSCC. Additionally, expression level of LAMTOR5 in immunoreactivity of Pten conditional knock out (Pten cKO) mice HNSCC was also assessed. We found LAMTOR5 was overexpressed in human and Pten cKO mice HNSCC, and its expression was significantly associated with patients' overall survival, lymph node metastasis and lymph node grade. Furthermore, LAMTOR5 expression was significantly correlated with the expression of p-AktSer473, p-S6Ser235/236, immune checkpoints (PD-L1, Galectin 9, VISTA and B7-H4) and macrophage markers (CD68 and CD163). In Pten cKO mice HNSCC, it was also significantly correlated with VISTA and F4/80. Consequently, we consider that high expression of LAMTOR5 might be a poor prognostic indicator and correlated with the immunosuppression of tumor microenvironment.
Asunto(s)
Proteínas Adaptadoras Transductoras de Señales/metabolismo , Biomarcadores de Tumor/metabolismo , Neoplasias de Cabeza y Cuello/patología , Metástasis Linfática/patología , Carcinoma de Células Escamosas de Cabeza y Cuello/patología , Animales , Modelos Animales de Enfermedad , Femenino , Estudios de Seguimiento , Neoplasias de Cabeza y Cuello/genética , Neoplasias de Cabeza y Cuello/mortalidad , Humanos , Estimación de Kaplan-Meier , Ganglios Linfáticos/patología , Masculino , Ratones Noqueados , Mucosa Bucal/patología , Mucosa Bucal/cirugía , Fosfohidrolasa PTEN/genética , Pronóstico , Carcinoma de Células Escamosas de Cabeza y Cuello/genética , Carcinoma de Células Escamosas de Cabeza y Cuello/mortalidad , Análisis de Matrices TisularesRESUMEN
On-location electrochemical generation of H2 O2 is of great current interest. Herein, selective two-electron reduction of O2 to H2 O2 by a single [NiII (H2 O)6 ]2+ cation that is dynamically associated with a negatively charged metal-organic layer (MOL) by hydrogen bonding and coulombic interactions is reported. In contrast, NiII centers covalently immobilized on the MOL reduce O2 to H2 O in a four- electron process. Oxygen adsorption by [NiII (H2 O)6 ]2+ followed by two-electron reduction generates neutral [NiII (H2 O)4 (OH)(OOH)]0 , which momentarily disconnects from the negatively charged MOL to avoid the injection of additional electrons. Release of H2 O2 from [NiII (H2 O)4 (OH)(OOH)]0 regenerates [NiII (H2 O)6 ]2+ , which regains affinity to the MOL. Such dynamically associated NiII single-metal electrocatalysts ensure high selectivity and represent a new strategy for generating selective catalysts for electrochemical production of important chemicals.
RESUMEN
Powder X-ray diffraction (PXRD) is widely used to study atomic arrangements in ordered materials. The Bragg equation, which describes diffraction of a three-dimensional crystal, fails in two-dimensional (2D) cases. Complete integration of diffraction signals from a continuum instead of discrete directions in the Bragg equation is thus required for proper data interpretation of 2D materials. Furthermore, modeling of preferred orientation of the 2D crystals as well as geometric disorders are also of vital importance. Here, we present a complete integration method in real space (CIREALS) for PXRD simulation of monolayer or multilayer 2D crystals, especially 2D metal-organic layers and 2D covalent organic frameworks. By working in real space instead of reciprocal space, we can readily capture the 2D geometry and preferred orientation of these materials. The predicted PXRD patterns by CIREALS facilitates structure analysis of these new types of 2D material.
RESUMEN
The dimensionality dependency of resonance energy transfer is of great interest due to its importance in understanding energy transfer on cell membranes and in low-dimension nanostructures. Light harvesting two-dimensional metal-organic layers (2D-MOLs) and three-dimensional metal-organic frameworks (3D-MOFs) provide comparative models to study such dimensionality dependence with molecular accuracy. Here we report the construction of 2D-MOLs and 3D-MOFs from a donor ligand 4,4',4â³-(benzene-1,3,5-triyl-tris(ethyne-2,1-diyl))tribenzoate (BTE) and a doped acceptor ligand 3,3',3â³-nitro-4,4',4â³-(benzene-1,3,5-triyl-tris(ethyne-2,1-diyl))tribenzoate (BTE-NO2). These 2D-MOLs and 3D-MOFs are connected by similar hafnium clusters, with key differences in the topology and dimensionality of the metal-ligand connection. Energy transfer from donors to acceptors through the 2D-MOL or 3D-MOF skeletons is revealed by measuring and modeling the fluorescence quenching of the donors. We found that energy transfer in 3D-MOFs is more efficient than that in 2D-MOLs, but excitons on 2D-MOLs are more accessible to external quenchers as compared with those in 3D-MOFs. These results not only provide support to theoretical analysis of energy transfer in low dimensions, but also present opportunities to use efficient exciton migration in 2D materials for light-harvesting and fluorescence sensing.
RESUMEN
A metal-organic layer (MOL) is a new type of 2D material that is derived from metal-organic frameworks (MOFs) by reducing one dimension to a single layer or a few layers. Tetraphenylethylene-based tetracarboxylate ligands (TCBPE), with aggregation-induced emission properties, were assembled into the first luminescent MOL by linking with Zr6 O4 (OH)6 (H2 O)2 (HCO2 )6 clusters. The emissive MOL can replace the lanthanide phosphors in white light emitting diodes (WLEDs) with remarkable processability, color rendering, and brightness. Importantly, the MOL-WLED exhibited a physical switching speed three times that of commercial WLEDs, which is crucial for visible-light communication (VLC), an alternative wireless communication technology to Wi-Fi and Bluetooth, by using room lighting to carry transmitted signals. The short fluorescence lifetime (2.6â ns) together with high quantum yield (50 %) of the MOL affords fast switching of the assembled WLEDs for efficient information encoding and transmission.
RESUMEN
Microenvironments in enzymes play crucial roles in controlling the activities and selectivities of reaction centers. Herein we report the tuning of the catalytic microenvironments of metal-organic layers (MOLs), a two-dimensional version of metal-organic frameworks (MOFs) with thickness down to a monolayer, to control product selectivities. By modifying the secondary building units (SBUs) of MOLs with monocarboxylic acids, such as gluconic acid, we changed the hydrophobicity/hydrophilicity around the active sites and fine-tuned the selectivity in photocatalytic oxidation of tetrahydrofuran (THF) to exclusively afford butyrolactone (BTL), likely a result of prolonging the residence time of reaction intermediates in the hydrophilic microenvironment of catalytic centers. Our work highlights new opportunities in using functional MOLs as highly tunable and selective two-dimensional catalytic materials.
RESUMEN
Metal-organic frameworks (MOFs) with light-harvesting building blocks designed to mimic photosynthetic chromophore arrays in green plants provide an excellent platform to study exciton transport in networks with well-defined structures. A step-by-step exciton random hopping model made of the elementary steps of energy transfer between only the nearest neighbors is usually used to describe the transport dynamics. Although such a nearest neighbor approximation is valid in describing the energy transfer of triplet states via the Dexter mechanism, we found it inadequate in evaluating singlet exciton migration that occurs through the Förster mechanism, which involves one-step jumping over longer distance. We measured migration rates of singlet excitons on two MOFs constructed from truxene-derived ligands and zinc nodes, by monitoring energy transfer from the MOF skeleton to a coumarin probe in the MOF cavity. The diffusivities of the excitons on the frameworks were determined to be 1.8 × 10(-2) cm(2)/s and 2.3 × 10(-2) cm(2)/s, corresponding to migration distances of 43 and 48 nm within their lifetimes, respectively. "Through space" energy-jumping beyond nearest neighbor accounts for up to 67% of the energy transfer rates. This finding presents a new perspective in the design and understanding of highly efficient energy transport networks for singlet excited states.
RESUMEN
A series of quantum dots (QDs) fluorescent probes for the in situ identification of Microthrix parvicella (M. parvicella) in bulking sludge were designed and prepared. In the preparation of CdTe/CdS QDs, the 11-mercaptoundecanoic acid (11-acid) and 16-mercaptohexadecanoic acid (16-acid) were used as the stabilizer. The prepared QDs probes were characterized by Fourier transform infrared (FT-IR), X-ray diffraction (XRD), and transmission electron microscopy (TEM), and the results showed that the CdTe/CdS QDs formed a core-shell structure and the long carbon chain was successfully grafted onto its surface. And the three QDs probes had different crystallinity and particle size, which was due to the inhibition effect of long carbon chain. The optical properties test results showed that although the formed core-shell structure and long carbon chain affected the fluorescent intensity, adsorption, and emission spectra of the QDs probes, the probes B and C had a large stokes-shift of 82 and 101 nm, which was a benefit for their fluorescent labeling property. In the fluorescent identification of M. parvicella, the probes B and C effectively adsorbed onto the surface of M. parvicella through a hydrophobic bond, and then identified M. parvicella by their unique fluorescence. In addition, it was found that a better hydrophobic property resulted in better identification efficiency.
Asunto(s)
Actinobacteria/clasificación , Actinobacteria/aislamiento & purificación , Colorantes Fluorescentes , Hibridación Fluorescente in Situ/métodos , Puntos Cuánticos , Aguas del Alcantarillado/microbiología , Cristalización , Ácidos Grasos , Interacciones Hidrofóbicas e Hidrofílicas , Microscopía Electrónica de Transmisión , Ácidos Palmíticos , Tamaño de la Partícula , Espectroscopía Infrarroja por Transformada de Fourier , Compuestos de Sulfhidrilo , Telurio , Difracción de Rayos XRESUMEN
Although the fluorescent in situ hybridization (FISH) has been widely used to identify the Microthrix parvicella (M. parvicella), there are a few disadvantages and difficulties, such as complicated process, time consuming, etc. In this work, a series of fluorescent probes, which were modified by long-chain alkane with hydrophobic property and based on the property of M. parvicella utilizing long-chain fatty acids (LCFA), for the labeling of M. parvicella in bulking sludge were designed, synthesized, and characterized. The probes were characterized by ultraviolet-visible (UV-Vis) absorption spectra, fluorescence spectra, (1)H NMR spectra, and mass spectra, and the photostability and hydrophobic property of probes were investigated. All the results showed that the probes were quite stable and suitable for the fluorescent labeling. The probes had a large stoke shift of 98-137 nm, which was benefit for the fluorescent labeling. In the fluorescent labeling of M. parvicella by the synthesized probes, the probes had excellent labeling effects. By comparison of the images and the Image Pro Plus 6.0 analysis, the optimal concentration of the probes in the activated sludge sample for labeling was 0.010 mmol/L and the probe 3d had the best labeling. In addition, the effect of the duration time of probes was also investigated, and the results showed that the fluorescent intensity of probes hardly changed in a long period of time and it was suitable for labeling.
Asunto(s)
Actinobacteria/metabolismo , Alcanos/síntesis química , Alcanos/metabolismo , Colorantes Fluorescentes/síntesis química , Colorantes Fluorescentes/metabolismo , Coloración y Etiquetado/métodos , Alcanos/química , Ácidos Grasos/química , Ácidos Grasos/metabolismo , Colorantes Fluorescentes/química , Análisis EspectralRESUMEN
Metal-organic layers (MOLs) represent an emerging class of tunable and functionalizable two-dimensional materials. In this work, the scalable solvothermal synthesis of self-supporting MOLs composed of [Hf6O4(OH)4(HCO2)6] secondary building units (SBUs) and benzene-1,3,5-tribenzoate (BTB) bridging ligands is reported. The MOL structures were directly imaged by TEM and AFM, and doped with 4'-(4-benzoate)-(2,2',2''-terpyridine)-5,5''-dicarboxylate (TPY) before being coordinated with iron centers to afford highly active and reusable single-site solid catalysts for the hydrosilylation of terminal olefins. MOL-based heterogeneous catalysts are free from the diffusional constraints placed on all known porous solid catalysts, including metal-organic frameworks. This work uncovers an entirely new strategy for designing single-site solid catalysts and opens the door to a new class of two-dimensional coordination materials with molecular functionalities.
RESUMEN
The aim of this paper is to develop a novel method to separate Microthrix parvicella (M. parvicella) filaments from activated sludge easily and quickly, as there are a few difficulties in the isolation of M. parvicella filaments, such as complicated isolation process, time consuming, etc. In this work, a series of hydrophobic plate with and without microchannels have been prepared for the separation of M. parvicella filaments. The results showed that the presence of microchannels and hydrophobic property of the hydrophobic plates affected the separation efficiency of M. parvicella significantly. The scanning electron microscope and Keyence Digital Microscope analysis results showed that the diameter of microchannels was similar to the width of M. parvicella filament, which was beneficial for the fastening of M. parvicella filaments on the plate. The hydrophobic property of the prepared plates was tested by contact angle of water droplets, and the results displayed that the polydimethylsiloxane (PDMS) plate possessed the highest contact angle compared with that of other plates, like polymethylmethacrylate, polystyrene plate, and PDMS plate with no hydrophobic microchannels. Thus, it was concluded that the high separation efficiency of PDMS plates to M. parvicella filaments was due to its best hydrophobic property.