Crystalline silica exposure in patients with rheumatoid arthritis and systemic sclerosis: a nationwide cross-sectional survey.

OBJECTIVES: Develop and validate a thorough exposure questionnaire to comprehensively explore crystalline silica (SiO2) exposure in the general population (gender-specific, occupational and non-occupational) and in patients with autoimmune diseases (rheumatoid arthritis (RA), systemic sclerosis (SSc)). METHODS: Lifetime exposures to SiO2 in occupational and non-occupational settings were assessed using a thorough exposure questionnaire. The questionnaire was applied to a general population panel (n = 2911) sampled from the French rolling census, and to unselected patients with SSc (n = 100) and RA (n = 97). Global (GES), occupational (OES) and non-occupational (NOES) exposure scores were assessed in SSc and RA patients, and compared with up to four controls from the general population, matched by age group, sex and tobacco consumption. RESULTS: Patients had higher GES than their matched controls (SSc: P = 0.001; RA: P < 0.0001) due to higher OES (P < 0.0001 for SSc and RA). Men had higher GES than women (SSc: P < 0.0001; RA: P = 0.002) due to higher OES (P < 0.0001 for SSc and RA). The NOES did not differ between men and women. In SSc patients: Men had higher GES than controls (P < 0.0001). Men and women with SSc had higher OES than controls (P < 0.0001). In RA patients: GES and OES were higher in both men (P = 0.00521; P < 0.0001) and women (P < 0.0001; P < 0.0001) than in their respective controls. Women had higher NOES than controls (P = 0.045). CONCLUSION: The lifetime SiO2 exposure gap between RA and SSc patients and controls was substantially due to occupational exposure. In both diseases, men had higher exposure scores than women.

Exposure to inorganic particles in paediatric sarcoidosis: the PEDIASARC study.

Inorganic antigens may contribute to paediatric sarcoidosis. Thirty-six patients matched with 36 healthy controls as well as a group of 21 sickle-cell disease (SCD) controls answered an environmental questionnaire. Patients' indirect exposure to inorganic particles, through coresidents' occupations, was higher than in healthy and SCD controls (median score: 2.5 (0.5-7) vs 0.5 (0-2), p=0.003 and 1 (0-2), p=0.012, respectively), especially for construction, exposures to metal dust, talc, abrasive reagents and scouring products. Wood or fossil energies heating were also linked to paediatric sarcoidosis. This study supports a link between mineral environmental exposure due to adult coresident occupations and paediatric sarcoidosis.

Metal-Metal Hip Prosthesis and Kidney Cancer: Assumed Role of Chromium and Cobalt Overload.

BACKGROUND The case of a patient with bilateral renal cancers diagnosed at 94 and 120 months after metal-on-metal hip placement may serve as a warning. It suggests that there may be a need for kidney echography observation of patients with similar types of prostheses. CASE REPORT A 61-year-old woman received a metal-on-metal hip prosthesis for degenerative arthritis in January 2007. In November 2014, after bleeding from the renal tract, she was diagnosed with clear cell carcinoma of the right kidney. When she returned to her orthopaedic surgeon 1 year later, a blood test showed a serum cobalt level that exceeded the French medical agency recommendation. After the patient's metallic acetabulum was replaced in September 2015, her blood cobalt level fell. However, in February 2017, she was diagnosed with adenocarcinoma of the left kidney. Laser-induced breakdown spectroscopy (LIBS) showed cobalt, chromium, and silica overload in both the patient's kidneys despite the drop in serum levels. CONCLUSIONS In this case, exposure to a cobalt-chromium implant with high particulate wear, LIBS results showing chromium overload of the kidneys, diagnosis of renal cancer at 7 years, 10 months and 10 years in a patient with a metal-on-metal hip prosthesis suggests that there may be a causal relationship between the implant, carcinogenic chromium intoxication, and development of renal cancer.

Desquamative interstitial pneumonia induced by metal exposure. A case report and literature review.

BACKGROUND: Forms of interstitial pneumonia secondary to exposure to an air-contaminant are varied and so far, insufficiently described. OBJECTIVES/METHODS: We report here a case of a 57-year-old patient managed in our department for the exploration of MRC grade 2 dyspnoea and interstitial pneumonia. He mentioned multiple occupational and domestic exposures such as hens' excrements, asbestos and metal particles; he also had a previous history of smoking. RESULTS: High-resolution computed tomography showed ground glass opacities predominating in posterior territories and surrounding cystic lesions or emphysematous destruction. The entire etiological assessment revealed only macrophagic alveolitis with giant multinucleated cells on the bronchoalveolar lavage. A surgical lung biopsy allowed us to refine the diagnosis with evidence of desquamative interstitial pneumonia and pulmonary granulomatosis. Finally, the analysis of the mineral particles in the biopsy revealed abnormally high rates of Zirconium and Aluminium. We were therefore able to conclude to a desquamative interstitial pneumonia associated with pulmonary granulomatosis linked to metal exposure (Aluminium and Zirconium). The clinical, functional and radiological evolution was favorable after a systemic corticosteroid treatment with progressive decay over one year. CONCLUSION: This presentation reports the first case to our knowledge of desquamative interstitial pneumonitis related to exposure to Zirconium and the third one in the context of Aluminium exposure. The detailed analysis of the mineral particles present on the surgical lung biopsy allows for the identification of the relevant particle to refine the etiological diagnosis, to guide the therapeutic management and to give access to recognition as an occupational disease. (Sarcoidosis Vasc Diffuse Lung Dis 2020; 37 (1): 79-84).

Identification of inorganic particles resulting from degradation of ESSURE® implants: Study of 10 cases.

OBJECTIVE: Approximately 750,000 women worldwide have undergone ESSURE hysteroscopic sterilization since 2002. In 2015, an increase in adverse effects was noted, with gynaecological and systemic symptoms reported. Scanning electron microscopy (SEM) analysis of fallopian tube and uterine horn tissues and implants, after hysterectomy or salpingectomy, revealed the presence of inorganic particles resulting from implant degradation. STUDY DESIGN: Ten patients (age 42-53 years) were included in this study. Of these, eight patients had undergone hysterectomy and two patients had undergone salpingectomy. Mean exposure time was 85.5 months (standard deviation 26.8 months, range 34-105 months). Mineralogical analyses were performed on 13 tissue biopsies and four implants by SEM coupled with energy dispersive x-ray spectrometry. RESULTS: In five of the 10 patients, tin particles were observed in fallopian tube or uterine horn tissues with inflammatory cell reactions. In the other five cases, iron, chromium, nickel or platinum particles were observed. For implants, major deterioration of the weld zone was observed with either destroyed appearance or the presence of an organic coating containing numerous particles. DISCUSSION AND CONCLUSION: Analysis of the preclinical studies performed by the manufacturer suggests that degradation of the tin weld plays a major role in these adverse events, with increasing leaching and corrosion between 3 and 6 months for an intratubal insert that si designed to remain in an woman's body for her entire life. For patients with gynaecological symptoms (e.g. pain, metrorragies) needing explantation, these findings raise the question of a causal relationship between tin particles from implant degradation and the inflammatory tissue response. For patients with systemic symptoms (e.g. blurred vision, headache, asthenia, myalgia), the hypothesis that these symptoms may be related to the formation of organotin (chemical compounds based on tin with hydrocarbon substituents) in the body has yet to be proven. Tin levels in blood have to be measured before and after explantation. To the authors' knowledge, this is the first study to report significant degradation of the ESSURE implant weld, evidenced by the detection of tin particles in the uterine tissue of patients and comparison of the welding zone between unused and used implants.

Sarcoidosis, inorganic dust exposure and content of bronchoalveolar lavage fluid: the MINASARC pilot study.

Inhalation of mineral dust was suggested to contribute to sarcoidosis. We compared the mineral exposome of 20 sarcoidosis and 20 matched healthy subjects. Bronchoalveolar lavage (BAL) samples were treated by digestion-filtration and analyzed by transmission electron microscopy. The chemical composition of inorganic particles was determined by energy-dispersive X-ray (EDX) spectroscopy. Dust exposure was also assessed by a specific questionnaire. Eight sarcoidosis patients and five healthy volunteers had a high dust load in their BAL. No significant difference was observed between the overall inorganic particle load of each group while a significant higher load for steel was observed in sarcoidosis patients (p=0.029). Moreover, the building activity sub-score was significantly higher in sarcoidosis patients (p=0.018). These results suggest that building work could be a risk factor for sarcoidosis which could be considered at least in some cases as a granulomatosis caused by airborne inorganic dust. The questionnaire should be validated in larger studies. (Sarcoidosis Vasc Diffuse Lung Dis 2018; 35: 327-332).

Metal exposure in cows grazing pasture contaminated by iron industry: Insights from magnetic particles used as tracers.

Magnetic particles (MP) emitted by an iron smelter were used to investigate the exposure of cows grazing on a grassland polluted by these MP and by large amounts of potentially toxic elements (PTE). The morphology as well as the chemical composition of the MP separated from cow dung were studied. Large amounts of typical MP were found (1.1 g kg(-1) dry weight) in the cow dung sampled from the exposed site, whereas these particles were absent from the reference unpolluted site. The ingested MP were mainly technogenic magnetic particles (TMP) emitted by the smelter. Considering the MP concentration in the grazed grass on the exposed site, it was concluded that cows absorb the MP not only from the grass but also from the soil surface. The results of a mild acidic leaching of the MP suggested that the particles were possibly submitted to a superficial dissolution in the abomasum, pointing at a potential route of transfer of the PTE originating from the TMP and leading into food chains. TMP were only a small part of the anthropogenic contamination having affected the soil and the dung. However, due to their unequivocal signature, TMP are a powerful tracer of the distribution of PTE in the different compartments constituting the food chains and the ecosystems. Furthermore, the measurement of the particle sizes gave evidence that a noticeable proportion of the MP could enter the respiratory tract.

Polishing surgical metal pieces, granulomatosis and mineralogical analysis.

This report describes the case of a 44-year-old man with pulmonary nodules whose histological analysis initially suggested tuberculosis. The Mycobacterium tuberculosis (MT) culture was negative and a questionnaire revealed a professional activity of brushing and polishing surgical instruments without any protection for 7 years.  A mineralogical analysis by optical and electron microscopy was performed on both a healthy lung tissue biopsy and a lung nodule in a paraffin block. Electron microscopy analysis revealed the presence of metal particles (iron oxide, titanium oxide, aluminum oxide and steel) in both samples. This study suggests that mineralogical analysis combined with a questionnaire on dust exposure could help redirect the diagnosis of a dust-related disease.

Isolation of technogenic magnetic particles.

Technogenic magnetic particles (TMPs) emitted by various industrial sources, such as smelting plants, end up after atmospheric transfer on the soil surface. In the present study, we characterised the origin and composition of such particles emitted by a large iron smelting plant and deposited on particular substrates, namely tombstones, which act as a very interesting and appropriate matrix when compared to soil, tree bark, lichens or attic dust. The isolation and subsequent description of TMPs require a critical step of separation between different components of the sample and the magnetic particles; here, we described an efficient protocol that fulfils such a requirement: it resorts to water suspension, sonication, repeated magnetic extraction, sedimentation, sieving and organic matter destruction at 550 °C in some instances. The isolated TMPs displayed a noticeable crystalline shape with variable compositions: a) pure iron oxides, b) iron+Cr, Ni or Zn, and c) a complex structure containing Ca, Si, Mg, and Mn. Using Scanning Electron Microscope Energy Dispersive X-ray (SEM-EDX), we obtained profiles of various and distinct magnetic particles, which allowed us to identify the source of the TMPs.

The inclusion of atmospheric particles into the bark suber of ash trees.

A slow deposition of atmospheric components occurs on tree barks. One part of them can be incorporated into bark tissues. This work demonstrates that mineral particles are present inside the suber tissue in four-year-old ash tree stems. Most of these particles are smaller than 2 microm. Scanning electronic microscope studies - using energy dispersive X-ray spectroscopy (SEM-EDX) - on stem cuttings show that they are located either inside the dead suber cells or between these cells. Numerous particles are composed of clay, quartz, feldspar or mica. Others, clearly of anthropogenic origin, are metallic fragments composed of Fe, Ni, Cr, Pb, etc. Spherical fly ashes were found, composed of Si, Al or Fe, and demonstrating an anthropogenic formation. Such particles were isolated and purified from suber ashes obtained at 550 degrees C, after aqueous and acidic treatments, and their composition was established through SEM-EDX. These results reinforce the idea that the suber of tree barks alone can be considered as archives for atmospheric deposition.