RESUMEN
Fibrous particles interact with cells and organisms in complex ways that can lead to cellular dysfunction, cell death, inflammation, and disease. The development of conductive transparent networks (CTNs) composed of metallic silver nanowires (AgNWs) for flexible touchscreen displays raises new possibilities for the intimate contact between novel fibers and human skin. Here, we report that a material property, nanowire-bending stiffness that is a function of diameter, controls the cytotoxicity of AgNWs to nonimmune cells from humans, mice, and fish without deterioration of critical CTN performance parameters: electrical conductivity and optical transparency. Both 30- and 90-nm-diameter AgNWs are readily internalized by cells, but thinner NWs are mechanically crumpled by the forces imposed during or after endocytosis, while thicker nanowires puncture the enclosing membrane and release silver ions and lysosomal contents to the cytoplasm, thereby initiating oxidative stress. This finding extends the fiber pathology paradigm and will enable the manufacture of safer products incorporating AgNWs.
Asunto(s)
Endosomas/metabolismo , Fibroblastos/efectos de los fármacos , Lisosomas/metabolismo , Nanocables/toxicidad , Animales , Línea Celular , Células Cultivadas , Conductividad Eléctrica , Fibroblastos/metabolismo , Peces , Humanos , Ratones , Nanocables/química , Estrés Oxidativo , Plata/químicaRESUMEN
Whereas the integration of silver nanowires in functional devices has reached a fair level of maturity, the integration of copper nanowires still remains difficult, mainly due to the intrinsic instability of copper nanowires in ambient conditions. In this paper, copper nanowire based transparent electrodes with good performances (33 Ω sq-1 associated with 88% transparency) were obtained, and their degradation in different conditions was monitored, in particular by electrical measurements, transmission electron microscopy, x-ray photoelectron spectrometry and Auger electron spectroscopy. Several routes to stabilize the random networks of copper nanowires were evaluated. Encapsulation through laminated barrier film with optical clear adhesive and atmospheric pressure spatial atomic layer deposition were found to be efficient and were used for the fabrication of transparent film heaters.
RESUMEN
Advancement in the science and technology of random metallic nanowire (MNW) networks is crucial for their appropriate integration in many applications including transparent electrodes for optoelectronics and transparent film heaters. We have recently highlighted the discontinuous activation of efficient percolating pathways (EPPs) for networks having densities slightly above the percolation threshold. Such networks exhibit abrupt drops of electrical resistance when thermal or electrical annealing is performed, which gives rise to a "geometrically quantized percolation". In this Letter, lock-in thermography (LiT) is used to provide visual evidence of geometrical quantized percolation: when low voltage is applied to the network, individual "illuminated pathways" can be detected, and new branches get highlighted as the voltage is incrementally increased. This experimental approach has allowed us to validate our original model and map the electrical and thermal distributions in silver nanowire (AgNW) networks. We also study the effects of electrode morphology and wire dimensions on quantized percolation. Furthermore, we demonstrate that the network failure at high temperature can also be governed by a quantized increase of the electrical resistance, which corresponds to the discontinuous destruction of individual pathways (antipercolation). More generally, we demonstrate that LiT is a promising tool for the detection of conductive subclusters as well as hot spots in AgNW networks.
RESUMEN
Transparent electrodes attract intense attention in many technological fields, including optoelectronic devices, transparent film heaters and electromagnetic applications. New generation transparent electrodes are expected to have three main physical properties: high electrical conductivity, high transparency and mechanical flexibility. The most efficient and widely used transparent conducting material is currently indium tin oxide (ITO). However the scarcity of indium associated with ITO's lack of flexibility and the relatively high manufacturing costs have a prompted search into alternative materials. With their outstanding physical properties, metallic nanowire (MNW)-based percolating networks appear to be one of the most promising alternatives to ITO. They also have several other advantages, such as solution-based processing, and are compatible with large area deposition techniques. Estimations of cost of the technology are lower, in particular thanks to the small quantities of nanomaterials needed to reach industrial performance criteria. The present review investigates recent progress on the main applications reported for MNW networks of any sort (silver, copper, gold, core-shell nanowires) and points out some of the most impressive outcomes. Insights into processing MNW into high-performance transparent conducting thin films are also discussed according to each specific application. Finally, strategies for improving both their stability and integration into real devices are presented.
RESUMEN
The class of materials combining high electrical or thermal conductivity, optical transparency and flexibility is crucial for the development of many future electronic and optoelectronic devices. Silver nanowire networks show very promising results and represent a viable alternative to the commonly used, scarce and brittle indium tin oxide. The science and technology research of such networks are reviewed to provide a better understanding of the physical and chemical properties of this nanowire-based material while opening attractive new applications.
RESUMEN
Transparent flexible electrodes made of metallic nanowires, and in particular silver nanowires (AgNWs), appear as an extremely promising alternative to transparent conductive oxides for future optoelectronic devices. Though significant progresses have been made the last few years, there is still some room for improvement regarding the synthesis of high quality silver nanowire solutions and fabrication process of high performance electrodes. We show that the commonly used purification process can be greatly simplified through decantation. Using this process it is possible to fabricate flexible electrodes by spray coating with sheet resistance lower than 25 Ω sq⻹ at 90% transparency in the visible spectrum. These electrodes were used to fabricate an operative transparent flexible touch screen. To our knowledge this is the first reported AgNW based touch sensor relying on capacitive technology.
Asunto(s)
Electrodos , Electrónica/instrumentación , Nanocables/química , Nanocables/ultraestructura , Plata/química , Tacto , Transductores , Cristalización/métodos , Módulo de Elasticidad , Capacidad Eléctrica , Diseño de Equipo , Análisis de Falla de Equipo , Ensayo de Materiales , Tamaño de la Partícula , Refractometría , Estrés Mecánico , Propiedades de SuperficieRESUMEN
The directed assembly of nanomaterials into 3D architectures is a powerful tool to produce macroscopic materials with tailored physical properties. We show in this article that such a process can be advantageously performed for the fabrication of lightweight electrically conductive materials. Silver nanowire aerogels (AgNWAs) with very low densities (down to â¼6 mg cm-3) were ice-templated and freeze-dried, leading to 3D shaped cellular materials based on one-dimensional nanoscopic building blocks. Due to their intrinsic moderate mechanical resistance, the potential use of pure AgNWAs in real life applications appears rather limited. We demonstrate that the addition of carboxymethylcellulose (CMC) in a 1:1 weight ratio leads to the fabrication of hybrid aerogels with highly improved mechanical properties. The molecular weight of the CMC is shown to be a critical parameter to ensure a good dispersion of the AgNWs, and thus to reach excellent performances such as a very low resistivity (0.9 ± 0.2 Ω·cm at 99.2 vol % porosity). The combination of silver nanowires with CMC-700k results in a gain higher than 7100% of the Young's modulus, from 10.4 ± 0.9 kPa (at very low density, i.e., 12 mg cm-3) for the AgNWAs to 740 ± 40 kPa for the AgNW:CMC aerogel. Electromechanical characterizations allowed us to quantify the piezoelectric properties of these hybrid aerogels. The very good elasticity and the piezoelectric behavior stability up to 100 cycles of compression under high (50%) deformation were revealed, which may be of interest for various applications such as pressure sensors.
RESUMEN
This article reports on the fabrication and investigation of low-emissivity (low-E) coatings based on random networks of silver nanowires (AgNWs). The transparent layers based on AgNWs do exhibit low emissivity while being still transparent: an overall emissivity as low as 0.21 at 78% total transmittance was obtained. A simple physical model allows to rationalize the emissivity-transparency dependence and a good agreement with experimental data is observed. This model demonstrates the role played by AgNWs which partially reflect IR photons emitted by the substrate, exacerbating then the presence of AgNWs and lowering the total emissivity. The potential use of such layers in functional devices is hampered by the poor intrinsic surface adhesion of the AgNWs, which renders the coating fragile and prone to mechanical damaging. Two very efficient encapsulation processes based on the deposition of a conformal alumina thin film using the spatial atomic layer deposition technique and the solution processed layer deposition of a polysiloxane varnish have been developed to thwart this weakness. Both coatings combine sturdy mechanical resistance relying on a strong interfacial adhesion and excellent optical transmittance properties. The performances for the mechanically resistant low-E coatings achieve an overall emissivity as low as 0.34 at 74% total transparency. The set of optical properties and mechanical resistance of the reported AgNWs based low-E coatings combined with the ease of fabrication and the cost-effective production process make it an excellent candidate for a wide set of applications, including smart windows for energy-saving buildings.
RESUMEN
Electrical stability and homogeneity of silver nanowire (AgNW) networks are critical assets for increasing their robustness and reliability when integrated as transparent electrodes in devices. Our ability to distinguish defects, inhomogeneities, or inactive areas at the scale of the entire network is therefore a critical issue. We propose one-probe electrical mapping (1P-mapping) as a specific simple tool to study the electrical distribution in these discrete structures. 1P-mapping has allowed us to show that the tortuosity of the voltage equipotential lines of AgNW networks under bias decreases with increasing network density, leading to a better electrical homogeneity. The impact of the network fabrication technique on the electrical homogeneity of the resulting electrode has also been investigated. Then, by combining 1P-mapping with electrical resistance measurements and IR thermography, we propose a comprehensive analysis of the evolution of the electrical distribution in AgNW networks when subjected to increasing voltage stresses. We show that AgNW networks experience three distinctive stages: optimization, degradation, and breakdown. We also demonstrate that the failure dynamics of AgNW networks at high voltages occurs through a highly correlated and spatially localized mechanism. In particular the in situ formation of cracks could be clearly visualized. It consists of two steps: creation of a crack followed by propagation nearly parallel to the equipotential lines. Finally, we show that current can dynamically redistribute during failure, by following partially damaged secondary pathways through the crack.
RESUMEN
A process to synthesize continuous conducting nanofibers were developed using PEDOT:PSS as a conducting polymer and an electrospinning method. Experimental parameters were carefully explored to achieve reproducible conductive nanofibers synthesis in large quantities. In particular, relative humidity during the electrospinning process was proven to be of critical importance, as well as doping post-treatment involving glycols and alcohols. The synthesized fibers were assembled as a mat on glass substrates, forming a conductive and transparent electrode and their optoelectronic have been fully characterized. This method produces a conformable conductive and transparent coating that is well-adapted to nonplanar surfaces, having very large aspect ratio features. A demonstration of this property was made using surfaces having deep trenches and high steps, where conventional transparent conductive materials fail because of a lack of conformability.
Asunto(s)
Sustancias para la Guerra Química/análisis , Nanotubos/química , Compuestos Organofosforados/análisis , Silicio/química , Transistores Electrónicos , Sustancias para la Guerra Química/química , Cristalografía por Rayos X , Gases/química , Microscopía de Fuerza Atómica , Conformación Molecular , Compuestos Organofosforados/químicaRESUMEN
Flexible transparent electrodes fabricated with random networks of silver nanowires (AgNWs) have been widely studied in recent years. This approach appears to be a promising alternative to replace ITO (indium tin oxide) in many optoelectronic applications. Many successful integrations in functional devices have already evidenced the high potential of this technology, but unfortunately only very few studies have been dedicated so far to the stability of this material. We present here a study dealing with the alteration of the electrical properties of AgNW meshes when subjected to different stresses. We demonstrate that AgNW electrodes are very stable when stored under ambient atmosphere up to, at least, two and a half years. Accelerated ageing processes also reveal that concentrated H2S or exposure to light does not cause any significant sheet resistance modification. However, the combination of high relative humidity and high temperature seems to be more critical. In addition, long lasting contact (two years) with PEDOT:PSS can induce deterioration of the electrical properties. Similarly, AgNW/PEDOT:PSS hybrid materials exhibit weaker stability under electrical stress when compared to pristine AgNW networks.
RESUMEN
Organic photodetectors with inverted structure are fabricated by solution process techniques. A very thin interfacing layer of polyethyleneimine leads to a homogenous interface with low work function. The devices exhibit excellent performances, in particular in terms of low dark current density, wide range linearity, high detectivity, and remarkable stability in ambient air without encapsulation.
RESUMEN
The ability to detect minute traces of chemical warfare agents is mandatory both for military forces and homeland security. Various detectors based on different technologies are available but still suffer from serious drawbacks such as false positives. There is still a need for the development of innovative reliable sensors, in particular for organophosphorus nerve agents like Sarin. We report herein on the fabrication of a portable, battery-operated, microprocessor-based prototype sensor system relying on silicon nanowire field-effect transistors for the detection of nerve agents. A fast, supersensitive and highly selective detection of organophosphorus molecules is reported. The results show also high selectivity in complex mixtures and on contaminated materials.
Asunto(s)
Nanocables , Pironas/análisis , Semiconductores , Silicio , Electrodos , Límite de Detección , Microscopía Electrónica de Rastreo , PolímerosRESUMEN
The electrical conduction properties of lateral and vertical silicon nanowires (SiNWs) were investigated using a conductive-probe atomic force microscopy (AFM). Horizontal SiNWs, which were synthesized by the in-plane solid-liquid-solid technique, are randomly deployed into an undoped hydrogenated amorphous silicon layer. Local current mapping shows that the wires have internal microstructures. The local current-voltage measurements on these horizontal wires reveal a power law behavior indicating several transport regimes based on space-charge limited conduction which can be assisted by traps in the high-bias regime (> 1 V). Vertical phosphorus-doped SiNWs were grown by chemical vapor deposition using a gold catalyst-driving vapor-liquid-solid process on higly n-type silicon substrates. The effect of phosphorus doping on the local contact resistance between the AFM tip and the SiNW was put in evidence, and the SiNWs resistivity was estimated.
RESUMEN
We report on the VLS (vapour-liquid-solid) fabrication and characterization of in situ axially doped silicon nanowires (SiNWs) at both ends, and on their integration into a bottom gate-top contact geometry on both rigid and flexible substrates to realize field-effect transistors (FETs). To improve contact resistance between SiNWs and source/drain electrodes, we axially tuned the level of doping at both ends of the SiNWs by sequential in situ addition of PH(3). Characterisation of SiNWs by scanning spreading resistance microscopy in the device configuration allowed us to determine precisely the different sections of the SiNWs. The transfer to flexible substrates still allowed for workable FET structures. Transistors with electron mobilities exceeding 120 cm(2) V(-1) s(-1), I(on)/I(off) ratios greater than 10(7) and ambipolar behaviour were achieved.
Asunto(s)
Nanocables/química , Silicio/química , Transistores Electrónicos , Electrodos , Níquel/química , Titanio/químicaRESUMEN
The first results on a simple new process for the direct fabrication of one-dimensional superlattices using common CVD chambers are presented. The experiments were carried out in a 200 mm industrial Centura reactor (Applied Materials). Low dimensionality and superlattices allow a significant increase in the figure of merit of thermoelectrics by controlling the transport of phonons and electrons. The monocrystalline nanowires produced according to this process are both one-dimensional and present heterostructures, with very thin layers (40 nm) of Si and SiGe. Concentrations up to 30 at.% Ge were obtained in the SiGe parts. Complementary techniques including transmission electronic microscopy (TEM), selected area electron diffraction (SAED), energy dispersive x-ray spectroscopy (EDS), scanning transmission electron microscopy (STEM) in bright field and high angle annular dark field (HAADF STEM), and energy-filtered transmission electron microscopy (EF-TEM) were used to characterize the nanoheterostructures.