RESUMEN
Techniques for wavefront improvement in an end-pumped Nd:YAG zigzag slab laser amplifier were proposed and demonstrated experimentally. First, a study on the contact materials was conducted to improve the heat transfer between the slab and cooling blocks and to increase the cooling uniformity. Among many attempts, only the use of silicon oil showed an improvement in the wavefront. Thus, the appropriate silicone oil was applied to the amplifier as a contact material. In addition, the wavefront compensation method using a glass rod array was also applied to the amplifier. A very low wavefront distortion was obtained through the use of a silicone-oil contact and glass rod array. The variance of the optical path difference for the entire beam height was 3.87 µm at a pump power of 10.6 kW, and that for the 80% section was 1.69 µm. The output power from the oscillator was 3.88 kW, which means the maximum output extracted from the amplifier at a pump power of 10.6 kW.
RESUMEN
We fabricated and analyzed the output power and polarization characteristics of an efficient diode-side-pumped Nd:YAG rod laser with a diffusive optical cavity. The resonator stability conditions are analyzed graphically in the symmetric and asymmetric configurations for a plane-parallel resonator. On the basis of an analysis of the stability condition and mode size for the r and theta polarizations, we clarify how the stable laser operation is possible for various resonator configurations. In particular, we show that the critical stability region of around g1*g2* = 0 provides a stable resonator in the symmetric resonator, even with a slight asymmetry. Experimentally, the output power and polarization characteristics are confirmed in association with the resonator stability condition.
RESUMEN
A ray-tracing code has been developed, and the design parameters of the laser pump head were analyzed in terms of crystal diameter, doping concentration, and optical cavity diameter. According to the numerical analysis, we fabricated an efficient diode-pumped Nd:YAG laser and experimentally obtained 500-W output power. The output power is close to the numerically calculated output power of approximately 450 W and corresponds to an optical-to-optical conversion efficiency of 46.7% and an optical slope efficiency of 49%.
RESUMEN
Using a ray matrix method, we analyze theoretically how the r and theta polarizations affect the resonator stability condition of two laser heads with or without thermal birefringence compensation. The resonator stability condition is analyzed graphically for a plane-parallel and a concave-concave resonator. The maximum range of stable region is found for both the short and the long cavity. The characteristics of the laser output power are confirmed experimentally in association with the resonator stability condition. The laser output power of 776 W is obtained with the optical-to-optical efficiency of 45% for a plane-parallel resonator with a short crystal separation.