Off-Stoichiometry of Sodium Iron Pyrophosphate as Cathode Materials for Sodium-Ion Batteries with Superior Cycling Stability.

As one of the important devices for large-scale electrochemical energy storage, sodium-ion batteries have received much attention due to the abundant resources of raw materials. However, whether it is a base station power source, an energy storage power station, or a start-stop power supply, long energy cycle life (more than 5000 cycles), high stability, and safety performance are application prerequisites. Regrettably, currently, few sodium-ion batteries can meet this requirement, mainly due to shortcomings in positive electrode performance. We report a sufficiently stable sodium-ion battery cathode material, Na2Fe0.95P2O7, that retains 97.5% capacity after 5000 charge/discharge cycles. The use of nonstoichiometry in the lattice enables simultaneous modification of the crystal and electronic structure, promoting Na2Fe0.95P2O7 to be extremely stable while still being able to achieve a capacity of 92 mAh g-1 and stable cycling at high temperatures up to 60 °C. Our results confirm the positive effect of nonstoichiometric ratios on the performance of Na2Fe0.95P2O7 and provide a reliable idea to promote the practical application of sodium-ion batteries.

[Research status and rapid detection methods of antibiotic residues in agricultural products]. / å†œäº§å“æŠ—ç”Ÿç´ æ®‹ç•™çŽ°çŠ¶åŠå¿«é€Ÿæ£€æµ‹æ–¹æ³•ç ”ç©¶è¿›å±•.

Antibiotics are widely utilized in agriculture for the prevention and treatment of animal diseases. How-ever, the abuse and overuse of antibiotics progressively increase the risks of antibiotic residues and antibiotic resis-tance. The bioaccumulation and biomagnification of antibiotics through food chains will negatively affect ecological safety, and finally threaten human health. There are many shortages of traditional antibiotic detection techniques, such as complex procedures, complicated operation and time consuming, and thus are difficult to meet the demand of instant, efficient and accurate on-site detection. Therefore, it is crucial to develop rapid detection techniques of antibiotics to manage the application of antibiotics in agriculture. We reviewed the utilization, and management of antibiotics in animal husbandry, residual characteristics, and potential hazards of antibiotics in agricultural products, summarized the advancements in rapid detection techniques of antibiotics in agricultural products over the past five years, compared the advantages and disadvantages of different rapid detection techniques, and prospected the future development in this area. This review would provide a valuable reference to the control and point-of-care test of antibiotics in agricultural products.

A High-Entropy Intergrowth Layered-Oxide Cathode with Enhanced Stability for Sodium-Ion Batteries.

Layered transition metal oxides are widely considered as ideal cathode materials for SIBs. However, the existing P2 and O3 structures possess specific issues, which limit their practical applications. To address these issues, this work designed a novel intergrowth layered oxide cathode with P2 and O3 phases by implementing Cu and Ti into the structure with the formation of high-entropy cathode materials with superior performance for SIBs. The electrochemical test results show that the optimized high-entropy cathode with the P2/O3 intergrowth structure possesses a high initial discharge capacity of 157.85 mAh g-1 at 0.1 C, an excellent rate performance of 84.41 mAh g-1 at 10 C, and long-term stability with capacity retention of 83.25 % after 500 cycles at 5 C. Furthermore, the analysis results of ex situ XRD and in situ XRD indicate that the adverse phase transition of P2-O2 under high voltage is effectively suppressed. This work indicates that the integration of high-entropy strategy with the two-phase intergrowth structure can effectively stabilize the layered structure, suppress the slipping of transition metal layers, and improve electrochemical performance, which provides a new approach for designing high-performance and practical layered transition metal oxide cathode materials for advanced SIBs.