RESUMEN
The conventional sintering process of municipal solid waste incineration (MSWI) fly ash is always energy intensive. The process forms a cracked structure because of the difficulty in forming the liquid phase to enhance the mass transfer process. Therefore, exploring a new disposal method to simultaneously decrease the sintering temperature and improve the mechanical and heavy metal leaching properties of sintered samples is necessary. In this study, a pressure-assisted sintering treatment was introduced to dispose fly ash by varying the chemical composition and mechanical pressure at relatively low temperatures (300-500 °C). The results revealed that the compressive strength of treated samples increased with the CaO/SiO2 molar ratio increasing from 0.5 to 1.0, and a maximum value of 238.28 ± 8.50 MPa was obtained. The heavy metal leaching concentration results demonstrated a low risk of contamination in the treated samples. Microstructure analyses suggested that the densification process was enhanced with increased mechanical pressure, and the formed calcium silicates and aluminosilicates positively affected the compressive strength. Moreover, smaller crystal lattices were observed during aggregation formation, suggesting the restraint of anomalous crystal growth, which accelerated the densification process and increased the compressive strength. Moreover, the mass transfer process during the pressure-assisted sintering process was enhanced compared with the conventional thermal process, which was reflected by the transformation of elements from homogeneous to heterogeneous distribution. Therefore, the improved mechanical properties and leaching behavior of heavy metals were attributed to the densified microstructure, formation of new minerals, and enhanced driving force during the pressure-assisted sintering process. These findings suggest that pressure-assisted sintering is a promising method for maximizing the reutilization and minimizing the energy consumption simultaneously to dispose fly ash.
Asunto(s)
Metales Pesados , Eliminación de Residuos , Carbono , Ceniza del Carbón , Incineración , Metales Pesados/análisis , Material Particulado , Dióxido de Silicio , Residuos Sólidos/análisisRESUMEN
The research on preparing high-quality pellets by combining torrefaction and densification of biomass has received widespread attention. This paper investigated the influence of torrefaction temperature on biomass and evaluated the quality of three kinds of pellets (raw pellets, ex-situ torrefied densified pellets and in-situ torrefied densified pellets). When the torrefaction temperature was raised to 300 °C, the energy yield of rice straw (RS) and rice husk (RH) quickly decreased to 71.08% and 77.62%, and the cellulose was decomposed significantly. The results proved that 250 °C was an optimum temperature for RS and RH torrefaction. The densities of RS and RH in-situ torrefied densified pellets were 1236.84 kg/m3 and 1277.50 kg/m3 under 150 MPa, respectively. The density, Meyer hardness, hydrophobicity, and mechanical specific energy consumption of the pellet increased with the increase of molding pressure. The in-situ pellets had higher Meyer hardness, hydrophobicity, and lower mechanical specific energy consumption under the same molding pressure than raw pellets and ex-situ torrefied densified pellets. In addition, the bonding mechanism was studied by using scanning electron microscopy and ultraviolet auto-fluorescence. In-situ torrefaction and densification facilitated the formation of self-locking and the migration of lignin between particles. Compared with RH pellets, RS pellets had higher quality due to the higher hemicellulose content, which was necessary for forming stable hydrogen bonds.
Asunto(s)
Oryza , Biomasa , Celulosa , Interacciones Hidrofóbicas e Hidrofílicas , TemperaturaRESUMEN
Polylactic acid (PLA) plastic is becoming a popular alternative to traditional petroleum-based plastics, but the biodegradability in engineered biological system is still a matter of concern. In this study, the biodegradability of PLA plastic at mesophilic and thermophilic AD were investigated, and a hydrothermal pretreatment was proposed to enhance the hydrolysis of PLA plastic and subsequent biomethanization. For raw PLA plastic, the biodegradation results indicated that PLA was hardly biodegraded at mesophilic conditions (only 50.5 ± 0.5 mL/g VS after 146 days). Although it was converted into biogas at thermophilic conditions after long incubation period (442.6 ± 1.1 mL/g VS), the long digestion time (T90 95.8 days) was destined to be infeasible for practical application. In contrast, hydrothermal pretreatment significantly enhanced the hydrolysis rates of PLA plastic in AD process from 0.001 day-1 for raw PLA plastic to 0.004-0.111 day-1. By balancing biogas production efficiency, energy and reagent cost, the conditions of 200 °C, 10 min and no alkali addition were recommended for hydrothermal pretreatment of waste PLA plastic in practice. At the optimized hydrothermal pretreatment conditions, 460.1 ± 25.0 mL/g VS was achieved in less than 30 days, which was comparable for AD of food waste (FW). Furthermore, LC-QEMS analysis proved that cleavages of ester bonds in PLA and its reaction with water molecule was the mechanism of triggering the hydrothermally decomposition of PLA. These results suggested the PLA-plastic waste co-mingled with OFMSW could be efficiently biomethanized into biogas by involving a mild hydrothermal pretreatment in practical application.
Asunto(s)
Eliminación de Residuos , Anaerobiosis , Biocombustibles , Reactores Biológicos , Alimentos , Cinética , Metano , Plásticos , PoliésteresRESUMEN
This study aimed at evaluating the valorization of a typical yard waste, phoenix tree leaf (PTL), through mild alkali pretreatment followed by anaerobic digestion (AD). To this end, L9 Taguchi orthogonal biochemical methane potential (BMP) tests and semi-continuous AD experiments were conducted to examine the optimum pretreatment condition and the long term effect of alkali pretreatment on AD. The community structure evolutions were analyzed by high throughput 16S rRNA gene pyrosequencing. The results indicated that alkali pretreatment was effective on decrystallization and releasing more surface of PTL for enzyme attacking. The methane yield was positively correlated with lignin removal (R2=0.8242). In semi-continuous mode, 151.5±7.9 mL/g VS of the methane yield was obtained for alkali pretreated PTL, which was 80% higher than that of untreated one. Microbial community analysis indicated that alkali pretreatment led to a higher abundance of dominated bacteria (Bacteroidetes and Clostridia) and archaea of Methanosaeta.