[Preparation, characterization and antitumor effect of iron-based organic framework nano preparations loaded with piperlongumine].

The preparation processes of iron-based organic framework(FeMOF) MIL-100(Fe) and MIL-101(Fe) with two different ligands were optimized and screened, and the optimized FeMOF was loaded with piperlongumine(PL) to enhance the biocompatibility and antitumor efficacy of PL. The MIL-100(Fe) and MIL-101(Fe) were prepared by solvent thermal method using the optimized reaction solvent. With particle size, polymer dispersity index(PDI), and yield as indexes, the optimal preparation processes of the two were obtained by using the definitive screening design(DSD) experiment and establishing a mathematical model, combined with the Derringer expectation function. After characterization, the best FeMOF was selected to load PL by solvent diffusion method, and the process of loading PL was optimized by a single factor combined with an orthogonal experiment. The CCK-8 method was used to preliminarily evaluate the biological safety of blank FeMOF and the antitumor effect of the drug-loaded nano preparations. The experimental results showed that the optimal preparation process of MIL-100(Fe) was as follows: temperature at 127.8 ℃, reaction time of 14.796 h, total solvent volume of 11.157 mL, and feed ratio of 1.365. The particle size of obtained MIL-100(Fe) nanoparticles was(108.84±2.79)nm; PDI was 0.100±0.023, and yield was 36.93%±0.79%. The optimal preparation process of MIL-101(Fe) was as follows: temperature at 128.1 ℃, reaction time of 6 h, total solvent volume of 10.005 mL, and feed ratio of 0.500. The particle size of obtained MIL-101(Fe) nanoparticles was(254.04±22.03)nm; PDI was 0.289±0.052, and yield was 44.95%±0.45%. The optimal loading process of MIL-100(Fe) loaded with PL was as follows: the feed ratio of MIL-100(Fe) to PL was 1∶2; the concentration of PL solution was 7 mg·mL~(-1), and the ratio of DMF to water was 1∶5. The drug loading capacity of obtained MIL-100(Fe)/PL nanoparticles was 68.86%±1.82%; MIL-100(Fe) was nontoxic to HepG2 cells at a dose of 0-120 µg·mL~(-1), and the half-inhibitory concentration(IC_(50)) of free PL for 24 h treatment of HepG2 cells was 1.542 µg·mL~(-1). The IC_(50) value of MIL-100(Fe)/PL was 1.092 µg·mL~(-1)(measured by PL). In this study, the optimal synthesis process of MIL-100(Fe) and MIL-101(Fe) was optimized by innovatively using the DSD to construct a mathematical model combined with the Derringer expectation function. The optimized preparation process of MIL-100(Fe) nanoparticles and the PL loading process were stable and feasible. The size and shape of MIL-100(Fe) particles were uniform, and the crystal shape was good, with a high drug loading capacity, which could significantly enhance the antitumor effect of PL. This study provides a new method for the optimization of the nano preparation process and lays a foundation for the further development and research of antitumor nano preparations of PL.

[Composition and morphology of Scutellariae Radix-Coptidis Rhizoma decoction co-precipitate and effect on in vivo behavior of decocting liquid].

Scutellariae Radix-Coptidis Rhizoma(SR-CR) herbal pair is commonly used in many compound prescriptions for their synergistic heat-clearing and dampness-drying properties. During the decoction process, a substantial amount of precipitate is generated. However, there have been no explicit reports on the composition, morphology, and potential effects of this precipitate on the in vivo behavior of SR-CR decoction. This study employed high-performance liquid chromatography(HPLC), high-resolution mass spectrometry, and other techniques to analyze the composition of the co-precipitate in the decoction of SR-CR. Scanning electron microscopy and mass spectrometry imaging were used to analyze its appearance and morphology. Additionally, rats were used to investigate the effects of the co-precipitate on the in vivo behavior of the main components in the SR-CR decoction. The research findings indicated that eight components, including coptisine, berberine, epiberberine, palmatine, baicalin, oroxylin A-7-O-ß-D-glucuronide, wogonoside and baicalein, constituted the primary composition of the co-precipitate. Among these, baicalin and berberine hydrochloride were the most abundant, accounting for about 60% of the total weight. Moreover, the co-precipitate contained 18% tannins. Morphological analysis revealed that the particles in the SR-CR decoction precipitate were spherical microparticles with an average diameter of around 600 nm. Pharmacokinetic research demonstrated that there were significant differences in the AUC, C_(max), t_(1/2), and T_(max) of baicalin, a major component, in rats administered with lyophilized powders of the combined decoction and single decoctions of SR-CR orally, suggesting that the precipitate generated during the decoction process can affect the in vivo behavior of the main components of the SR-CR decoction. It can reduce the absorption of baicalin in the body, decrease the extent of rapid drug release, and to a certain extent, prevent adverse reactions or side effects.

[Application of multivariate models in whole process control of solid preparations].

The production of solid preparations is a multi-unit and multi-step system and is a whole process chain. Its quality is affected by many factors such as material properties and process parameters. As an important analysis tool, multivariate models play an important role in pharmaceutical monitoring. Besides, multivariate models can comprehensively understand the multi-factor relationship between material properties, process parameters, and quality attributes of products, thereby promoting the whole process optimization and controlling the drug production quality. This paper summarized the application of commonly used multivariate models in the process of solid preparations, which provides a certain reference for the process modeling of Chinese medicinal preparations.

[Study on benchmark preparation technology of boiled and powdered classical prescriptions by taking Houpo Wenzhong Decoction as an example].

In recent years,the development and application of classical famous prescriptions have attracted much attention. However,the differences between ancient and modern conditions lead to difficulties in carrying out practical work. In this paper,with Houpu Wenzhong Decoction as an example,the key technologies of boiling granularity,water addition,boiling time and sample pretreatment methods were investigated on the basis of sufficient literature research. The experimental results showed that there was no significant difference in the concentration of index components between those with different granularity( 2 mm and 3-5 mm) and different decocting time( 30 min and 60 min),but the extraction rate of index components was relatively high when the granularity of powder was 2 mm and decocting time was 30 min. With the increase of water content,the concentration of index components and the extraction rate were increased in varying degrees. A certain proportion of methanol aqueous solution was used as the resolvent before content determination of the reference sample of Houpu Wenzhong Decoction,which could take into account both the spectral information of water-soluble components and fat-soluble components in the prescription,and help to display the overall information of the prescription' s chemical components more comprehensively. At the same time,the boiling and dispersing classical prescriptions in the Catalogue of Ancient Classical Prescriptions( the first batch) were collected and summarized in this study; the key influencing factors of decocting process were analyzed from different angles,and preliminary research suggestions were put forward,so as to provide a certain direction and reference for the establishment of quality standard of Houpu Wenzhong Decoction,as well as for the development,research and clinical application of boiling and dispersing classical prescriptions.