Influence of different stalks on the metallization degree of FeCl3-derived magnetic biochar through pyrolysis behavior and compositional differences.

To investigate the effect of stalk type on the metallization degrees in FeCl3-derived magnetic biochar (MBC), MBC was synthesized via an impregnation-pyrolysis method using six different stalks. The Fe0 content in MBC significantly influenced its magnetic properties and ostensibly governed its catalytic capabilities. Analysis of the interaction between stalks and FeCl3 revealed that the variation in metallization degrees, resulting from FeCl2 decomposition (6.1%) and stalk-mediated reduction (20.7%), was directly responsible for the observed differences in MBC metallization. The presence of oxygen-containing functional groups and fixed carbon appeared to promote metallization in MBC induced by reduction. A series of statistical analyses indicated that the cellulose, lignin, and hemicellulose content of the stalks were key factors contributing to differences in MBC metallization degrees. Further exploration revealed that hemicellulose and cellulose were more effective than lignin in enhancing metallization through FeCl2 decomposition and reduction. Constructing stalk models demonstrated that the variance in the content of these three biomass components across the six stalk types could lead to differences in the metallization degree attributable to reduction and FeCl2 decomposition, thereby affecting the overall metallization degree of MBC. A prediction model for MBC metallization degree was developed based on these findings. Moreover, the elevated Si content in some stalks facilitated the formation of Fe2(SiO4), which subsequently impeded the reduction process. This study provides a theoretical foundation for the informed selection of stalk feedstocks in the production of FeCl3-derived MBC.

Metabolomic reveals the responses of sludge properties and microbial communities to high nitrite stress in denitrifying phosphorus removal systems.

Nitrite, as an electron acceptor, plays a good role in denitrifying phosphorus removal (DPR); however, high nitrite concentration has adverse affects on sludge performance. We investigated the precise mechanisms of responses of sludge to high nitrite stress, including surface characteristics, intracellular and extracellular components, microbial and metabolic responses. When the nitrite stress reached 90 mg/L, the sludge settling performance was improved, but the activated sludge was aging. FTIR and XPS analysis revealed a significant increase in the hydrophobicity of the sludge, resulting in improve settling performance. However, the intracellular carbon sources synthesis was inhibited. In addition, the components in the tightly bound extracellular polymeric substances (TB-EPS) of sludge were significantly reduced and indicated the disturb of metabolism. Notably, Exiguobacterium emerged as a new genus when face high nitrite stress that could maintaining survival in hostile environments. Moreover, metabolomic analysis demonstrated strong biological response to nitrite stress further supported above results that include the inhibited of carbohydrate and amino acid metabolism. More importantly, some lipids (PS, PA, LysoPA, LysoPC and LysoPE) were significantly upregulated that related enhanced membrane lipid remodeling. The comprehensive analyses provide novel insights into the high nitrite stress responses mechanisms in activated sludge systems.

Mechanisms of ZnO Nanoparticles Enhancing Phototransformation of Biologically Derived Organic Phosphorus in Aquatic Environments.

Zinc oxide nanoparticles (ZnO NPs), as the highly efficient photocatalysts, could enhance the transformation of biogenic organic phosphorus (OP) to orthophosphate (PO43-) by photodegradation, accelerating eutrophication. Conversely, orthophosphate can also transform ZnO NPs and thus potentially alter their catalytic and chemical properties. Here, we investigated the transformation mechanisms of three biogenic OP compounds and ZnO NPs under ultraviolet light (UV) illumination: inositol phosphates (IHPs), nucleic acids (DNA), and aminoethylphosphonic acid (AEP). The physicochemical characteristics of the resulting products were systematically characterized. Results show that ZnO NPs accelerated the transformation of IHPs, DNA, and AEP to inorganic phosphorus with the direct photolysis efficiencies of 98.14, 87.68, and 51.76%, respectively. The main component of the precipitates remained ZnO NPs, and Zn3(PO4)2 was identified. Zinc phytate was determined in the ZnO NP-IHP system. 31P NMR and FTIR further confirmed that the aquatic phase contained orthophosphate. Photoproduced hydroxyl (·OH) and superoxide (·O2-) were proved to play a dominant role in the OP photomineralization. Furthermore, ZnO NPs significantly enhanced the intensity of ·OH and ·O2- compared to the OP and Zn2+ solution alone. This work explored the light-induced mineralization processes of OP with ZnO NPs indicating that nanophotocatalysts may play a positive role in transformation of OP species in aquatic environments to further contribute to eutrophication.

Iron mediated autotrophic denitrification for low C/N ratio wastewater: A review.

In recent years, iron mediated autotrophic denitrification has been a concern because it overcomes the absence of organic carbon and has been successfully used in denitrification for low C/N ratio wastewater. However, there is currently a lack of a more systematic summary of iron-based materials that can be used for denitrification, and no detailed overview about the mechanism of iron mediated autotrophic denitrification has been reported. In this study, the iron materials with different valence states that can be used for denitrification were summarized, and emphasized, as well as the mechanism in different interaction systems were emphasize. In addition, the contribution of various microorganisms in nitrate reduction were analyzed and the effects of operating conditions and water quality were evaluated. Finally, the challenges and shortcomings of the denitrification process were discussed aiming to find better practical engineering applications of iron-based denitrification.

Nutrient dynamics and microbial community response in macrophyte-dominated lakes: Implications for improved restoration strategies.

Although lakes dominated by macrophytes are conducive to ecological balance, this balance is easily disrupted by excessive nutrients flowing into the lake. However, knowledge of whether excessive nutrients lead to different microbial environmental vulnerabilities in the lake sediment between macrophyte-dominated areas and macrophyte-free areas is a prerequisite for the implementation of targeted protection measures. In this study, we investigated bacterial communities in sediments using high-throughput sequencing of 16S rRNA genes. Our results showed that the sources of total nitrogen (TN) and organic matter (OM) were related to the macrophytes. The structure, drivers, and interspecific associations of bacterial community, which were more susceptible to increased changes in TN and OM, differed significantly between macrophyte-dominated areas and macrophyte-free areas. More precisely, the lake edge, where was occupied by macrophytes, had a higher proportion of deterministic phylogenetic turnover (88.89%) than other sites, as well as a wider ecological niche and a tighter network structure. Further, as the difference in TN increased, the main assembly processes in surface sediments changed from stochastic to deterministic. However, the majority of phyla from the lake edge showed a greater correlation with excessive nutrients, and the selection of the community by excessive nutrients was more obvious at the edge of the lake. In addition, our results demonstrated that the stability of the bacterial community in macrophyte-free areas is greater than in macrophyte-dominated areas, while an excessively high deterministic process ratio and nutrient (TN and OM) concentration significantly reduced bacterial community stability at macrophyte-dominated areas. Taken together, these results provide a better understanding of the effects of excessive nutrients derived from macrophytes on bacterial community patterns, and highlight the importance of avoiding the accumulation of TN and OM in macrophyte-dominated areas to enhance the sustainability of the ecosystem after restoration of lakes with macrophytes.

The advanced treatment of textile printing and dyeing wastewater by hydrodynamic cavitation and ozone: Degradation, mechanism, and transformation of dissolved organic matter.

The emission standards for textile printing and dyeing wastewater are stricter due to serious environmental issues. A novel technology, hydrodynamic cavitation combined with ozone (HC + O3), has attracted wide attention in wastewater advanced treatment, whereas the contaminants removal mechanism and transformation of dissolved organic matter (DOM) were rarely reported. This study investigated the removal efficiency and mechanism of HC + O3. The maximum removal rates of UV254, chrominance, CODCr, and TOC were 64.99%, 91.90%, 32.30%, and 36.67% in 60 min, respectively, at the inlet pressure of 0.15 MPa and O3 dosage of 6.25 mmol/L. The synergetic coefficient of HC + O3 was 2.77. The removal of contaminants was the synergy of 1O2, ·OH and ·O2-, and high molecular weight and strong aromaticity organic matters were degraded effectively. The main components in DOM were tryptophan-like and tyrosine-like, which were effectively removed after HC + O3. Meanwhile, most DOM had decreased to low apparent relative molecular weight (LARMW) compounds. Additionally, the HC + O3 effluent can reach the emission standard in 60 min for 8.07 USD/m3. It can be concluded that HC + O3 is an effective technology for the advanced treatment of industrial wastewater. This study will provide suggestions for the engineering application of HC + O3.

Removal of Escherichia coli from domestic sewage using biological sand filters: Reduction effect and microbial community analysis.

The recycling of sewage is an economical option to solve the water resource pressure. However, to avoid health risks to humans, pathogens in sewage must be removed before reuse. In this study, a biological sand filter (BSF) was used to remove pathogen indicator Escherichia coli (E. coli) from sewage. The biolayer (schmutzdecke layer) formation process of BSFs, operation performance, factors affecting E. coli removal and microbial community structure were evaluated. The results of schmutzdecke layer culture showed that a large number of microorganisms were attached to the upper medium of BSFs. At the same time, the BSFs could reduce both conventional contaminants and E. coli. The E. coli removal experiments revealed that the removal rate of E. coli was about 96.1% at higher effective medium depth (50 cm), the removal rate was about 95% when set hydraulic loading rate (HLR) to 0.16 m3/m2/h and the removal efficiency reached 93.6% at lower influent bacteria concentration. Finally, the microbial community analysis indicated that different BSFs had similar microbial structure, and the microbial abundance in the schmutzdecke layer was higher than that in the bottom layer in the same BSFs. Besides, Biological action played a significant role in the removal of E. coli, including the bacteriolysis of Bdellovibrio and the competition between other bacteria and E. coli. In summary, BSF was a promising technology for removing E. coli from sewage.

Degradation of acid red 73 wastewater by hydrodynamic cavitation combined with ozone and its mechanism.

Many azo dyes are consumed in the textile and dyeing industry, which makes the wastewater recalcitrant and toxic to the aquatic environment. Dye degradation by the combination of hydrodynamic cavitation and ozone (HC + O3) has caused extensive interest. The degradation mechanism of the hybrid system needs further investigation. This study investigated the degradation of acid red 73 (AR73) by HC + O3. Meanwhile, the degradation pathways and mechanisms were present. The optimal operation parameters were: inlet pressure of 0.15 MPa, O3 dosage of 45 mg/min, initial dye concentration of 10 mg/L, and initial pH at 7.5. As a result, the decolorization rate, removal of UV254 and NH3-N were 100%, 71.28%, and 87.36% in 30 min, respectively. Humic acid and most of the co-existing anions (HCO3-, SO42-, Cl-, PO43-, NO3-) played a positive role in the degradation of AR73, while NO2- restrained. The reactive species of singlet oxygen (1O2), hydroxyl radicals (·OH) and super oxygen radicals (·O2-) showed synergism in the hybrid system, and the decolorization was attributed to the fracture of azo bonds by 1O2. Meanwhile, aromatic amines were generated and further degraded into small molecule compounds. The research certificated that the HC + O3 can be an effective technology for azo dye degradation.

Optimization of the raw materials of biochars for the adsorption of heavy metal ions from aqueous solution.

In this paper, the material types were preferentially selected for different kinds of heavy metals, the effect of calcination temperatures on metal adsorption was investigated, and the adsorption mechanism was explored and summarized. The results show that the pseudo-first-order kinetic was better to fit the adsorption of heavy metals. The biomass type and pyrolysis temperature had an effect on the rate at which heavy metals were absorbed. Based on their adsorbed capacity, 350 °C pyrolyzed corn stalk char, 550 °C pyrolyzed peanut shell char, 450 °C pyrolyzed peanut shell char, 450 °C pyrolyzed peanut shell char, and 500 °C pyrolyzed wheat stalk char were shown to be the best adsorbents for Cr2O72-, Cd2+, Cu2+, Zn2+ and Pb2+, respectively. The largest adsorption rate were in the order of Cr6+ (Cr2O72-, 0.5380 /min) > Pb2+ (0.2276 /min) > Cd2+ (0.1354 /min) > Cu2+ (0.1273 /min) > Zn2+ (0.1000 /min), which might be positively related to the ion radius. Meanwhile, the yield of biomass decreased from 43.9% to 29.0% with the increase of pyrolysis temperature from 350 °C to 550 °C. In addition, the specific surface area and functional groups of the biochar, as well as the ionic radius and initial concentration of heavy metals affect the adsorption rate.

Transcriptomics and Metabolomics Revealed the Biological Response of Chlorella pyrenoidesa to Single and Repeated Exposures of AgNPs at Different Concentrations.

Increased release of engineered nanoparticles (ENPs) from widely used commercial products has threatened environmental health and safety, particularly the repeated exposures to ENPs with relatively low concentration. Herein, we studied the response of Chlorella pyrenoidesa (C. pyrenoidesa) to single and repeated exposures to silver nanoparticles (AgNPs). Repeated exposures to AgNPs promoted chlorophyll a and carotenoid production, and increased silver accumulation, thus enhancing the risk of AgNPs entering the food chain. Notably, the extracellular polymeric substances (EPS) content of the 1-AgNPs and 3-AgNPs groups were dramatically increased by 119.1% and 151.5%, respectively. We found that C. pyrenoidesa cells exposed to AgNPs had several significant alterations in metabolic process and cellular transcription. Most of the genes and metabolites are altered in a dose-dependent manner. Compared with the control group, single exposure had more differential genes and metabolites than repeated exposures. 562, 1341, 4014, 227, 483, and 2409 unigenes were differentially expressed by 1-0.5-AgNPs, 1-5-AgNPs, 1-10-AgNPs, 3-0.5-AgNPs, 3-5-AgNPs, and 3-10-AgNPs treatment groups compared with the control. Metabolomic analyses revealed that AgNPs altered the levels of sugars and amino acids, suggesting that AgNPs reprogrammed carbon/nitrogen metabolism. The changes of genes related to carbohydrate and amino acid metabolism, such as citrate synthase (CS), isocitrate dehydrogenase (IDH1), and malate dehydrogenase (MDH), further supported these results. These findings elucidated the mechanism of biological responses to repeated exposures to AgNPs, providing a new perspective on the risk assessment of nanomaterials.

Performance of sludge drying reed beds for the leachate purification: Effects of sludge loading frequencies and plant species.

Sludge drying reed beds (SDRBs), as a natural biological technology, have positive effects on surplus sludge treatment. However, few studies focus on the sludge leachate purification in the SDRBs regarding the wetland plant species and sludge loading rates. In this study, four SDRBs planted with two wetland plant species (Phragmites australis, Typha angustifolia) were investigated for leachate purification under six sludge loading volumes and feeding frequencies (9L/3d, 6L/3d, 4L/d, 3L/d, 2.5L/d, and 2L/d). Results showed that the lowest Escherichia coli content of 630 number/mL was determined in the P. australis SDRBs, with 86.2-92.8% lower than those in the T. angustifolia controls. However, similar removal efficiencies of chemical oxygen demand (COD), total nitrogen (TN), ammonium (NH4+), total phosphorus (TP), and heavy metals were obtained in the SDRBs with both plant species. Moreover, the optimum sludge loading volume and feeding frequency of 3L/d was determined in the P. australis system, with pollutants (COD, TN, NH4+, and TP) mass removal efficiencies in the leachate being over 94.9%. In addition, the principal component analysis indicated that water loss and oxidation-reduction potential had positive influences on pollutant removal in the planted SDRBs. Overall, the best leachate removal efficiency was obtained in the P. australis SDRBs under the sludge loading volume and feeding frequency of 3L/d.

Specific biotests to assess eco-toxicity of biodegradable polymer materials in soil.

Eco-toxicity investigation of polymer materials was considered extremely necessary for their potential menace, which was widely use as mulching materials in agricultural. In this study, polyethylene (PE), polystyrene (PS) and synthetic biomaterials-Ecoflex and cellulose were applying into soil cultivated with two potential indicator plants species: oat (Avena sativa) and red radish (Raphanus sativum). Variety of chemical, biochemical parameters and enzyme activity in soil were proved as effective approach to evaluate polymers phytotoxicity in plant-soil mesocosm. The F-value of biomass, pH, heavy metal and electoral conductivity of Raphanus behaved significant different from T0. Significant analysis results indicated biodegradation was fast in PE than PS, besides, heavy metals were dramatically decrease in the end implied the plant absorption may help decrease heavy metal toxicity. The increase value at T2 of Dehydrogenase activity (0.84 higher than average value for Avena & 0.91 higher for Raphanus), Metabolic Index (3.12 higher than average value for Avena & 3.81 higher for Raphanus) means during soil enzyme activity was promoted by biodegradation for its heterotrophic organisms' energy transportation was stimulated. Statistics analysis was carried on Biplot PC1 (24.2% of the total variance), PC2 (23.2% of the total variance), versus PC3 (22.8% of the total variance), which indicated phosphatase activity and metabolic index was significant correlated, and high correlation of ammonium and protease activity. Furthermore, the effects were more evident in Raphanus treatments than in Avena, suggesting the higher sensitivity of Raphanus to polymers treatment, which indicate biodegradation of polymers in Raphanus treatment has produced intermediate phytotoxic compounds.

New insights into impact of thermal hydrolysis pretreatment temperature and time on sewage sludge: Structure and composition of sewage sludge from sewage treatment plant.

This work investigated the effects of THP temperature (140-200 °C) and time (10-60 min) on the surface morphology, pyrolysis properties, and soluble compounds of dewatered sludge. Results indicate that higher temperature and longer pretreatment time considerably improve organics hydrolysis (the SCOD content increased 1.4-2.46 times, increasing 2.46 times at 200 °C). In addition, high temperature also improved the sludge pyrolysis efficiency (the highest at 200 °C), and reduced the harmful gas release, especially HCN. Moreover, the surface morphology of the sludge changed, the gap and floccules on the surface of the sludge increased. The carbohydrate content increased the highest; approximately 91.9% at 170 °C. THP promoted the decomposition of the nitrogen compounds in the sludge and facilitated their transition to a liquid phase. The total nitrogen and ammonia nitrogen content doubled, and the organic nitrogen content decreased by 50% with time increased from 10 to 60 min.

Metagenomic analysis of soil microbial community under PFOA and PFOS stress.

Perfluorinated compounds (PFCs) contamination of soil has attracted global attention in recent years but influences of PFCs on microorganisms in the soil environment have not been fully described. In this study, the effects of perfluorooctane sulphonate (PFOS) and perfluoroctanoic acid (PFOA) on bacterial communities were determined by Illumina Miseq sequencing and Illumina Hiseq Xten. The stimulation of PFCs pollutants on soil bacterial richness and community diversity were observed. Sequencing information indicated that Proteobacteria, Acidobacteria, Actinobacteria, Chloroflexi, Firmicutes, and Gemmatimonadetes were the dominant bacterial phyla. Two genera, Bacillus and Sphingomonas, exhibited adverse responses toward PFCs pollution. Carbohydrate-active enzymes (CAZy), Kyoto Encyclopedia of Genes and Genomes (KEGG) and NCBI databases were used to elucidate the proteins and function action of soil microbial to PFCs pollution. Pathways such as Carbohydrate metabolism, Global and overview maps and Membrane transport in the soil microbes were affected by PFCs stress. CAZy analysis revealed that glycosyl transferases (GTs) in PFCs-polluted soils showed more active, while glycoside hydrolases (GHs) were inhibited severely.

Deciphering the toxic effects of metals in gold mining area: Microbial community tolerance mechanism and change of antibiotic resistance genes.

Mine tailing dumps represent significant threats to ecological environments due to the presence of toxic substances. The present work investigated the relationship among microbial activity, the community, antibiotic resistance genes (ARGs) and trace metals in soil surrounding gold mine tailings. Using microbial metabolic activity and high-throughput sequencing analysis, we found the trace metals Cd and Hg could be main factors influencing the microbial community. According to bacterial co-occurrence pattern analysis, the effects of total cadmium and total mercury on bacterial diversity are potentially mediated by influencing bacteria community in the keystone module II. Additionally, most of metal-resistant bacteria belong to Actinobacteria and Proteobacteria, and the metal tolerance suggested to be linked with various functions including replication, recombination and repair, as well as inorganic ion transport and metabolism based on PICRUSt2 analysis. We also found that metals generated by mining activity may trigger the co-selection of antibiotic resistance in the phyla Actinobacteria and Proteobacteria due to co-resistance or cross resistance. Additionally, PLS-PM analysis revealed that metals could indirectly affect ARGs by influencing bacterial diversity in gold mining areas.

Uranium biosorption from aqueous solution by the submerged aquatic plant Hydrilla verticillata.

The biosorption characteristics of U(VI) from aqueous solution onto a nonliving aquatic macrophyte, Hydrilla verticillata (dry powder), were investigated under various experimental conditions by using batch methods. Results showed that the adsorption reached equilibrium within 60 min and the experimental data were well fitted by the pseudo-first-order kinetic model. U(VI) adsorption was strongly pH dependent, and the optimum pH for U(VI) removal was 5.5. Isotherm adsorption data displayed good correlation with the Langmuir model, with a maximum monolayer adsorption capacity of 171.52 mg/g. Thermodynamic studies suggested that U(VI) adsorption onto H. verticillata was an exothermic and spontaneous process in nature. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy indicated that the amino and hydroxyl groups on the algal surface played an important role in U(VI) adsorption. The mechanisms responsible for U(VI) adsorption could involve electrostatic attraction and ion exchange. In conclusion, H. verticillata biomass showed good potential as an adsorption material for the removal of uranium contaminants in aqueous solution.

Interaction of diuron to human serum albumin: Insights from spectroscopic and molecular docking studies.

This investigation was undertaken to determine the interaction of diuron with human serum albumin (HSA) was studied by monitoring the spectral behavior of diuron-HSA system. The fluorescence of HSA at 340 nm excited at 230 nm was obviously quenched by diuron due to dynamic collision and the quenching constant was of the order of 10(4) L mol(-1) at 310 K. However, no fluorescence quenching was observed when excited at 280 nm. Thermodynamic investigations revealed that the combination between diuron and HSA was entropy driven by predominantly hydrophobic interactions. The binding of diuron induced the drastic reduction in α-helix conformation and the significant enhancement in ß-turn conformation of HSA. In addition, both sites marker competition study and molecular modeling simulation evidenced the binding of diuron to HSA primarily took place in subdomain IIIA (Sudlow's site II).

Removal of Pb(II) by adsorption onto Chinese walnut shell activated carbon.

The excessive discharge of Pb(II) into the environment has increasingly aroused great concern. Adsorption is considered as the most effective method for heavy metal removal. Chinese walnut shell activated carbon (CWSAC) was used as an adsorbent for the removal of Pb(II) from aqueous solution. Batch experiments were conducted by varying contact time, temperature, pH, adsorbent dose and initial Pb(II) concentration. Adsorption equilibrium was established within 150 min. Although temperature effect was insignificant, the Pb(II) adsorption was strongly pH dependent and the maximum removal was observed at pH 5.5. The Pb(II) removal efficiency increased with increasing CWSAC dosage up to 2.0 g/L and reached a maximum of 94.12%. Langmuir and Freundlich adsorption isotherms were employed to fit the adsorption data. The results suggested that the equilibrium data could be well described by the Langmuir isotherm model, with a maximum adsorption capacity of 81.96 mg/g. Adsorption kinetics data were fitted by pseudo-first- and pseudo-second-order models. The result indicated that the pseudo-first-order model best describes the adsorption kinetic data. In summary, CWSAC could be a promising material for the removal of Pb(II) from wastewater.

Investigating Pseudomonas putida-Candida humicola interactions as affected by chelate Fe(III) in soil.

Microcalorimetric technique was applied to assess the toxic effect of EDTA-chelated trivalent iron on Pseudomonas putida (P. putida) (bacterium), Candida humicola (C. humicola) (fungus) and their mixture in sterilized soil. Microbial growth rate constant k, total heat evolution Q T, metabolic enthalpy ∆H met, mass specific heat rate J Q/S, microbial biomass C and inhibitory ratio I were calculated. Results showed that microcalorimetric indexes decreased with the increasing Fe(III)-EDTA complex concentration. Comparing the single and mixed strains, the effect of Fe(III) on bacterium-fungus interaction was dominant at lower dose, whereas, the metal toxicity at high dose of Fe was the main factor affecting P. putida and C. humicola activity. Thus, the mixture had moderate tolerance to the iron overload, and exhibit synergistic interaction in exponential growth phase (0-0.3 mg g(-1)). The results of glucose degradation showed that glucose was consumed totally at the end of exponential phase of microbial growth.

Polycyclic aromatic hydrocarbons degrading microflora in a tropical oil-production well.

The surrounding environment near Dagang oil-production well suffers polycyclic aromatic hydrocarbons (PAHs) pollution. In the present study, indigenous microorganisms capable of degrading PAHs were isolated and the efficiency of PAHs removal was investigated. Seven PAH-degrading strains were isolated with the ability to grow on naphthalene, phenanthrene, pyrene and fluorene. They belonged to the genus Pseudomonas, Bacillus and Rhodococcus. The strain having the highest degrading capacity for each PAH was selected by the screening test. The removal efficiency of PAHs was found to be in the order of naphthalene > fluorene > phenanthrene > pyrene. The kinetics of PAHs degradation was then followed by liquid chromatography determination and the results showed it conforms to a first-order reaction kinetic model. This study would be highly important for investigating the ability of microorganisms to utilize PAHs as growth substrates.