RESUMEN
Replacement of liquid electrolytes with polymer gel electrolytes is recognized as a general and effective way of solving safety problems and achieving high flexibility in wearable batteries1-6. However, the poor interface between polymer gel electrolyte and electrode, caused by insufficient wetting, produces much poorer electrochemical properties, especially during the deformation of the battery7-9. Here we report a strategy for designing channel structures in electrodes to incorporate polymer gel electrolytes and to form intimate and stable interfaces for high-performance wearable batteries. As a demonstration, multiple electrode fibres were rotated together to form aligned channels, while the surface of each electrode fibre was designed with networked channels. The monomer solution was effectively infiltrated first along the aligned channels and then into the networked channels. The monomers were then polymerized to produce a gel electrolyte and form intimate and stable interfaces with the electrodes. The resulting fibre lithium-ion battery (FLB) showed high electrochemical performances (for example, an energy density of about 128 Wh kg-1). This strategy also enabled the production of FLBs with a high rate of 3,600 m h-1 per winding unit. The continuous FLBs were woven into a 50 cm × 30 cm textile to provide an output capacity of 2,975 mAh. The FLB textiles worked safely under extreme conditions, such as temperatures of -40 °C and 80 °C and a vacuum of -0.08 MPa. The FLBs show promise for applications in firefighting and space exploration.
RESUMEN
Calcium-oxygen (Ca-O2) batteries can theoretically afford high capacity by the reduction of O2 to calcium oxide compounds (CaOx) at low cost1-5. Yet, a rechargeable Ca-O2 battery that operates at room temperature has not been achieved because the CaOx/O2 chemistry typically involves inert discharge products and few electrolytes can accommodate both a highly reductive Ca metal anode and O2. Here we report a Ca-O2 battery that is rechargeable for 700 cycles at room temperature. Our battery relies on a highly reversible two-electron redox to form chemically reactive calcium peroxide (CaO2) as the discharge product. Using a durable ionic liquid-based electrolyte, this two-electron reaction is enabled by the facilitated Ca plating-stripping in the Ca metal anode at room temperature and improved CaO2/O2 redox in the air cathode. We show the proposed Ca-O2 battery is stable in air and can be made into flexible fibres that are weaved into textile batteries for next-generation wearable systems.
RESUMEN
Fibre lithium-ion batteries are attractive as flexible power solutions because they can be woven into textiles, offering a convenient way to power future wearable electronics1-4. However, they are difficult to produce in lengths of more than a few centimetres, and longer fibres were thought to have higher internal resistances3,5 that compromised electrochemical performance6,7. Here we show that the internal resistance of such fibres has a hyperbolic cotangent function relationship with fibre length, where it first decreases before levelling off as length increases. Systematic studies confirm that this unexpected result is true for different fibre batteries. We are able to produce metres of high-performing fibre lithium-ion batteries through an optimized scalable industrial process. Our mass-produced fibre batteries have an energy density of 85.69 watt hour per kilogram (typical values8 are less than 1 watt hour per kilogram), based on the total weight of a lithium cobalt oxide/graphite full battery, including packaging. Its capacity retention reaches 90.5% after 500 charge-discharge cycles and 93% at 1C rate (compared with 0.1C rate capacity), which is comparable to commercial batteries such as pouch cells. Over 80 per cent capacity can be maintained after bending the fibre for 100,000 cycles. We show that fibre lithium-ion batteries woven into safe and washable textiles by industrial rapier loom can wirelessly charge a cell phone or power a health management jacket integrated with fibre sensors and a textile display.
Asunto(s)
Cobalto/química , Suministros de Energía Eléctrica , Electrónica , Litio/química , Óxidos/química , Textiles , Dispositivos Electrónicos Vestibles , Grafito/química , Humanos , Iones , Masculino , Tecnología InalámbricaRESUMEN
Displays are basic building blocks of modern electronics1,2. Integrating displays into textiles offers exciting opportunities for smart electronic textiles-the ultimate goal of wearable technology, poised to change the way in which we interact with electronic devices3-6. Display textiles serve to bridge human-machine interactions7-9, offering, for instance, a real-time communication tool for individuals with voice or speech difficulties. Electronic textiles capable of communicating10, sensing11,12 and supplying electricity13,14 have been reported previously. However, textiles with functional, large-area displays have not yet been achieved, because it is challenging to obtain small illuminating units that are both durable and easy to assemble over a wide area. Here we report a 6-metre-long, 25-centimetre-wide display textile containing 5 × 105 electroluminescent units spaced approximately 800 micrometres apart. Weaving conductive weft and luminescent warp fibres forms micrometre-scale electroluminescent units at the weft-warp contact points. The brightness between electroluminescent units deviates by less than 8 per cent and remains stable even when the textile is bent, stretched or pressed. Our display textile is flexible and breathable and withstands repeated machine-washing, making it suitable for practical applications. We show that an integrated textile system consisting of display, keyboard and power supply can serve as a communication tool, demonstrating the system's potential within the 'internet of things' in various areas, including healthcare. Our approach unifies the fabrication and function of electronic devices with textiles, and we expect that woven-fibre materials will shape the next generation of electronics.
Asunto(s)
Terminales de Computador , Electrónica/instrumentación , Textiles , Humanos , Docilidad , Dispositivos Electrónicos VestiblesRESUMEN
We report on a high average power and high repetition rate nanosecond pulsed eye-safe KGW Raman laser intracavity driven by an acousto-optic Q-switched 1342â nm two-crystal Nd:YVO4 laser. Taking advantages of the carefully selected two-composite-laser-crystal configuration, the thoroughly optimized gate-open time of acousto-optic modulator and the ingeniously designed U-shaped resonator, substantial power and efficiency enhancements as well as superior mode matching have been enabled. Under the injected pump power of 64.5â W, the average output powers of the first-Stokes fields at 1496 and 1527â nm can be up to 8.1 and 9.5â W with 25â kHz repetition rate and 3.2â µs gate-open time, respectively, corresponding to the optical power conversion efficiencies of 12.6% and 14.7%. Meantime, the resultant pulse widths are determined to be 4.6 and 6.3â ns with the peak powers of approximately 70 and 60â kW, respectively. The beam quality can be maintained with M2 < 1.5 across the entire output power range.
RESUMEN
Rechargeable sodium/chlorine (Na/Cl2 ) batteries are emerging candidates for sustainable energy storage owing to their superior energy densities and the high abundance of Na and Cl elements. However, their practical applications have been plagued by the poor rate performance (e.g., a maximum discharge current density of 150â mA g-1 ), as the widely used carbon nanosphere cathodes show both sluggish electron-ion transport and reaction kinetics. Here, by mimicking the sufficient mass and energy transport in a sponge, we report a bicontinuous-structured carbon cubosome with heteroatomic doping, which allows efficient Na+ and electron transport and promotes Cl2 adsorption and conversion, thus unlocking ultrahigh-rate Na/Cl2 batteries, e.g., a maximum discharge current density of 16,000â mA g-1 that is more than two orders of magnitude higher than previous reports. The optimized solid-liquid-gas (carbon-electrolyte-Cl2 ) triple interfaces further contribute to a maximum reversible capacity and cycle life of 2,000â mAh g-1 and 250â cycles, respectively. This study establishes a universal approach for improving the sluggish kinetics of conversion-type battery reactions, and provides a new paradigm to resolve the long-standing dilemma between high energy and power densities in energy storage devices.
RESUMEN
Constructing the backbones of polymers with metal atoms is an attractive strategy to develop new functional polymeric materials, but it has yet to be studied due to synthetic challenges. Here, metal atoms are interconnected as the backbones of polymers to yield metal-backboned polymers (MBPs). Rational design of multidentate ligands synthesized via an efficient iterative approach leads to the successful construction of a series of nickel-backboned polymers (NBPs) with well-defined lengths and up to 21 nickel atoms, whose structures are systematically confirmed. These NBPs exhibit strong and length-depended absorption with narrow band gaps, offering promising applications in optoelectronic devices and semiconductors. We also demonstrate the high thermal stability and solution processsability of such nickel-backboned polymers. Our results represent a new opportunity to design and synthesize a variety of new metal-backboned polymers for promising applications in the future.
RESUMEN
Sluggish CO2 reduction/evolution kinetics at cathodes seriously impede the realistic applications of Li-CO2 batteries. Herein, synergistic photoelectric effect and plasmonic interaction are introduced to accelerate CO2 reduction/evolution reactions by designing a silver nanoparticle-decorated titanium dioxide nanotube array cathode. The incident light excites energetic photoelectrons/holes in titanium dioxide to overcome reaction barriers, and induces the intensified electric field around silver nanoparticles to enable effective separation/transfer of photogenerated carriers and a thermodynamically favorable reaction pathway. The resulting Li-CO2 battery demonstrates ultra-low charge voltage of 2.86â V at 0.10â mA cm-2 , good cycling stability with 86.9 % round-trip efficiency after 100 cycles, and high rate capability at 2.0â mA cm-2 . This work offers guidance on rational cathode design for advanced Li-CO2 batteries and beyond.
RESUMEN
In hydrogen production, the anodic oxygen evolution reaction (OER) limits the energy conversion efficiency and also impacts stability in proton-exchange membrane water electrolyzers. Widely used Ir-based catalysts suffer from insufficient activity, while more active Ru-based catalysts tend to dissolve under OER conditions. This has been associated with the participation of lattice oxygen (lattice oxygen oxidation mechanism (LOM)), which may lead to the collapse of the crystal structure and accelerate the leaching of active Ru species, leading to low operating stability. Here we develop Sr-Ru-Ir ternary oxide electrocatalysts that achieve high OER activity and stability in acidic electrolyte. The catalysts achieve an overpotential of 190 mV at 10 mA cm-2 and the overpotential remains below 225 mV following 1,500 h of operation. X-ray absorption spectroscopy and 18O isotope-labeled online mass spectroscopy studies reveal that the participation of lattice oxygen during OER was suppressed by interactions in the Ru-O-Ir local structure, offering a picture of how stability was improved. The electronic structure of active Ru sites was modulated by Sr and Ir, optimizing the binding energetics of OER oxo-intermediates.
RESUMEN
A flexible fiber acoustic transducer is created by designing a parallel configuration of a Rubidium iron boron (NdFeB) magnet fiber and an aluminum fiber. The former provides a stable magnet field, while the latter vibrates to phonate upon applying alternating current or generates alternating voltage in the sound field. This single device exhibits dual functions as a loudspeaker or a microphone. As a fiber loudspeaker, it can generate 40-60 dB of audible (20 Hz-20 kHz) and directional sounds which can be used for blind navigation and controllable sound field distribution. The fiber acoustic transducer functions as a microphone when external sound waves force the aluminum fiber to vibrate. After the fiber microphones are woven into several different positions of a piece of clothing, the sound source can be accurately located based on the time differences reaching different microphones. This wearable fiber acoustic transducer is promising to be used to quickly search people in trouble during emergency rescue activities such as earthquakes or fires.
Asunto(s)
Acústica , Transductores , Fenómenos Electromagnéticos , Humanos , SonidoRESUMEN
Electronic textiles may revolutionize many fields, such as communication, health care and artificial intelligence. To date, unfortunately, computing with them is not yet possible. Memristors are compatible with the interwoven structure and manufacturing process in textiles because of its two-terminal crossbar configuration. However, it remains a challenge to realize textile memristors owing to the difficulties in designing advanced memristive materials and achieving high-quality active layers on fiber electrodes. Herein we report a robust textile memristor based on an electrophoretic-deposited active layer of deoxyribonucleic acid (DNA) on fiber electrodes. The unique architecture and orientation of DNA molecules with the incorporation of Ag nanoparticles offer the best-in-class performances, e.g., both ultra-low operation voltage of 0.3â V and power consumption of 100â pW and high switching speed of 20â ns. Fundamental logic calculations such as implication and NAND are demonstrated as functions of textile chips, and it has been thus integrated with power-supplying and light emitting modules to demonstrate an all-fabric information processing system.
RESUMEN
Metal halide perovskites exhibit outstanding optoelectronic properties: superior charge carrier mobilities, low densities of deep trap states, high photoluminescence quantum yield, and wide color tunability. The introduction of dopant ions provides pathways to manipulate the electronic and chemical features of perovskites. In metal halide perovskites ABX3, where A is a monovalent cation (e.g., methylammonium (MA+), Cs+), B is the divalent metal ion(s) (e.g., Pb2+, Sn2+), and X is the halide group (e.g., Cl-, Br-, or I-), the isovalent exchange of A- and X-site ions has been widely accomplished; in contrast, strategies to exchange B-site cations are underexamined. The activation energies for vacancy-mediated diffusion of B-site cations are much higher than those for A- and X-sites, leading to slow doping processes and low doping ratios. Herein we demonstrate a new method that exchanges B-site cations in perovskites. We design a series of metal carboxylate solutions that anchor on the perovskite surface, allowing fast and efficient doping of B-sites with both homovalent and heterovalent cations (e.g., Sn2+, Zn2+, Bi3+) at room temperature. The doping process in the reduced-dimensional perovskites is complete within 1 min, whereas a similar reaction only leads to the surface attachment of dopant ions in three-dimensional structures. We offer a model based on ammonium extraction and surface ion-pair substitution.
RESUMEN
Over the past ten years, electricity generation from water in carbon-based materials has aroused increasing interest. Water-induced mechanical-to-electrical conversion has been discovered in carbon nanomaterials, including carbon nanotubes and graphene, through the interaction with flowing water as well as moisture. In this Concept article, we focus on the basic principles of electric energy harvesting from flowing water through carbon nanomaterials, and summarize the material modification and structural design of these nanogenerators. The current challenges and potential applications of power conversion with carbon nanomaterials are finally highlighted.
RESUMEN
Clinically significant yeast isolates were collected via Taiwan Surveillance of Antimicrobial Resistance of Yeasts (TSARY) in 2014, and mixed infections were investigated. Among 44 out of 1092 specimens containing multiple species, 17, 11, 5, 3, and 8 were from urine, sputum, blood, ascites, and 6 others, respectively. There predominant combinations of mixed infection were 14 Candida albicans/Candida glabrata, 13 C. albicans/Candida tropicalis, and 9 C. glabrata/C. tropicalis. Furthermore, we also detected fluconazole resistant isolates Candida norvegensis and Candida krusei. Hence, it is important to accurately identify the species with different drug susceptibilities when they are in the same specimen.
Asunto(s)
Candida/clasificación , Candidiasis/microbiología , Coinfección/epidemiología , Coinfección/microbiología , Farmacorresistencia Fúngica/efectos de los fármacos , Fluconazol/farmacología , Antifúngicos/farmacología , Candida/aislamiento & purificación , Candidiasis/epidemiología , Monitoreo Epidemiológico , Humanos , Pruebas de Sensibilidad Microbiana , Prevalencia , Factores de Riesgo , Taiwán/epidemiologíaRESUMEN
Electricity generation from flowing water has been developed for over a century and plays a critical role in our lives. Generally, heavy and complex facilities are required for electricity generation, while using these technologies for applications that require a small size and high flexibility is difficult. Here, we developed a fluidic nanogenerator fiber from an aligned carbon nanotube sheet to generate electricity from any flowing water source in the environment as well as in the human body. The power conversion efficiency reached 23.3 %. The fluidic nanogenerator fiber was flexible and stretchable, and the high performance was well-maintained after deformation over 1 000 000 cycles. The fiber also offered unique and promising advantages, such as the ability to be woven into fabrics for large-scale applications.
RESUMEN
For various applications, it is challenging but essential to obtain complex tunable mechanical actuations in response to environmental stimuli. Here, a general and effective strategy is developed to produce multiple types of photomechanical actuation (from phototropic/apheliotropic bending to three-dimensional helical buckling) by manipulating the orientation of one-dimensional nanomaterials. These materials are manipulated to mimic plants that generate diverse mechanical motions through the orientation of cellulose fibrils. The photomechanical actuations can be completed in milliseconds and can be performed reversibly without detectable fatigue after 100â¯000 cycles. This capacity to produce multiple types of photomechanical actuation is further developed to produce complex integrated movements, as demonstrated by a light-manipulated robotic arm and a solar energy harvesting system.
RESUMEN
This Review describes the state-of-the-art of wearable electronics (smart textiles). The unique and promising advantages of smart electronic textiles are highlighted by comparing them with the conventional planar counterparts. The main kinds of smart electronic textiles based on different functionalities, namely the generation, storage, and utilization of electricity, are then discussed with an emphasis on the use of functional materials. The remaining challenges are summarized together with important new directions to provide some useful clues for the future development of smart electronic textiles.
RESUMEN
A shape-memory, fiber-shaped supercapacitor is developed by winding aligned carbon nanotube sheets on a shape-memory polyurethane substrate. Despite its flexibility and stretchability, the deformed shapes under bending and stretching can be "frozen" as expected and recovered to the original state when required. Its electrochemical performances are well-maintained during deformation, at the deformed state and after the recovery.
RESUMEN
A new family of hierarchically helical carbon-nanotube fibers with many nano- and micro-scale channels has been synthesized. They demonstrate remarkable mechanical actuations in response to water and moisture. The water or moisture is first rapidly transported through the trunk micron-scale channels and then efficiently infiltrates into the interconnected capillary nanoscale channels, similar to the blood flow in our body. Therefore, rapid and large contraction and rotation of the fiber occurs with a high reversibility. These mechanically actuating fibers are promising for various applications, and smart windows and louvers have been investigated as two demonstrations.