RESUMEN
Enhancing the thermoelectric performance of n-type polycrystalline SnSe is essential, addressing challenges posed by elevated thermal conductivity and compromised power factor inherent in its intrinsic p-type characteristics. This investigation utilized solid-state reactions and spark plasma sintering techniques for the synthesis of n-type SnSe. A significant improvement in the figure of merit (ZT) is achieved through strategic reduction in Se concentration and optimization of crystal orientation. The co-doping with Br and Ge further improves the material; Br amplifies carrier concentration, enhancing electrical conductivity, while Ge introduces effective phonon scattering centers. In the Br/Ge co-doped SnSe sample, thermal conductivity dropped to 0.38 Wm⻹K⻹, yielding a remarkable power factor of 662 µW mK- 2 at 773 K, culminating in a ZT of 1.34. This signifies a noteworthy 605% improvement over the pristine sample, underscoring the pivotal role of Ge doping in enhancing n-type material thermoelectric properties. The enhancement is attributed to Br doping introducing additional electronic states near the valence band, and Ge doping modifying the band structure, fostering resonant states near the conduction band. The Br/Ge co-doping further transforms the band structure, influencing electrical conductivity, Seebeck coefficient, and thermal conductivity, advancing the understanding and application of n-type SnSe materials for superior thermoelectric performance.
RESUMEN
A bacterial strain designated PU5-4T was isolated from the mealworm (the larvae of Tenebrio molitor) intestines. It was identified to be Gram-stain-negative, strictly aerobic, rod-shaped, non-motile, and non-spore-forming. Strain PU5-4T was observed to grow at 10-40â°C, at pH 7.0-10.0, and in the presence of 0-3.0â% (w/v) NaCl. Phylogenetic analysis based on 16S rRNA gene sequences indicated that strain PU5-4T should be assigned to the genus Sphingobacterium. The 16S rRNA gene sequence similarity analysis showed that strain PU5-4T was closely related to the type strains of Sphingobacterium lactis DSM 22361T (98.49â%), Sphingobacterium endophyticum NYYP31T (98.11â%), Sphingobacterium soli NCCP 698T (97.69â%) and Sphingobacterium olei HAL-9T (95.73â%). The predominant isoprenoid quinone is MK-7. The major fatty acids were identified as iso-C15â:â0, iso-C17â:â03-OH and summed feature 3 (C16â:â1 ω7c and/or C16â:â1 ω6c) and summed feature 9 (iso-C17â:â0 ω9c). The polar lipids are phosphatidylethanolamine, one unidentified phospholipid, and six unidentified lipids. The genomic DNA G+C content of strain PU5-4T is 40.24 mol%. The average nucleotide identity of strain PU5-4T exhibited respective values of 73.88, 73.37, 73.36 and 70.84â% comparing to the type strains of S. lactis DSM 22361T, S. soli NCCP 698T, S. endophyticum NYYP31T and S. olei HAL-9T, which are below the cut-off level (95-96â%) for species delineation. Based on the above results, strain PU5-4T represents a novel species of the genus Sphingobacterium, for which the name Sphingobacterium temoinsis sp. nov. is proposed. The type strain is PU5-4T (=CGMCC 1.61908T=JCM 36663T).
Asunto(s)
Técnicas de Tipificación Bacteriana , Composición de Base , ADN Bacteriano , Ácidos Grasos , Intestinos , Filogenia , ARN Ribosómico 16S , Análisis de Secuencia de ADN , Sphingobacterium , Tenebrio , Vitamina K 2 , ARN Ribosómico 16S/genética , Ácidos Grasos/análisis , ADN Bacteriano/genética , Sphingobacterium/genética , Sphingobacterium/aislamiento & purificación , Sphingobacterium/clasificación , Animales , Intestinos/microbiología , Vitamina K 2/análogos & derivados , Vitamina K 2/análisis , Tenebrio/microbiología , Fosfatidiletanolaminas , Larva/microbiología , Fosfolípidos/análisisRESUMEN
The study of nanocrystal self-assembly into superlattices or superstructures is of great significance in nanoscience. Carbon nitride quantum dots (CNQDs), being a promising new group of nanomaterials, however, have hardly been explored in their self-organizing behavior. Here we report of a unique irradiation-triggered self-assembly and recrystallization phenomenon of crystalline CNQDs (c-CNQDs) terminated by abundant oxygen-containing groups. Unlike the conventional self-assembly of nanocrystals into ordered superstructures, the photoinduced self-assembly of c-CNQDs resembles a "click reaction" process of macromolecules, in which the activated -OH and -NH2 functional groups along the perimeters initiate cross-linking of adjacent QDs through a photocatalytic effect. Our findings unveil fundamental physiochemical features of CNQDs and open up new possibilities of manipulating carbon nitride nanomaterials via controlled assembly. Prospects for potential applications are discussed as well.
RESUMEN
An n-type Bi-doped SnSe was synthesized by a facile solution method followed by spark plasma sintering. We used bismuth(III) 2-ethyhexanoate as a cationic dopant precursor, which can absorb on the powder surface and then diffuse into the lattice to realize the substitution of Sn by Bi. A strip structure with low-angle boundary was constructed for effective phonon scattering. With increasing content of Bi, the carrier concentration decreased from 1.35 × 1019 cm-3 (p-type) in undoped SnSe to 4.7 × 1014 cm-3 (n-type) in Sn0.99Bi0.01Se and then increased to 1.3 × 1015 cm-3 (n-type) in Sn0.97Bi0.03Se. The Seebeck coefficient changed from positive to negative and presented n-type conducting behavior in the whole measured temperature range from 300 to 773 K, reaching a maximum absolute value of â¼900 µV K-1 at room temperature and â¼300 µV K-1 at 773 K. Considering the rich variety of metal 2-ethylhexanoates, higher thermoelectric performance is expected by different cationic doping in solution-synthesized nanomaterials.
RESUMEN
Polycrystalline p-type Cu1.8S composites with WSe2 nanoparticles were fabricated by the mechanical alloying method combined with the spark plasma sintering technique. The Seebeck coefficient was significantly enhanced by the optimized carrier concentration, while the thermal conductivity was simultaneously decreased due to the refined grain and WSe2 nanoparticles. An enhanced Seebeck coefficient of 110 µV K-1 and a reduced thermal conductivity of 0.68 W m-1 K-1 were obtained for the Cu1.8S + 1 wt% WSe2 sample at 773 K, resulting in a remarkably enhanced peak ZT of 1.22 at 773 K, which is 2.5 times higher than that (0.49 at 773 K) of a pristine Cu1.8S sample. The cheap and environmentally friendly Cu1.8S-based materials with enhanced properties may find promising applications in thermoelectric devices.
RESUMEN
High thermoelectric performance of n-type PbTe is urgently needed to match its p-type counterpart. Here, we show a peak ZT â¼ 1.5 at 723 K and a record high average ZT > 1.0 at 300-873 K realized in n-type PbTe by synergistically suppressing lattice thermal conductivity and enhancing carrier mobility by introducing Cu2Te inclusions. Cu performs several outstanding roles: Cu atoms fill the Pb vacancies and improve carrier mobility, contributing to an unexpectedly high power factor of â¼37 µW cm-1 K-2 at 423 K; Cu atoms filling Pb vacancies and Cu interstitials both induce local disorder and, together with nano- and microscale Cu-rich precipitates and their related strain fields, lead to a very low lattice thermal conductivity of â¼0.38 Wm-1 K-1 in PbTe-5.5%Cu2Te, approaching the theoretical minimum value of â¼0.36 Wm-1 K-1. This work provides an effective strategy to enhance thermoelectric performance by simultaneously improving electrical and thermal transport properties.
RESUMEN
P-type SnSe compositing with 2D MoSe2 materials have been prepared by the solid solution method followed by the spark plasma sintering technique. The total thermal conductivities of SnSe/MoSe2 composites were found to be higher than for pristineSnSe at room temperature; and the disparity between them becomes smaller at higher temperatures, where the low thermal conductivities remained. Both the carrier concentration and the carrier mobility were significantly improved after MoSe2 was introduced into the SnSe matrix along the direction perpendicular to the pressing direction, leading to an extraordinary enhancement in electrical transport performance. The maximum ZT of 0.5 was obtained at 773 K for SnSe + 1.5%MoSe2 along the direction perpendicular to the pressing direction; this value is 1.5 times as large as that of the pristine SnSe.
RESUMEN
Lead-free IV-VI semiconductors SnQ (Q = Te, Se, S) are deemed as promising thermoelectric (TE) materials. In this work, we designed a hydrothermal route to selectively synthesize single phase SnTe, SnSe and SnS nanopowders. For all three samples, the phase structure were characterized by x-ray diffraction, SnTe particles with octahedron structure and SnSe/SnS particles with plate-like shape were observed by field emission scanning electron microscopy and transmission electron microscopy, the formation mechanism was discussed in detail. Then, SnTe, SnSe and SnS nanopowders were densified by spark plasma sintering for investigating TE properties. It was noticed that SnSe and SnS exhibited remarkably anisotropy in both electrical and thermal properties attributed to the layered crystal structure. The highest ZT values 0.79 at 873 K, 0.21 at 773 K, and 0.13 at 773 K were achieved for SnTe, SnSe and SnS bulk samples, respectively.
RESUMEN
We report that K2Bi8Se13 exhibits multiple conduction bands that lie close in energy and can be activated through doping, leading to a highly enhanced Seebeck coefficient and a high power factor with elevated temperature. Meanwhile, the large unit cell, complex low symmetry crystal structure, and nondirectional bonding lead to the very low lattice thermal conductivity of K2Bi8Se13, ranging between 0.42 and 0.20 W m-1 K-1 in the temperature interval 300-873 K. Experimentally, we further support the low thermal conductivity of K2Bi8Se13 using phonon velocity measurements; the results show a low average phonon velocity (1605 ms-1), small Young's modulus (37.1 GPa), large Grüneisen parameter (1.71), and low Debye temperature (154 K). A detailed investigation of the microstructure and defects was carried out using electron diffraction and transmission microscopy which reveal the presence of a K2.5Bi8.5Se14 minor phase intergrown along the side of the K2Bi8Se13 phase. The combination of enhanced power factor and low thermal conductivity results in a high ZT value of â¼1.3 at 873 K in electron doped K2Bi8Se13 material.
RESUMEN
We present in this manuscript that enhanced thermoelectric performance can be achieved in polycrystalline SnSe prepared by hydrothermal reaction and spark plasma sintering (SPS). X-ray diffraction (XRD) patterns revealed strong orientation along the [l 0 0] direction in bulk samples, which was further confirmed by microstructural observation through transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). It was noticed that the texturing degree of bulk samples could be controlled by sintering temperature during the SPS process. The best electrical transport properties were found in the sample which sintered at 450 °C in the direction vertical to the pressing direction, where the highest texturing degree and mass density were achieved. Coupled with the relatively low thermal conductivity, an average ZT of â¼ 0.38, the highest ever reported in pristine polycrystalline SnSe was obtained. This work set up a forceful example that a texture-control approach can be utilized to enhance the thermoelectric performance effectively.
RESUMEN
We revisited and investigated a layer-structured thermoelectric material AgCrSe2, which has an extremely low thermal conductivity. After using both differential scanning calorimetry and a comparative laser flash method, we realized that the specific heat of this material, the main contributor to the reported low thermal conductivity, is unlikely to be way below the Dulong-Petit limit as revealed in the literature. Besides, our in situ X-ray diffraction pattern up to 873 K indicated the instability of AgCrSe2 over 723 K, where it begins to decompose into Cr2Se3 and Ag2Se. This unexpected decomposition phenomenon resulted in the gradual increment of specific heat and thermal diffusivity, hence the deterioration of the overall thermoelectric performance. We deliberately introduced Ag and Cr vacancies into the lattice for carrier concentration optimization and could achieve an optimal figure of merit of ZT â¼ 0.5 at 723 K in the nominal composition Ag0.96CrSe2 in the direction perpendicular to the sintering press. Our findings suggest that more thorough investigations are necessary to ensure that AgCrSe2 is a promising thermoelectric material.
RESUMEN
OBJECTIVE: We studied the changes in soil bacterial communities induced by ground mulch managements at different apple growth periods. METHODS: We adopted the denaturing gradient gel electrophoresis (DGGE) with PCR-amplified 16S rRNA fragments to determine soil bacterial community structure and diversity. RESULTS: Soil bacterial community structure with different ground mulch managements were significantly different. Both the mulch management strategies and apple growth periods affected the predominant groups and their abundance in soil bacterial communities. Grass mulch and cornstalk mulch treatments had higher bacterial diversity and richness than the control at young fruit period and fruit expanding period, whereas film mulch treatment had no significant difference compared with the control. During mature period, bacterial diversity in the control reached its maximum, which may be ascribed to the rapid growth and reproduction of the r-selection bacteria. The clustering and detrended correspondence analysis revealed that differences in soil bacterial communities were closely correlated to apple growth periods and ground mulch managements. Soil samples from the grass mulch and cornstalk mulch treatments clustered together while those mulched with plastic film treatment were similar to the control. The most abundant phylum in soil bacterial community was Proteobacteria followed by Bacteroidetes. Some other phyla were also detected, such as Acidobacteria, Firmicutes, Actinobacteria and Chloroflexi. CONCLUSION: Mulching with plant (Grass/Cornstalk) had great effects on soil bacterial community structure and enhanced the diversity while film mulch management had no significant effects.
Asunto(s)
Agricultura/métodos , Bacterias/aislamiento & purificación , Biodiversidad , Malus/crecimiento & desarrollo , Microbiología del Suelo , Riego Agrícola , Bacterias/clasificación , Bacterias/genética , China , Frutas/crecimiento & desarrollo , Datos de Secuencia Molecular , Filogenia , Suelo/químicaRESUMEN
Converting CO2 into energy-rich fuels by using solar energy is a sustainable solution that promotes a carbon-neutral economy and mitigates our reliance on fossil fuels. However, affordable and efficient CO2 conversion remains an ongoing challenge. Here, we introduce polymeric g-C3N4 into the pores of a hollow In2O3 microtube. This architecture results in a compact and staggered arrangement between g-C3N4 and In2O3 components with an increased contact interface for improved charge separation. The hollow interior further contributes to strengthening light absorption. The resulting g-C3N4-In2O3 hollow tubes exhibit superior activity (274 µmol·g-1·h-1) toward CO2 to CO conversion in comparison with those of pure In2O3 and g-C3N4 (5.5 and 93.6 µmol·g-1·h-1, respectively), underlining the role of integrating g-C3N4 and In2O3 in this advanced system. This work offers a strategy for the advanced design and preparation of hollow heterostructures for optimizing CO2 adsorption and conversion by integrating inorganic and organic semiconductors.
RESUMEN
Sclareolide, a natural product with bioactive and fragrant properties, is not only utilized in the food, healthcare, and cosmetics industries but also serves as a precursor for the production of ambroxide and some bioactive compounds. Currently, there are three primary methods for producing sclareolide: direct extraction from plants, chemical synthesis using sclareol as a precursor, and the biotransformation of sclareol. Here, we established a platform for producing sclareolide through a modular coculture system with Saccharomyces cerevisiae and Cryptococcus albidus ATCC 20918. S. cerevisiae was engineered for de novo sclareol biosynthesis from glucose, while C. albidus enabled the production of sclareolide via sclareol biotransformation. To enhance the supply of sclareol, a recombinant yeast strain was constructed through metabolic engineering to produce 536.2 mg/L of sclareol. Further improvement of the coculture system for sclareolide production was achieved by incorporating Triton X-100 facilitated intermediate permeability, inoculation proportion adjustment, and culture temperature optimization. These refinements culminated in a sclareolide yield of 626.3 mg/L. This study presents a novel streamlined and efficient approach for sclareolide preparation, showcasing the potential of the microbial consortium in sustainable bioproduction.
RESUMEN
The development of composite photocatalysts with high charge transfer efficiency, great visible light absorption, and quick recovery has aroused the interest of many researchers. Herein, based on the hydrothermal assisted vacuum freeze drying method, CdS, Fe3O4, and N-TiO2 were, respectively, fixed in the inner, middle, and outer layers of nitrogen-doped graphene aerogel for preparation of the site-specific magnetic porous Z-scheme CdS/Fe3O4@N-doped graphene aerogel microtube/N-doped TiO2 (CdS/Fe3O4@NGAM/N-TiO2) photocatalyst. For the composite, Fe3O4@NGAM carrier with porous and tubular structure not only helps the recycle and reactants/productions mass transport in the photocatalytic process but also ensures the well-steered transfer of electrons and holes from CdS and N-TiO2 in the Z-type heterojunction system, greatly improving the separation of photogenerated carriers. Besides, Fe3O4 can also work as a Fenton catalyst to activate hydrogen peroxide which is generated in situ by CdS. Thus, the CdS/Fe3O4@NGAM/N-TiO2 composite presents excellent degradation efficiencies towards methyl orange ((MO) 98% removal rate within 50 min), bisphenol A ((BPA) 96% removal rate within 50 min), tetracycline hydrochloride ((TCH) 96% removal rate within 120 min) and strong stabilities after 6 cycles. The free radical removal experiments show that ·O2- and ·OH are the main active substances of catalysis, which further confirms the synergistic effect of photocatalysis and Fenton catalysis.
Asunto(s)
Grafito , Grafito/química , Porosidad , Peróxido de Hidrógeno/química , Catálisis , Fenómenos MagnéticosRESUMEN
Exploring new near-room-temperature thermoelectric materials is significant for replacing current high-cost Bi2Te3. This study highlights the potential of Ag2Se for wearable thermoelectric electronics, addressing the trade-off between performance and flexibility. A record-high ZT of 1.27 at 363 K is achieved in Ag2Se-based thin films with 3.2 at.% Te doping on Se sites, realized by a new concept of doping-induced orientation engineering. We reveal that Te-doping enhances film uniformity and (00l)-orientation and in turn carrier mobility by reducing the (00l) formation energy, confirmed by solid computational and experimental evidence. The doping simultaneously widens the bandgap, resulting in improved Seebeck coefficients and high power factors, and introduces TeSe point defects to effectively reduce the lattice thermal conductivity. A protective organic-polymer-based composite layer enhances film flexibility, and a rationally designed flexible thermoelectric device achieves an output power density of 1.5 mW cm-2 for wearable power generation under a 20 K temperature difference.
RESUMEN
The significant role of metal particle geometry in dictating catalytic activity, selectivity, and stability is well established in heterocatalysis. However, this topic is rarely explored in semiconductor-metal hybrid photocatalytic systems, primarily due to the lack of synthetic control over this feature. Herein, we present a new synthetic route for the deposition of metallic Cu nanoparticles with spherical, elliptic, or cubic geometrical shapes, which are selectively grown on one side of the well-established CdSe@CdS nanorod photocatalytic system. An additional multipod morphology in which several nanorod branches are combined on a single Cu domain is presented as well. Cu is an earth-abundant low-cost catalyst known to promote a diverse gallery of organic transformations and is an excellent thermal and electrical conductor with interesting plasmonic properties. Its deposition on cadmium chalcogenide nanostructures is enabled here via mitigation of the reaction kinetics such that the cation exchange reaction is prevented. The structural diversity of these sophisticated nanoscale hybrid systems lays the foundations for shape-activity correlation studies and employment in various applications.
RESUMEN
The drastically increasing consumption of petroleum-derived plastics hasserious environmental impacts and raises public concerns. Poly(ethylene terephthalate) (PET) is amongst the most extensively produced synthetic polymers. Enzymatic hydrolysis of PET recently emerged as an enticing path for plastic degradation and recycling. In-lab directed evolution has revealed the great potential of PET hydrolases (PETases). However, the time-consuming and laborious PETase assays hinder the identification of effective variants in large mutant libraries. Herein, we devise and validate a dual fluorescence-based high-throughput screening (HTS) assay for a representative IsPETase. The two-round HTS of a pilot library consisting of 2850 IsPETase variants yields six mutant IsPETases with 1.3-4.9 folds improved activities. Compared to the currently used structure- or computational redesign-based PETase engineering, this HTS approach provides a new strategy for discovery of new beneficial mutation patterns of PETases.
Asunto(s)
Hidrolasas , Tereftalatos Polietilenos , Hidrolasas/metabolismo , Tereftalatos Polietilenos/metabolismo , Ensayos Analíticos de Alto Rendimiento , Etilenos , PlásticosRESUMEN
Herein, an n-type Ag2Se thermoelectric flexible thin film has been fabricated on a polyimide (PI) substrate via a novel thermal diffusion method, and the thermoelectric performance is well-optimized by adjusting the pressure and temperature of thermal diffusion. All of the Ag2Se films are beneficial to grow (013) preferred orientations, which is conducive to performing a high Seebeck coefficient. By increasing the thermal diffusion temperature, the electrical conductivity can be rationally regulated while maintaining the independence of the Seebeck coefficient, which is mainly attributed to the increased electric mobility. As a result, the fabricated Ag2Se thin film achieves a high power factor of 18.25 µW cm-1 K-2 at room temperature and a maximum value of 21.7 µW cm-1 K-2 at 393 K. Additionally, the thermal diffusion method has resulted in a wave-shaped buckling, which is further verified as a promising structure to realize a larger temperature difference by the simulation results of finite element analysis (FEA). Additionally, this unique surface morphology of the Ag2Se thin film also exhibits outstanding mechanical properties, for which the elasticity modulus is only 0.42 GPa. Finally, a flexible round-shaped module assembled with Sb2Te3 has demonstrated an output power of 166 nW at a temperature difference of 50 K. This work not only introduces a new method of preparing Ag2Se thin films but also offers a convincing strategy of optimizing the microstructure to enhance low-grade heat utilization efficiency.
RESUMEN
For thermoelectric thin film, the substrate plays an important role during the growing process and produces effects on its thermoelectric properties. Some special kinds of substrates provide an optimal combination of influences on both the structure and thermoelectric properties. In this work, Bi-Sb-Te films are deposited on Si substrates with different initial orientations by magnetron sputtering in two ways: with and without a pre-coating process. The preferred orientations of the Bi-Sb-Te films are greatly affected by the substrates, in which the thin film tends to deposit on Si substrate with (100) initial orientation and high (015)-texture, while the (00l)-textured Bi-Sb-Te film easily deposits on Si substrate with (110) initial orientation. The experimental and theoretical calculation results indicate that Bi-Sb-Te film with (00l)-texture presents good electrical conductivity and a higher power factor than that of film with (015)-texture.