Multifunctional Umbrella: In Situ Interface Film Forming on the High-Voltage LiCoO2 Cathode by a Tiny Amount of Nanoporous Polymer Additives for High-Energy-Density Li-Ion Batteries.

The LiCoO2 (LCO) cathode is foreseen for extensive commercial applications owing to its high specific capacity and stability. Therefore, there is considerable interest in further enhancing its specific capacity by increasing the charging voltage. However, single-crystal LCO suffers from a significant capacity degradation when charged to 4.5 V due to the irreversible phase transition and unstable structure. Herein, an ultra-small amount (0.5% wt. in the electrode) of multi-functional PIM-1 (a polymer with intrinsic microporosity) additive is utilized to prepare a kind of binder-free electrode. PIM-1 modulates the solvation structure of LiPF6 due to its unique structure, which helps to form a stable, robust, and inorganic-rich cathod-eelectrolyte interphase (CEI) film on the surface of LCO at a high voltage of 4.5 V. This reduces the irreversible phase transition of LCO, thereby enhancing the cyclic stability and improving the rate performance, providing new perspectives for the electrodes fabrication and improving LCO-based high-energy-density cathodes.

Defensive and Ion Conductive Surface Layer Enables High Rate and Durable O3-type NaNi1/3 Fe1/3 Mn1/3 O2 Sodium-Ion Battery Cathode.

Na-based layered transition metal oxides with an O3-type structure are considered promising cathodes for sodium-ion batteries. However, rapid capacity fading, and poor rate performance caused by serious structural changes and interfacial degradation hamper their use. In this study, a NaPO3 surface modified O3-type layered NaNi1/3 Fe1/3 Mn1/3 O2 cathode is synthesized, with improved high-voltage stability through protecting layer against acid attack, which is achieved by a solid-gas reaction between the cathode particles and gaseous P2 O5 . The NaPO3 nanolayer on the surface effectively stabilizes the crystal structure by inhibiting surface parasitic reactions and increasing the observed average voltage. Superior cyclic stability is exhibited by the surface-modified cathode (80.1% vs 63.6%) after 150 cycles at 1 C in the wide voltage range of 2.0 V-4.2 V (vs Na+ /Na). Moreover, benefiting from the inherent ionic conduction of NaPO3 , the surface-modified cathode presents excellent rate capability (103 mAh g-1  vs 60 mAh g-1 ) at 10 C. The outcome of this study demonstrates a practically relevant approach to develop high rate and durable sodium-ion battery technology.

The development of a next-generation sequencing panel targeting cannabinoid synthase genes to distinguish between marijuana and hemp.

Hemp and marijuana, both derived from Cannabis sativa L. (C. sativa), are subject to divergent legal regulations due to their different Δ9-tetrahydrocannabinol (Δ9-THC) contents. Cannabinoid synthase genes are considered the key enzymes that determine the chemical composition or chemotype of a particular cultivar. However, existing methods for crop type differentiation based on previous synthase gene theories have limitations in terms of precision and specificity, and a wider range of cannabis varieties must be considered when examining cannabis-based genetic markers. A custom next-generation sequencing (NGS) panel was developed targeting all synthase genes, including Δ9-THC acid synthase, cannabidiolic acid synthase, and cannabichromenic acid synthase, as well as the pseudogenes across diverse C. sativa samples, spanning reference hemp and marijuana, commercial hemp derivatives, and seized marijuana extracts. Interpretation of NGS data revealed a relationship between genotypes and underlying chemotypes, with the principal component analysis indicating a clear distinction between hemp and marijuana clusters. This differentiation was attributed to variations in both synthase genes and pseudogene variants. Finally, this study proposes a genetic cannabis classification method using a differentiation flow chart with novel synthase markers. The flow chart successfully differentiated hemp from marijuana with a 1.3% error rate (n = 147).

Thin-film lithium niobate electro-optic isolator fabricated by photolithography assisted chemo-mechanical etching.

We report an electro-optic isolator fabricated on thin-film lithium niobate by photolithography-assisted chemo-mechanical etching that shows an isolation of 39.50 dB and an overall fiber-to-fiber loss of 2.6 dB.

Characterization of tumoricidal activities mediated by a novel immune cell regimen composing interferon-producing killer dendritic cells and tumor-specific cytotoxic T lymphocytes.

BACKGROUND: Although immune cell therapy has long been used for treating solid cancer, its efficacy remains limited. Interferon (IFN)-producing killer dendritic cells (IKDCs) exhibit cytotoxicity and present antigens to relevant cells; thus, they can selectively induce tumor-associated antigen (TAA)-specific CD8 T cells and may be useful in cancer treatment. Various protocols have been used to amplify human IKDCs from peripheral sources, but the complexity of the process has prevented their widespread clinical application. Additionally, the induction of TAA-specific CD8 T cells through the adoptive transfer of IKDCs to immunocompromised patients with cancer may be insufficient. Therefore, we developed a method for generating an immune cell-based regimen, Phyduxon-T, comprising a human IKDC counterpart (Phyduxon) and expanded TAA-specific CD8 T cells. METHODS: Peripheral blood mononuclear cells from ovarian cancer patients were cultured with human interleukin (hIL)-15, hIL-12, and hIL-18 to generate Phyduxon-T. Then, its phenotype, cytotoxicity, and antigen-presenting function were evaluated through flow cytometry using specific monoclonal antibodies. RESULTS: Phyduxon exhibited the characteristics of both natural killer and dendritic cells. This regimen also exhibited cytotoxicity against primary ovarian cancer cells and presented TAAs, thereby inducing TAA-specific CD8 T cells, as evidenced by the expression of 4-1BB and IFN-γ. Notably, the Phyduxon-T manufacturing protocol effectively expanded IFN-γ-producing 4-1BB+ TAA-specific CD8 T cells from peripheral sources; these cells exhibited cytotoxic activities against ovarian cancer cells. CONCLUSIONS: Phyduxon-T, which is a combination of natural killer cells, dendritic cells, and TAA-specific CD8 T cells, may enhance the efficacy of cancer immunotherapy.

Identification and Characterization of Pectate Lyase as a Novel Allergen in Artemisia sieversiana Pollen.

INTRODUCTION: Artemisia species are widely spread in north hemisphere. Artemisia sieversiana pollen is one of the common pollen allergens in the north of China. At present, seven allergens were identified and had been listed officially from A. sieversiana pollen, but the remaining allergens are still insufficiently studied, which need to be found. METHODS: Pectate lyase was purified from the extracts of A. sieversiana pollen by anion exchange, size exclusion, and HPLC-hydrophobic interaction chromatography. The gene of A. sieversiana pectate lyase (Art si pectate lyase) was cloned and expressed in Escherichia coli. The enzyme activity and circular dichroism (CD) spectrum of natural and recombinant proteins were analyzed. The allergenicity of Art si pectate lyase was characterized by enzyme-linked immunosorbent assay (ELISA), Western blot, inhibition ELISA, and basophil activation test. The allergen's physicochemical properties, three-dimensional structure, sequence profiles with homologous allergens and phylogenetic tree were analyzed by in silico methods. RESULTS: Natural Art si pectate lyase (nArt si pectate lyase) was purified from A. sieversiana pollen extracts by three chromatographic strategies. The cDNA sequence of Art si pectate lyase had a 1191-bp open reading frame encoding 396 amino acids. Both natural and recombinant pectate lyase (rArt si pectate lyase) exhibited similar CD spectrum, and nArt si pectate lyase had higher enzymatic activity. Moreover, the specific immunoglobulin E (IgE) binding rate against nArt si pectate lyase and rArt si pectate lyase was determined as 40% (6/15) in patients' serum with Artemisia species pollen allergy by ELISA. The nArt si pectate lyase and rArt si pectate lyase could inhibit 76.11% and 47.26% of IgE binding activities to the pollen extracts, respectively. Art si pectate lyase was also confirmed to activate patients' basophils. Its structure contains a predominant motif of classic parallel helical core, consisting of three parallel ß-sheets, and two highly conserved features (vWiDH, RxPxxR) which may contribute to pectate lyase activity. Moreover, Art si pectate lyase shared the highest sequence identity of 73.0% with Art v 6 among currently recognized pectate lyase allergen, both were clustered into the same branch in the phylogenetic tree. CONCLUSION: In this study, pectate lyase was identified and comprehensively characterized as a novel allergen in A. sieversiana pollen. The findings enriched the allergen information for this pollen and promoted the development of component-resolved diagnosis and molecular therapy of A. sieversiana pollen allergy.

Converting non-neutralizing SARS-CoV-2 antibodies into broad-spectrum inhibitors.

Omicron and its subvariants have rendered most authorized monoclonal antibody-based treatments for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) ineffective, highlighting the need for biologics capable of overcoming SARS-CoV-2 evolution. These mostly ineffective antibodies target variable epitopes. Here we describe broad-spectrum SARS-CoV-2 inhibitors developed by tethering the SARS-CoV-2 receptor, angiotensin-converting enzyme 2 (ACE2), to known non-neutralizing antibodies that target highly conserved epitopes in the viral spike protein. These inhibitors, called receptor-blocking conserved non-neutralizing antibodies (ReconnAbs), potently neutralize all SARS-CoV-2 variants of concern (VOCs), including Omicron. Neutralization potency is lost when the linker joining the binding and inhibitory ReconnAb components is severed. In addition, a bi-functional ReconnAb, made by linking ACE2 to a bi-specific antibody targeting two non-overlapping conserved epitopes, defined here, shows sub-nanomolar neutralizing activity against all VOCs, including Omicron and BA.2. Given their conserved targets and modular nature, ReconnAbs have the potential to act as broad-spectrum therapeutics against SARS-CoV-2 and other emerging pandemic diseases.

GPX3 supports ovarian cancer tumor progression in vivo and promotes expression of GDF15.

OBJECTIVE: We previously reported that high expression of the extracellular glutathione peroxidase GPX3 is associated with poor patient outcome in ovarian serous adenocarcinomas, and that GPX3 protects ovarian cancer cells from oxidative stress in culture. Here we tested if GPX3 is necessary for tumor establishment in vivo and to identify novel downstream mediators of GPX3's pro-tumorigenic function. METHODS: GPX3 was knocked-down in ID8 ovarian cancer cells by shRNA to test the role of GPX3 in tumor establishment using a syngeneic IP xenograft model. RNA sequencing analysis was carried out in OVCAR3 cells following shRNA-mediated GPX3 knock-down to identify GPX3-dependent gene expression signatures. RESULTS: GPX3 knock-down abrogated clonogenicity and intraperitoneal tumor development in vivo, and the effects were dependent on the level of GPX3 knock-down. RNA sequencing showed that loss of GPX3 leads to decreased gene expression patterns related to pro-tumorigenic signaling pathways. Validation studies identified GDF15 as strongly dependent on GPX3. GDF15, a member of the TGF-ß growth factor family, has known oncogenic and immune modulatory activities. Similarly, GPX3 expression positively correlated with pro-tumor immune cell signatures, including regulatory T-cell and macrophage infiltration, and displayed significant correlation with PD-L1 expression. CONCLUSIONS: We show for the first time that tumor produced GPX3 is necessary for ovarian cancer growth in vivo and that it regulates expression of GDF15. The immune profile associated with GPX3 expression in serous ovarian tumors suggests that GPX3 may be an alternate marker of ovarian tumors susceptible to immune check-point inhibitors.

α-linolenic acid ameliorates pentylenetetrazol-induced neuron apoptosis and neurological impairment in mice with seizures via down-regulating JAK2/STAT3 pathway.

Epilepsy ranks fourth among neurological diseases, featuring spontaneous seizures and behavioral and cognitive impairments. Although anti-epileptic drugs are currently available clinically, 30% of epilepsy patients are still ineffective in treatment, and 52% of patients experience serious adverse reactions. In this work, the neuroprotective effect of α-linolenic acid (ALA, a nutrient) in mice and its potential molecular mechanisms exposed to pentylenetetrazol was assessed. The mice were injected with pentetrazol 37 mg/kg, and ALA was intra-gastrically administered for 40 days. The treatment with ALA significantly reduced the overall frequency of epileptic seizures and improved the behavior impairment and cognitive disorder caused by pentetrazol toxicity. In addition, ALA can not only reduce the apoptosis rate of brain neurons in epileptic mice, but also significantly reduce the content of brain inflammatory factors (IL-6, IL-1, and TNF-α). Furthermore, we predicted that the possible targets of ALA in the treatment of epilepsy were JAK2 and STAT3 through molecular docking. Finally, through molecular docking and Western Blot studies, we revealed the potential mechanism of ALA ameliorates pentylenetetrazol-induced neuron apoptosis and neurological impairment in mice with seizures by downregulating the JAK2/STAT3 pathway. This study aimed to investigate the antiepileptic and neuroprotective effects of ALA, as well as explore its potential mechanisms, through the construction of a chronic ignition mouse model via intraperitoneal PTZ injection. The findings of this research provide crucial scientific support for subsequent clinical application studies in this field.

Urine cadmium and urolithiasis: A systematic review and meta-analysis.

Exposure to cadmium may increase risk of urolithiasis, but the results remain inconclusive. This systematic review and meta-analysis aimed to access the association between cadmium exposure and urolithiasis. We searched Medline/PubMed, Embase, Web of Science Core Collection, and Cochrane Central for studies. The primary outcome was the incidence of urolithiasis compared to reference groups. We used relative risk as the summary effect measure. This meta-analysis included eight observational studies and divided into 39 study populations. Among 63,051 subjects, 5018 (7.96%) individuals had urolithiasis. The results indicated that people with an increment of 0.1 µg/g creatinine in urinary cadmium had a 2% increased risk of urolithiasis (pooled relative risk [RR], 1.02; 95% confidence interval [CI], 1.01-1.03) and there is no difference in the risk of urolithiasis in high and low cadmium exposure levels. Meanwhile, people with an increment of 0.1 µg/L in urinary cadmium had a 4% increased risk of urolithiasis (pooled RR, 1.04; 95% CI, 1.02-1.07). Our findings also showed similar associations in both sex, different region (Sweden, China, and Thailand), general and occupational population. The results indicate that cadmium exposure was significantly associated with an elevated risk of urolithiasis. Therefore, it is imperative to take steps to minimize cadmium exposure.

Study on the Anti-Mycobacterium marinum Activity of a Series of Marine-Derived 14-Membered Resorcylic Acid Lactone Derivatives.

With the emergence of drug-resistant strains, the treatment of tuberculosis (TB) is becoming more difficult and there is an urgent need to find new anti-TB drugs. Mycobacterium marinum, as a model organism of Mycobacterium tuberculosis, can be used for the rapid and efficient screening of bioactive compounds. The 14-membered resorcylic acid lactones (RALs) have a wide range of bioactivities such as antibacterial, antifouling and antimalarial activity. In order to further study their bioactivities, we initially constructed a 14-membered RALs library, which contains 16 new derivatives. The anti-M. marinum activity was evaluated in vitro. Derivatives 12, 19, 20 and 22 exhibited promising activity with MIC90 values of 80, 90, 80 and 80 µM, respectively. The preliminary structure-activity relationships showed that the presence of a chlorine atom at C-5 was a key factor to improve activity. Further studies showed that 12 markedly inhibited the survival of M. marinum and significantly reduced the dosage of positive drugs isoniazid and rifampicin when combined with them. These results suggest that 12 is a bioactive compound capable of enhancing the potency of existing positive drugs, and its effective properties make it a very useful leads for future drug development in combating TB resistance.

Polystyrene nanoplastics exposure triggers spermatogenic cell senescence via the Sirt1/ROS axis.

Polystyrene nanoplastics (PS-NPs) have been reported to accumulate in the testes and constitute a new threat to reproductive health. However, the exact effects of PS-NPs exposure on testicular cells and the underlying mechanisms remain largely unknown. The C57BL/6 male mice were orally administered with PS-NPs (80 nm) at different dosages (0, 10, and 40 mg/kg/day) for 60 days, and GC-1 cells were treated with PS-NPs in this study. Enlarged seminiferous tubule lumens and a loose and vacuolated layer of spermatogenic cells were observed in PS-NPs-exposed mice. Spermatogenic cells which may be one of the target cells for this reproductive damage, were decreased in the mice from PS-NPs group. PS-NPs caused spermatogenic cells to undergo senescence, manifested as elevated SA-ß-galactosidase activity and activated senescence-related signaling p53-p21/Rb-p16 pathways, and induced cell cycle arrest. Mechanistically, Gene Ontology (GO) enrichment suggested the key role of reactive oxygen species (ROS) in PS-NPs-induced spermatogenic cell senescence, and this result was confirmed by measuring ROS levels. Moreover, ROS inhibition partially attenuated the senescence phenotype of spermatogenic cells and DNA damage. Using the male health atlas (MHA) database, Sirt1 was filtrated as the critical molecule in the regulation of testicular senescence. PS-NPs induced overexpression of the main ROS generator Nox2, downregulated Sirt1, increased p53 and acetylated p53 in vivo and in vitro, whereas these disturbances were partially restored by pterostilbene. In addition, pterostilbene intervention significantly alleviated the PS-NPs-induced spermatogenic cell senescence and attenuated ROS burst. Collectively, our study reveals that PS-NPs exposure can trigger spermatogenic cell senescence mediated by p53-p21/Rb-p16 signaling by regulating the Sirt1/ROS axis. Importantly, pterostilbene intervention may be a promising strategy to alleviate this damage.

Dexmedetomidine for enhanced recovery after non-intubated video-assisted thoracoscopic surgery.

BACKGROUND: Non-intubated video-assisted thoracoscopic surgery combines a minimally invasive technique with multimodal locoregional analgesia to enhance recovery. The mainstay sedation protocol involves propofol and fentanyl. Dexmedetomidine, given its opioid-sparing effect with minimal respiratory depression, facilitates sedation in non-intubated patients. This study aimed to evaluate the efficacy of dexmedetomidine during non-intubated video-assisted thoracoscopic surgery. METHODS: A total of 114 patients who underwent non-intubated video-assisted thoracoscopic surgery between June 2015 and September 2017 were retrospectively evaluated. Of these, 34 were maintained with dexmedetomidine, propofol, and fentanyl, and 80 were maintained with propofol and fentanyl. After a 1:1 propensity score-matched analysis incorporating sex, body mass index, American Society of Anesthesiologists classification, pulmonary disease and hypertension, the clinical outcomes of 34 pairs of patients were assessed. RESULTS: The dexmedetomidine group showed a significantly lower opioid consumption [10.3 (5.7-15.1) vs. 18.8 (10.0-31.0) mg, median (interquartile range); P = 0.001] on postoperative day 0 and a significantly shorter postoperative length of stay [3 (2-4) vs. 4 (3-5) days, median (interquartile range), P = 0.006] than the control group. During operation, the proportion of vasopressor administration was significantly higher in the dexmedetomidine group [18 (53) vs. 7 (21), patient number (%), P = 0.01]. On the other hand, the difference of the hypotension and bradycardia incidence, short-term morbidity and mortality rates between each group were nonsignificant. CONCLUSIONS: Adding adjuvant dexmedetomidine to propofol and fentanyl is safe and feasible for non-intubated video-assisted thoracoscopic surgery. With its opioid-sparing effect and shorter postoperative length of stay, dexmedetomidine may enhance recovery after surgery.

Incidence and risk factors of postoperative pulmonary complications after oral cancer surgery with free flap reconstruction: A single center study.

BACKGROUND: Postoperative pulmonary complications (PPCs) increase the risk of morbidity and mortality in patients who underwent oral cancer surgery with free flap reconstruction. The association between PPC and preoperative risk factors has been investigated; however, reports on intraoperative factors are limited. Therefore, we investigated PPC incidence and its associated preoperative and intraoperative risk factors in these patients. METHODS: We retrospectively analyzed medical records of patients who underwent free flap reconstruction between 2009 and 2019. PPC was defined as presence of atelectasis, pneumonia, and respiratory failure based on radiological confirmation and clinical symptoms during hospitalization. Mortality, hospital stay, preoperative factors (including age and tumor stages), American Society of Anesthesiologists (ASA) classification, and intraoperative factors (including intraoperative fluids and medications) were recorded. RESULTS: PPC incidence among the 993 patients included in this study was 25.8% (256 patients). Six patients with PPCs died; death was not observed among patients without PPCs (p < 0.001). Patients with PPCs had longer hospitalization than those without PPCs (30.3 vs 23.3 days; p < 0.001). Tumor stage (stage I: reference; stage II [OR]: 3.3, p = 0.019; stage III: 4.4, p = 0.002; stage IV: 4.8, p = 0.002), age (OR: 1.0; p < 0.001), and ASA grade >2 (OR: 1.4; p = 0.020) were independent risk factors of PPC; using labetalol was a borderline significant factor (OR: 1.4; p = 0.050). CONCLUSION: The PPC incidence was 25.8% in patients undergoing oral cancer surgery with free flap reconstruction. Tumor stage, age, and ASA >2 were risk factors of developing PPC.

Tissue Inhibitor of Metalloproteinase 3: Unravelling Its Biological Function and Significance in Oncology.

Tissue inhibitor of metalloproteinases-3 (TIMP3) is vital in regulating several biological processes. TIMP3 exerts antitumour effects via matrix metalloproteinase (MMP)-dependent and MMP-independent pathways. Due to promoter methylation and miRNA binding, TIMP3 expression has been observed to decrease in various cancers. Consequently, the migration and invasion of cancer cells increases. Conflicting results have reported that expression levels of TIMP3 in primary and advanced cancers are higher than those in healthy tissues. Therefore, the role of TIMP3 in cancer biology and progression needs to be elucidated. This review provides an overview of TIMP3, from its biological function to its effects on various cancers. Moreover, gynaecological cancers are discussed in detail. TIMP3 has been associated with cervical adenocarcinoma as well as cancer development in serous ovarian cancer and breast cancer metastasis. However, the relationship between TIMP3 and endometrial cancers remains unclear. TIMP3 may be a useful biomarker for gynaecological cancers and is a potential target for future cancer therapy.

Multimodal feature fusion in deep learning for comprehensive dental condition classification.

BACKGROUND: Dental health issues are on the rise, necessitating prompt and precise diagnosis. Automated dental condition classification can support this need. OBJECTIVE: The study aims to evaluate the effectiveness of deep learning methods and multimodal feature fusion techniques in advancing the field of automated dental condition classification. METHODS AND MATERIALS: A dataset of 11,653 clinically sourced images representing six prevalent dental conditions-caries, calculus, gingivitis, tooth discoloration, ulcers, and hypodontia-was utilized. Features were extracted using five Convolutional Neural Network (CNN) models, then fused into a matrix. Classification models were constructed using Support Vector Machines (SVM) and Naive Bayes classifiers. Evaluation metrics included accuracy, recall rate, precision, and Kappa index. RESULTS: The SVM classifier integrated with feature fusion demonstrated superior performance with a Kappa index of 0.909 and accuracy of 0.925. This significantly surpassed individual CNN models such as EfficientNetB0, which achieved a Kappa of 0.814 and accuracy of 0.847. CONCLUSIONS: The amalgamation of feature fusion with advanced machine learning algorithms can significantly bolster the precision and robustness of dental condition classification systems. Such a method presents a valuable tool for dental professionals, facilitating enhanced diagnostic accuracy and subsequently improved patient outcomes.

Comparing Mn-based oxides filters started by KMnO4 versus K2FeO4 for ammonium and manganese removal: Formation mechanism of active species.

A pilot-scale filtration system was adopted to prepare filter media with catalytic activity to remove manganese (Mn2+) and ammonium (NH4+-N). Three different combinations of oxidants (KMnO4 and K2FeO4) and reductants (MnSO4 and FeCl2) were used during the start-up period. Filter R3 started up by KMnO4 and FeCl2 (Mn7+→MnOx) exhibited excellent catalytic property, and the NH4+-N and Mn2+ removal efficiency reached over 80% on the 10th and 35th days, respectively. Filter R1 started up by K2FeO4 and MnSO4 (MnOx←Mn2+) exhibited the worst catalytic property. Filter R2 started up by KMnO4 and MnSO4 (Mn7+→MnOx←Mn2+) were in between. According to Zeta potential results, the Mn-based oxides (MnOx) formed by Mn7+→MnOx performed the highest pHIEP and pHPZC. The higher the pHIEP and pHPZC, the more unfavorable the cation adsorption. However, it was inconsistent with its excellent Mn2+ and NH4+-N removal abilities, implying that catalytic oxidation played a key role. Combined with XRD and XPS analysis, the results showed that the MnOx produced by the reduction of KMnO4 showed early formation of buserite crystals, high degree of amorphous, high content of Mn3+ and lattice oxygen with the higher activity to form defects. The above results showed that MnOx produced by the reduction of KMnO4 was more conducive to the formation of active species for catalytic oxidation of NH4+-N and Mn2+ removal. This study provides new insights on the formation mechanisms of the active MnOx that could catalytic oxidation of NH4+-N and Mn2+.

Continuous Preparation of Semiconducting Polymer Nanoparticles with Varied Sizes for Online Fluorescence Sensing via a Laser-Tailored 3D Microfluidic Chip.

Microfluidic chips are in critical demand for emerging applications in material synthesis and biosensing. Herein, we relied on ultrafast laser-processing technology to fabricate a three-dimensional (3D) microfluidic chip, in which semiconducting polymer nanoparticles (SPNs) were continuously synthesized with tunable size and SPN-involved online fluorescence sensing was implemented. A homogeneous distribution of SPNs can be readily realized due to the efficient mixing and powerful vortices of the 3D microfluidic chip, which prevents SPNs from aggregating throughout the synthesis process. Moreover, in the optimized conditions, we unveiled unique SPNs with an ultrasmall particle size (<3 nm) and good monodispersity. By integrating with the high-performance fluorescence of SPNs and 3D microfluidic chip, we further developed an online sensing platform for ratiometric fluorescence assays of H2O2 and oxidase-catalyzed substrates (e.g., glucose), in which a composite of SPNs and neutral red (NR) (SPNs/NR) was used as the mediator. The limit of detection (LOD) for H2O2 is 0.48 µM, and the LOD for glucose is 3.33 µM via the presented platform. This 3D microfluidic synthesis-and-sensing platform provides a new avenue for the facile production of nanoparticles and offers exciting prospects in the field of online sensing biomarkers.

Ablation depth enhancement on a copper surface using a dual-color double-pulse femtosecond laser.

We investigate the femtosecond laser ablation of copper with a dual-color double-pulse femtosecond laser at the wavelengths of 515 nm and 1030 nm. By properly choosing the energy of the 515 nm pulse, the optical properties such as surface reflectivity and absorption coefficient on copper surface can be modified to increase the absorption of the subsequent 1030 nm pulse. The ablation depth of dual-color double-pulse laser is at least 50% higher than the total ablation depth of both the 515 nm and 1030 nm pulses, provided that the inter-pulse delay of the double-pulse laser is within the electron-phonon coupling time. The ablation depth enhancement on a copper surface using a dual-color double-pulse femtosecond laser is of significant interest for scientific research and industrial application.

Ultra-high Q lithium niobate microring monolithically fabricated by photolithography assisted chemo-mechanical etching.

As one of the element photonic structures, the state-of-the-art thin-film lithium niobate (TFLN) microrings reach an intrinsic quality (Q) factor higher than 107. However, it is difficult to maintain such high-Q factors when monolithically integrated with bus waveguides. Here, a relatively narrow gap of an ultra-high Q monolithically integrated microring is achieved with 3.8 µm, and a high temperature annealing is carried out to improve the loaded (intrinsic) Q factor with 4.29 × 106 (4.04 × 107), leading to an ultra-low propagation loss of less than 1 dB/m, which is approximately 3 times better than the best values previously reported in ion-slicing TFLN platform.