Amphiphilic Pentablock Copolymers Prepared from Pluronic and ε-Caprolactone by Enzymatic Ring Opening Polymerization.

Amphiphilic copolymers are appealing materials because of their interesting architecture and tunable properties. In view of their application in the biomedical field, the preparation of these materials should avoid the use of toxic compounds as catalysts. Therefore, enzymatic catalysis is a suitable alternative to common synthetic routes. Pentablock copolymers (CUC) were synthesized with high yields by ring-opening polymerization of ε-caprolactone (ε-CL) initiated by Pluronic (EPE) and catalyzed by Candida antarctica lipase B enzyme. The variables to study the structure-property relationship were EPEs' molecular weight and molar ratios between ε-CL monomer and EPE macro-initiator (M/In). The obtained copolymers were chemically characterized, the molecular weight determined, and morphologies evaluated. The results suggest an interaction between the reaction time and M/In variables. There was a correlation between the differential scanning calorimetry data with those of X-ray diffraction (WAXD). The length of the central block of CUC copolymers may have an important role in the crystal formation. WAXD analyses indicated that a micro-phase separation takes place in all the prepared copolymers. Preliminary cytotoxicity experiments on the extracts of the polymer confirmed that these materials are nontoxic.

Extraction of short-chain-length poly-[(R)-hydroxyalkanoates] (scl-PHA) by the "anti-solvent" acetone under elevated temperature and pressure.

A novel method was developed for extraction of short-chain-length poly(hydroxyalkanoates) (scl-PHA) from microbial biomass by the well-known "scl-PHA anti-solvent" acetone at elevated temperature and pressure in a closed system combining components for extraction, filtration, and product work-up. Recovery of scl-PHA using this new approach was compared with established methods using chloroform at ambient pressure. The new method performs similar regarding product purity (98.4 vs. 97.7%) and extraction yield (96.8% by both methods), and is by far faster than established chloroform extraction (20 min vs. 12 h). Separation of the polymer from acetone is simply achieved by cooling down the acetone solution of scl-PHA, thus allows for a nearly quantitative recovery of the solvent that conveniently can be reused. Characterization of scl-PHA extracted by both methods does not reveal any significant difference in terms of molar mass and thermo analytical parameters.

Cationic polymers and their therapeutic potential.

The last decade has witnessed enormous research focused on cationic polymers. Cationic polymers are the subject of intense research as non-viral gene delivery systems, due to their flexible properties, facile synthesis, robustness and proven gene delivery efficiency. Here, we review the most recent scientific advances in cationic polymers and their derivatives not only for gene delivery purposes but also for various alternative therapeutic applications. An overview of the synthesis and preparation of cationic polymers is provided along with their inherent bioactive and intrinsic therapeutic potential. In addition, cationic polymer based biomedical materials are covered. Major progress in the fields of drug and gene delivery as well as tissue engineering applications is summarized in the present review.

Identification of selective ligands for human fibrin recognition using high-throughput docking.

The ultimate aim of this study is to identify new molecules that are able to recognize polymerized fibrin, which is the main component of a thrombus. These selective ligands can be exposed on the surface of particular nanoparticles used for the targeted delivery of fibrinolytic drugs. The targeted delivery of these drugs is expected to help to keep under control the severe side effects which can occur if the drugs are administered systemically. The study focuses on the application of high-throughput docking methods used to screen a library of thousands of commercial compounds. The aim was to identify molecules that are potentially capable of interacting with the human fibrin γ(312-324) epitope. The best scoring compounds were purchased and tested through fluorimetric assays in order to estimate their affinity toward fibrin. The results show that the protocol proposed here for identifying new compounds of interest may provide a valuable contribution to the discovery of lead molecules for human fibrin recognition.

Continuous production of poly([R]-3-hydroxybutyrate) by Cupriavidus necator in a multistage bioreactor cascade.

Poly(hydroxyalkanoates) (PHAs) constitute biodegradable polyesters and are considered among the most promising candidates to replace common petrochemical plastics in various applications. To date, all commercial processes for PHA production employ microbial discontinuous fed-batch fermentations. These processes feature drawbacks such as varying product quality and the inevitable periods of downtime for preparation and post-treatment of the bioreactor equipment. An unprecedented approach to PHA production was chosen in the presented work using a multistage system consisting of five continuous stirred tank reactors in series (5-SCR), which can be considered as a process engineering substitute of a continuous tubular plug flow reactor. The first stage of the reactor cascade is the site of balanced bacterial growth; thereafter, the fermentation broth is continuously fed from the first into the subsequent reactors, where PHA accumulation takes place under nitrogen-limiting conditions. Cupriavidus necator was used as production strain. The focus of the experimental work was devoted to the development of a PHA production process characterized by high productivity and high intracellular polymer content. The results of the experimental work with the reactor cascade demonstrated its potential in terms of volumetric and specific productivity (1.85 g L⁻¹ h⁻¹ and 0.100 g g⁻¹ h⁻¹, respectively), polymer content (77%, w/w) and polymer properties (M (w) = 665 kg/mol, PDI = 2.6). Thus, implementing the technology for 5-SCR production of PHB results in an economically viable process. The study compares the outcome of the work with literature data from continuous two-stage PHA production and industrial PHA production in fed-batch mode.

The surface-segregated nanostructure of fluorinated copolymer-poly(dimethylsiloxane) blend films.

Two fluorinated/siloxane copolymers, O5/19 and D5/3, carrying 6 and 8 CF(2) groups in the fluoroalkyl tail, respectively, were used as the surface-active components of cured poly(dimethylsiloxane) (PDMS) blends at different loadings (0.3-5.0 wt % with respect to PDMS). The surface chemical composition was determined by angle-resolved X-ray photoelectron spectroscopy at the takeoff angles theta of 0 degrees, 60 degrees, and 75 degrees. It was found that the fluorinated copolymer was surface-segregated, and in-depth segregation (approximately 5 nm) depended upon the chemical structure of the copolymer. The surface fluorine atomic percentage of the blends with D5/3 was up to 3 orders of magnitude higher than the theoretical value expected for ideal homogeneous samples. Moreover, small amounts of the copolymer in the blends were sufficient to saturate the outermost surface in fluorine content. The chemical composition of the surface-segregated nanostructure of the films was also proven to be affected by external environment, namely, exposure to water.

More fluorous surface modifier makes it less oleophobic: fluorinated siloxane copolymer/PDMS coatings.

A copolyacrylate with semifluorinated and polydimethylsiloxane side chains (D5-3) was used as a surface modifier for a condensation-cured PDMS coating. The decyl fluorous group is represented by "D"; "5" is a 5 kDa silicone, and "3" is the mole ratio of fluorous to silicone side chains. Wetting behavior was assessed by dynamic contact angle (DCA) analysis using isopropanol, which differentiates silicone and fluorous wetting behavior. Interestingly, a maximum in surface oleophobicity was found at low D5-3 concentration (0.4 wt %). Higher concentrations result in decreased oleophobicity, as reflected in decreased contact angles. To understand this unexpected observation, dynamic light scattering (DLS) studies were initiated on a model system consisting of hydroxyl-terminated PDMS (18 kDa) containing varying amounts of D5-3. DLS revealed D5-3 aggregation to be a function of temperature and concentration. A model is proposed by which D5-3 surface concentration is depleted via phase separation favoring D5-3 aggregation at concentrations >0.4 wt %, that is, the cmc. This model suggests increasing aggregate/micelle concentrations at increased D5-3 concentration. Bulk morphologies studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM) support this model by showing increased aggregate concentrations with increased D5-3 > 0.4 wt %.

Three-dimensional models of the oligomeric human asialoglycoprotein receptor (ASGP-R).

The work presented here is aimed at suggesting plausible hypotheses for functional oligomeric forms of the human asialoglycoprotein receptor (ASGP-R), by applying a combination of different computational techniques. The functional ASGP-R is a hetero-oligomer, that comprises of several subunits of two different kinds (H1 and H2), which are highly homologous. Its stoichiometry is still unknown. An articulated step-wise modeling protocol was used in order to build the receptor model in a minimal oligomeric form, necessary for it to bind multi-antennary carbohydrate ligands. The ultimate target of the study is to contribute to increasing the knowledge of interactions between the human ASGP-R and carbohydrate ligands, at the molecular level, pertinent to applications in the field of hepatic tissue engineering.

Polymeric nanoparticles for hemoglobin-based oxygen carriers.

This article reports on the current status of the research on blood substitutes with particular attention on hemoglobin-based oxygen carriers (HBOCs). Insights on the physiological role of hemoglobin are reported in the view of the development of both acellular and cellular hemoglobin-based oxygen carriers. Attention is then focused on biocompatible polymeric materials that find application as matrices for cellular based HBOCs and on the strategies employed to avoid methemoglobin formation. Results are reported regarding the use of bioerodible polymeric matrices based on hemiesters of alternating copolymer (maleic anhydride-co-butyl vinyl ether) for the preparation of hemoglobin loaded nanoparticles.

Poly(hydroxyalkanoates)-based polymeric nanoparticles for drug delivery.

Poly (hydroxyalkanoates) (PHAs) have recently attracted a great deal of academic and industrial interest for their biodegradability and biocompatibility making them suitable for environmental and biomedical applications. Poly(3-hydroxybutyrate-) (PHB-) and Poly(DL-lactide-co-glycolide) (PLGA-) based nanoparticles were prepared using the dialysis method as yet unreported for the preparation of nanoparticles based on PHB. Processing conditions were varied in order to evaluate their influence on morphology, drug encapsulation, and size of nanoparticles. The relevant results obtained give a theoretical understanding of the phenomenon occurring during colloidal formation. The adopted procedure allows for a relatively small diameter and homogeneity in size distribution of the PHB nanoparticles to be obtained compared to other methods like the one based on solvent evaporation which leads to particles on microscale. The biocompatibility of PHB and relative nanoparticles was investigated and both exhibited very good cytocompatibility.

Fluorinated/siloxane copolymer blends for fouling release: chemical characterisation and biological evaluation with algae and barnacles.

Fouling-release coatings were prepared from blends of a fluorinated/siloxane copolymer with a poly(dimethyl siloxane) (PDMS) matrix in order to couple the low modulus character of PDMS with the low surface tension typical for fluorinated polymers. The content of the surface-active copolymer was varied in the blend over a broad range (0.15-10 wt % with respect to PDMS). X-ray photoelectron spectroscopy depth profiling analyses were performed on the coatings to establish the distribution of specific chemical constituents throughout the coatings, and proved enrichment in fluorine of the outermost layers of the coating surface. Addition of the fluorinated/siloxane copolymer to the PDMS matrix resulted in a concentration-dependent decrease in settlement of barnacle, Balanus amphitrite, cyprids. The release of young plants of Ulva, a soft fouling species, and young barnacles showed that adhesion strength on the fluorinated/siloxane copolymer was significantly lower than the siloxane control. However, differences in adhesion strength were not directly correlated with the concentration of copolymer in the blends.

Mass Spectrometry Reveals Molecular Structure of Polyhydroxyalkanoates Attained by Bioconversion of Oxidized Polypropylene Waste Fragments.

This study investigated the molecular structure of the polyhydroxyalkanoate (PHA) produced via a microbiological shake flask experiment utilizing oxidized polypropylene (PP) waste as an additional carbon source. The bacterial strain Cupriavidus necator H16 was selected as it is non-pathogenic, genetically stable, robust, and one of the best known producers of PHA. Making use of PHA oligomers, formed by controlled moderate-temperature degradation induced by carboxylate moieties, by examination of both the parent and fragmentation ions, the ESI-MS/MS analysis revealed the 3-hydroxybutyrate and randomly distributed 3-hydroxyvalerate as well as 3-hydroxyhexanoate repeat units. Thus, the bioconversion of PP solid waste to a value-added product such as PHA tert-polymer was demonstrated.

Biodegradable thermoplastic composites based on polyvinyl alcohol and algae.

Algae constitute a largely available, low value material from renewable resources of marine origin to be used for the production of eco-compatible composites. Fibers of the green alga Ulva armoricana from the French coast were positively evaluated for the production of composites with a hydrophilic, eco-compatible polymer, such as poly(vinyl alcohol) (PVA) as continuous matrix by casting of aqueous suspensions and compression molding. PVA, Ulva, and starch were also successfully processed by the melt in the presence of glycerol. Positive results were obtained for film-forming properties and mechanical characteristics also with limited amounts of PVA (40%) attesting for Ulva suitability to be introduced in composites (up to 30%). Degradation in soil of Ulva and an Ulva-based composites outlined a rapid mineralization of Ulva in the selected medium (over 80% in 100 days) while the composite samples underwent a mineralization rate affected by the different component propensity to degradation.

A new biocompatible nanoparticle delivery system for the release of fibrinolytic drugs.

The preparation of novel biocompatible polymeric nanoconstructs suitable to load sensitive bioactive protein agents is reported. Nanoparticles were prepared as based on hybrid polymeric matrices consisting of synthetic bioerodible alternating copolymers of maleic anhydride and n-butylvinylether hemiesterified with 2-methoxyethanol and grafted with poly(ethylene glycol) segments and monoclonal antibody single chain fragment specific for fibrin clot. The prepared nanoparticles were loaded with proteolytic enzymes (trypsin and urokinase), encapsulating up to 2500UI of urokinase/mg of dried nanoparticles. The release of the enzyme from nanoparticles resulted time controlled and it was assessed that in case of administration of urokinase-loaded nanoparticles, the enzyme would preserve its thrombolytic properties more efficiently in respect to free drug administration. Moreover, the nanoparticles showed a good in vitro biocompatibility, suitable for biomedical applications. The stability (shelf life) of the prepared nanostructured dosage forms was evaluated. The drug-loaded nanoparticles resulted stable under stressed conditions (35 degrees C for 13 weeks) in a lyophilized form and preserved their morphological and functional characteristics when stored in suspension for 18 months at 4 degrees C.

Polyhydroxyalkanoate production from whey by Pseudomonas hydrogenovora.

Whey permeate from dairy industry was hydrolyzed enzymatically to cleave its main carbon source, lactose, to glucose and galactose. The hydrolysis products were chosen as carbon sources for the production of poly-3-hydroxybutyric acid (PHB) by Pseudomonas hydrogenovora. In shaking flask experiments, the utilization of whey permeate as a cheap substrate was compared to the utilization of pure glucose and galactose for bacterial growth under balanced conditions as well as for the production of PHB under nitrogen limitation. After determination of the inhibition constant Ki for sodium valerate on biomass production (Ki=1.84 g/l), the biosynthesis of PHA co-polyesters containing 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) units from hydrolyzed whey permeate and valerate was investigated. The application of hydrolyzed whey permeate turned out to be advantageous compared with the utilization of pure sugars. Therefore, fermentation under controlled conditions in a bioreactor was performed with hydrolyzed whey permeate to obtain detailed kinetic data (maximum specific growth rate, mu max=0.291/h, maximum polymer concentration, 1.27 g/l PHB), values for molecular mass distribution (weight average molecular weight Mw=353.5 kDa, polydispersity index PDI=3.8) and thermo analytical data. The fermentation was repeated with co-feeding of valerate (maximum specific growth rate, mu(max)=0.201/h, maximum polymer concentration, 1.44 g/l poly-(3HB-co-21%-3HV), weight average molecular weight M(w)=299.2 kDa, polydispersity index PDI=4.3).

The Microbial Production of Polyhydroxyalkanoates from Waste Polystyrene Fragments Attained Using Oxidative Degradation.

Excessive levels of plastic waste in our oceans and landfills indicate that there is an abundance of potential carbon sources with huge economic value being neglected. These waste plastics, through biological fermentation, could offer alternatives to traditional petrol-based plastics. Polyhydroxyalkanoates (PHAs) are a group of plastics produced by some strains of bacteria that could be part of a new generation of polyester materials that are biodegradable, biocompatible, and, most importantly, non-toxic if discarded. This study introduces the use of prodegraded high impact and general polystyrene (PS0). Polystyrene is commonly used in disposable cutlery, CD cases, trays, and packaging. Despite these applications, some forms of polystyrene PS remain financially and environmentally expensive to send to landfills. The prodegraded PS0 waste plastics used were broken down at varied high temperatures while exposed to ozone. These variables produced PS flakes (PS1⁻3) and a powder (PS4) with individual acid numbers. Consequently, after fermentation, different PHAs and amounts of biomass were produced. The bacterial strain, Cupriavidus necator H16, was selected for this study due to its well-documented genetic profile, stability, robustness, and ability to produce PHAs at relatively low temperatures. The accumulation of PHAs varied from 39% for prodegraded PS0 in nitrogen rich media to 48% (w/w) of dry biomass with the treated PS. The polymers extracted from biomass were analyzed using nuclear magnetic resonance (NMR) and electrospray ionization tandem mass spectrometry (ESI-MS/MS) to assess their molecular structure and properties. In conclusion, the PS0⁻3 specimens were shown to be the most promising carbon sources for PHA biosynthesis; with 3-hydroxybutyrate and up to 12 mol % of 3-hydroxyvalerate and 3-hydroxyhexanoate co-monomeric units generated.

Additive manufacturing of poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] scaffolds for engineered bone development.

A wide range of poly(hydroxyalkanoate)s (PHAs), a class of biodegradable polyesters produced by various bacteria grown under unbalanced conditions, have been proposed for the fabrication of tissue-engineering scaffolds. In this study, the manufacture of poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] (or PHBHHx) scaffolds, by means of an additive manufacturing technique based on a computer-controlled wet-spinning system, was investigated. By optimizing the processing parameters, three-dimensional scaffolds with different internal architectures were fabricated, based on a layer-by-layer approach. The resulting scaffolds were characterized by scanning electron microscopy, which showed good control over the fibre alignment and a fully interconnected porous network, with porosity in the range 79-88%, fibre diameter 47-76 µm and pore size 123-789 µm. Moreover, the resulting fibres presented an internal porosity connected to the external fibre surface as a consequence of the phase-inversion process governing the solidification of the polymer solution. Scaffold compressive modulus and yield stress and strain could be varied in a certain range by changing the architectural parameters. Cell-culture experiments employing the MC3T3-E1 murine pre-osteoblast cell line showed good cell proliferation after 21 days of culture. The PHBHHx scaffolds demonstrated promising results in terms of cell differentiation towards an osteoblast phenotype. Copyright © 2014 John Wiley & Sons, Ltd.

Additive manufacturing techniques for the production of tissue engineering constructs.

'Additive manufacturing' (AM) refers to a class of manufacturing processes based on the building of a solid object from three-dimensional (3D) model data by joining materials, usually layer upon layer. Among the vast array of techniques developed for the production of tissue-engineering (TE) scaffolds, AM techniques are gaining great interest for their suitability in achieving complex shapes and microstructures with a high degree of automation, good accuracy and reproducibility. In addition, the possibility of rapidly producing tissue-engineered constructs meeting patient's specific requirements, in terms of tissue defect size and geometry as well as autologous biological features, makes them a powerful way of enhancing clinical routine procedures. This paper gives an extensive overview of different AM techniques classes (i.e. stereolithography, selective laser sintering, 3D printing, melt-extrusion-based techniques, solution/slurry extrusion-based techniques, and tissue and organ printing) employed for the development of tissue-engineered constructs made of different materials (i.e. polymeric, ceramic and composite, alone or in combination with bioactive agents), by highlighting their principles and technological solutions.

Environmentally degradable bio-based polymeric blends and composites.

Blends and composites based on environmentally degradable-ecocompatible synthetic and natural polymeric materials and fillers of natural origin have been prepared and processed under different conditions. Poly(vinyl alcohol) (PVA) was used as the synthetic polymer of choice by virtue of its capability to be processed from water solution or suspension as well as from the melt by blow extrusion and injection molding. Starch and gelatin were taken as the polymeric materials from renewable resources. The fillers were all of natural origin, as waste from food and agro-industry consisted of sugar cane bagasse (SCB), wheat flour (WF), orange peels (OR), apple peels (AP), corn fibres (CF), saw dust (SD) and wheat straw (WS). All the natural or hybrid formulations were intended to be utilized for the production of: a) Environmentally degradable mulching films (hydro-biomulching) displaying, in some cases, self-fertilizing characteristics by in situ spraying of water solutions or suspensions; b) Laminates and containers to be used in agriculture and food packaging by compression and injection molding followed by baking. Some typical prototype items have been prepared and characterized in relation to their morphological and mechanical properties and tested with different methodology for their propensity to environmental degradation and biodegradation as ultimate stage of their service life. A relationship between chemical composition and mechanical properties and propensity to biodegradation has been discussed in a few representative cases.

Characterization of surface NH3+Cl- groups on poly(styrene-co-Boc-aminostyrene) microspheres obtained by controlled acidic treatment.

Different samples of aminated latex of poly(styrene-co-Boc-aminostyrene) microspheres with mean diameters varying from 0.7 to 1.0 microm were prepared by dispersion copolymerization of styrene (ST) and Boc-aminostyrene (Boc-AMST). The copolymer compositions determined by nuclear magnetic resonance (1H NMR) were Boc-AMST/ST 6.9/93.1 mol/mol % (BOC7 sample) and Boc-AMST/ST 31.3/68.7 mol/mol % (BOC30 sample). The average molecular weights determined by gel permeation chromatography were 126 kDa (BOC7 sample) and 51 kDa (BOC30 sample). The latex containing NH-carbo-tert-butoxy groups (NH-Boc) were treated with 2 M HCl in isopropyl alcohol/water (1:1 vol/vol), at 50 degrees C for 3, 6, 9, 24, and 30 h, in order to control the extent of deprotection reaction of the NH-Boc. The deprotection reaction resulted in the formation of NH3+Cl- groups on the particle surfaces. The kinetic of the deprotection reaction was investigated by 1H NMR analyses and the yield varied from 20 to 40%. The resulting -NH3+Cl- groups on the microsphere surfaces were examined, in particular, by electron spectroscopy imaging (ESI) using an energy-filtered transmission electron microscope (EFTEM) that clearly demonstrated the presence of Cl on the particle surfaces. Scanning electron photomicrographs recorded for the above samples showed that the particle morphology was maintained after the acidic treatment.