Observation of the orbital Hall effect in a light metal Ti.

The orbital Hall effect1 refers to the generation of electron orbital angular momentum flow transverse to an external electric field. Contrary to the common belief that the orbital angular momentum is quenched in solids, theoretical studies2,3 predict that the orbital Hall effect can be strong and is a fundamental origin of the spin Hall effect4-7 in many transition metals. Despite the growing circumstantial evidence8-11, its direct detection remains elusive. Here we report the magneto-optical observation of the orbital Hall effect in the light metal titanium (Ti). The Kerr rotation by the orbital magnetic moment accumulated at Ti surfaces owing to the orbital Hall current is measured, and the result agrees with theoretical calculations semi-quantitatively and is supported by the orbital torque12 measurement in Ti-based magnetic heterostructures. This result confirms the orbital Hall effect and indicates that the orbital angular momentum is an important dynamic degree of freedom in solids. Moreover, this calls for renewed studies of the orbital effect on other degrees of freedom such as spin2,3,13,14, valley15,16, phonon17-19 and magnon20,21 dynamics.

Pseudo-Hydrodynamic Flow of Quasiparticles in Semimetal WTe2 at Room Temperature.

Recently, much interest has emerged in fluid-like electric charge transport in various solid-state systems. The hydrodynamic behavior of the electronic fluid reveals itself as a decrease of the electrical resistance with increasing temperature (the Gurzhi effect) in narrow channels, polynomial scaling of the resistance as a function of the channel width, violation of the Wiedemann-Franz law supported by the emergence of the Poiseuille flow. Similar to whirlpools in flowing water, the viscous electronic flow generates vortices, resulting in abnormal sign-changing electrical response driven by backflow. However, the question of whether the long-ranged sign-changing electrical response can be produced by a mechanism other than hydrodynamics has not been addressed so far. Here polarization-sensitive laser microscopy is used to demonstrate the emergence of visually similar abnormal sign-alternating patterns in semi-metallic tungsten ditelluride at room temperature where this material does not exhibit true hydrodynamics. It is found that the neutral quasiparticle current consisting of electrons and holes obeys an equation remarkably similar to the Navier-Stokes equation. In particular, the momentum relaxation is replaced by the much slower process of quasiparticle recombination. This pseudo-hydrodynamic flow of quasiparticles leads to a sign-changing charge accumulation pattern via different diffusivities of electrons and holes.

Picosecond Spin Seebeck Effect.

We report time-resolved magneto-optic Kerr effect measurements of the longitudinal spin Seebeck effect in normal metal/Y_{3}Fe_{5}O_{12} bilayers driven by an interfacial temperature difference between electrons and magnons. The measured time evolution of spin accumulation induced by laser excitation indicates transfer of angular momentum across normal metal/Y_{3}Fe_{5}O_{12} interfaces on a picosecond time scale, too short for contributions from a bulk temperature gradient in an yttrium iron garnet. The product of spin-mixing conductance and the interfacial spin Seebeck coefficient determined is of the order of 10^{8} A m^{-2} K^{-1}.

Fabrication of nano-sized magnetic tunnel junctions using lift-off process assisted by atomic force probe tip.

We present a fabrication method for nano-scale magnetic tunnel junctions (MTJs), employing e-beam lithography and lift-off process assisted by the probe tip of atomic force microscope (AFM). It is challenging to fabricate nano-sized MTJs on small substrates because it is difficult to use chemical mechanical planarization (CMP) process. The AFM-assisted lift-off process enables us to fabricate nano-sized MTJs on small substrates (12.5 mm x 12.5 mm) without CMP process. The e-beam patterning has been done using bi-layer resist, the poly methyl methacrylate (PMMA)/ hydrogen silsesquioxane (HSQ). The PMMA/HSQ resist patterns are used for both the etch mask for ion milling and the self-aligned mask for top contact formation after passivation. The self-aligned mask buried inside a passivation oxide layer, is readily lifted-off by the force exerted by the probe tip. The nano-MTJs (160 nm x 90 nm) fabricated by this method show clear current-induced magnetization switching with a reasonable TMR and critical switching current density.

Giant Spin-Orbit Torque in Sputter-Deposited Bi Films.

Bismuth (Bi) has the strongest spin-orbit coupling among non-radioactive elements and is thus a promising material for efficient charge-to-spin conversion. However, previous electrical detections have reported controversial results for the conversion efficiency. In this study, an optical detection of a spin-orbit torque is reported in a Bi/CoFeB bilayer with a polycrystalline texture of (012) and (003). Taking advantage of the optical detection, spin-orbit torque is accurately separated from the Oersted field and achieves a giant damping-like torque efficiency of +0.5, verifying efficient charge-to-spin conversion. This study also demonstrates a field-like torque efficiency of -0.1. For the mechanism of the charge-to-spin conversion, the bulk spin Hall effect and the interface Rashba-Edelstein effect are considered.

Spin current driven by ultrafast magnetization of FeRh.

Laser-induced ultrafast demagnetization is an important phenomenon that probes arguably the ultimate limits of the angular momentum dynamics in solid. Unfortunately, many aspects of the dynamics remain unclear except that the demagnetization transfers the angular momentum eventually to the lattice. In particular, the role and origin of electron-carried spin currents in the demagnetization process are debated. Here we experimentally probe the spin current in the opposite phenomenon, i.e., laser-induced ultrafast magnetization of FeRh, where the laser pump pulse initiates the angular momentum build-up rather than its dissipation. Using the time-resolved magneto-optical Kerr effect, we directly measure the ultrafast-magnetization-driven spin current in a FeRh/Cu heterostructure. A strong correlation between the spin current and the magnetization dynamics of FeRh is found even though the spin filter effect is negligible in this opposite process. This result implies that the angular momentum build-up is achieved by an angular momentum transfer from the electron bath (supplier) to the magnon bath (receiver) and followed by the spatial transport of angular momentum (spin current) and dissipation of angular momentum to the phonon bath (spin relaxation).

Engineering electrode interfaces for telecom-band photodetection in MoS2/Au heterostructures via sub-band light absorption.

Transition metal dichalcogenide (TMD) layered semiconductors possess immense potential in the design of photonic, electronic, optoelectronic, and sensor devices. However, the sub-bandgap light absorption of TMD in the range from near-infrared (NIR) to short-wavelength infrared (SWIR) is insufficient for applications beyond the bandgap limit. Herein, we report that the sub-bandgap photoresponse of MoS2/Au heterostructures can be robustly modulated by the electrode fabrication method employed. We observed up to 60% sub-bandgap absorption in the MoS2/Au heterostructure, which includes the hybridized interface, where the Au layer was applied via sputter deposition. The greatly enhanced absorption of sub-bandgap light is due to the planar cavity formed by MoS2 and Au; as such, the absorption spectrum can be tuned by altering the thickness of the MoS2 layer. Photocurrent in the SWIR wavelength range increases due to increased absorption, which means that broad wavelength detection from visible toward SWIR is possible. We also achieved rapid photoresponse (~150 µs) and high responsivity (17 mA W-1) at an excitation wavelength of 1550 nm. Our findings demonstrate a facile method for optical property modulation using metal electrode engineering and for realizing SWIR photodetection in wide-bandgap 2D materials.

Electron-Phonon Coupling Parameter of Ferromagnetic Metal Fe and Co.

The electron-phonon coupling (g) parameter plays a critical role in the ultrafast transport of heat, charge, and spin in metallic materials. However, the exact determination of the g parameter is challenging because of the complicated process during the non-equilibrium state. In this study, we investigate the g parameters of ferromagnetic 3d transition metal (FM) layers, Fe and Co, using time-domain thermoreflectance. We measure a transient increase in temperature of Au in an FM/Au bilayer; the Au layer efficiently detects the strong heat flow during the non-equilibrium between electrons and phonons in FM. The g parameter of the FM is determined by analyzing the temperature dynamics using thermal circuit modeling. The determined g values are 8.8-9.4 × 1017 W m-3 K-1 for Fe and 9.6-12.2 × 1017 W m-3 K-1 for Co. Our results demonstrate that all 3d transition FMs have a similar g value, in the order of 1018 W m-3 K-1.

Magnetic Anisotropy and Damping Constant of Ferrimagnetic GdCo Alloy near Compensation Point.

Metallic ferrimagnets with rare earth-transition metal alloys can provide novel properties that cannot be obtained using conventional ferromagnets. Recently, the compensation point of ferrimagnets, where the net magnetization or net angular momentum vanishes, has been considered a key aspect for memory device applications. For such applications, the magnetic anisotropy energy and damping constant are crucial. In this study, we investigate the magnetic anisotropy and damping constant of a GdCo alloy, with a Gd concentration of 12-27%. By analyzing the equilibrium tilting of magnetization as a function of the applied magnetic field, we estimate the uniaxial anisotropy to be 1-3 × 104 J m-3. By analyzing the transient dynamics of magnetization as a function of time, we estimate the damping constant to be 0.08-0.22.

Proposing a new solution for marine debris by utilizing on-board low-temperature eco-friendly pulverization system.

Developing an effective and efficient recycling process for marine debris (MD) is one of the most urgent issues to maintain environmental sustainability on Earth. However, restricted storage capacities and secondary pollution (e.g., microbial adhesion, putrefaction) limit the proper MD recycling. Here, we proposed a complete eco-friendly low-temperature MD pulverizing system that utilizes excessive liquefied natural gas (LNG) cold energy (LCE) in an LNG propulsion ship to improve the efficiency and effectiveness of MD recycling. The prototype design of the low-temperature pulverization (LTP) system showed that consumable refrigerant (liquid nitrogen) up to 2831 kg per hour could be substituted. Furthermore, with a 20% ship output, 1250 kg of MD could be treated with 363 kg of additional refrigerant. In addition, LTP systems utilizing LCE could increase the storage capacity by more than 10 times compared to bulk MD while minimizing the required energy consumption. To determine the feasibility of LTP for MD recycling, four types of plastics obtained from actual MD from a coastal area in Busan, Korea were classified and tested.

Optical spin-orbit torque in heavy metal-ferromagnet heterostructures.

Spin current generation through the spin-orbit interaction in non-magnetic materials lies at the heart of spintronics. When the generated spin current is injected to a ferromagnet, it produces spin-orbit torque and manipulates magnetization efficiently. Optically generated spin currents are expected to be superior to their electrical counterparts in terms of the manipulation speed. Here we report optical spin-orbit torques in heavy metal/ferromagnet heterostructures. The strong spin-orbit coupling of heavy metals induces photo-excited carriers to be spin-polarized, and their transport from heavy metals to ferromagnets induces a torque on magnetization. Our results demonstrate that heavy metals can generate spin-orbit torque not only electrically but also optically.

Optical-helicity-driven magnetization dynamics in metallic ferromagnets.

Recent observations of switching of magnetic domains in ferromagnetic metals by circularly polarized light, so-called all-optical helicity dependent switching, has renewed interest in the physics that governs the interactions between the angular momentum of photons and the magnetic order parameter of materials. Here we use time-resolved-vectorial measurements of magnetization dynamics of thin layers of Fe, Ni and Co driven by picosecond duration pulses of circularly polarized light. We decompose the torques that drive the magnetization into field-like and spin-transfer components that we attribute to the inverse Faraday effect and optical spin-transfer torque, respectively. The inverse Faraday effect is approximately the same in Fe, Ni and Co, but the optical spin-transfer torque is strongly enhanced by adding a Pt capping layer. Our work provides quantitative data for testing theories of light-material interactions in metallic ferromagnets and multilayers.

Spin current generated by thermally driven ultrafast demagnetization.

Spin current is the key element for nanoscale spintronic devices. For ultrafast operation of such nano-devices, generation of spin current in picoseconds, a timescale that is difficult to achieve using electrical circuits, is highly desired. Here we show thermally driven ultrafast demagnetization of a perpendicular ferromagnet leads to spin accumulation in a normal metal and spin transfer torque in an in-plane ferromagnet. The data are well described by models of spin generation and transport based on differences and gradients of thermodynamic parameters. The temperature difference between electrons and magnons is the driving force for spin current generation by ultrafast demagnetization. On longer timescales, a few picoseconds following laser excitation, we also observe a small contribution to spin current by a temperature gradient and the spin-dependent Seebeck effect.