Probiotics ameliorate chronic low-grade inflammation and fat accumulation with gut microbiota composition change in diet-induced obese mice models.

Recent reports suggest that obesity is caused by dysbiosis of gut microbiota and that it could be prevented or treated through improvement in the composition and diversity of gut microbiota. In this study, high-fat diet (HFD)-induced obese mice were orally administered with Lactobacillus plantarum K50 (K50) isolated from kimchi and Lactobacillus rhamnosus GG (LGG) as a positive control for 12 weeks. Body weight and weights of epididymal, mesenteric, and subcutaneous adipose tissues and the liver were significantly reduced in K50-treated HFD-fed mice compared with HFD-fed mice. The serum triglyceride level was decreased and high-density lipoprotein cholesterol level was increased in K50-treated HFD-fed mice. The gut microbiota analysis showed that the L. plantarum K50 treatment reduced the Firmicutes/Bacteroidetes ratio and improved the gut microbiota composition. In addition, the level of total short-chain fatty acids (SCFAs) in K50-treated HFD-fed mice was higher than that in HFD-fed mice. A remarkable reduction in the fat content of adipose tissue and liver was also observed in K50-treated HFD-fed mice, accompanied by improvements in gene expression related to lipid metabolism, adipogenesis, and SCFA receptors. K50-treated mice had downregulated expression levels of genes and proteins such as TNFα and IL-1ß. Our findings confirm that L. plantarum K50 could be a good candidate for ameliorating fat accumulation and low-grade inflammation in metabolic tissues through gut microbiota improvement.

KEY POINTS: • Lactobacillus plantarum and L. rhamnosus GG were fed to HFD-induced obese mice.• L. plantarum K50 had dramatic ameliorating effects on obesity and related diseases.• These effects may be associated with the restoration of gut microbiota dysbiosis.

The Limits of Electromechanical Coupling in Highly-Tensile Strained Germanium.

Speculations regarding electronic and photonic properties of strained germanium (Ge) have perpetually put it into contention for next-generation devices since the start of the information age. Here, the electromechanical coupling of <111> Ge nanowires (NWs) is reported from unstrained conditions to the ultimate tensile strength. Under tensile strain, the conductivity of the NW is enhanced exponentially, reaching an enhancement factor of ∼130 at ∼3.5% of strain. Under strains larger than ∼2.5%, the electrical properties of Ge also exhibit a dependence on the electric field. The conductivity can be further enhanced by ∼2.2× with a high bias condition at ∼3.5% of strain. Cyclic loading tests confirm that the observed electromechanical responses are repeatable, reversible, and related to the changing electronic band structure. These tests reveal the excellent prospects for utilizing strained Ge NWs in photodetector or piezoelectronic transistor applications, but significant challenges remain to realize strict direct band gap devices.

Flaw-Containing Alumina Hollow Nanostructures Have Ultrahigh Fracture Strength To Be Incorporated into High-Efficiency GaN Light-Emitting Diodes.

In the present study, we found that α-alumina hollow nanoshell structure can exhibit an ultrahigh fracture strength even though it contains a significant number of nanopores. By systematically performing in situ mechanical testing and finite element simulations, we could measure that the fracture strength of an α-alumina hollow nanoshell structure is about four times higher than that of the conventional bulk size α-alumina. The high fracture strength of the α-alumina hollow nanoshell structure can be explained in terms of conventional fracture mechanics, in that the position and size of the nanopores are the most critical factors determining the fracture strength, even at the nanoscales. More importantly, by deriving a fundamental understanding, we would be able to provide guidelines for the design of reliable ceramic nanostructures for advanced GaN light-emitting diodes (LEDs). To that end, we demonstrated how our ultrastrong α-alumina hollow nanoshell structures could be successfully incorporated into GaN LEDs, thereby greatly improving the luminous efficiency and output power of the LEDs by 2.2 times higher than that of conventional GaN LEDs.

Carbon-Nanosheet Based Large-Area Electrochemical Capacitor that is Flexible, Foldable, Twistable, and Stretchable.

With the growing demand for wearable electronics, developing new compatible energy systems is a prominent topic of research. Energy systems mounted on wearable electronics should exhibit high cost efficiency, mechanical robustness, and high electrochemical activity. Herein, all-carbon-based large-area nanocomposites for freely deformable electrochemical capacitors are suggested to address these requirements. The three-dimensionally integrated, self-supported nanocomposites consist of activated carbons (ACs) distributed in direct spinning-derived carbon nanotube (DS-CNT) sheets without any additives, including conducting agents or binders. Owing to synergetic effects of the highly porous AC particles, high electron transport kinetics of CNTs, and facile ion accessibility resulting from acid treatment, the nanocomposites show a greatly improved specific capacitance of 128 F g-1 , compared to that of pristine ACs (62 F g-1 ), based on the total mass of the electrodes. The exceptional mechanical stability of the nanocomposites, which are attached on prestretched elastomer substrates, is confirmed; only a ≈15% increase in the electrical resistance is observed under a tensile strain of 100%, and the initial resistance is fully recovered after releasing. Finally, the outstanding durability and electrochemical performance of the deformable all-carbon-based symmetric capacitors under various mechanical deformations of bending, folding, twisting, and stretching are successfully demonstrated.

Engineering the shape and structure of materials by fractal cut.

In this paper we discuss the transformation of a sheet of material into a wide range of desired shapes and patterns by introducing a set of simple cuts in a multilevel hierarchy with different motifs. Each choice of hierarchical cut motif and cut level allows the material to expand into a unique structure with a unique set of properties. We can reverse-engineer the desired expanded geometries to find the requisite cut pattern to produce it without changing the physical properties of the initial material. The concept was experimentally realized and applied to create an electrode that expands to >800% the original area with only very minor stretching of the underlying material. The generality of our approach greatly expands the design space for materials so that they can be tuned for diverse applications.

Ultrahigh Tensile Strength Nanowires with a Ni/Ni-Au Multilayer Nanocrystalline Structure.

Superior mechanical properties of nanolayered structures have attracted great interest recently. However, previously fabricated multilayer metallic nanostructures have high strength under compressive load but never reached such high strength under tensile loads. Here, we report that our microalloying-based electrodeposition method creates a strong and stable Ni/Ni-Au multilayer nanocrystalline structure by incorporating Au atoms that makes nickel nanowires (NWs) strongest ever under tensile loads even with diameters exceeding 200 nm. When the layer thickness is reduced to 10 nm, the tensile strength reaches the unprecedentedly high 7.4 GPa, approximately 10 times that of metal NWs with similar diameters, and exceeding that of most metal nanostructures previously reported at any scale.

A half millimeter thick coplanar flexible battery with wireless recharging capability.

Most of the existing flexible lithium ion batteries (LIBs) adopt the conventional cofacial cell configuration where anode, separator, and cathode are sequentially stacked and so have difficulty in the integration with emerging thin LIB applications, such as smart cards and medical patches. In order to overcome this shortcoming, herein, we report a coplanar cell structure in which anodes and cathodes are interdigitatedly positioned on the same plane. The coplanar electrode design brings advantages of enhanced bending tolerance and capability of increasing the cell voltage by in series-connection of multiple single-cells in addition to its suitability for the thickness reduction. On the basis of these structural benefits, we develop a coplanar flexible LIB that delivers 7.4 V with an entire cell thickness below 0.5 mm while preserving stable electrochemical performance throughout 5000 (un)bending cycles (bending radius = 5 mm). Also, even the pouch case serves as barriers between anodes and cathodes to prevent Li dendrite growth and short-circuit formation while saving the thickness. Furthermore, for convenient practical use wireless charging via inductive electromagnetic energy transfer and solar cell integration is demonstrated.

Direct fermentation route for the production of acrylic acid.

There have been growing concerns regarding the limited fossil resources and global climate changes resulting from modern civilization. Currently, finding renewable alternatives to conventional petrochemical processes has become one of the major focus areas of the global chemical industry sector. Since over 4.2 million tons of acrylic acid (AA) is annually employed for the manufacture of various products via petrochemical processes, this chemical has been the target of efforts to replace the petrochemical route by ecofriendly processes. However, there has been limited success in developing an approach combining the biological production of 3-hydroxypropionic acid (3-HP) and its chemical conversion to AA. Here, we report the first direct fermentative route for producing 0.12 g/L of AA from glucose via 3-HP, 3-HP-CoA, and Acryloyl-CoA, leading to a strain of Escherichia coli capable of directly producing acrylic acid. This route was developed through extensive screening of key enzymes and designing a novel metabolic pathway for AA.

Metabolic engineering of 3-hydroxypropionic acid biosynthesis in Escherichia coli.

3-Hydroxypropionic acid (3-HP) can be produced in microorganisms as a versatile platform chemical. However, owing to the toxicity of the intermediate product 3-hydroxypropionaldehyde (3-HPA), the minimization of 3-HPA accumulation is critical for enhancing the productivity of 3-HP. In this study, we identified a novel aldehyde dehydrogenase, GabD4 from Cupriavidus necator, and found that it possessed the highest enzyme activity toward 3-HPA reported to date. To augment the activity of GabD4, several variants were obtained by site-directed and saturation mutagenesis based on homology modeling. Escherichia coli transformed with the mutant GabD4_E209Q/E269Q showed the highest enzyme activity, which was 1.4-fold higher than that of wild type GabD4, and produced up to 71.9 g L(-1) of 3-HP with a productivity of 1.8 g L(-1) h(-1) . To the best of our knowledge, these are the highest 3-HP titer and productivity values among those reported in the literature. Additionally, our study demonstrates that GabD4 can be a key enzyme for the development of industrial 3-HP-producing microbial strains, and provides further insight into the mechanism of aldehyde dehydrogenase activity.

Elevated production of 3-hydroxypropionic acid by metabolic engineering of the glycerol metabolism in Escherichia coli.

3-Hydroxypropionic acid (3-HP) is a renewable-based platform chemical which may be used to produce a wide range of chemicals including acrylic acid, 1,3-propanediol, and acrylamide. Commercialization of microbial 3-HP production from glycerol, which is produced inexpensively as a by-product of biodiesel production, could be expedited when global biodiesel production increases significantly. For enhancing 3-HP production, this study aimed to investigate metabolic engineering strategies towards eliminating by-products of 3-HP as well as optimizing the glycerol metabolism. The removal of genes involved in the generation of major by-products of 3-HP including acetate and 1,3-propanediol increased both 3-HP production level (28.1g/L) and its average yield (0.217g/g). Optimization of l-arabinose inducible expression of glycerol kinase GlpK, which catalyzes the conversion of glycerol to glycerol-3-phosphate, was also made to increase the metabolic flow from glycerol to 3-HP. To activate the whole glycerol metabolism towards 3-HP, the regulatory factor repressing the utilization of glycerol in Escherichia coli, encoded by glpR was eliminated by knocking-out in its chromosomal DNA. The resulting strain showed a significant improvement in the glycerol utilization rate as well as 3-HP titer (40.5g/L). The transcriptional analysis of glpR deletion mutant revealed the poor expression of glycerol facilitator GlpF, which is involved in glycerol transport in the cell. Additional expression of glpF in the glpR deletion mutant successfully led to an increase in 3-HP production (42.1g/L) and an average yield (0.268g/g).

Improving mechanical fatigue resistance by optimizing the nanoporous structure of inkjet-printed Ag electrodes for flexible devices.

The development of highly conductive metallic electrodes with long-term reliability is in great demand for real industrialization of flexible electronics, which undergo repeated mechanical deformation during service. In the case of vacuum-deposited metallic electrodes, adequate conductivity is provided, but it degrades gradually during cyclic mechanical deformation. Here, we demonstrate a long-term reliable Ag electrode by inkjet printing. The electrical conductivity and the mechanical reliability during cyclic bending are investigated with respect to the nanoporous microstructure caused by post heat treatment, and are compared to those of evaporated Ag films of the same thickness. It is shown that there is an optimized nanoporous microstructure for inkjet-printed Ag films, which provides a high conductivity and improved reliability. It is argued that the nanoporous microstructure ensures connectivity within the particle network and at the same time reduces plastic deformation and the formation of fatigue damage. This concept provides a new guideline to develop an efficient method for highly conductive and reliable metallic electrodes for flexible electronics.

Origin of size dependency in coherent-twin-propagation-mediated tensile deformation of noble metal nanowires.

Researchers have recently discovered ultrastrong and ductile behavior of Au nanowires (NWs) through long-ranged coherent-twin-propagation. An elusive but fundamentally important question arises whether the size and surface effects impact the twin propagation behavior with a decreasing diameter. In this work, we demonstrate size-dependent strength behavior of ultrastrong and ductile metallic NWs. For Au, Pd, and AuPd NWs, high ductility of about 50% is observed through coherent twin propagation, which occurs by a concurrent reorientation of the bounding surfaces from {111} to {100}. Importantly, the ductility is not reduced with an increase in strength, while the twin propagation stress dramatically increases with decreasing NW diameter from 250 to 40 nm. Furthermore, we find that the power-law exponent describing the twin propagation stress is fundamentally different from the exponent describing the size-dependence of the yield strength. Specifically, the inverse diameter-dependence of the twin propagation stress is directly attributed to surface reorientation, which can be captured by a surface energy differential model. Our work further highlights the fundamental role that surface reorientations play in enhancing the size-dependent mechanical behavior and properties of metal NWs that imply the feasibility of high efficiency mechanical energy storage devices suggested before.

[Factors Influencing the COVID-19 Vaccination Intentions in Parents for Their Children Aged 5~11: Korea, April 2022].

PURPOSE: This study aimed to investigate COVID-19 vaccination intentions in Korean parents for their children aged 5 to 11 years and the factors influencing them. METHODS: A cross-sectional online survey of 363 parents of children aged 5 to 11 years was conducted in Korea in April 2022. Data were analyzed using independent t-test, χ²-test, Fisher's exact test, and hierarchical logistic regression analysis using SPSS/WIN 26.0 and MedCalc software version 20.113. RESULTS: Of 363 Korean parents with children aged 5 to 11, 42.4% intended to vaccinate their children. Significant factors influencing vaccination intention were the second or third birth order of children (OR = 3.45, 95% CI = 1.45~8.21), vaccine hesitancy-confidence (OR = 2.00, 95% CI = 1.51~2.65), vaccine hesitancy-collective responsibility (OR = 1.57, 95% CI: 1.10~2.25), and COVID-19 anxiety-avoidance (OR = 1.55, 95% CI = 1.13~2.11). CONCLUSION: Findings suggest that COVID-19 vaccine campaigns based on reliable information and evidence from health authorities are needed to increase COVID-19 vaccination. Well-designed health communications for the target population may help to increase parental vaccine acceptance.

Intertwined CNT Assemblies as an All-Around Current Collector for Volume-Efficient Lithium-Ion Hybrid Capacitors.

The increasing demands for conversion systems for clean energy, wearable devices powered by energy storage systems, and electric vehicles have greatly promoted the development of innovative current collectors to replace conventional metal-based foils, including those in multidimensional forms. In this study, carbon nanotubes (CNTs) with desirable features and ease of processing are used in the preparation of floating catalyst-chemical vapor deposition-derived CNT sheets for potential use as all-around current collectors in two representative energy storage devices: batteries and electrochemical capacitors. Due to their short and multidirectional electron pathways and multimodal porous structures, CNT-based current collectors enhance ion transport kinetics and provide many ion adsorption and desorption sites, which are crucial for improving the performance of batteries and electrochemical capacitors, respectively. By assembling activated carbon-CNT cathodes and prelithiated graphite-CNT anodes, high-performance lithium-ion hybrid capacitors (LIHCs) are successfully demonstrated. Briefly, CNT-based LIHCs exhibit 170% larger volumetric capacities, 24% faster rate capabilities, and 21% enhanced cycling stabilities relative to LIHCs based on conventional metallic current collectors. Therefore, CNT-based current collectors are the most promising candidates for replacing currently used metallic materials and provide a valuable opportunity to possibly redefine the roles of current collectors.

Zygote structure enables pluripotent shape-transforming deployable structure.

We propose an algorithmic framework of a pluripotent structure evolving from a simple compact structure into diverse complex 3D structures for designing the shape-transformable, reconfigurable, and deployable structures and robots. Our algorithmic approach suggests a way of transforming a compact structure consisting of uniform building blocks into a large, desired 3D shape. Analogous to a fertilized egg cell that can grow into a preprogrammed shape according to coded information, compactly stacked panels named the zygote structure can evolve into arbitrary 3D structures by programming their connection path. Our stacking algorithm obtains this coded sequence by inversely stacking the voxelized surface of the desired structure into a tree. Applying the connection path obtained by the stacking algorithm, the compactly stacked panels named the zygote structure can be deployed into diverse large 3D structures. We conceptually demonstrated our pluripotent evolving structure by energy-releasing commercial spring hinges and thermally actuated shape memory alloy hinges, respectively. We also show that the proposed concept enables the fabrication of large structures in a significantly smaller workspace.

Fatigue-free, electrically reliable copper electrode with nanohole array.

Design and fabrication of reliable electrodes is one of the most important challenges in flexible devices, which undergo repeated deformation. In conventional approaches, mechanical and electrical properties of continuous metal films degrade gradually because of the fatigue damage. The designed incorporation of nanoholes into Cu electrodes can enhance the reliability. In this study, the electrode shows extremely low electrical resistance change during bending fatigue because the nanoholes suppress crack initiation by preventing protrusion formation and damage propagation by crack tip blunting. This concept provides a key guideline for developing fatigue-free flexible electrodes.

Fibroblasts Close a Void in Free Space by a Purse-String Mechanism.

The mechanism by which stromal cells fill voids in injured tissue remains a fundamental question in regenerative medicine. While it is well-established that fibroblasts fill voids by depositing extracellular matrix (ECM) proteins as they migrate toward the wound site, little is known about their ability to adopt an epithelial-like purse-string behavior. To investigate fibroblast behavior during gap closure, we created an artificial wound with a large void space. We discovered that fibroblasts could form a free-standing bridge over deep microvoids, closing the void via purse-string contraction, a mechanism previously thought to be unique to epithelial wound closure. The findings also revealed that myosin II mediated contractility and intercellular adherent junctions were required for the closure of the fibroblast gap in our fabricated three-dimensional artificial wound. To fulfill their repair function under the specific microenvironmental conditions of wounds, fibroblasts appeared to acquire the structural features of epithelial cells, namely, contractile actin bundles that span over multiple cells along the boundary. These findings shed light on a novel mechanism by which stromal cells bridge the 3D gap during physiological processes such as morphogenesis and wound healing.

An epifluidic electronic patch with spiking sweat clearance for event-driven perspiration monitoring.

Sensory neurons generate spike patterns upon receiving external stimuli and encode key information to the spike patterns, enabling energy-efficient external information processing. Herein, we report an epifluidic electronic patch with spiking sweat clearance using a sensor containing a vertical sweat-collecting channel for event-driven, energy-efficient, long-term wireless monitoring of epidermal perspiration dynamics. Our sweat sensor contains nanomesh electrodes on its inner wall of the channel and unique sweat-clearing structures. During perspiration, repeated filling and abrupt emptying of the vertical sweat-collecting channel generate electrical spike patterns with the sweat rate and ionic conductivity proportional to the spike frequency and amplitude over a wide dynamic range and long time (> 8 h). With such 'spiking' sweat clearance and corresponding electronic spike patterns, the epifluidic wireless patch successfully decodes epidermal perspiration dynamics in an event-driven manner at different skin locations during exercise, consuming less than 0.6% of the energy required for continuous data transmission. Our patch could integrate various on-skin sensors and emerging edge computing technologies for energy-efficient, intelligent digital healthcare.

Exploiting elastic buckling of high-strength gold nanowire toward stable electrical probing.

Buckling is a loss of structural stability. It occurs in long slender structures or thin plate structures which is subjected to compressive forces. For the structural materials, such a sudden change in shape has been considered to be avoided. In this study, we utilize the Au nanowire's buckling instability for the electrical measurement. We confirmed that the high-strength single crystalline Au nanowire with an aspect ratio of 150 and 230-nm-diameter shows classical Euler buckling under constant compressive force without failure. The buckling instability enables stable contact between the Au nanowire and the substrate without any damage. Clearly, the in situ electrical measurement shows a transition of the contact resistance between the nanowire and the substrate from the Sharvin (ballistic limit) mode to the Holm (Ohmic) mode during deformation, enabling reliable electrical measurements. This study suggests Au nanowire probes exhibiting structural instability to ensure stable and precise electrical measurements at the nanoscale.

Large-Scale, Lightweight, and Robust Nanocomposites Based on Ruthenium-Decorated Carbon Nanosheets for Deformable Electrochemical Capacitors.

Despite the increase in demand for deformable electrochemical capacitors as a power source for wearable electronics, significant obstacles remain in developing these capacitors, including their manufacturing complexity and insufficient deformability. With recognition of these challenges, a facile strategy is proposed to fabricate large-scale, lightweight, and mechanically robust composite electrodes composed of ruthenium nanoparticles embedded in freestanding carbon nanotube (CNT)-based nanosheets (Ru@a-CNTs). Surface-modified CNT sheets with hierarchical porous structures can behave as an ideal platform to accommodate a large number of uniformly distributed Ru nanoparticles (Ru/CNT weight ratio of 5:1) while improving compatibility with aqueous electrolytes. Accordingly, Ru@a-CNTs offer a large electrochemically active area, showing a high specific capacitance (∼253.3 F g-1) and stability for over 2000 cycles. More importantly, the exceptional performance and mechanical durability of quasi-solid-state capacitors assembled with Ru@a-CNTs and a PVA-H3PO4 hydrogel electrolyte are successfully demonstrated in that 94% of the initial capacitance is retained after 100 000 cycles of bending deformation and a commercial smartwatch is charged by multiple cells. The feasible large-scale production and potential applicability shown in this study provide a simple and highly effective design strategy for a wide range of energy storage applications from small- to large-scale wearable electronics.