Effect of Ishige okamurae Extract on Osteoclastogenesis In Vitro and In Vivo.

We demonstrated the effect of Ishige okamurae extract (IOE) on the receptor activator of nuclear factor-κB ligand (RANKL)-promoted osteoclastogenesis in RAW 264.7 cells and confirmed that IOE inhibited RANKL-induced tartrate-resistant acid phosphatase (TRAP) activity and osteoclast differentiation. IOE inhibited protein expression of TRAP, metallopeptidase-9 (MMP-9), the calcitonin receptor (CTR), and cathepsin K (CTK). IOE treatment suppressed the expression of activated T cell cytoplasmic 1 and activator protein-1, thus controlling the expression of osteoclast-related factors. Moreover, IOE significantly reduced RANKL-phosphorylated extracellular signal-regulated kinase (ERK) and c-Jun N-terminal kinase (JNK). It also reduced the RANKL-induced phosphorylation of NF-κB and nuclear translocation of p65. IOE inhibited Dex-induced bone loss and osteoclast-related gene expression in zebrafish larvae. HPLC analysis shows that IOE consists of 3.13% and 3.42% DPHC and IPA, respectively. Our results show that IOE has inhibitory effects on osteoclastogenesis in vitro and in vivo and is a potential therapeutic for osteoporosis.

Effect of Spatial Heterogeneity on the Unusual Uptake Behavior of Multivariate-Metal-Organic Frameworks.

The uniqueness of multivariate metal-organic frameworks (MTV-MOFs) has been widely explored to discover their unknown opportunities. While mesoscopic apportionments have been studied, macroscopic heterogeneity and its spatial effects remain unexplored in MTV-MOFs. In this study, we investigated the effect of macroscopic heterogeneity on MTV-MOFs on their uptake behaviors by comparing three types of MTV-MOFs having the functional groups in inner, outer, or entire parts of crystals. Their adsorption behavior for carbon dioxide (CO2) and water (H2O) brought out that functional groups located in the outer part of the crystals dominantly influence the sorption behavior of MTV-MOFs. These results are also visualized by observing iodine adsorption in the three types of MTV-MOFs using scanning transmission electron microscopy-electron energy loss spectroscopy. We believe that this finding provides new ways to decipher and design MTV-MOFs for their unusual properties.

Cathodes Coating Layer with Li-Ion Diffusion Selectivity Employing Interactive Network of Metal-Organic Polyhedras for Li-Ion Batteries.

Surface modification of cathodes using Ni-rich coating layers prevents bulk and surface degradation for the stable operation of Li-ion batteries at high voltages. However, insulating and dense inorganic coating layers often impede charge transfer and ion diffusion kinetics. In this study, the fabrication of dual functional coating materials using metal-organic polyhedra (MOP) with 3D networks within microporous units of Li-ion batteries for surface stabilization and facile ion diffusion is proposed. Zr-based MOP is modified by introducing acyl groups as a chemical linkage (MOPAC), and MOPAC layers are homogenously coated by simple spray coating on the cathode. The coating allow the smooth transport of electrons and ions. MOPAC effectively suppress side reactions between the cathode and electrolyte and protect active materials against aggressive fluoride ions by forming a Li-ion selective passivation film. The MOPAC-coated Ni-rich layered cathode exhibited better cycle retention and enhanced kinetic properties than pristine and MOP-coated cathodes. Reduction of undesirable gas evolution on the cathode by MOPAC is also verified. Microporous MOPAC coating can simultaneously stabilize both the bulk and surface of the Ni-rich layered cathode and maintain good electrochemical reaction kinetics for high-performance Li-ion batteries.

Exploiting the Specific Isotope-Selective Adsorption of Metal-Organic Framework for Hydrogen Isotope Separation.

Adsorptive separation using narrow-micropore adsorbents has demonstrated the potential to separate hydrogen isotopes. In this work, we employed an isotope-responsive separation using cobalt formate. A D2-responsive third sorption step was revealed, and consequently, a noticeable difference was observed in the uptakes of D2 and H2. This may have resulted from the additional space created for D2 due to its dense packing, as DFT calculations revealed that cobalt formate possesses 2.26 kJ/mol higher binding strength for D2 than for H2. The exploitation of this D2-responsive third sorption step renders a promising separation performance, with a D2/H2 selectivity of up to 44 at 25 K/1 bar. Lastly, cobalt formate was synthesized on a gram scale here, which makes it a prospect for commercialization.

Recent advances in process engineering and upcoming applications of metal-organic frameworks.

Progress in metal-organic frameworks (MOFs) has advanced from fundamental chemistry to engineering processes and applications, resulting in new industrial opportunities. The unique features of MOFs, such as their permanent porosity, high surface area, and structural flexibility, continue to draw industrial interest outside the traditional MOF field, both to solve existing challenges and to create new businesses. In this context, diverse research has been directed toward commercializing MOFs, but such studies have been performed according to a variety of individual goals. Therefore, there have been limited opportunities to share the challenges, goals, and findings with most of the MOF field. In this review, we examine the issues and demands for MOF commercialization and investigate recent advances in MOF process engineering and applications. Specifically, we discuss the criteria for MOF commercialization from the views of stability, producibility, regulations, and production cost. This review covers progress in the mass production and formation of MOFs along with future applications that are not currently well known but have high potential for new areas of MOF commercialization.

WHO implementation workshop on guidelines on procedures and data requirements for changes to approved biotherapeutic products, Seoul, Republic of Korea, 25-26 June 2019.

The first global workshop on implementation of the WHO guidelines on procedures and data requirements for changes to approved biotherapeutic products adopted by the WHO Expert Committee in 2018 was held in June 2019. The workshop participants recognized that the principles based on sound science and the potential for risk, as described in the WHO Guidelines on post-approval changes, which constitute the global standard for product life-cycle management are providing clarity and helping national regulatory authorities in establishing guidance while improving time-lines for an efficient regulation of products. Consequently, the regulatory situation for post-approval changes and guideline implementation is changing but there is a disparity between different countries. While the guidelines are gradually being implemented in some countries and also being considered in other countries, the need for regional workshops and further training on post-approval changes was a common theme reiterated by many participants. Given the complexities relating to post-approval changes in different regions/countries, there was a clear understanding among all participants that an efficient approach for product life-cycle management at a national level is needed to ensure faster availability of high standard, safe and efficacious medicines to patients as per the World Health Assembly Resolution 67.21.

Rescaling of metal oxide nanocrystals for energy storage having high capacitance and energy density with robust cycle life.

Nanocrystals are promising structures, but they are too large for achieving maximum energy storage performance. We show that rescaling 3-nm particles through lithiation followed by delithiation leads to high-performance energy storage by realizing high capacitance close to the theoretical capacitance available via ion-to-atom redox reactions. Reactive force-field (ReaxFF) molecular dynamics simulations support the conclusion that Li atoms react with nickel oxide nanocrystals (NiO-n) to form lithiated core-shell structures (Ni:Li2O), whereas subsequent delithiation causes Ni:Li2O to form atomic clusters of NiO-a. This is consistent with in situ X-ray photoelectron and optical spectroscopy results showing that Ni(2+) of the nanocrystal changes during lithiation-delithiation through Ni(0) and back to Ni(2+). These processes are also demonstrated to provide a generic route to rescale another metal oxide. Furthermore, assembling NiO-a into the positive electrode of an asymmetric device enables extraction of full capacitance for a counter negative electrode, giving high energy density in addition to robust capacitance retention over 100,000 cycles.

Plasmon-Enhanced Photocatalytic CO(2) Conversion within Metal-Organic Frameworks under Visible Light.

Materials development for artificial photosynthesis, in particular, CO2 reduction, has been under extensive efforts, ranging from inorganic semiconductors to molecular complexes. In this report, we demonstrate a metal-organic framework (MOF)-coated nanoparticle photocatalyst with enhanced CO2 reduction activity and stability, which stems from having two different functional units for activity enhancement and catalytic stability combined together as a single construct. Covalently attaching a CO2-to-CO conversion photocatalyst ReI(CO)3(BPYDC)Cl, BPYDC = 2,2'-bipyridine-5,5'-dicarboxylate, to a zirconium MOF, UiO-67 (Ren-MOF), prevents dimerization leading to deactivation. By systematically controlling its density in the framework (n = 0, 1, 2, 3, 5, 11, 16, and 24 complexes per unit cell), the highest photocatalytic activity was found for Re3-MOF. Structural analysis of Ren-MOFs suggests that a fine balance of proximity between photoactive centers is needed for cooperatively enhanced photocatalytic activity, where an optimum number of Re complexes per unit cell should reach the highest activity. Based on the structure-activity correlation of Ren-MOFs, Re3-MOF was coated onto Ag nanocubes (Ag⊂Re3-MOF), which spatially confined photoactive Re centers to the intensified near-surface electric fields at the surface of Ag nanocubes, resulting in a 7-fold enhancement of CO2-to-CO conversion under visible light with long-term stability maintained up to 48 h.

Broadband Light Absorption and Efficient Charge Separation Using a Light Scattering Layer with Mixed Cavities for High-Performance Perovskite Photovoltaic Cells with Stability.

CH3 NH3 PbI3 is one of the promising light sensitizers for perovskite photovoltaic cells, but a thick layer is required to enhance light absorption in the long-wavelength regime ranging from PbI2 absorption edge (500 nm) to its optical band-gap edge (780 nm) in visible light. Meanwhile, the thick perovskite layer suppresses visible-light absorption in the short wavelengths below 500 nm and charge extraction capability of electron-hole pairs produced upon light absorption. Herein, we find that a new light scattering layer with the mixed cavities of sizes in 100 and 200 nm between transparent fluorine-doped tin oxide and mesoporous titanium dioxide electron transport layer enables full absorption of short-wavelength photons (λ < 500 nm) to the perovskite along with enhanced absorption of long-wavelength photons (500 nm < λ < 780 nm). Moreover, the light-driven electric field is proven to allow efficient charge extraction upon light absorption, thereby leading to the increased photocurrent density as well as the fill factor prompted by the slow recombination rate. Additionally, the photocurrent density of the cell with a light scattering layer of mixed cavities is stabilized due to suppressed charge accumulation. Consequently, this work provides a new route to realize broadband light harvesting of visible light for high-performance perovskite photovoltaic cells.

Tailoring Nanocrystalline Metal-Organic Frameworks as Fluorescent Dye Carriers for Bioimaging.

Challenges exist in taking advantage of dye molecules for reliable and reproducible molecular probes in biomedical applications. In this study, we show how to utilize the dye molecules for bioimaging within protective carriers of nanocrystalline metal-organic frameworks (nMOFs) particles. Specifically, Resorufin and Rhodamine-6G having different molecular sizes were encapsulated within close-fitting pores of nMOF-801 and nUiO-67 particles, respectively. The resulting nanocrystalline particles have high crystallinity, uniform size, and morphology and preserve enhanced photoluminescence properties with exceptional stabilities in biomedical environment. The samples are further functionalized with a targeting agent and successfully work for fluorescence imaging of FL83B (human hepatocyte cell) and HepG2 (human hepatocellular carcinoma) without cytotoxicity.

Copper Nanocrystals Encapsulated in Zr-based Metal-Organic Frameworks for Highly Selective CO2 Hydrogenation to Methanol.

We show that the activity and selectivity of Cu catalyst can be promoted by a Zr-based metal-organic framework (MOF), Zr6O4(OH)4(BDC)6 (BDC = 1,4-benzenedicarboxylate), UiO-66, to have a strong interaction with Zr oxide [Zr6O4(OH)4(-CO2)12] secondary building units (SBUs) of the MOF for CO2 hydrogenation to methanol. These interesting features are achieved by a catalyst composed of 18 nm single Cu nanocrystal (NC) encapsulated within single crystal UiO-66 (Cu⊂UiO-66). The performance of this catalyst construct exceeds the benchmark Cu/ZnO/Al2O3 catalyst and gives a steady 8-fold enhanced yield and 100% selectivity for methanol. The X-ray photoelectron spectroscopy data obtained on the surface of the catalyst show that Zr 3d binding energy is shifted toward lower oxidation state in the presence of Cu NC, suggesting that there is a strong interaction between Cu NC and Zr oxide SBUs of the MOF to make a highly active Cu catalyst.

Red ginseng powder fermented with probiotics exerts antidiabetic effects in the streptozotocin-induced mouse diabetes model.

CONTEXT: Red ginseng (heat-processed Panax ginseng) is a well-known alternative medicine with pharmacological antidiabetic activity. It exerts pharmacological effects through the transformation of saponin into metabolites by the intestinal microbiota. Given that intestinal conditions and intestinal microflora vary among individuals, the pharmacological effects of orally administered red ginseng likely may vary among individuals. OBJECTIVE: To overcome this variation and produce homogeneously effective red ginseng, we evaluated the antidiabetic effects of probiotic-fermented red ginseng in a mouse model. MATERIALS AND METHODS: The antidiabetic efficacy of orally administered probiotic-fermented red ginseng was assessed in ICR mice after induction of diabetes using streptozotocin (170 mg/kg body weight). Samples were given orally for 8 weeks, and indicators involved in diabetic disorders such as body weight change, water intake, blood glucose, glucose tolerance and various biochemical parameters were determined. RESULTS: Oral administration of probiotic-fermented red ginseng significantly decreased the level of blood glucose of about 62.5% in the fasting state and induced a significant increase in glucose tolerance of about 10.2% compared to the control diabetic mice. Additionally, various indicators of diabetes and biochemical data (e.g., blood glycosylated haemoglobin level, serum concentrations of insulin, and α-amylase activity) showed a significant improvement in the diabetic conditions of the mice treated with probiotic-fermented red ginseng in comparison with those of control diabetic mice. DISCUSSION AND CONCLUSION: Our results demonstrate the antidiabetic effects of probiotic-fermented red ginseng in the streptozotocin-induced mouse diabetes model and suggest that probiotic-fermented red ginseng may be a uniformly effective red ginseng product.

Combination with Red ginseng and Polygoni Multiflori ameliorates highfructose diet induced metabolic syndrome.

BACKGROUND: Metabolic syndrome such as dyslipidemia, hypertension, obesity, impaired glucose tolerance and fatty liver, can be caused by modification of diet by means of overconsumption of high fructose diet. This study was designed to investigate whether combination with Red ginseng and Polygoni Multiflori Radix (RGPM), widely used traditional herbal medicine, ameliorates on highfructose (HF) diet-induced metabolic syndrome. METHODS: SD rats were fed the 60% HF diet with/without rosiglitazone, and RGPM 100, 300 mg/kg/day, respectively. All groups received regular diet or HF diet, respectively, for 8 weeks. The last three groups treatment of rosiglitazone and RPGM orally for a period of 6 weeks. RESULTS: Chronic treatment with RGPM significantly decreased body weight, fat weight and adipocyte size. RGPM significantly prevented the development of the metabolic disturbances such as hypertension, hyperlipidemia and impaired glucose tolerance. RGPM also led to increase in high density lipoprotein level in the HF group. RGPM suppressed high-fructose diet induced vascular inflammation marker expression such as adhesion molecules and ET-1 in aorta as well as increasing of C-reactive protein (CRP) levels in plasma. Similarly, RGPM attenuated hepatic lipid accumulation by inhibition of monocyte chemoattractant protein-1 (MCP-1) expression. CONCLUSION: An administration of RGPM may be a beneficial therapy for the treatment of metabolic syndrome through the improvement of hypertension, obesity, hyperlipidemia, vascular inflammation and insulin resistance.

Chemical Environment Control and Enhanced Catalytic Performance of Platinum Nanoparticles Embedded in Nanocrystalline Metal-Organic Frameworks.

Chemical environment control of the metal nanoparticles (NPs) embedded in nanocrystalline metal-organic frameworks (nMOFs) is useful in controlling the activity and selectivity of catalytic reactions. In this report, organic linkers with two functional groups, sulfonic acid (-SO3H, S) and ammonium (-NH3(+), N), are chosen as strong and weak acidic functionalities, respectively, and then incorporated into a MOF [Zr6O4(OH)4(BDC)6 (BDC = 1,4-benzenedicarboxylate), termed UiO-66] separately or together in the presence of 2.5 nm Pt NPs to build a series of Pt NPs-embedded in UiO-66 (Pt⊂nUiO-66). We find that these chemical functionalities play a critical role in product selectivity and activity in the gas-phase conversion of methylcyclopentane (MCP) to acyclic isomer, olefins, cyclohexane, and benzene. Pt⊂nUiO-66-S gives the highest selectivity to C6-cyclic products (62.4% and 28.6% for cyclohexane and benzene, respectively) without acyclic isomers products. Moreover, its catalytic activity was doubled relative to the nonfunctionalized Pt⊂nUiO-66. In contrast, Pt⊂nUiO-66-N decreases selectivity for C6-cyclic products to <50% while increases the acyclic isomer selectivity to 38.6%. Interestingly, the Pt⊂nUiO-66-SN containing both functional groups gave different product selectivity than their constituents; no cyclohexane was produced, while benzene was the dominant product with olefins and acyclic isomers as minor products. All Pt⊂nUiO-66 catalysts with different functionalities remain intact and maintain their crystal structure, morphology, and chemical functionalities without catalytic deactivation after reactions over 8 h.

Metal nanocrystals embedded in single nanocrystals of MOFs give unusual selectivity as heterogeneous catalysts.

The growth of nanocrystalline metal-organic frameworks (nMOFs) around metal nanocrystals (NCs) is useful in controlling the chemistry and metric of metal NCs. In this Letter, we show rare examples of nMOFs grown in monocrystalline form around metal NCs. Specifically, Pt NCs were subjected to reactions yielding Zr(IV) nMOFs [Zr6O4(OH)4(fumarate)6, MOF-801; Zr6O4(OH)4(BDC)6 (BDC = 1,4-benzenedicarboxylate), UiO-66; Zr6O4(OH)4(BPDC)6 (BPDC = 4,4'-biphenyldicarboxylate), UiO-67] as a single crystal within which the Pt NCs are embedded. These constructs (Pt⊂nMOF)nanocrystal are found to be active in gas-phase hydrogenative conversion of methylcyclopentane (MCP) and give unusual product selectivity. The Pt⊂nUiO-66 shows selectivity to C6-cyclic hydrocarbons such as cyclohexane and benzene that takes place with 100 °C lower temperature than the standard reaction (Pt-on-SiO2). We observe a pore size effect in the nMOF series where the small pore of Pt⊂nMOF-801 does not produce the same products, while the larger pore Pt⊂nUiO-67 catalyst provides the same products but with different selectivity. The (Pt⊂nMOF)nanocrystal spent catalyst is found to maintain the original crystallinity, and be recyclable without any byproduct residues.

Effect of Silicone Patch Containing Metal-organic Framework on Hypertrophic Scar Suppression.

BACKGROUND/AIM: Hypertrophic scars (HS) are an abnormal cutaneous condition of wound healing characterized by excessive fibrosis and disrupted collagen deposition. This study assessed the potential of a silicone patch embedded with chemically stable zirconium-based metal-organic frameworks (MOF)-808 structures to mitigate HS formation using a rabbit ear model. MATERIALS AND METHODS: A silicone patch was strategically engineered by incorporating Zr-MOF-808, a composite structure comprising metal ions and organic ligands. Structural integrity of the Zr-MOF-808 silicone patch was validated using scanning electron microscopy and X-ray diffraction analysis. The animals were divided into three groups: a control, no treatment group (Group 1), a silicone patch treatment group (Group 2), and a group treated with a 0.2% loaded Zr-MOF-808 silicone patch (Group 3). HS suppression effects were quantified using scar elevation index (SEI), dorsal skin thickness measurements, and myofibroblast protein expression. RESULTS: Histopathological examination of post-treatment HS samples revealed substantial reductions in SEI (34.6%) and epidermal thickness (49.5%) in Group 3. Scar hyperplasia was significantly diminished by 53.5% (p<0.05), while collagen density declined by 15.7% in Group 3 compared to Group 1. Western blot analysis of protein markers, including TGF-ß1, collagen-1, and α-SMA, exhibited diminished levels by 8.8%, 12%, and 21.3%, respectively, in Group 3, and substantially higher levels by 21.9%, 27%, and 39.9%, respectively, in Group 2. On the 35th day post-wound generation, Zr-MOF-808-treated models exhibited smoother, less conspicuous, and flatter scars. CONCLUSION: Zr-MOF-808-loaded silicone patch reduced HS formation in rabbit ear models by inducing the proliferation and remodeling of the wound healing process.

Inhibition of Polyphosphate Degradation in Synechocystis sp. PCC6803 through Inactivation of the phoU Gene.

Phosphorus is an essential but non-renewable nutrient resource critical for agriculture. Luxury phosphorus uptake allows microalgae to synthesize polyphosphate and accumulate phosphorus, but, depending on the strain of algae, polyphosphate may be degraded within 4 hours of accumulation. We studied the recovery of phosphorus from wastewater through luxury uptake by an engineered strain of Synechocystis sp. with inhibited polyphosphate degradation and the effect of this engineered Synechocystis biomass on lettuce growth. First, a strain (ΔphoU) lacking the phoU gene, which encodes a negative regulator of environmental phosphate concentrations, was generated to inhibit polyphosphate degradation in cells. Polyphosphate concentrations in the phoU knock-out strain were maintained for 24 h and then decreased slowly. In contrast, polyphosphate concentrations in the wild-type strain increased up to 4 h and then decreased rapidly. In addition, polyphosphate concentration in the phoU knockout strain cultured in semi-permeable membrane bioreactors with artificial wastewater medium was 2.5 times higher than that in the wild type and decreased to only 16% after 48 h. The biomass of lettuce treated with the phoU knockout strain (0.157 mg P/m2) was 38% higher than that of the lettuce treated with the control group. These results indicate that treating lettuce with this microalgal biomass can be beneficial to crop growth. These results suggest that the use of polyphosphate-accumulating microalgae as biofertilizers may alleviate the effects of a diminishing phosphorous supply. These findings can be used as a basis for additional genetic engineering to increase intracellular polyphosphate levels.

Zirconium-Based Metal-Organic Framework Capable of Binding Proinflammatory Mediators in Hydrogel Form Promotes Wound Healing Process through a Multiscale Adsorption Mechanism.

The regulation of proinflammatory mediators has been explored to promote natural healing without abnormal inflammation or autoimmune response induced by their overproduction. However, most efforts to control these mediators have relied on pharmacological substances that are directly engaged in biological cycles. It is believed that functional porous materials removing target mediators provide a new way to promote the healing process using their adsorption mechanisms. In this study, the Zr-based metal-organic frameworks (MOF)-808 (Zr6 O4 (OH)4 (BTC)2 (HCOO)6 ) crystals are found to be effective at removing proinflammatory mediators, such as nitric oxide (NO), cytokines, and reactive oxygen species (ROS) in vitro and in vivo, because of their porous structure and surface affinity. The MOF-808 crystals are applied to an in vivo skin wound model as a hydrogel dispersion. Hydrogel containing 0.2 wt% MOF-808 crystals shows significant improvement in terms of wound healing efficacy and quality over the corresponding control. It is also proven that the mode of action is to remove the proinflammatory mediators in vivo. Moreover, the application of MOF-808-containing hydrogels promotes cell activation, proliferation and inhibits chronic inflammation, leading to increased wound healing quality. These findings suggest that Zr-based MOFs may be a promising drug-free solution for skin problems related to proinflammatory mediators.

Porphyrin-POSS molecular hybrids.

Porphyrin-POSS hybrid: Porphyrin-POSS molecular hybrid composites (see scheme; POSS = polyhedral oligomeric silsesquioxanes) were synthesized and structurally characterized, allowing the realization of truly homogenous dispersion of basic functional building blocks between organic and inorganic components at the molecular level. These materials allow the optimization of aggregation/association behavior and thus the functional optical properties of the porphyrinato zinc compounds.

Effect of 1-methyl-D-tryptophan and adoptive transfer of dendritic cells on polymicrobial sepsis induced by cecal content injection.

A mouse model of polymicrobial sepsis induced by cecal content injection (CCI) was developed with the aim of gaining a better understanding of the mechanism of sepsis. This model has a similar survival pattern to the conventional model with the added benefits of ability to vary the severity of sepsis and greater consistency. Administration of 1-methyl-D-tryptophan (1-MT) to inhibit indoleamine 2,3-dioxygenase (IDO) in mice with CCI-induced sepsis increased the survival rate and tended to up-regulate IL-10/IL-12 serum concentrations. The effectiveness of 1-MT was confirmed by increases in IL-10 over IL-12 in bone marrow-derived dendritic cells (BMDCs) treated with LPS and 1-MT and a superior survival rate 24 hr after injection of these double treated BMDCs in the CCI-induced sepsis model. Therefore, CCI is both a useful and reliable technique for investigating polymicrobial sepsis. The present findings using this newly developed model suggest that inhibition of IDO alleviates the severity of polymicrobial sepsis and modulates the immune response even in cases of severe systemic septic inflammation.