Volatile organic compound gas sensor based on aluminum-doped zinc oxide with nanoparticle.

Thick film semiconductor gas sensors based on aluminum-doped zinc oxide (AZO) with nanoparticle size were fabricated to detect volatile organic compound (VOC) existed in building, especially, formaldehyde (HCHO) gas which was known as the cause of sick building syndrome. The sensing materials for screen printing were prepared using roll milling process with binder. The crystallite sizes of prepared materials were about 15 nm through X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM). Gas response characteristics were examined for formaldehyde (HCHO), benzene, carbon monoxide, carbon dioxide gas existing in building. In particular, the sensors showed responses to HCHO gas at sub ppm as a function of operating temperatures and gas concentrations. Also, we investigated sensitivity, repeativity, selectivity, and response time of sensor. The transients were very sharp, taking less than 2 s for 90% response. The sensor has shown very stable response at 350 degrees C and followed a very good behavior and showed 60% response in 50 ppb HCHO concentration at 350 degrees C operating temperatures.

Microvalves based on ionic polymer-metal composites for microfluidic application.

Simple and highly efficient microvalve systems based on an ionic polymer-metal composite (IPMC) diaphragm actuator have been developed. The microvalve system that was fabricated in this work operates when open and close voltage is applied, due to the phenomena of lithium ion flux and the subsequent electro-osmotic drag of water to the cathode. IPMC was prepared by compositing with platinum nanoparticles on both sides of Nafion thin film. SEM images of the IPMC showed the high density and uniform size distribution of the Pt nanoparticles in the interpenetrating layer to ensure the proper performance of an IPMC actuator. The displacement of the IPMC for the microvalve was measured with a laser displacement meter. The application of open and close voltage made the operation of the valve faster. The fluorescence images of the flow in the fabricated IPMC-based microvalve system showed the successful operation of flow control in the microfluidic channel. The IPMC-based microvalve system shows a potential of IPMC for application as an actuator in microfluidic systems.

Amphiphilic effects of dibucaine HCl on rotational mobility of n-(9-anthroyloxy)stearic acid in neuronal and model membranes.

We studied dibucaine's effects on specific locations of n-(9-anthroyloxy)palmitic acid or stearic acid (n-AS) within phospholipids of synaptosomal plasma membrane vesicles isolated from bovine cerebral cortex (SPMV) and model membranes. Giant unilamellar vesicles (GUVs) were prepared with total lipids (SPMVTL) and mixture of several phospholipids (SPMVPL) extracted from SPMV. Dibucaine.HCl increased rotational mobility (increased disordering) of hydrocarbon interior, but it decreased mobility (increased ordering) of membrane interface, in both native and model membranes. The degree of rotational mobility in accordance with the carbon atom numbers of phospholipids comprising neuronal and model membranes was in the order at the 16, 12, 9, 6 and 2 position of aliphatic chain present in phospholipids. The sensitivity of increasing or decreasing effect of rotational mobility of hydrocarbon interior or surface region by dibucaine.HCl differed depending on the neuronal and model membranes in the descending order of SPMV, SPMVPL and SPMVTL.

Charge transport of alkanethiol self-assembled monolayers in micro-via hole devices.

In this paper we fabricated 13440 microscale via hole structure devices using different length of alkanethiol self-assembled monolayers and characterized their electronic transport properties. Statistically averaged transport parameters such as current density, transport barrier height, effective electron mass, and transport decay coefficient were obtained from the great number of these devices. The yield of working microdevices was found as 1.5%. Temperature variable current-voltage characteristics for alkanethiol micro-via hole devices showed typical tunneling behavior when properly fabricated.

Nonstoichiometric Co-rich ZnCo2O4 Hollow Nanospheres for High Performance Formaldehyde Detection at ppb Levels.

Since metal oxide semiconductors were investigated as chemiresistors, rapid advances have been reported in this field. However, better performance metrics are still required, such as higher sensitivity and selectivity levels for practical applications. To improve the sensing performance, we discuss an optimal composition of the active sensing material, nonstoichiometric Co-rich ZnCo2O4, prepared by the partial substitution of Co(2+) into Zn(2+) in Co3O4 without altering a hollow sphere morphology. Remarkably, this Co-rich ZnCo2O4 phase achieved detection limits for formaldehyde as low as 13 ppb in experimental measurements and 2 ppb in theory, which were the lowest values ever reported from actual measurements at a working temperature of 225 °C. It was also unprecedented that the selectivity for formaldehyde was greatly enhanced with respect to the selectivity levels against other volatile organic compounds (VOCs). These excellent sensing performances are due to the optimal composition of the Co-rich ZnCo2O4 material with a proper hole concentration and well-organized conductive network.

Ultrasensitive and highly selective graphene-based single yarn for use in wearable gas sensor.

Electric components based on fibers or textiles have been investigated owing to their potential applications in wearable devices. High performance on response to gas, drape-ability and washing durability are of important for gas sensors based on fiber substrates. In this report, we demonstrate the bendable and washable electronic textile (e-textile) gas sensors composed of reduced graphene oxides (RGOs) using commercially available yarn and molecular glue through an electrostatic self-assembly. The e-textile gas sensor possesses chemical durability to several detergent washing treatments and mechanical stability under 1,000 bending tests at an extreme bending radius of 1 mm as well as a high response to NO2 gas at room temperature with selectivity to other gases such as acetone, ethanol, ethylene, and CO2.

Durability Improvement of Solid Electrolyte CO2 Sensor Against Humidity Variations.

The sensing materials of potentiometric CO2 sensors utilize alkali/alkali-earth metal carbonates or their combinations. However, lithium carbonate easily responds to humidity resulting in incorrect information regarding CO2 concentration. Herein, the authors report a new sensing material combination (Li2CO3/BaCO3/LiOH/Ba(OH)2 (1:2:0.05:0.1 molar ratio)) for a potentiometric CO2 sensor that is not affected by humidity. The electromotive force (EMF) of the sensor using a combination of Li2CO3, BaCO3, LiOH, and Ba(OH)2 drifted by 1.5% when the relative humidity was changed from 25% to 70%, which is superior to a drift of 6% of a sensor using Li2CO3 and BaCO3, as this sensing material is known to be robust to changes in humidity.

A 3D scaffold for ultra-sensitive reduced graphene oxide gas sensors.

An ultra-sensitive gas sensor based on a reduced graphene oxide nanofiber mat was successfully fabricated using a combination of an electrospinning method and graphene oxide wrapping through an electrostatic self-assembly, followed by a low-temperature chemical reduction. The sensor showed excellent sensitivity to NO2 gas.

Selectively hydrogenated soybean oil exerts strong anti-prostate cancer activities.

Prostate cancer is the second leading cause of male deaths due to cancer in the United States. Hydrogenated vegetable oils have been suspected of inducing adverse health effects, including atherosclerosis and cancer. Here we report that a selectively hydrogenated soybean oil (SHSO) containing a high quantity of conjugated linoleic acids showed remarkably strong anticarcinogenic activity against prostate cancer in the rat model (Copenhagen rats with MAT-LyLu syngeneic rat prostate cancer cells) study in vivo and human prostate carcinoma cell lines studies in vitro, as compared with native soybean oil. A 5% dietary supplementation with SHSO inhibited the growth of prostate cancer by 80% in vivo. The TUNEL method and immunohistochemical staining assays of bax, bcl-2, and survivin clearly showed that SHSO induced prostate cancer cell apoptosis in the tested rats. DNA fragmentation analysis in vitro further confirmed the apoptotic activity of SHSO on the MAT-LyLu prostate cancer cells. The SHSO also showed strong cytotoxicity on human prostate cancer cells (DU145 and PC3). This represents the first report demonstrating the significant anticancer activities of hydrogenated vegetable oils at low levels of dietary supplementation.

Rose bengal dye on thiol-terminated bilayer for molecular devices.

Recently, it has become increasingly important to control molecular layers, especially with regard to the formation of bilayers, in order to avoid electrical shorts in molecular electronics. In this paper, we report on the characterization of an in situ thiol-terminated bilayer that is formed by hydrogen bonding between the amine group of an aminoalkanethiol monolayer on a gold surface and the free amine group of aminoalkanethiolates in a bulk solution. We also report on the use of a rose bengal (RB) monolayer on a thiol-terminated bilayer for the purpose of application in a molecular memory device. Using surface-sensitive techniques such as grazing angle Fourier transform infrared (FT-IR) spectroscopy, quartz crystal microbalance (QCM) measurement, ellipsometry, X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV), we characterized a thiol-terminated bilayer (TUA-AUT) and an RB functionalized monolayer on a bilayered surface (RB-TUA-AUT). For a control experiment, we prepared a single RB monolayer attached by an ethanethiol group to a gold surface. In order to assess the feasibility of the present approach with respect to application in molecular electronics, we tested the switching property of the self-assembled monolayers (SAMs) using conducting-probe atomic force microscopy (CP-AFM). The RB monolayer on the bilayered surface exhibited hysteresis, while a single RB monolayer gave an electrical short.