Hyaluronan Receptor LYVE-1-Expressing Macrophages Maintain Arterial Tone through Hyaluronan-Mediated Regulation of Smooth Muscle Cell Collagen.

The maintenance of appropriate arterial tone is critically important for normal physiological arterial function. However, the cellular and molecular mechanisms remain poorly defined. Here, we have shown that in the mouse aorta, resident macrophages prevented arterial stiffness and collagen deposition in the steady state. Using phenotyping, transcriptional profiling, and targeted deletion of Csf1r, we have demonstrated that these macrophages-which are a feature of blood vessels invested with smooth muscle cells (SMCs) in both mouse and human tissues-expressed the hyaluronan (HA) receptor LYVE-l. Furthermore, we have shown they possessed the unique ability to modulate collagen expression in SMCs by matrix metalloproteinase MMP-9-dependent proteolysis through engagement of LYVE-1 with the HA pericellular matrix of SMCs. Our study has unveiled a hitherto unknown homeostatic contribution of arterial LYVE-1+ macrophages through the control of collagen production by SMCs and has identified a function of LYVE-1 in leukocytes.

Hybrid Biomimetic Interfaces Integrating Supported Lipid Bilayers with Decellularized Extracellular Matrix Components.

This paper describes the functionalization of solid supported phospholipid bilayer with decellularized extracellular matrix (dECM) components, toward the development of biomimetic platforms that more closely mimic the cell surface environment. The dECM was obtained through a combination of chemical and enzymatic treatments of mouse adipose tissue that contains collagen, fibronectin, and glycosaminoglycans (GAGs). Using amine coupling chemistry, the dECM components were attached covalently to the surface of a supported lipid bilayer containing phospholipids with reactive carboxylic acid headgroups. The bilayer formation and the kinetics of subsequent dECM conjugation were monitored by quartz crystal microbalance with dissipation (QCM-D). Fluorescence recovery after photobleaching (FRAP) confirmed the fluidity of the membrane after functionalization with dECM. The resulting hybrid biomimetic interface supports the attachment and survival of the human hepatocyte Huh 7.5 and maintains the representative hepatocellular function. Importantly, the platform is suitable for monitoring the lateral organization and clustering of cell-binding ligands and growth factor receptors in the presence of the rich biochemical profile of tissue-derived ECM components.

Comparative study of adipose-derived stem cells and bone marrow-derived stem cells in similar microenvironmental conditions.

Mesenchymal stem cells (MSCs), which were first isolated from the bone marrow, are now being extracted from various other tissues in the body, including the adipose tissue. The current study presents systematic evidence of how the adipose tissue-derived stem cells (ASCs) and bone marrow-derived mesenchymal stem cells (Bm-MSCs) behave when cultured in specific pro-adipogenic microenvironments. The cells were first characterized and identified as MSCs in terms of their morphology, phenotypic expression, self-renewal capabilities and multi-lineage potential. Subsequently, the proliferation and gene expression profiles of the cell populations cultured on two-dimensional (2D) adipose tissue extracellular matrix (ECM)-coated tissue culture plastic (TCP) and in three-dimensional (3D) AlgiMatrix® microenvironments were analyzed. Overall, it was found that adipogenesis was triggered in both cell populations due to the presence of adipose tissue ECM. However, in 3D microenvironments, ASCs and Bm-MSCs were predisposed to the adipogenic and osteogenic lineages respectively. Overall, findings from this study will contribute to ongoing efforts in adipose tissue engineering as well as provide new insights into the role of the ECM and cues provided by the immediate microenvironment for stem cell differentiation.

A multi-material coating containing chemically-modified apatites for combined enhanced bioactivity and reduced infection via a drop-on-demand micro-dispensing technique.

Prevention of infection and enhanced osseointegration are closely related, and required for a successful orthopaedic implant, which necessitate implant designs to consider both criteria in tandem. A multi-material coating containing 1:1 ratio of silicon-substituted hydroxyapatite and silver-substituted hydroxyapatite as the top functional layer, and hydroxyapatite as the base layer, was produced via the drop-on-demand micro-dispensing technique, as a strategic approach in the fight against infection along with the promotion of bone tissue regeneration. The homogeneous distribution of silicon-substituted hydroxyapatite and silver-substituted hydroxyapatite micro-droplets at alternate position in silicon-substituted hydroxyapatite-silver-substituted hydroxyapatite/hydroxyapatite coating delayed the exponential growth of Staphylococcus aureus for up to 24 h, and gave rise to up-regulated expression of alkaline phosphatase activity, type I collagen and osteocalcin as compared to hydroxyapatite and silver-substituted hydroxyapatite coatings. Despite containing reduced amounts of silicon-substituted hydroxyapatite and silver-substituted hydroxyapatite micro-droplets over the coated area than silicon-substituted hydroxyapatite and silver-substituted hydroxyapatite coatings, silicon-substituted hydroxyapatite-silver-substituted hydroxyapatite/hydroxyapatite coating exhibited effective antibacterial property with enhanced bioactivity. By exhibiting good controllability of distributing silicon-substituted hydroxyapatite, silver-substituted hydroxyapatite and hydroxyapatite micro-droplets, it was demonstrated that drop-on-demand micro-dispensing technique was capable in harnessing the advantages of silver-substituted hydroxyapatite, silicon-substituted hydroxyapatite and hydroxyapatite to produce a multi-material coating along with enhanced bioactivity and reduced infection.

Surface modification of PVDF using non-mammalian sources of collagen for enhancement of endothelial cell functionality.

Although polyvinylidene fluoride (PVDF) is non-toxic and stable in vivo, its hydrophobic surface has limited its bio-applications due to poor cell-material interaction and thrombus formation when used in blood contacting devices. In this study, surface modification of PVDF using naturally derived non-mammalian collagen was accomplished via direct surface-initiated atom transfer radical polymerisation (SI-ATRP) to enhance its cytocompatibility and hemocompatibility. Results showed that Type I collagen was successfully extracted from fish scales and bullfrog skin. The covalent immobilisation of fish scale-derived collagen (FSCOL) and bullfrog skin-derived collagen (BFCOL) onto the PVDF surface improves the attachment and proliferation of human umbilical vein endothelial cells (HUVECs). Furthermore, both FSCOL and BFCOL had comparable anti-thrombogenic profiles to that of commercially available bovine collagen (BVCOL). Also, cell surface expression of the leukocyte adhesion molecule was lower on HUVECs cultured on non-mammalian collagen surfaces than on BVCOL, which is an indication of lower pro-inflammatory response. Overall, results from this study demonstrated that non-mammalian sources of collagen could be used to confer bioactivity to PVDF, with comparable cell-material interactions and hemocompatibility to BVCOL. Additionally, higher expression levels of Type IV collagen in HUVECs cultured on FSCOL and BFCOL were observed as compared to BVCOL, which is an indication that the non-mammalian sources of collagen led to a better pro-angiogenic properties, thus making them suitable for blood contacting applications.

Comparative Study of Adipose-Derived Stem Cells From Abdomen and Breast.

BACKGROUND: Abdominal tissue enriched with adipose-derived stem cells (ASCs) is often used in cell-assisted lipotransfer procedures for breast reconstruction. However, as the tissue microenvironment and stem cell niche play important roles in defining the characteristics of the resident cells, it is hypothesized that the stem cell population present in the donor abdominal tissue has dissimilar properties as compared with the cells in the recipient breast tissue, which may ultimately affect the long-term success of the graft. METHODS: Adipose-derived stem cells were isolated from breast and abdominal fat tissues and characterized for mesenchymal-specific cell surface markers, and their population doubling, colony-forming capabilities, and proliferative properties were compared. The multilineage potential of both cell populations was also investigated. RESULTS: Adipose-derived stem cells from both tissue sites were found to possess similar marker expression and multilineage differentiation potential. However, breast fat-derived ASCs were observed to have a higher self-renewal capability and an unstable population doubling as compared with abdominal fat-derived ASCs. Gene expression studies revealed that the breast fat-derived ASCs were predisposed to the osteogenic lineage and the abdominal fat-derived ASCs to the adipogenic lineage. CONCLUSIONS: Cells derived from both fat tissues possess different characteristics in terms of their growth kinetics and predisposition to the osteolineages and adipolineages. In particular, ASCs from the abdominal tissue appear to contribute to adipose tissue turnover, whereas ASCs from breast tissue, if used for cell-assisted fat grafting, may potentially be responsible for complications in fat grafting, such as oil cysts, calcifications, fat necrosis, and tumors.

Angiopoietin-like 4 stimulates STAT3-mediated iNOS expression and enhances angiogenesis to accelerate wound healing in diabetic mice.

Impaired wound healing is a major source of morbidity in diabetic patients. Poor outcome has, in part, been related to increased inflammation, poor angiogenesis, and deficiencies in extracellular matrix components. Despite the enormous impact of these chronic wounds, effective therapies are lacking. Here, we showed that the topical application of recombinant matricellular protein angiopoietin-like 4 (ANGPTL4) accelerated wound reepithelialization in diabetic mice, in part, by improving angiogenesis. ANGPTL4 expression is markedly elevated upon normal wound injury. In contrast, ANGPTL4 expression remains low throughout the healing period in diabetic wounds. Exogenous ANGPTL4 modulated several regulatory networks involved in cell migration, angiogenesis, and inflammation, as evidenced by an altered gene expression signature. ANGPTL4 influenced the expression profile of endothelial-specific CD31 in diabetic wounds, returning its profile to that observed in wild-type wounds. We showed ANGPTL4-induced nitric oxide production through an integrin/JAK/STAT3-mediated upregulation of inducible nitric oxide synthase (iNOS) expression in wound epithelia, thus revealing a hitherto unknown mechanism by which ANGPTL4 regulated angiogenesis via keratinocyte-to-endothelial-cell communication. These data show that the replacement of ANGPTL4 may be an effective adjunctive or new therapeutic avenue for treating poor healing wounds. The present finding also confirms that therapeutic angiogenesis remains an attractive treatment modality for diabetic wound healing.

Physical and mechanical characterisation of 3D-printed porous titanium for biomedical applications.

The elastic modulus of metallic orthopaedic implants is typically 6-12 times greater than cortical bone, causing stress shielding: over time, bone atrophies through decreased mechanical strain, which can lead to fracture at the implantation site. Introducing pores into an implant will lower the modulus significantly. Three dimensional printing (3DP) is capable of producing parts with dual porosity features: micropores by process (residual pores from binder burnout) and macropores by design via a computer aided design model. Titanium was chosen due to its excellent biocompatibility, superior corrosion resistance, durability, osteointegration capability, relatively low elastic modulus, and high strength to weight ratio. The mechanical and physical properties of 3DP titanium were studied and compared to the properties of bone. The mechanical and physical properties were tailored by varying the binder (polyvinyl alcohol) content and the sintering temperature of the titanium samples. The fabricated titanium samples had a porosity of 32.2-53.4% and a compressive modulus of 0.86-2.48 GPa, within the range of cancellous bone modulus. Other physical and mechanical properties were investigated including fracture strength, density, fracture toughness, hardness and surface roughness. The correlation between the porous 3DP titanium-bulk modulus ratio and porosity was also quantified.

PDGF, TGF-beta, and FGF signaling is important for differentiation and growth of mesenchymal stem cells (MSCs): transcriptional profiling can identify markers and signaling pathways important in differentiation of MSCs into adipogenic, chondrogenic, and osteogenic lineages.

We compared the transcriptomes of marrow-derived mesenchymal stem cells (MSCs) with differentiated adipocytes, osteocytes, and chondrocytes derived from these MSCs. Using global gene-expression profiling arrays to detect RNA transcripts, we have identified markers that are specific for MSCs and their differentiated progeny. Further, we have also identified pathways that MSCs use to differentiate into adipogenic, chondrogenic, and osteogenic lineages. We identified activin-mediated transforming growth factor (TGF)-beta signaling, platelet-derived growth factor (PDGF) signaling and fibroblast growth factor (FGF) signaling as the key pathways involved in MSC differentiation. The differentiation of MSCs into these lineages is affected when these pathways are perturbed by inhibitors of cell surface receptor function. Since growth and differentiation are tightly linked processes, we also examined the importance of these 3 pathways in MSC growth. These 3 pathways were necessary and sufficient for MSC growth. Inhibiting any of these pathways slowed MSC growth, whereas a combination of TGF-beta, PDGF, and beta-FGF was sufficient to grow MSCs in a serum-free medium up to 5 passages. Thus, this study illustrates it is possible to predict signaling pathways active in cellular differentiation and growth using microarray data and experimentally verify these predictions.

Flexible conducting polymer-based cellulose substrates for on-skin applications.

Flexible electroactive cellulose-based substrates were successfully fabricated via electropolymerization of either polypyrrole (PPy) or poly(3,4-ethylenedioxythiophene) (PEDOT) in the presence of sodium dodecyl sulphate (SDS) onto platinum-coated cellulose substrates. Results showed that the conductive polymers were evenly deposited onto the platinum-coated cellulose substrates, respectively without compromising the submicro roughness topography of the substrate. In fact, nanoroughness feature was formed by the deposition of conductive polymers on the individual fibres of the cellulose paper, both of which are highly important in regulating cell adhesion, proliferation and migration. The various electroactive cellulose-based papers exhibited good mechanical and structural properties as well as good cytocompatibility by supporting the attachment and proliferation of immortalized human keratinocytes (HaCaT cells). In addition, copper (Cu2+) and the zinc (Zn2+) ions were proved to be successfully doped into these PPy- and PEDOT-cellulose substrates. The PEDOT resulted in the higher doping of Cu2+ and Zn2+ ions, which was confirmed by the ions release studies. Furthermore, the PEDOT-cellulose substrates exhibited significantly higher mechanical properties, better initial cell attachment and higher electrochemical capacitance as compared to PPy-cellulose substrates. Overall, the results suggested that the PEDOT-cellulose substrates could potentially be a better choice of smart skin dressings, integration interface between skin and artificial devices or implantable electronic materials.

Pleiotrophin enhances clonal growth and long-term expansion of human embryonic stem cells.

To identify additional growth factors for optimizing propagation of human embryonic stem cells (hESCs), we mined publicly available data sets for the transcriptomes of murine and human ESCs and feeder cells, thereby generating a list of growth factors and complementary receptors. We identified the major pathways previously reported to be important, as well as several new ones. One pathway is the Pleiotrophin (PTN)-Pleiotrophin receptor (PTPRZ1) axis. Murine fibroblasts secrete Ptn, whereas hESCs expressed PTPRZ1, which is downregulated upon differentiation. Depletion of PTPRZ1 resulted in decreased colony formation and lower recovery of hESCs. Supplementation of chemically defined medium for feeder-free propagation of hESCs with PTN allowed higher recovery of hESCs without loss of pluripotency. PTN-PTPRZ1 functions here predominantly via an antiapoptotic effect mediated in part by the activation of Akt. These findings reveal the underlying importance of PTN in hESC survival and its usefulness in the clonal manipulation and large-scale propagation of hESCs. Disclosure of potential conflicts of interest is found at the end of this article.

Human embryonic stem cells.

Human embryonic stem cells (hESCs) are stable in terms of their pluripotency, karyotype, global gene expression, ability to repair DNA and maintain telomerase levels, and growth characteristics. hESCs offer a renewable source of a wide range of cell types for use in research and cell-based therapies to treat disease. Characterization of cell populations that differentiate from them provides important information on early differentiation events and critical data for subsequent downstream manipulations. A strategy that has evolved in using cells is to develop a master bank of cells from which a working bank is generated, which is then used to generate appropriate cell types for screening, drug discovery, or therapeutic use. Appropriate cells are purified or enriched by one of several selection techniques, and such purified populations are used for most purposes. In this review, the authors discuss recent results and review the progress that has been made in the field, with a focus on using embryonic stem cells for neural targets.

Fish scale-derived collagen patch promotes growth of blood and lymphatic vessels in vivo.

In this study, Type I collagen was extracted from fish scales asa potential alternative source of collagen for tissue engineering applications. Since unmodified collagen typically has poor mechanical and degradation stability both in vitro and in vivo, additional methylation modification and 1,4-butanediol diglycidyl ether (BDE) crosslinking steps were used to improve the physicochemical properties of fish scale-derived collagen. Subsequently, in vivo studies using a murine model demonstrated the biocompatibility of the different fish scale-derived collagen patches. In general, favorable integration of the collagen patches to the surrounding tissues, with good infiltration of cells, blood vessels (BVs) and lymphatic vessels (LVs) were observed under growth factor-free conditions. Interestingly, significantly higher (p<0.05) number of LVs was found to be more abundant around collagen patches with methylation modification and BDE crosslinking. Overall, we have demonstrated the potential application of fish scale-derived collagen as a promising scaffolding material for various biomedical applications. STATEMENT OF SIGNIFICANCE: Currently the most common sources of collagen are of bovine and porcine origins, although the industrial use of collagen obtained from non-mammalian species is growing in importance, particularly since they have a lower risk of disease transmission and are not subjected to any cultural or religious constraints. However, unmodified collagen typically has poor mechanical and degradation stability both in vitro and in vivo. Hence, in this study, Type I collagen was successfully extracted from fish scales and chemically modified and crosslinked. In vitro studies showed overall improvement in the physicochemical properties of the material, whilst in vivo implantation studies showed improvements in the growth of blood and lymphatic host vessels in the vicinity of the implants.

Supercritical carbon dioxide extracted extracellular matrix material from adipose tissue.

Adipose tissue is a rich source of extracellular matrix (ECM) material that can be isolated by delipidating and decellularizing the tissue. However, the current delipidation and decellularization methods either involve tedious and lengthy processes or require toxic chemicals, which may result in the elimination of vital proteins and growth factors found in the ECM. Hence, an alternative delipidation and decellularization method for adipose tissue was developed using supercritical carbon dioxide (SC-CO2) that eliminates the need of any harsh chemicals and also reduces the amount of processing time required. The resultant SC-CO2-treated ECM material showed an absence of nuclear content but the preservation of key proteins such as collagen Type I, collagen Type III, collagen Type IV, elastin, fibronectin and laminin. In addition, other biological factors such as glycosaminoglycans (GAGs) and growth factors such as basic fibroblast growth factor (bFGF) and vascular endothelial growth factor (VEGF) were also retained. Subsequently, the resulting SC-CO2-treated ECM material was used as a bioactive coating on tissue culture plastic (TCP). Four different cell types including adipose tissue-derived mesenchymal stem cells (ASCs), human umbilical vein endothelial cells (HUVECs), immortalized human keratinocyte (HaCaT) cells and human monocytic leukemia cells (THP-1) were used in this study to show that the SC-CO2-treated ECM coating can be potentially used for various biomedical applications. The SC-CO2-treated ECM material showed improved cell-material interactions for all cell types tested. In addition, in vitro scratch wound assay using HaCaT cells showed that the presence of SC-CO2-treated ECM material enhanced keratinocyte migration whilst the in vitro cellular studies using THP-1-derived macrophages showed that the SC-CO2-treated ECM material did not evoke pro-inflammatory responses from the THP-1-derived macrophages. Overall, this study shows the efficacy of SC-CO2 method for delipidation and decellularization of adipose tissue whilst retaining its ECM and its subsequent utilization as a bioactive surface coating material for soft tissue engineering, angiogenesis and wound healing applications.

Angiopoietin-like 4 induces a ß-catenin-mediated upregulation of ID3 in fibroblasts to reduce scar collagen expression.

In adult skin wounds, collagen expression rapidly re-establishes the skin barrier, although the resultant scar is aesthetically and functionally inferior to unwounded tissue. Although TGFß signaling and fibroblasts are known to be responsible for scar-associated collagen production, there are currently no prophylactic treatments for scar management. Fibroblasts in crosstalk with wound keratinocytes orchestrate collagen expression, although the precise paracrine pathways involved remain poorly understood. Herein, we showed that the matricellular protein, angiopoietin-like 4 (ANGPTL4), accelerated wound closure and reduced collagen expression in diabetic and ANGPTL4-knockout mice. Similar observations were made in wild-type rat wounds. Using human fibroblasts as a preclinical model for mechanistic studies, we systematically elucidated that ANGPTL4 binds to cadherin-11, releasing membrane-bound ß-catenin which translocate to the nucleus and transcriptionally upregulate the expression of Inhibitor of DNA-binding/differentiation protein 3 (ID3). ID3 interacts with scleraxis, a basic helix-loop-helix transcription factor, to inhibit scar-associated collagen types 1α2 and 3α1 production by fibroblasts. We also showed ANGPTL4 interaction with cadherin-11 in human scar tissue. Our findings highlight a central role for matricellular proteins such as ANGPTL4 in the attenuation of collagen expression and may have a broader implication for other fibrotic pathologies.

Co-culture of bone marrow fibroblasts and endothelial cells on modified polycaprolactone substrates for enhanced potentials in bone tissue engineering.

The creation of a vascularized bed makes the survival of seeded cells on 3-dimensional scaffolds much more likely. However, relying purely on random capillary ingrowth into the porous scaffolds from the host may compromise vascularization of a scaffold. One solution is to transplant cells capable of differentiating into new blood vessels into the scaffolds to accelerate the creation of a vascularized scaffold. Because endothelial cells are the key cells involved in blood vessel formation, the present study was designed to investigate the development of a biomaterial surface that supports endothelial cell attachment and proliferation. The subsequent effects of the material surface modifications on the differentiation and proliferation of human bone marrow-derived fibroblasts (HBMFs) when grown in co-culture with a human bone marrow endothelial cell line (HBMEC-60) were studied. Endothelialization studies showed that the gelatin-coated and hydroxyapatite-coated substrates were superior for HBMEC-60 attachment and proliferation to hydrolyzed-only or untreated polycaprolactone substrates. Co-culture studies showed that the presence of the HBMEC-60 specifically enhanced HBMF cell proliferation and differentiation and that this effect was not observed with co-culture with skin fibroblasts. It is concluded that the co-culture of endothelial cells with HBMFs could be a promising culture system for bone tissue- engineering applications.

Single-step synthesis of heparin-doped polypyrrole nanoparticles for delivery of angiogenic factor.

AIM: To perform one-pot synthesis of heparin-immobilized polypyrrole (PPy) nanoparticles and evaluate the use of these nanoparticles for the delivery of VEGF. MATERIALS & METHODS: Heparin-stabilized synthesis of PPy nanoparticles was performed via oxidative polymerization. VEGF-bound PPy-heparin nanoparticles were delivered to endothelial cells and bioactivity of VEGF was assessed by Matrigel tube formation. RESULTS: Size-controllable synthesis of heparin-doped PPy nanoparticles was achieved, and heparin promoted the conjugation of VEGF. Angiogenic activity of the VEGF-conjugated PPy nanoparticles was verified. CONCLUSION: Heparin-doped PPy nanoparticles can be synthesized using one-pot reaction and provide a delivery platform by which VEGF can be conjugated onto.

Cell-secreted extracellular matrix formation and differentiation of adipose-derived stem cells in 3D alginate scaffolds with tunable properties.

Three dimensional (3D) alginate scaffolds with tunable mechanical and structural properties are explored for investigating the effect of the scaffold properties on stem cell behavior and extracellular matrix (ECM) formation. Varying concentrations of crosslinker (20 - 60%) are used to tune the stiffness, porosity, and the pore sizes of the scaffolds post-fabrication. Enhanced cell proliferation and adipogenesis occur in scaffolds with 3.52 ± 0.59 kPa stiffness, 87.54 ± 18.33% porosity and 68.33 ± 0.88 µm pore size. On the other hand, cells in scaffolds with stiffness greater than 11.61 ± 1.74 kPa, porosity less than 71.98 ± 6.25%, and pore size less than 64.15 ± 4.34 µm preferentially undergo osteogenesis. When cultured in differentiation media, adipose-derived stem cells (ASCs) undergoing terminal adipogenesis in 20% firming buffer (FB) scaffolds and osteogenesis in 40% and 60% FB scaffolds show the highest secretion of collagen as compared to other groups of scaffolds. Overall, this study demonstrates the three-way relationship between 3D scaffolds, ECM composition, and stem cell differentiation.

A Periosteum-Inspired 3D Hydrogel-Bioceramic Composite for Enhanced Bone Regeneration .

A 3D injectable hydrogel-bioceramic composite consisting of gelatin-3-(4-hydroxyphenyl) propionic acid (Gtn-HPA) and carboxymethyl cellulose-tyramine (CMC-Tyr), incorporated with fish scale-derived calcium phosphate (CaP), is developed for bone applications. The hydrogel-bioceramic composite has significantly improved the elastic modulus compared to the non-filled hydrogel, of which the addition of 10 w/v% CaP showed zero order fluorescein isothiocyanate (FITC)-dextran release profile and a significantly higher proliferation rate of encapsulated cells. All the samples promote the nucleation and growth of CaP minerals when exposed to 1× SBF. Overall, the hydrogel-bioceramic composite with 10 w/v% CaP can potentially be used as a periosteum-mimicking membrane to facilitate bone regeneration.