Phototaxis Flight of Microdroplets in a Laser.

Phototaxis phenomenon is fundamental and critical for optical manipulation of micro-objects. Here, we report the size-dependent negative or positive phototaxis behaviors for microdroplets containing interfacial energy absorber flying in a laser. The critical diameters for such negative-to-positive turnover are studied through both experiments and simulation with different liquids and absorbers, which establishes the mechanism and reveals the role of both the liquid and the absorber inside the microdroplets. This study offers new insight for the manipulation of the phototaxis behavior of micro-objects, showing potential applications in optical trapping and transporting systems that involve light-microdroplet interactions.

A Graphene Quantum Dot Film with a Nanoengineered Crack-Like Surface via Bubble-Induced Self-Assembly for High-Power Thermal Energy Management Applications.

Films with micro/nanostructures that show high wicking performance are promising in water desalination, atmospheric water harvesting, and thermal energy management systems. Here, we use a facile bubble-induced self-assembly method to directly generate films with a nanoengineered crack-like surface on the substrate during bubble growth when self-dispersible graphene quantum dot (GQD) nanofluid is used as the working medium. The crack-like micro/nanostructure, which is generated due to the thermal stress, enables the GQD film to not only have superior capillary wicking performance but also provide many additional nucleation sites. The film demonstrates enhanced phase change-based heat transfer performance, with a simultaneous enhancement of the critical heat flux and heat transfer coefficient up to 169% and 135% over a smooth substrate, respectively. Additionally, the GQD film with high stability enables a performance improvement in the concentration ratio and electrical efficiency of concentrated photovoltaics in an analytical study, which is promising for high-power thermal energy management applications.

Selective Synthesis of Single-Handed Helical Polymers from Achiral Monomer and a Mechanism Study on Helix-Sense-Selective Polymerization.

Inspired by the exquisite helices in Nature, fabrication of helical materials with controlled handedness has attracted considerable attention. Herein, we report on precis synthesis of single left- and right-handed helical polyisocyanides through living polymerization of achiral monomers using chiral palladium catalysts under helix-sense-selective manner. Mechanism study revealed that the yielded helices with opposite handedness showed different activity of the living chain end. The helix with unfavored handedness was self-terminated, while the one with favored handedness showed high activity and could undergo chain propagation to form a high molecular weight polymer with maintained single-handed helicity.

Octopus-like Microstructure of Graphene Oxide Generated through Laser-Microdroplet Interaction for Adhesive Coating.

The octopus, as one of the most famous celebrities in bionics, has provided various inspirations for camouflage materials, soft-bodied robots, and flexible grabbers. The miniaturization of such structures will help the development of microrobots, microdelivery of drugs, and surface coating. With the lack of relevant effective preparation approaches, however, the generation of such octopus-like structures with a size of ∼1 µm or below is challenging. Here, we develop an approach based on laser-microdroplet interaction for generating an octopus-like structure with a size of ∼1 µm. The developed approach uses laser-microdroplet interaction to provide a large driving force of ∼107 Pa at a confined space (<1 µm), locally crumpling the precursor in the microdroplet. The locally crumpled particles possess both crumpled and uncrumpled structures that resemble an octopus's head and soft body. In the adhesion test, the octopus-like particles exhibit high adhesive properties in air, in water, and on a flexible substrate. In the electrochemical test, the octopus-like particles on flexible electrodes show good electrochemical and adhesive properties under hundreds of bending cycles. Benefiting from the combination of crumpled and uncrumpled morphologies, the created particles with octopus-like microstructure are demonstrated to possess comprehensive performance, exhibiting wide application potentials in the fields of microswimmers, surface coatings, and electrochemistry. Additionally, the method developed in this work has the advantages of concentrated energy in a confined space, displaying prospective potentials in micro- and nanoprocessing.

Facile Synthesis of Optically Active and Thermoresponsive Star Block Copolymers Carrying Helical Polyisocyanide Arms and Their Thermo-Triggered Chiral Resolution Ability.

A left-handed helical poly(phenyl isocyanide) bearing a norbornene unit and a Pd(II) complex on each terminus was prepared. The norbornene terminus was core cross-linked with a bisnorbornene linker via ring-opening metathesis polymerization (ROMP), yielding a star polymer carrying left-handed helical arms decorated with Pd(II) units at the exterior. The optical activities of the helical arms were maintained after the cross-linking reaction. The Pd(II) units on the surface of the star polymer were chain extended with a new phenyl isocyanide bearing three hydrophilic triethylene glycol monomethyl chains, which afforded an amphiphilic star block copolymer carrying helical arms. Such a star block copolymer showed excellent thermoresponsiveness with the lower critical solution temperature (LCST) around 55 °C. This optically active and thermoresponsive star polymer can enantioselectively capture the S-enantiomer of racemic methyl benzyl alcohol solution at a temperature lower than the LCST and precipitated when the temperature was higher than the LCST, leaving the R-enantiomer in the solution. The enantiomeric excess (ee) of the isolated enantiomer is up to 75%.

[Luminescence properties of Pr(3+) and energy transfer characteristics of Pr(3+)-->Gd(3+) in CaSiO3].

The excitation spectrum and the emission spectrum of Pr3+ in CaSiO3 under the room temperature were studied. The emission spectrum was constituted of three emission bands, corresponding to the emissions of the lowest 4f5d states to the 3H4, 3H6, 1G4 of the 4f2 states. The emission of the 3P0 and 1D2 were not observed. The concentration quenching of Pr3+ was due to the radiative and nonradiative energy transfer. There was energy transfer from Pr3+ to Gd3+, with the transfer rate of 10% of the Pr3+ emission rate.

Anion Binding Properties of Alkynylplatinum(II) Complexes with Amide-Functionalized Terpyridine: Host-Guest Interactions and Fluoride Ion-Induced Deprotonation.

Molecular sensors able to detect ions are of interest due to their potential application in areas such as pollutant sequestration. Alkynylplatinum(II) terpyridine complexes with an amide-based receptor moiety have been synthesized and characterized. Their anion binding properties based on host-guest interactions have been examined with the use of UV-vis absorption and emission spectral titration studies. Spectral changes were observed for both complexes upon the addition of spherical and nonspherical anions. Their titration profiles were shown to be in good agreement with theoretical results predicting a 1:1 binding model, and the binding constants were determined from the experimental data. Drastic color changes from yellow to orange-red were observed for one of the complexes upon titration with fluoride (F(-)) ion in acetone. These changes were ascribed to the deprotonation of the amide functionalities induced by F(-) ion, and this was confirmed by the restoration of spectral changes upon addition of trifluoroacetic acid to the F(-) ion-complex mixture as well as by electrospray ionization mass spectrometry (ESI-MS) data.

Synthesis, structure, photophysics, electrochemistry, and ion-binding studies of ruthenium(II) 1,10-phenanthroline complexes containing thia-, selena-, and aza-crown pendants.

A series of ruthenium(II) diimine complexes containing thia-, selena- and aza-crowns derived from 1,10-phenanthroline have been synthesized and characterized, and their photophysics and electrochemistry were studied. Their interaction with metal ions was investigated by UV-vis, luminescence, and 1H NMR spectroscopy. The crystal structures of [Ru(bpy)2(L1)](PF6)2, [Ru(bpy)2(L2)](ClO4)2, [Ru(bpy)2(L3)](ClO4)2, and [Ru(bpy)2(L4)](ClO4)2 have been determined. The luminescence properties of [Ru(bpy)2(L1)](ClO4)2 were found to be sensitive and selective toward the presence of Hg2+ ions in an acetonitrile solution. The addition of alkaline-earth metal ions, Zn2+, Cd2+, and Hg2+ ions, to the solution of [Ru(bpy)2(L6)](ClO4)2 in acetonitrile gave rise to large changes in the UV-vis and emission spectra. The binding of metal ions to [Ru(bpy)2(L6)](ClO4)2 was found to cause a strong enhancement in the emission intensities of the complex, with high specificity toward Hg2+ ions.

Sensitive single-layered oxygen-sensing systems: polypyridyl ruthenium(II) complexes covalently attached or deposited as langmuir-blodgett monolayer on glass surfaces.

Oxygen-sensing elements containing single-layered structures of luminescent indicators of ruthenium(II) bipyridyl complexes on glass surfaces prepared by covalent attachment and LB deposition are described. They are capable of detecting gaseous oxygen concentration by luminescence quenching of the indicator with reproducible and large quenching efficiencies that are comparable to the best quenching efficiencies obtained by other ruthenium(II) polypyridine based complexes immobilized in matrixes. The large quenching efficiencies for both films imply that the probe complexes are effectively quenched by oxygen, which is probably due to the thin single-layered structures with large surface-to-area ratio and short distance between the probe complexes and oxygen.

Synthesis, characterization, spectroscopic, and electrochemiluminescence properties of a solvatochromic azacrown-containing cyanoruthenate(II): potential applications in separation and indirect photometric detection of cations and amino acids in HPLC.

A new anionic ruthenium(II) complex, (Et4N)[Ru(tpyA18C6)(CN)3] (tpyA18C6=N-[4'-(2,2':6',2''-terpyridyl)]-1,4,7,10,13-pentaoxa-16-azacyclohexadodecane), has been synthesized and characterized. The complex was found to show pronounced solvatochromic behavior and, when dissolved in solution, changed its color from purple to yellow when the solvent system was varied from pure acetonitrile to pure water. Its absorption and emission energies in various solvents showed a linear dependence of the Gutman's acceptor number. The characteristic photoluminescence and electrochemiluminescence (ECL) of the complex were also found to be progressively quenched as the proportion of water in a water/acetonitrile mixture increased. Large changes in the chemical shifts of the 1H NMR and 13C NMR signals of [Ru(tpyA18C6)(CN)3]- in different solvents were observed. The complex has also been demonstrated to serve as a mobile-phase additive in high-performance liquid chromatography for separation of metal cations and amino acids. Comparison studies with the crown-free analogue, (Et4N)[Ru(tpy)(CN)3] (tpy = 2,2':6',2''-terpyridine), showed that other than the ion-pair effect, the allosteric host-guest interaction provided by the presence of the pendant crown was essential to the separation performance of the complex. Indirect detection of nonabsorbing analytes has been achieved by monitoring the absorbance changes of the eluent at the metal-to-ligand charge-transfer (MLCT) absorption band maximum of the complex at 445 nm. The effects of pH, ionic strength, and polarity of the mobile phase as well as the complex concentration on the selectivity and resolution have also been studied.

Novel luminescent hexanuclear platinum(II) alkynyl complex: molecular lego from a face-to-face dinuclear platinum(II) building block.

A novel luminescent hexanuclear platinum(II) complex, [Pt(2)(mu-dppm)(2)(C[triple bond]CC(5)H(4)N)(4)[Pt(trpy)](4)](CF(3)SO(3))(8) (trpy = 2,2':6',2''-terpyridine), was successfully synthesized by using the face-to-face dinuclear platinum(II) ethynylpyridine complex [Pt(2)(mu-dppm)(2)(C[triple bond]CC(5)H(4)N)(4)] as the building block.