RESUMEN
Real-time polymerase chain reaction (PCR) for SARS-CoV-2 is the mainstay of COVID-19 diagnosis, yet there are conflicting reports on its diagnostic performance. Wide ranges of false-negative PCR tests have been reported depending on clinical presentation, the timing of testing, specimens tested, testing method, and reference standard used. We aimed to estimate the frequency of discordance between initial nasopharyngeal (NP) PCR and repeat NP sampling PCR and serology in acutely ill patients admitted to the hospital. Panel diagnosis of COVID-19 infection is further utilized in discordance analysis. Included in the study were 160 patients initially tested by NP PCR with repeat NP sampling PCR and/or serology performed. The percent agreement between initial and repeat PCR was 96.7%, while the percent agreement between initial PCR and serology was 98.9%. There were 5 (3.1%) cases with discordance on repeat testing. After discordance analysis, 2 (1.4%) true cases tested negative on initial PCR. Using available diagnostic methods, discordance on repeat NP sampling PCR and/or serology is a rare occurrence.
Asunto(s)
COVID-19/diagnóstico , COVID-19/virología , Nasofaringe/virología , SARS-CoV-2/genética , Adulto , Prueba de COVID-19/métodos , Femenino , Humanos , Masculino , Reacción en Cadena en Tiempo Real de la Polimerasa/métodos , Estándares de Referencia , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa/métodos , Sensibilidad y Especificidad , Manejo de Especímenes/métodosRESUMEN
Oxidative addition and reductive elimination are key steps in a wide variety of catalytic reactions mediated by transition-metal complexes. Historically, this reactivity has been considered to be the exclusive domain of d-block elements. However, this paradigm has changed in recent years with the demonstration of transition-metal-like reactivity by main-group compounds. This Review highlights the substantial progress achieved in the past decade for the activation of robust single bonds by main-group compounds and the more recently realized activation of multiple bonds by these elements. We also discuss the significant discovery of reversible activation of single bonds and distinct examples of reductive elimination at main-group element centers. The review consists of three major parts, starting with oxidative addition of single bonds, proceeding to cleavage of multiple bonds, and culminated by the discussion of reversible bond activation and reductive elimination. Within each subsection, the discussion is arranged according to the type of bond being cleaved or formed and considers elements from the left to the right of each period and down each group of the periodic table. The majority of results discussed in this Review come from the past decade; however, earlier reports are also included to ensure completeness.
RESUMEN
Reaction of the cyclic guanidine TolNâSIMe with the aluminum(I) compound NacNacAl (1) results in the unprecedented cleavage of the C-N multiple bond to give, after rearrangement, the carbene-ligated Al(III) amide, NacNac'Al(NHTol)(SIMe) (6). DFT calculations revealed that these reactions proceed via a bimolecular mechanism in which either the basic Al(I) center or the transient AlâNTol species deprotonates the methyl group of the NacNac ligand.
RESUMEN
The reaction of cyclic urea 1,3-dimethyl-2-imidazolidinone with the aluminum(I) compound NacNacAl (1) gives an unexpected adduct of urea with the isomerized aluminum(III) hydride NacNac'AlH(OâSIMe) (3). A related reaction of 1 with phosphine oxides results in cleavage of the PâO bond and formation of hydroxyl derivatives NacNac'Al(OH)(OâPR3) [R = Ph (5) and Et (6)]. Density functional theory calculations revealed that these reactions proceed via a bimolecular mechanism in which either the basic aluminum(I) center or the transient AlâO species deprotonate the methyl group of the NacNac ligand.
RESUMEN
The aluminum(I) compound NacNacAl (1) reacts with diphenyl disulfide and diethyl sulfide to form the respective four-coordinate bis(phenyl sulfide) complex NacNacAl(SPh)2 (2) and alkyl thiolate aluminum complex NacNacAlEt(SEt) (3). As well, reaction of 1 with tetraphenyl diphosphine furnishes the bis(diphenyl phosphido) complex NacNacAl(PPh2)2 (4). Production of 3 and 4 are the first examples of C(sp(3))-S and R2P-PR2 activation by a main-group element complex. All three complexes were characterized by multinuclear NMR spectroscopy and X-ray crystal structure analysis. Furthermore, a variable-temperature NMR spectroscopic study was undertaken on 4 to study its dynamic behavior in solution.
RESUMEN
The treatment of cyclic thioureas with the aluminum(I) compound NacNacAl (1; NacNac=[ArNC(Me)CHC(Me)NAr]- , Ar=2,6-Pri2 C6 H3 ) resulted in oxidative cleavage of the C=S bond and the formation of 3 and 5, the first monomeric aluminum complexes with an Al=S double bond stabilized by N-heterocyclic carbenes. Compound 1 also reacted with triphenylphosphine sulfide in a similar manner, which resulted in cleavage of the P=S bond and production of the adduct [NacNacAl=S(S=PPh3 )] (8). The Al=S double bond in 3 can react with phenyl isothiocyanate to furnish the cycloaddition product 9 and zwitterion 10 as a result of coupling between the liberated carbene and PhN=C=S. All novel complexes were characterized by multinuclear NMR spectroscopy, and the structures of 5, 9, and 10 were confirmed by X-ray diffraction analysis. The nature of the Al=S bond in 5 was also probed by DFT calculations.
RESUMEN
The Al(I) compound NacNacAl (1, NacNac = [ArNC(Me)CHC(Me)NAr](-) and Ar = 2,6-Pr(i)2C6H3) reacts with H-X (X = H, Si, B, Al, C, N, P, O) σ bonds of H2, silanes, borane (HBpin, pin = pinacolate), allane (NacNacAlH2), phosphine (HPPh2), amines, alcohol (Pr(i)OH), and Cp*H (Cp* = pentamethylcyclopentadiene) to give a series of hydride derivatives of the four-coordinate aluminum NacNacAlH(X), which are characterized herein by spectroscopic methods (NMR and IR) and X-ray diffraction. This method allows for the syntheses of the first boryl hydride of aluminum and novel silyl hydride and phosphido hydride derivatives. In the case of the addition of NacNacAlH2, the reaction is reversible, proving the possibility of reductive elimination from the species NacNacAlH(X).
RESUMEN
Reduction of the cationic Ge(II) complex [dimpyrGeCl][GeCl3] (dimpyr=2,6-(ArN=CMe)2NC5H3, Ar=2,6-iPr2C6H3) with potassium graphite in benzene affords an air sensitive, dark green compound of Ge(0), [dimpyrGe], which is stabilized by a bis(imino)pyridine platform. This compound is the first example of a complex of a zero-valent Groupâ 14 element that does not contain a carbene or carbenoid ligand. This species has a singlet ground state. DFT studies revealed partial delocalization of one of the Ge lone pairs over the π*(C=N) orbitals of the imines. This delocalization results in a partial multiple-bond character between the Ge atom and imine nitrogen atoms, a fact supported by the X-ray crystallography and IR spectroscopy data.
RESUMEN
The quantification of cannabinoids is an essential part of cannabis profiling and testing, whether for medical or recreational use. As regulatory bodies continue to increase testing requirements for these products, it is crucial that alternative and effective analytical methods be developed. Herein, we describe the use of benchtop NMR instruments for the quantification of Δ9-tetrahydrocannabinol (THC) and cannabidiol (CBD) in a variety of cannabis concentrates and compare the values to those obtained using HPLC, the most common approach for the quantification of cannabinoids. Based on the discrepancies observed in test values from different laboratories using only HPLC, the value of orthogonal testing methods has been identified and is increasingly desired.
Asunto(s)
Cannabidiol , Cannabinoides , Cannabis , Cannabidiol/análisis , Cannabinoides/análisis , Cromatografía Líquida de Alta Presión , Dronabinol/análisisRESUMEN
The use of nickel complexes utilizing non-innocent ligands based on picolinamide to function as redox carriers in flow batteries was explored. The picolinamide moiety was linked together with -CH2 CH2 - (bpen), -CH2 CH2 CH2 - (bppn), and -C6 H4 - (bpb) moieties, resulting in two, three, and four quasi-reversible waves, respectively, for the nickel complexes and >3â V difference between the outermost positive and negative waves. The redox events were theoretically modelled for each complex, showing excellent agreement (<0.3â V difference) between the experimental and modelled potentials. Bulk cycling of the most soluble complex, Ni(bppn), indicated only one of the three waves was reversible. Therefore, Ni(bppn) has the ability to act as a negative charge redox carrier in flow cells.
RESUMEN
Redox flow batteries (RFBs) have recently been recognized as a potentially viable technology for scalable energy storage. To take full advantage of RFBs, one possible approach for achieving high energy densities is to maximize a number of redox events by utilizing charge carriers capable of multiple one-electron transfers within the electrochemical window of solvent. However, past efforts to develop more efficient electrolytes for nonaqueous RFBs have mostly been empirical. In this manuscript, we shed light on design principles by theoretically investigating the effects of systematically substituting pyridyl moieties with imine ligands within a series of Fe complexes with some experimental validation. We found that such replacement is an effective strategy for reducing the molecular weight-to-charge ratios of these complexes. Simultaneously, calculations suggest that the reduction potentials and ligand-based redox activity of such substituted N-heterocyclic Fe compounds might be maintained within their +4 â -1 charge states. Additionally, by theoretically examining the role of coordination geometry, vis-à-vis reducing the number of redox noninnocent ligands within the first coordination sphere, we have demonstrated that Fe complexes with one such ligand were also capable of supporting multielectron reduction events and exhibited reduction potentials similar to their parent analogs supported by two or three of the same multidentate ligands. However, some differences in redox nature within the lower (+2 â -1) charge states were also noticed. Specifically, complexes containing two bidentate ligands, or one tridentate ligand, exhibited ligand-based reductions, whereas compounds with one bidentate ligand exhibited metal-centered reductions. The current results pave the way toward the design of the next-generation of Fe complexes with lower molecular weights and greater stored energy for redox flow batteries.
RESUMEN
Stepwise reduction of the diiminopyridine (dimpyr) complex, dimpyrZnCl2, by KC8 leads to molecular zinc compounds dimpyrZnCl (2) and dimpyrZnCl(DMAP) (3, DMAP = 4-dimethylaminopyridine), which were characterized by X-ray diffraction and EPR spectroscopy. Compound 2 shows an unusual nearly square planar geometry of the zinc atom equally ligated by two imine groups. X-ray crystallographic and EPR data suggest significant delocalization of the zinc 4p electron onto the non-innocent dimpyr ligand. The chloride in 2 can also be substituted by a methyl group upon addition of methyl lithium to generate compound 4, dimpyrZnMe. The novel alkylzinc compound displayed approximate square planar geometry around the zinc centre and significant delocalization of electron density onto the dimpyr ligand, as revealed by X-ray crystallographic studies and EPR spectroscopy, akin to 2. Further reduction of 3 leads to compound 5, dimpyrZn(DMAP)2. X-ray diffraction study of 5 revealed an unprecedented see-saw geometry around the four-coordinate zinc center with significant electron density transfer to the dimpyr ligand, supported by DFT calculations.
RESUMEN
A rigid NSN-donor proligand, 4,5-bis(2,6-diisopropylanilino)-2,7-di-tert-butyl-9,9-dimethylthioxanthene (H(2)[TXA(2)], 1) was prepared by palladium-catalyzed coupling of 2,6-diisopropylaniline with 4,5-dibromo-2,7-di-tert-butyl-9,9-dimethylthioxanthene. Deprotonation of 1 using (n)BuLi provided Li(2)(DME)(2)[TXA(2)] (2), and subsequent reaction with UCl(4) afforded [Li(DME)(3)][(TXA(2))UCl(3)] (4). The analogous NON-donor ligated complex [(XA(2))UCl(3)K(DME)(3)] [3; XA(2) = 4,5-bis(2,6-diisopropylanilino)-2,7-di-tert-butyl-9,9-dimethylxanthene] was prepared by the reaction of K(2)(DME)(x)[XA(2)] with UCl(4). A cyclic voltammogram (CV) of 3 in THF/[NBu(4)][B(C(6)F(5))(4)] at 200 mV s(-1) showed an irreversible reduction to uranium(III) at E(pc) = -2.46 V versus FeCp(2)(0/+1), followed by a product wave at E(1/2) = -1.83 V. Complex 4 also underwent irreversible reduction to uranium(iii) [E(pc) = -2.56 V], resulting in an irreversible product peak at E(pa) = -1.83 V. One-electron reduction of complexes 3 and 4 using K(naphthalenide) under an argon atmosphere in DME yielded 6-coordinate [(XA(2))UCl(DME)] (5) and the thermally unstable 7-coordinate [(TXA(2))U(DME)Cl(2)Li(DME)(2)] (6), respectively. The U-S distances in 4 and 6 are uncommonly short, the C-S-U angles are unusually acute, and the thioxanthene backbone of the TXA(2) ligand is significantly bent. By contrast, the xanthene backbone in XA(2) complexes 3 and 5 is planar. However, κ(3)-coordination and an approximately meridional arrangement of the ancillary ligand donor atoms is maintained in all complexes. DFT and Atoms in Molecules (AIM) calculations were carried out on 3, 4, 5, 6, [(XA(2))UCl(3)](-) (3B), [(TXA(2))UCl(2)(DME)](-) (6B) and [(TXA(2))UCl(DME)] (6C) to probe the extent of covalency in U-SAr(2) bonding relative to U-OAr(2) bonding.
RESUMEN
Polyanions based on poly(methyl vinyl ether-alt-maleic acid) were investigated as materials for cell encapsulation. These water-soluble polyanions having molecular masses ranging from 20 to 1980 kDa were prepared by functionalization of poly(methyl vinyl ether-alt-maleic anhydride) with 5-aminofluorescein and/or α-methoxy-ω-amino-poly(ethylene glycol), followed by base hydrolysis of the residual anhydride groups to form the corresponding poly(methyl vinyl ether-alt-sodium maleate). Their potential to replace alginate both in the core and, in particular, the outer shell of calcium alginate-poly(L-lysine)-alginate (APA) capsules was determined using confocal fluorescence microscopy, osmotic pressure tests, permeability studies, protein binding and cell viability assays. These polymers were shown to be able to replace the outer layer of alginate, forming more resilient capsule shells. The resulting capsules showed similar permeability and resistance to bovine serum albumin binding, as well as superior viability for encapsulated cells, when compared to standard APA capsules. In addition, these polymers showed promise for use as functional additives to the capsule cores.