Strongly Polarized π-Extended 1,4-Dihydropyrrolo[3,2-b]pyrroles Fused with Tetrazolo[1,5-a]quinolines.

A straightforward route to 1,4-dihydropyrrolo[3,2-b]pyrroles comprised of two electron-withdrawing quinoline or tetrazolo[1,5-a]quinoline scaffolds has been developed. The versatile multicomponent reaction affording 1,4-dihydropyrrolo[3,2-b]pyrroles combined with intramolecular direct arylation enables assembly of these products in just three steps from anilines with overall yields exceeding 30%. The planarized, ladder-type heteroacenes possess up to 14 conjugated rings. These nominally quadrupolar materials exhibit efficient fluorescence with wavelengths spanning most of the visible spectrum from green-yellow for the dyes possessing biaryl bridges and orange-red for the fully fused systems. In many cases, the fluorescence quantum yields are large, the solvatofluorochromic effects are strong, and the fluorescence is maintained even in crystalline state. Analysis of the electronic structure of these molecular architectures using quantum chemical methods suggests that the character and position of the flanking heterocycle determine the shape of HOMO and LUMO and their extension to N-aryl substituents, influencing the values of molar absorption coefficient. An experimental study of the two-photon absorption (2PA) properties has revealed that it occurs in the 700-800 nm range with apparent deviation from the Laporte parity selection rule, which may be attributed to Hertzberg-Teller contribution to vibronically allowed 2PA transition.

Gold-Catalyzed 1,2-Aryl Shift and Double Alkyne Benzannulation.

The tandem intramolecular hydroarylation of alkynes accompanied by a 1,2-aryl shift is described. Harnessing the unique electron-rich character of 1,4-dihydropyrrolo[3,2-b]pyrrole scaffold, we demonstrate that the hydroarylation of alkynes proceeds at the already occupied positions 2 and 5 leading to a 1,2-aryl shift. Remarkably, the reaction proceeds only in the presence of cationic gold catalyst, and it leads to heretofore unknown π-expanded, centrosymmetric pyrrolo[3,2-b]pyrroles. The utility is verified in the preparation of 13 products that bear six conjugated rings. The observed compatibility with various functional groups allows for increased tunability with regard to the photophysical properties as well as providing sites for further functionalization. Computational studies of the reaction mechanism revealed that the formation of the six-membered rings accompanied with a 1,2-aryl shift is both kinetically and thermodynamically favourable over plausible formation of products containing 7-membered rings. Steady-state UV/Visible spectroscopy reveals that upon photoexcitation, the prepared S-shaped N-doped nanographenes undergo mostly radiative relaxation leading to large fluorescence quantum yields. Their optical properties are rationalized through time-dependent density functional theory calculations. We anticipate that this chemistry will empower the creation of new materials with various functionalities.

Effect of Diamine Bridge on Reactivity of Tetradentate ONNO Nickel(II) Complexes.

Two new square planar ONNO nickel(II) complexes C2_core and C3_core have been synthesized and characterized by single crystal X-ray diffraction, NMR spectroscopy, thermogravimetry, and DFT calculations. The experimental results revealed the effect of the length of diamine bridge in the ligand on the behavior of the studied complexes in the reaction with N-heterocyclic aromatic amines, while DFT calculations provided a basis for the rationalization of this observation. The complex with propylenediamine bridge (C3_core) readily reacts with pyridine and its derivatives to form high-spin (paramagnetic) complexes with octahedral geometry as characterized by X-ray diffraction; electron-donating substituents on the pyridine ring facilitate the coordination of axial ligands. In contrast, the complex with ethylenediamine bridge (C2_core) does not undergo such a reaction because of the high deformation energy of the core required for the formation of C2_Py complex.

Bowl-Shaped Pentagon- and Heptagon-Embedded Nanographene Containing a Central Pyrrolo[3,2-b]pyrrole Core.

A bowl-shaped nitrogen-doped nanographene composed of a pyrrolo[3,2-b]pyrrole core substituted with six arene rings circularly bonded with one another has been prepared via a concise synthetic strategy encompassing the multicomponent tetraarylpyrrolopyrrole (TAPP) synthesis, the Scholl reaction, and intramolecular direct arylation. This synthesis represents the first case of programmed sequential intramolecular direct arylation reactions utilizing the different reactivity of C-Br and C-Cl bonds. The target compound contains two central pentagons confined between two adjacent heptagons-the inverse Stone-Thrower-Wales topology. The presence of both five- and seven-membered rings in the final structure is responsible for interesting properties such as a perpendicularly aligned dipole moment, absorption and fluorescence in the orange-red region, weak emission originating from the charge-transfer character of a low-energy absorption band, and a high lying HOMO. In the solid state slipped convex-to-convex π-π stacking dominates.

Covalently Linked Bis(Amido-Corroles): Inter- and Intramolecular Hydrogen-Bond-Driven Supramolecular Assembly.

Four bis-corroles linked by diamide bridges were synthesized through peptide-type coupling of a trans-A2 B-corrole acid with aliphatic and aromatic diamines. In the solid state, the hydrogen-bond pattern in these bis-corroles is strongly affected by the type of solvent used in the crystallization process. Although intramolecular hydrogen bonds play a decisive role, they are supported by intermolecular hydrogen bonds and weak N-H⋅⋅⋅π interactions between molecules of toluene and the corrole cores. In an analogy to mono(amido-corroles), both in crystalline state and in solutions, the aliphatic or aromatic bridge is located directly above the corrole ring. When either ethylenediamine or 2,3-diaminonaphthalene are used as linkers, incorporation of polar solvents into the crystalline lattice causes a roughly parallel orientation of the corrole rings. At the same time, both NHCO⋅⋅⋅NH corrole hydrogen bonds are intramolecular. In contrast, solvation in toluene causes a distortion with one of the hydrogen bonds being intermolecular. Interestingly, intramolecular hydrogen bonds are always formed between the -NHCO- functionality located further from the benzene ring present at the position 10-meso. In solution, the hydrogen-bonds pattern of the bis(amido-corroles) is strongly affected by the type of the solvent. Compared with toluene (strongly high-field shifted signals), DMSO and pyridine disrupt self-assembly, whereas hexafluoroisopropanol strengthens intramolecular hydrogen bonds.

Hydrogen Bonds Involving Cavity NH Protons Drives Supramolecular Oligomerization of Amido-Corroles.

trans-A2 B-Corroles with amide substituents at different positions versus the macrocyclic core have been synthesized. Their self-organizing properties have been comprehensively evaluated both in solid-state and in solution. The rigid arrangement of the amide functionality with the corrole ring led to the formation of strong intramolecular interactions and precluded intermolecular interactions. Replacement of sterically hindered C6 F5 substituents at positions 5 and 15 with smaller electron-withdrawing CO2 Me groups resulted in significant changes in the self-assembly pattern. With these substituents, tetramers formed in a crystalline state, in which one of the H-pyrrole subunits is out of the corrole plane. This allows the N-H group to form a hydrogen bond with a neighboring carbonyl group of the n-butyl amide fragment. DOSY NMR studies showed that amido-corroles bearing the OCH2 CONHnBu motif formed dimers in millimolar solutions in nonpolar solvents and the dimers existed in equilibrium with monomers. However, the corroles possessing meso-ester groups did not form dimers in polar tetrahydrofuran. Comprehensive optical studies allowed the absorption and emission features of the monomer corroles to be characterized in dilute solutions.

Complete Series of Alkali-Metal M(BH3NH2BH2NH2BH3) Hydrogen-Storage Salts Accessed via Metathesis in Organic Solvents.

We report a new efficient way of synthesizing high-purity hydrogen-rich M(BH3NH2BH2NH2BH3) salts (M = Li, Na, K, Rb, Cs). The solvent-mediated metathetic synthesis applied here uses precursors containing bulky organic cations and weakly coordinating anions. The applicability of this method permits the entire series of alkali-metal M(BH3NH2BH2NH2BH3) salts (M = Li, Na, K, Rb, Cs) to be obtained, thus enabling their comparative analysis in terms of crystal structures and hydrogen-storage properties. A novel polymorphic form of Verkade's base (C18H39N4PH)(BH3NH2BH2NH2BH3) precursor was also characterized structurally. For all compounds, we present a comprehensive structural, spectroscopic, and thermogravimetric characterization (PXRD, NMR, FTIR, Raman, and TGA/DSC/MS).

Cyclic π-electron delocalization in non-planar linear acenes.

Based on the experimental data of newly determined structures of per-substituted naphthalenes by halogen atoms (F, Cl and Br) and perchloroanthracene, as well as on the molecular modeling we have shown that deviation from planarity leads to relatively small changes in the cyclic π-electron delocalization of acenes. Per-substituted naphthalenes are twisted, whereas perchloroanthracene adopts a boat conformation in the solid state. For the most distorted case - perbromonaphthalene twisted by 34.7°, the geometry-based HOMA index drops down by 0.128 of the unit only, which means ca. 15% reduction of the extent of π-electron delocalization as referred to naphthalene. To account for the changes in the aromatic stabilization energies (ASEs), exaltation of magnetic susceptibilities (Λ) and strain energies (SEs) upon bending we have proposed a set of homodesmotic reactions based on the peri-substituted systems, where the reference compounds have similar conformation to the distorted aromatics. The decrease of aromaticity is smooth, but regular in a rather large range of distortion. Notably, the most extreme case - 1,4,5,8-tetra-t-butylnaphthalene, twisted by 51.7° with an estimated strain energy of 26 kcal mol(-1) - is still aromatic. The ASE, Λ and HOMA decrease by 19.1 kcal mol(-1), 7 cgs-ppm and 0.34 of the unit, respectively, as referred to naphthalene.

Towards Clathrates: Frozen States of Hydration of tert-Butylamine.

The dilution of tert-butylamine (tBA) with water and subsequent cooling leads to a large series of different crystalline hydrates by an in situ IR laser melting-zone procedure. The crystal structures were determined for tBA⋅n H2 O, with n=0, 1/4, 1, 7 1/4, 7 3/4, 9 3/4, 11, and 17. For the two lower hydrates (n= 1/4, 1), one- and two-dimensional hydrogen-bonded networks are formed, respectively. The higher hydrates (n>1) exhibit a clathrate-like three-dimensional water framework with the tBA molecules as part of, or sitting inside, the cages. In all cases, tBA is hydrogen-bonded to the H2 O framework. In the intermediate range (1

Chromane helicity rule--scope and challenges based on an ECD study of various trolox derivatives.

The validity of the chromane helicity rule correlating the sense of twist within the dihydropyran ring with the CD sign of the (1)Lb band observed at ca. 290 nm in their electronic circular dichroism (ECD) spectra is examined using a set of natural (S)-trolox derivatives. To investigate both the scope and the limitations of the rule a combination of ECD spectroscopy, especially the temperature dependence of the ECD spectra, single crystal X-ray diffraction analyses, and density functional theory (DFT) calculations was used. A thorough conformational analysis supported by the X-ray data led to the identification of predominant conformers. Then, a comparison of the experimental ECD spectra with the spectra simulated by TDDFT calculations allowed for a reasonable interpretation of the accumulated data. The results clearly indicated that to avoid the possibility of erroneous conclusions the chromane helicity rule should be used with great caution. This is likely related to the conformational flexibility of tested compounds by which conformers of different helicities can be produced. Therefore, based on the results presented here, it is strongly recommended that the conclusions derived from analysis of experimental data are supported with the appropriate theoretical computations.

Unidirectional molecular stacking of tribenzotriquinacenes in the solid state: a combined X-ray and theoretical study.

A combined X-ray diffraction and theoretical study of the solid-state molecular and crystal structures of tribenzotriquinacene (TBTQ, 2) and its centro-methyl derivative (3) is presented. The molecular structure of the parent hydrocarbon displays C3v symmetry and the three indane wings adopt mutually orthogonal orientations, similar to the case in its previously reported methyl derivative (3). Also similarly to the latter structure, the bowl-shaped molecules of compound 2 form infinite molecular stacks with perfectly axial, face-to-back (convex-concave) packing and with parallel and unidirectional orientation of the stacks. The experimentally determined intra-stack molecular distance is 4.75 Šfor compound 2 and 5.95 Šfor compound 3. Whereas the molecules of compound 2 show a slight alternating rotation (±6°) about the common axis of each stack, those of compound 3 show perfect translational symmetry within the stacks. We used dispersion-corrected density functional theory to compute the crystal structures of tribenzotriquinacenes 2 and 3. The London dispersion correction was crucial for obtaining an accurate description of the crystallization of both analyzed systems and the calculated results agreed excellently with the experimental measurements. We also obtained reasonable sublimation energies for both compounds. In addition, the geometries and dimerization energies of oligomeric stacks of compound 2 were computed and showed smooth convergence to the properties of the infinite polymeric stack.

Saddle-shaped aza-nanographene with multiple odd-membered rings.

A saddle-shaped aza-nanographene containing a central 1,4-dihydropyrrolo[3,2-b]pyrrole (DHPP) has been prepared via a rationally designed four-step synthetic pathway encompassing intramolecular direct arylation, the Scholl reaction, and finally photo-induced radical cyclization. The target non-alternant, nitrogen-embedded polycyclic aromatic hydrocarbon (PAH) incorporates two abutting pentagons between four adjacent heptagons forming unique 7-7-5-5-7-7 topology. Such a combination of odd-membered-ring defects entails a negative Gaussian curvature within its surface with a significant distortion from planarity (saddle height ≈ 4.3 Å). Its absorption and fluorescence maxima are located in the orange-red region, with weak emission originating from the intramolecular charge-transfer character of a low-energy absorption band. Cyclic voltammetry measurements revealed that this stable under ambient conditions aza-nanographene underwent three fully reversible oxidation steps (two one-electron followed by one two-electron) with an exceptionally low first oxidation potential of E ox1 = -0.38 V (vs. Fc/Fc+).

Imidazo[1,2-a]pyridines susceptible to excited state intramolecular proton transfer: one-pot synthesis via an Ortoleva-King reaction.

A short and efficient route to a broad range of imidazo[1,2-a]pyridines from 2-aminopyridines and acetophenones is achieved by a tandem, one-pot process starting with an Ortoleva-King reaction. Optimal conditions for the first step were established after examining various reaction parameters (solvent, reagent ratios, and temperature). The conditions identified (1st step, neat, 2.3 equiv of 2-aminopyridine, 1.20 equiv of I(2), 4 h, 110 °C; 2nd step, NaOH(aq), 1 h, 100 °C) resulted in the formation of imidazo[1,2-a]pyridines in 40-60% yields. The synthesis is compatible with various functionalities (OH, NMe(2), Br, OMe). Products containing a 2-(2'-hydroxyphenyl) substituent undergo excited state intramolecular proton transfer (ESIPT) in nonpolar and polar-aprotic solvents. Although ESIPT-type emission in nonpolar solvents is weak, the Stokes shifts are very high (11000 cm(-1)). The comparison of the properties of six ESIPT-capable imidazo[1,2-a]pyridines shows the influence of various substituents on emission characteristics. All of them also display strong, solid-state emission in blue-green-yellow region. 2-Aryl-imidazo[1,2-a]pyridines not capable of ESIPT emit in the blue region, displaying high fluorescence quantum yield.

Hydrogen-Bonding Motifs in Adducts of Allylamine with the 10 Simplest n-Alcohols: Single-Crystal X-ray Diffraction Studies and Computational Analysis.

In this paper, we analyzed the homologous series of 10 allylamine adducts with n-alcohols from methanol to decanol. These are the first adduct structures containing aliphatic n-alcohols and an aliphatic amine as co-formers. While all of the ingredients are liquids under ambient conditions, the phases were synthesized with the use of the in situ crystallization technique assisted by IR laser-focused radiation at atmospheric pressure. The structures were characterized by single-crystal X-ray diffraction. All of the phases contain the amine and alcohol in a 1:1 ratio. The architecture of the structures, based on hydrogen-bonding interactions between NH2 and OH moieties, depends on the size of the alcohol and changes in a systematic way. The three smallest alcohol adducts contain centrosymmetric layers of molecules of the L4(4)8(8) type. The next four alcohol adducts have the T4(2) topology. The structures with the biggest alcohols contain non-centrosymmetric L6(6) layers. The structural investigations were supported by periodic DFT calculations at the B3LYP/pobTZVP level. The cohesive and adhesive energies made up of layer (E lbe) and ribbon (E rbe) binding energies were used to predict which type of architecture can be formed. The thermal stabilities of the adducts correlate with the melting points of the co-forming alcohols, with no evident relation to the adduct architecture.

On the aromatic stabilization of corannulene and coronene.

The application of set of homodesmotic reactions allowed us to estimate the aromatic stabilization energy (ASE) of corannulene and coronene. Appropriate reactions have been applied to balance syn/anti mismatches in di-, tetra- and hexamethylene substituted derivatives. Based on many different polycyclic reference structures that compensate the effect of strain in the corannulene moiety the value of ASE comes to 44.5 kcal mol(-1). Planar corannulene is more stabilized by cyclic π-electron delocalization by ca. 10.7 kcal mol(-1), as compared with a bowl-shaped system. A similar approach for coronene leads to an ASE equal to 58.4 kcal mol(-1).

Defining rules of aromaticity: a unified approach to the Hückel, Clar and Randic concepts.

The molecular structure of any system may be unambiguously described by its adjacency matrix, A, in which bonds are assigned entry a(ij) = 1 and non-bonded pairs of atoms entry a(ij) = 0. For π-electron-containing conjugated hydrocarbons, this matrix may be modified in order to represent one of the possible Kekulé structures by assigning entry 1 to double bonds and entry 0 to single bonds, leading to the Kekulé matrix K which can be obtained from the A matrix by subtracting 1 from elements a(pq) that represent single bonds in the Kekulé structure. The A and K matrices are the boundary cases of a general matrix A(ε), named perturbation matrix, in which from elements a(pq) that represent single bonds is subtracted a value ε∈<0,1> representing the magnitude of the perturbation. The determinant of the A(ε) matrix is unambiguously represented by an appropriate polynomial that, in turn, can be written in a form containing terms ±(1-ε)(N/2) that identify types of π-electron conjugated cycles (N is the corresponding number of π-electrons). If the sign before the term is (+), then the contribution is stabilizing, but if it is (-) the contribution is destabilizing. The approach shows why and how the Hückel rule works, how the Randic conjugated circuits result from the analysis of canonical structures, and also how the Clar rule may be extended to include aromatic cycles larger than six-membered (aromatic sextet).

Conjugation paths in monosubstituted 1,2- and 2,3-naphthoquinones.

Optimization of monosubstituted (X = NO, NO(2), CN, CHO, Me, OMe, OH, NH(2), NHMe, and N(Me)(2)) derivatives of 1,2- and 2,3-naphthoquinone by use of B3LYP with the 6-311+G** basis set applying the GAUSSIAN03 program allowed us to analyze the character of interactions between the substituents and the carbonyl groups. It is shown that only one of two carbonyl groups exhibited substantial substituent effect evidenced by regression of the CO bond length and delocalization index, DI(CO) on the Hammett substituent constants, σ(p), with a very high correlation coefficient, whereas the other one did not depend in any substantial way on σ(p). Dependences of conjugation path built up of bonds between substituent and oxygen atoms of carbonyl groups on σ(p), give more acceptable correlations if the number of bonds in the path is even than in cases when they are odd.

Structural reasons for the formation of multicomponent products and the influence of high pressure.

(S)-(-)-1-Phenylethanaminium 4-(2,4,6-triisopropylbenzoyl)benzoate (S-PEATPBB) undergoes a photochemical reaction in its crystalline form upon UV irradiation and forms three different products: the first product is the result of a Yang cyclization with the participation of the δ-H atom of o-isopropyl (product D) and the second and third products are obtained via a Norrish-Yang reaction with the involvement of the γ-H atom of 2-isopropyl (product P) and 6-isopropyl (product Z). These products are formed in different proportions (D > P >> Z). The path and kinetics of the reaction were monitored step-by-step using crystallographic methods, both under ambient and high-pressure conditions. The reactivity of S-PEATPBB depends strongly on the geometry of the reaction centre and the volume of the reaction cavity. Due to the geometrical preferences making the cyclization reaction easier to proceed, product D dominates over the other products, while the formation of product Z becomes difficult or almost impossible at high pressure. The reaction proceeds with an increase of the unit-cell volume, which, suppressed by high pressure, results in a significant decrease of the reaction rate. The crystal lattice of S-PEATPBB shows high elasticity. The quality of the partially reacted crystal remains the same after decompression from 0.75 GPa to 0.1 MPa.

IR low-temperature matrix, X-ray and ab initio study on L-isoserine conformations.

The IR low-temperature Ar and Kr matrix spectra of l-isoserine were registered for the first time and interpreted by means of the anharmonic DFT frequencies calculated at the B3LYP/aug-cc-pVTZ and B3LYP/aug-cc-pVDZ levels. 54 l-isoserine conformers were predicted to be stable at the B3LYP/aug-cc-pVDZ level. Population of the 8 most stable conformers was based on the QCISD/aug-cc-pVDZ energies, corrected for thermal anharmonic factors obtained at the B3LYP/aug-cc-pVDZ level. We found several conformers to be present in the measured matrices and conformer 1 to be dominating. Presence of the conformer 2 is well confirmed by the nu(C=O) band at 1790 cm(-1) and two bands at 1380 and 1350 cm(-1). Presence of the conformer 4 is quite well confirmed by the nu(C-O) bands at 1120 and 1095 cm(-1). Slightly weaker arguments are found for the observation of conformers 6 and 3. Calculations on 54 neutral and 5 zwitterionic conformers in water at the IEF-PCM/B3LYP/aug-cc-pVDZ level suggest that one neutral and one zwitterionic conformer co-exist in the aqueous environment. The crystal structure of l-isoserine was solved by X-ray diffraction analysis. The compound crystallizes without solvent in the chiral P2(1)2(1)2 space group. The asymmetric unit contains a single molecule. The molecule is in its zwitterionic form with the CH(2)-NH(3) side chain in the gauche conformation with respect to the hydroxyl group and in the anti conformation with respect to the carboxylate group. The structure of l-isoserine is dominated by a set of intermolecular hydrogen bonds. The strongest one appears between the OH and COOH groups of two neighbouring molecules: the O...H contact is of 1.66(2) A, which is amongst the shortest H-bonds of this kind observed in amino acid crystal structures.

Influence of the substituents on the structure and properties of benzoxaboroles.

Benzoxaboroles possessing aryl substituents in the oxaborole ring were synthesized, and their structures were determined by single-crystal X-ray diffraction. Structures in the solid state are centrosymmetric dimers with two intermolecular hydrogen bonds. These compounds were investigated using a combination of the spectroscopic and the computational approach, comparing their properties with the unsubstituted compound. Investigated compounds were characterized by (1)H, (13)C, and (11)B NMR spectroscopy in solution. Assignment of (1)H and (13)C signals was made on the basis of HSQC and HMBC spectra. The molecular structure of 1,3-dihydro-1-hydroxy-3-phenyl-2,1-benzoxaborole was calculated by the density functional (B3LYP) method with the extended 6-311++G(d,p) basis set. The calculated geometrical parameters were compared with experimental X-ray data, and the differences between experimental and calculated values were found to be of the order of experiment standard deviation, confirming a good description by this level of theory. The harmonic frequencies, potential energy distribution (PED), and IR intensities of this compound and its deuterated analogue were calculated with the B3LYP method. The assignment of the experimental spectra was made on the basis of the calculated PED. The consequence of dimer formation is the splitting of the vibrational modes into symmetric and antisymmetric vibrations. The structure modification resulting from the hydrogen bonded dimers formation is presented.