RESUMEN
We examine the quantum confinement in the photoemission ionization energy in air and optical band gap of carbon nanoparticles (CNPs). Premixed, stretched-stabilized ethylene flames are used to generate the CNPs reproducibly over the range of 4-23 nm in volume median diameter. The results reveal that flame-formed CNPs behave like an indirect band gap material, and that the existence of the optical band gap is attributed to the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gap in the polycyclic aromatic hydrocarbons comprising the CNPs. Both the ionization energy and optical band gap are found to follow closely the quantum confinement effect. The optical band gaps, measured both in situ and ex situ on the CNPs prepared in several additional flames, are consistent with the theory and the baseline data of CNPs from stretched-stabilized ethylene flames, thus indicating the observed effect to be general and that the particle size is the single most important factor governing the variation of the band gap of the CNPs studied. Cyclic voltammetry measurements and density functional theory calculations provide additional support for the quantum dot behavior observed.
RESUMEN
Soot emitted from incomplete combustion of hydrocarbon fuels contributes to global warming and causes human disease. The mechanism by which soot nanoparticles form within hydrocarbon flames is still an unsolved problem in combustion science. Mechanisms proposed to date involving purely chemical growth are limited by slow reaction rates, whereas mechanisms relying on solely physical interactions between molecules are limited by weak intermolecular interactions that are unstable at flame temperatures. Here, we show evidence for a reactive π-diradical aromatic soot precursor imaged using non-contact atomic force microscopy. Localization of π-electrons on non-hexagonal rings was found to allow for Kekulé aromatic soot precursors to possess a triplet diradical ground state. Barrierless chain reactions are shown between these reactive sites, which provide thermally stable aromatic rim-linked hydrocarbons under flame conditions. Quantum molecular dynamics simulations demonstrate physical condensation of aromatics that survive for tens of picoseconds. Bound internal rotors then enable the reactive sites to find each other and become chemically cross-linked before dissociation. These species provide a rapid, thermally stable chain reaction toward soot nanoparticle formation and could provide molecular targets for limiting the emission of these toxic combustion products.
RESUMEN
Various decontamination methods that may be used to extend respirator inventories have been examined for over a decade. In light of the ongoing coronavirus disease 2019 pandemic, many health-care settings are now implementing these techniques amid respirator shortages. We sought to perform a critical review of the available literature regarding decontamination methods to determine which strategies are effective at inactivating the target organism, preserve performance (filter efficiency and fit) of the respirator, leave no residual toxicity from the treatment, and are fast-acting, inexpensive, and readily available. We also identified areas for future research. We found that ultraviolet germicidal irradiation (UVGI) is the most widely studied method, and treatments are effective at inactivating SARS-CoV-2 without diminishing filtration efficiency or fit. These treatments were found to leave no residual toxicity for the wearer, have a relatively short cycle time of less than 1 h, and existing systems can likely be retrofitted to accommodate this method. Further, UVGI (among other treatment methods) has been recommended by the Centers for Disease Control and Prevention (CDC), Occupational Safety and Health Administration (OSHA), and respirator manufacturers. Methods involving microwave-generated steam also show potential in that they are likely effective against SARS-CoV-2, preserve performance, have no residual toxicity, require a short duration treatment cycle (often less than 10 min), and microwave ovens are inexpensive and readily available. Steam methods are currently recommended by the CDC, OSHA, and manufacturers. These respirator decontamination methods are likely also useful against other viruses or pathogens.
Asunto(s)
COVID-19/prevención & control , Descontaminación/métodos , Contaminación de Equipos/prevención & control , Respiradores N95 , Guías como Asunto , Humanos , Respiradores N95/virología , Pandemias , SARS-CoV-2/efectos de los fármacosRESUMEN
SUMMARY: During COVID-19 pandemic crisis, Italian Government has approved Law Decree no. 18 of 17 march 2020, in which art. 15 allows enterprises to produce, import and commercialize surgical masks notwithstanding the current rules of product certification. It is just required that the interested enterprises send to the Italian National Institute of Health a selfcertification in which they declare the technical characteristics of the masks and that masks are produced according to the safety requirements. In this context, a technical-scientific unit was established at the University of Napoli Federico II to provide interested enterprises with state-of-the-art consultancy, testing and measurement services, adhering to rigorous scientific protocols. Characterization tests were carried out on 163 surgical masks and/or materials for their construction and they have enabled the identification of pre-screening criteria to simplify the procedure for evaluating surgical masks using methods for assessing the filtration efficiency of particles and aerosols. Based on experimental results, it has been observed that a filtration efficiency for particles with sizes larger that 650 nm (PFE>650) exceeding 35% might guarantees a bacterial filtration efficiency (BFE) higher than 95% while BFE values higher than 98% are obtained when the PFE>650 is larger than 40%. PFE measurement is extremely simpler with respect to BFE, the latter being time-consuming and requiring specific equipment and methods for its realization. Many tested materials have shown the capability to assure high filtration efficiencies but Spundonded-Meltblown-Spunbonded (SMS), that are layers of non-woven fabric with different weights of Meltblown, can simultaneously guarantee high particle filtration efficiencies with pressure drop values (breathability) in the limits to classify the surgical masks as Type II/IIR. In fact, the fabric products analyzed so far have not been able to simultaneously guarantee adequate BFE and breathability values. On the contrary, Spunbonds of adequate weights can virtually verify both requirements and accredit themselves as possible materials for the production of surgical masks, at least of Type I. Further studies are needed to verify the possibility of producing low-cost, reusable surgical masks that could meet the criteria of circular economy.
Asunto(s)
Infecciones por Coronavirus/prevención & control , Filtración/instrumentación , Máscaras/normas , Pandemias/prevención & control , Neumonía Viral/prevención & control , Textiles/normas , COVID-19 , Diseño de Equipo , Equipo Reutilizado , Humanos , Italia , Ensayo de Materiales , Tamaño de la PartículaRESUMEN
Although mass emissions of combustion-generated particulate matter have been substantially reduced by new combustion technology, there is still a great concern about the emissions of huge numbers of sub-10 nm particles with insignificant mass. These particles have up to orders of magnitude higher surface area to mass ratios compared to larger particles, have surfaces covered with adsorbed volatile and semi-volatile organic species or even are constituted by such species. Currently there is only very little information available on exposure and related health effects specific for smaller particles and first evidences for long-term health effects has only been recently published. However, the fact that these nanoparticles are not easily measured at the exhausts and in the atmosphere and that their biological activity is obscure does not mean that we can overlook them. There is an urgent need to develop i) reliable methods to measure sub-10 nm particles at the exhaust and in the atmosphere and ii) a robust correlation between the chemical structure of the molecules making up combustion-generated nanoparticles and health burden of new combustion technologies. Our attention has to turn to this new class of combustion-generated nanoparticles, which might be the future major constituents of air pollution.
Asunto(s)
Calor , Tamaño de la PartículaRESUMEN
Despite the well-established link between particulate vehicle emissions and adverse health effects, the biological effects produced by ultrafine particles generated from fuel combustion need to be investigated. The biological impact of nano-sized organic carbon particles in the size range 3-7 nm, obtained from an engine fuelled with a standard diesel and four diesel fuels doped with additives of commercial interest is reported. Our data showed that the number of particles < 10 nm is to a very small extent reduced by diesel particle filters, despite its ability to trap micrometric and submicrometric particulates, and that there is a correlation between the additives used and the chemical characteristics of the nanoparticles sampled. The results show that the different nano-sized organic carbon particles induce cytotoxic and proinflammatory effects on the in vitro systems A549 (epithelial cells) and BEAS-2B (bronchial cells). All the fuels tested are able to induce the release of proinflammatory interleukins 8 and 6; moreover, the IC50 values show that the additives can increase the toxic potential of particles 10 times. Further analyses are therefore needed to better define the potential impact of organic ultrafine particles on human health.
Asunto(s)
Gasolina/toxicidad , Nanopartículas/toxicidad , Material Particulado/toxicidad , Emisiones de Vehículos/toxicidad , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Humanos , Concentración 50 Inhibidora , Interleucina-6/metabolismo , Tamaño de la PartículaRESUMEN
Photoelectric charging of particles is a powerful tool for online characterization of submicrometer aerosol particles. Indeed photoionization based techniques have high sensitivity and chemical selectivity. Moreover, they yield information on electronic properties of the material and are sensitive to the state of the surface. In the present study the photoionization charging efficiency, i.e., the ratio between the generated positive ions and the corresponding neutral ones, for different classes of flame-generated carbonaceous nanoparticles was measured. The fifth harmonics of a Nd:YAG laser, 213 nm (5.82 eV), was used as an ionization source for the combustion generated nanoparticles, whereas a differential mobility analyzer (DMA) coupled to a Faraday cup electrometer was used for particle classification and detection. Carbonaceous nanoparticles in the nucleation mode, i.e., sizes ranging from 1 to 10 nm, show a photoionization charging efficiency clearly dependent on the flame conditions. In particular, we observed that the richer the flame is, i.e., the higher the equivalent ratio is, the higher the photon charging efficiency is. We hypothesized that such an increase in the photoionization propensity of the carbonaceous nanoparticles from richer flame condition is associated to the presence within the particles of larger aromatic moieties. The results clearly show that photoionization is a powerful diagnostic tool for the physical-chemical characterization of combustion aerosol, and it may lead to further insights into the soot formation mechanism.
Asunto(s)
Contaminantes Atmosféricos/química , Carbono/química , Nanopartículas/química , Hollín/química , Aerosoles , Ionización del Aire/efectos de la radiación , Rayos Láser , Espectrometría de Masas , Tamaño de la Partícula , Termodinámica , Rayos UltravioletaRESUMEN
Incipient soot early in the flame was studied by high-resolution atomic force microscopy and scanning tunneling microscopy to resolve the atomic structure and orbital densities of single soot molecules prepared on bilayer NaCl on Cu(111). We resolved extended catacondensed and pentagonal-ring linked (pentalinked) species indicating how small aromatics cross-link and cyclodehydrogenate to form moderately sized aromatics. In addition, we resolved embedded pentagonal and heptagonal rings in flame aromatics. These nonhexagonal rings suggest simultaneous growth through aromatic cross-linking/cyclodehydrogenation and hydrogen abstraction acetylene addition. Moreover, we observed three classes of open-shell π-radical species. First, radicals with an unpaired π-electron delocalized along the molecule's perimeter. Second, molecules with partially localized π-electrons at zigzag edges of a π-radical. Third, molecules with strong localization of a π-electron at pentagonal- and methylene-type sites. The third class consists of π-radicals localized enough to enable thermally stable bonds, as well as multiradical species such as diradicals in the open-shell triplet state. These π-diradicals can rapidly cluster through barrierless chain reactions enhanced by van der Waals interactions. These results improve our understanding of soot formation and the products formed by combustion and could provide insights for cleaner combustion and the production of hydrogen without CO2 emissions.
RESUMEN
The current coronavirus pandemic has increased worldwide consumption of individual protective devices. Single-use surgical masks are one of the most used devices to prevent the transmission of the COVID-19 virus. Nevertheless, the improper management of such protective equipment threatens our environment with a new form of plastic pollution. With the intention of contributing to a responsible policy of recycling, in the present work, five decontamination methods for used surgical masks that can be easily replicated with common household equipment are described. The decontamination procedures were hot water at 40 °C and 80 °C; autoclave; microwave at 750 W; and ultraviolet germicidal irradiation. After each decontamination procedure, the bacterial load reduction of Staphylococcus aureus ATCC 6538 was recorded to verify the effectiveness of these methods and, moreover, bacterial filtration efficiency and breathability tests were performed to evaluate mask performances. The best results were obtained with the immersion in 80 °C water and the microwave-assisted sterilization. Both methods achieved a high degree of mask decontamination without altering the filtration efficiency and breathability, in accordance with the quality standard. The proposed decontamination methods represent a useful approach to reduce the environmental impact of this new waste material. Moreover, these procedures can be easily reproduced with common household equipment to increase the recycling efforts.
Asunto(s)
COVID-19 , Artículos Domésticos , COVID-19/prevención & control , Descontaminación/métodos , Filtración , Humanos , MáscarasRESUMEN
Molecules constituting nascent soot particles have been analyzed by two-step laser desorption laser ionization mass spectrometry. Three samples have been collected from a slightly sooting ethylene/air premixed flame with the aim to investigate soot composition in the transition from nucleated to just-grown soot particles. Sampling locations have been selected based on the evolution of the particle size distribution along the flame axis. The mass spectrometric results point to a strong evolution of the molecular composition. Just-nucleated soot is rich in polycyclic aromatic hydrocarbons (PAHs) dominated by medium sizes from 18 to 40 carbon atoms but containing sizes as large as 90 carbon atoms. Most abundant PAHs are in the form of peri-condensed structures. The presence of a large fraction of odd numbered carbon species shows that pentagonal cycles are a common feature of the detected population. Increasing the distance from the burner outlet, i.e., the particle residence time in flame, leads to an evolution of the chemical composition of this population with a major contribution of carbon clusters including also fullerenes up to about 160 carbon atoms. Our data support a scenario in which large PAHs containing pentagonal rings evolve very efficiently upon thermal processing by a series of dehydrogenation and isomerization processes to form fullerenes. This chemistry happens in the early steps of soot growth showing that carbonization is already active at this stage. © 2020 The Authors. Published by Elsevier Inc. on behalf of The Combustion Institute. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
RESUMEN
TiO2 in the form of nanoparticles is characterized by high photocatalytic activity and high resistance to oxidation, making it an excellent candidate to realize coatings for improving the corrosion resistance of aluminium surfaces. Different coating technologies have been proposed over the years, which often involve the use of toxic compounds and very high temperatures. In this work, an alternative and novel one-step method for the coating of aluminium alloy surfaces with titania nanoparticles is presented. The method is based on the combination of aerosol flame synthesis and direct thermophoretic deposition and allows to produce nanostructured thin coating layers of titania with different features. Specifically, 3.5 nm anatase nanoparticles were synthesized and deposited onto aluminium alloy AA2024 samples. The thickness of the coating was changed by modifying the total deposition time. A thermal annealing treatment was developed to improve the adhesion of nano-titania on the substrates, and the morphology and structures of the coatings were characterized using (ultra violet) UV-vis absorption, scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. The corrosion resistance behavior of the coatings was evaluated by means of electrochemical polarization measurements, coupled with a numerical analysis using COMSOL software. Both the experimental and numerical electrochemical polarization curves showed a significant increase in the corrosion potential of coated substrates with respect to the bare aluminium and a decrease in the current density. The coatings obtained with higher deposition time and greater thickness showed the best performances in terms of the resistance of the aluminium surfaces to corrosion.
RESUMEN
Nanostructured films of carbon and TiO2 nanoparticles have been produced by means of a simple two-step procedure based on flame synthesis and thermophoretic deposition. At first, a granular carbon film is produced on silicon substrates by the self-assembling of thermophoretically sampled carbon nanoparticles (CNPs) with diameters of the order of 15 nm. Then, the composite film is obtained by the subsequent thermophoretic deposition of smaller TiO2 nanoparticles (diameters of the order of 2.5 nm), which deposit on the surface and intercalate between the carbon grains by diffusion within the pores. A bipolar resistive switching behavior is observed in the composite film of CNP-TiO2. A pinched hysteresis loop is measured with SET and RESET between low resistance and high resistance states occurring for the electric field of 1.35 × 104 V/cm and 1.5 × 104 V/cm, respectively. CNP-TiO2 film produced by flame synthesis is initially in the low resistive state and it does not require an electroforming step. The resistance switching phenomenon is attributed to the formation/rupture of conductive filaments through space charge mechanism in the TiO2 nanoparticles, which facilitate/hinder the electrical conduction between carbon grains. Our findings demonstrate that films made of flame-formed CNP-TiO2 nanoparticles are promising candidates for resistive switching components.
RESUMEN
The first wave of the COVID-19 pandemic brought about a broader use of masks by both professionals and the general population. This resulted in a severe worldwide shortage of devices and the need to increase import and activate production of safe and effective surgical masks at the national level. In order to support the demand for testing surgical masks in the Italian context, Universities provided their contribution by setting up laboratories for testing mask performance before releasing products into the national market. This paper reports the effort of seven Italian university laboratories who set up facilities for testing face masks during the emergency period of the COVID-19 pandemic. Measurement set-ups were built, adapting the methods specified in the EN 14683:2019+AC. Data on differential pressure (DP) and bacterial filtration efficiency (BFE) of 120 masks, including different materials and designs, were collected over three months. More than 60% of the masks satisfied requirements for DP and BFE set by the standard. Masks made of nonwoven polypropylene with at least three layers (spunbonded-meltblown-spunbonded) showed the best results, ensuring both good breathability and high filtration efficiency. The majority of the masks created with alternative materials and designs did not comply with both standard requirements, resulting in suitability only as community masks. The effective partnering between universities and industries to meet a public need in an emergency context represented a fruitful example of the so-called university "third-mission".
Asunto(s)
COVID-19/prevención & control , Laboratorios , Máscaras/normas , Pandemias , Humanos , ItaliaRESUMEN
The role of polycyclic aromatic hydrocarbons (PAHs) in the formation of nascent soot particles in flames is well established and yet the detailed mechanisms are still not fully understood. Here we provide experimental evidence of the occurrence of dimerization of PAHs in the gas phase before soot formation in a laminar diffusion methane flame, supporting the hypothesis of stabilization of dimers through the formation of covalent bonds. The main findings of this work derive from the comparative chemical analysis of samples extracted from the gas to soot transition region of a laminar diffusion methane flame, and highlight two different groups of hydrocarbons that coexist in the same mass range, but show distinctly different behavior when processed with statistical analysis. In particular, the identified hydrocarbons are small-to-moderate size PAHs (first group) and their homo- and heterodimers stabilized by the formation of covalent bonds (second group).
RESUMEN
This review presents a glossary and review of terminology used to describe the chemical and physical processes involved in soot formation and evolution and is intended to aid in communication within the field and across disciplines. There are large gaps in our understanding of soot formation and evolution and inconsistencies in the language used to describe the associated mechanisms. These inconsistencies lead to confusion within the field and hinder progress in addressing the gaps in our understanding. This review provides a list of definitions of terms and presents a description of their historical usage. It also addresses the inconsistencies in the use of terminology in order to dispel confusion and facilitate the advancement of our understanding of soot chemistry and particle characteristics. The intended audience includes senior and junior members of the soot, black carbon, brown carbon, and carbon black scientific communities, researchers new to the field, and scientists and engineers in associated fields with an interest in carbonaceous material production via high-temperature hydrocarbon chemistry.
RESUMEN
Background: Air pollution is becoming a threatening issue for human health. Many epidemiological studies relate air pollution index to adverse effects in terms of disease incidence and/or disease exacerbation. In our previous studies, we found air pollutants can induce the release of pro-inflammatory cytokines from human peripheral blood cells. To better understand, the effects of air pollution in the lung, we took advantage of an animal model. Experimental Approach: Mice were intratracheally and daily exposed to urban collected particulate matter (PM, PM10, and PM1) and to the sub-micrometric carbonaceous component, Soot. Results: We found that PM10, PM1, and Soot promoted lung inflammation associated to higher bronchial responsiveness and lower dilation together with an immunosuppressive lung environment, characterized by tolerogenic dendritic cells (DCs), macrophages and myeloid -derived suppressor cells (MDSCs), the latter two Arginase I positive. In support, higher recruitment of Treg associated to higher levels of IL-10 were detected in the lung of PM10, PM1, and Soot treated mice. This effect was not abolished by the administration of a caspase-1 inhibitor, Ac-Y-VAD, implying that the canonical inflammasome complex was not associated to PMx-induced lung immunosuppression in mice. Conclusion: Our study proves that PM exposure leads to an immunosuppressive lung environment in a caspase-1-independent manner, paving the way to understand the molecular and cellular mechanism/s underlying the establishment of some respiratory disorders according to the exposure to air pollution.
Asunto(s)
Caspasa 1/metabolismo , Tolerancia Inmunológica/efectos de los fármacos , Material Particulado/toxicidad , Neumonía/inducido químicamente , Animales , Caspasa 1/inmunología , Femenino , Ratones , Ratones Endogámicos C57BL , Neumonía/inmunología , Neumonía/metabolismoRESUMEN
The 10th International Congress on Combustion Byproducts and their Health Effects was held in Ischia, Italy, from June 17-20, 2007. It is sponsored by the US NIEHS, NSF, Coalition for Responsible Waste Incineration (CRWI), and Electric Power Research Institute (EPRI). The congress focused on: the origin, characterization, and health impacts of combustion-generated fine and ultrafine particles; emissions of mercury and dioxins, and the development/application of novel analytical/diagnostic tools. The consensus of the discussion was that particle-associated organics, metals, and persistent free radicals (PFRs) produced by combustion sources are the likely source of the observed health impacts of airborne PM rather than simple physical irritation of the particles. Ultrafine particle-induced oxidative stress is a likely progenitor of the observed health impacts, but important biological and chemical details and possible catalytic cycles remain unresolved. Other key conclusions were: (1) In urban settings, 70% of airborne fine particles are a result of combustion emissions and 50% are due to primary emissions from combustion sources, (2) In addition to soot, combustion produces one, possibly two, classes of nanoparticles with mean diameters of ~10 nm and ~1 nm. (3) The most common metrics used to describe particle toxicity, viz. surface area, sulfate concentration, total carbon, and organic carbon, cannot fully explain observed health impacts, (4) Metals contained in combustion-generated ultrafine and fine particles mediate formation of toxic air pollutants such as PCDD/F and PFRs. (5) The combination of metal-containing nanoparticles, organic carbon compounds, and PFRs can lead to a cycle generating oxidative stress in exposed organisms.
RESUMEN
Ultrafine particles (UFP) generated by combustion processes are often associated with adverse health effects. However, little is known about the inflammatory processes generated by UFP that may underlie their toxicological activity. Murine macrophages (J774.1 cells) and human peripheral blood mononuclear cells (PBMCs) were used to evaluate the molecular mechanism underlying the pro-inflammatory activity of UFP. The addition of soot particles to J774.1 cells induced a concentration-dependent release of IL-1α, IL-1ß and IL-33 This effect was not associated with cell death and, in contrast to literature, was pronounced at very low concentrations (5-100 pg/ml). Similarly, UFP induced the release of IL-1α, IL-18 and IL-33 by PBMCs. However, this effect was solely observed in PBMCs obtained from smokers, as the PBMCs from non-smokers instead released higher levels of IL-10. The release of these cytokines after UFP exposure was caspase-1- and NLRP3 inflammasome-dependent in PBMCs from healthy smokers, whereas IL-1α release was calpain-dependent. These results show that UFP at very low concentrations are able to give rise to an inflammatory process that is responsible for IL-1α, IL-18 and IL-33 release, which is pronounced in PBMCs from smokers, confirming that these individuals are especially susceptible to inflammatory-based airway diseases once exposed to air pollution.
Asunto(s)
Interleucina-1alfa/metabolismo , Interleucina-1beta/metabolismo , Interleucina-33/metabolismo , Leucocitos Mononucleares/efectos de los fármacos , Hollín/toxicidad , Animales , Caspasa 1/metabolismo , Células Cultivadas , Humanos , Leucocitos Mononucleares/citología , Leucocitos Mononucleares/metabolismo , Macrófagos/citología , Macrófagos/efectos de los fármacos , Macrófagos/metabolismo , Ratones , Proteína con Dominio Pirina 3 de la Familia NLR/metabolismo , Tamaño de la Partícula , Fumadores , Hollín/químicaRESUMEN
Chronic obstructive pulmonary disease (COPD) is considered the fourth-leading causes of death worldwide; COPD is caused by inhalation of noxious indoor and outdoor particles, especially cigarette smoke that represents the first risk factor for this respiratory disorder. To mimic the effects of particulate matter on COPD, we isolated peripheral blood mononuclear cells (PBMCs) and treated them with combustion-generated ultrafine particles (UFPs) obtained from two different fuel mixtures, namely, pure ethylene and a mixture of ethylene and dimethylfuran (the latter mimicking the combustion of biofuels). UFPs were separated in two fractions: (1) sub-10 nm particles, named nano organic carbon (NOC) particles and (2) primarily soot particles of 20-40 nm and their agglomerates (200 nm). We found that both NOC and soot UFPs induced the release of IL-18 and IL-33 from unstable/exacerbated COPD-derived PBMCs. This effect was associated with higher levels of mitochondrial dysfunction and derived reactive oxygen species, which were higher in PBMCs from unstable COPD patients after combustion-generated UFP exposure. Moreover, lower mRNA expression of the repairing enzyme OGG1 was associated with the higher levels of 8-OH-dG compared with non-smoker and smokers. It was interesting that IL-18 and IL-33 release from PBMCs of unstable COPD patients was not NOD-like receptor 3/caspase-1 or caspase-8-dependent, but rather correlated to caspase-4 release. This effect was not evident in stable COPD-derived PBMCs. Our data suggest that combustion-generated UFPs induce the release of caspase-4-dependent inflammasome from PBMCs of COPD patients compared with healthy subjects, shedding new light into the biology of this key complex in COPD.
RESUMEN
The microstructures of atmospheric pressure, counter-flow, sooting, flat, laminar ethylene diffusion flames have been studied numerically by using a new kinetic model developed for hydrocarbon oxidation and pyrolysis. Modeling results are in reasonable agreement with experimental data in terms of concentration profiles of stable species and gas-phase aromatic compounds. Modeling results are used to analyze the controlling steps of aromatic formation and soot growth in counter-flow configurations. The formation of high molecular mass aromatics in diffusion controlled conditions is restricted to a narrow area close to the flame front where these species reach a molecular weight of about 1000 u. Depending on the flame configuration, soot formation is controlled by the coagulation of nanoparticles or by the addition of PAH to soot nuclei.