Cognitive impairment and edentulism among older adults: an observational study using claims data.

BACKGROUND: The scientific link between mastication strength and cognitive function has not yet been strongly corroborated in population studies. Utilizing large-scale claims, we aim to investigate the association between edentulism and cognitive impairment in older American adults. METHODS: Using de-identified claims from a commercial insurer from 2015-2019, we conducted a retrospective cohort study using multilevel regression models to evaluate the association between denture status and clinically diagnosed cognitive impairment. Secondary analysis included symptomatic cognitive impairment in the outcome. RESULTS: Adjusting for individual-level risk factors, denture status was significantly associated with clinical cognitive impairment with odds ratios of 1.13 (95%CI: 1.02-1.25) and 1.26, (95%CI: 1.09-1.45) for complete dentures on one or both jaws, respectively. Including symptomatic cognitive impairment in the analysis did not substantially change our fundamental findings. CONCLUSION: Prevention and treatment of oral diseases should be considered a key component in preserving the overall wellness of older adults.

Efficacy of bisphosphonates in detection of early enamel caries using NIR fluorescence imaging and inhibition of caries progression.

NIR fluorescence imaging using bisphosphonate-Indocyanine green has been indicated for early interproximal caries detection. This study assessed diagnostic accuracy of caries detection by NIR fluorescence imaging with OsteoSense 750® (OS750) in vitro and ex vivo, and to analyze the therapeutic efficacy of a bisphosphonate (Etidronate) in inhibiting enamel caries progression in vitro. Methods: Four experiments were conducted using extracted human teeth; 1) to calculate the infiltration rate of OS750 into interproximal white spot lesions using fluorescence microscope, 2) to assess diagnostic accuracy of interproximal natural white spot lesions using desktop NIR fluorescence imaging device in vitro setting, 3) to assess diagnostic accuracy of artificially created deeper enamel carious lesion (0.5 mm~1.0 mm) using NIR fluorescence image through the head-mount display in ex vivo setting, 4) to compare the progression on the enamel caries lesions treated by Etidronate, NaF and distilled-water. Diagnostic accuracy was analyzed using sensitivity, specificity and receiver operating curves (ROC). The caries progression was calculated with micro-CT and was statistically analyzed using a two-way ANOVA and the Tukey HDS post-hoc test. Results: 1) The infiltration rate of OS750 was 101.83% ± 8.66 (Min: 90.10%, Max: 133.94%). 2) The average of sensitivity and specificity in vitro setting experiments were 86.7% ± 4.4% and 70% ± 11%, respectively. The average of area under the ROC curves (AUC) was 0.883 ± 0.059 indicating excellent performance. 3) The mean sensitivity and specificity in ex vivo setting was 82.97% ± 15% and 76.78% ± 13.27% respectively. 4) The carious lesion volume treated by Etidronate was significantly smaller at post treatment-1 (p<0.05) and treatment-2 (p<0.01) than the control. There was no significant difference in lesion volume in the Etidronate and NaF group at the time point of post treatment-1. Conclusion: This study suggests that bisphosphonates contribute to both early diagnosis of enamel caries and inhibition of caries progression.

A prospective clinical trial to assess the optical efficacy of pink neck implants and pink abutments on soft tissue esthetics.

OBJECTIVE: The purpose of this prospective, randomized, controlled, multicenter clinical study was to analyze the optical effects of an anodized pink colored implant shoulder/abutment system in the peri-implant mucosa of immediately placed dental implants. MATERIALS AND METHOD: Forty subjects with a restoratively hopeless tooth in the maxillary esthetic zone, were recruited and randomized to receive either a pink-neck implant, or a conventional gray implant. All patients received an immediate implant and immediate provisional and two identical CAD/CAM titanium abutments with different surface colors: pink and gray, and one zirconia all-ceramic crown. The color of the peri-implant mucosa was measured using a dental spectrophotometer and analyzed using CIELAB color system. RESULTS: The overall color difference between the peri-implant mucosa with a pink abutment and a gray abutment was ΔE = 4.22. Patients with gray implants presented a color change of ΔE = 3.86-4.17 with this abutment change, while patients with pink implants had a color change of ΔE = 3.84-4.69. The peri-implant mucosa with a pink abutment was significantly more red when compared with a gray abutment (P ≤ .01). CONCLUSIONS: When a pink abutment was used, there is a significant color change of the peri-implant mucosa that is above the detectable color threshold. CLINICAL SIGNIFICANCE: Esthetic outcomes are important for the success of implant treatment of maxillary anterior implants. The phenomenon of the gray color of a dental implant and abutment shining through the peri-implant mucosa has been documented in the literature. The objective of this study was to assess the optical effect of an anodized pink-neck implant and a pink abutment on the color of peri-implant mucosa. This study demonstrates that using pink-neck implant and a pink abutment would contribute positively to the overall esthetic outcome for an anterior implant.

The Effect of a Toothbrush Handle Design in Combating Microbial Contamination.

OBJECTIVES: This study aims to assess the difference in microbial contamination of a toothbrush with a smooth handle versus a toothbrush with a grooved handle design. METHODS: Twenty-six volunteers were randomized into two groups. The first group used a smooth handle toothbrush for two months, followed by a grooved handle toothbrush for two months. The second group had the order reversed. Following the two-month use, the toothbrushes were submitted for microbial analysis. Effect size, as well as Wilcoxon signed-rank test were used to calculate the differences between total colony count, bacterial DNA, and endotoxin levels from the two toothbrush handle types. RESULTS: There was no significant difference in colony count between the smooth (mean 580 CFU/mL, SD 1,684 CFU/mL) and grooved (mean 19,059 CFU/mL, SD 80,972 CFU/mL) handles (p = 0.12). Total DNA count was significantly less (p = 0.01) on the smooth handle (mean 68,038 RFU/mL, SD 81,659) compared to the grooved handle (mean 209,312 RFU/mL, SD 257,169 RFU/mL). Endotoxin levels were significantly less (p = 0.01) on the smooth handle (mean 0.16 EU/mL, SD 0.30 EU/mL) compared to the grooved handle (mean 0.43 EU/mL, SD 0.49 EU/mL). CONCLUSIONS: The smooth handle toothbrush had significantly less bacterial contamination compared to the grooved handle toothbrush, as measured by total DNA count and endotoxin levels.

Clinical documentation of dental care in an era of electronic health record use.

BACKGROUND: Although complete and accurate clinical records do not guarantee the provision of excellent dental care, they do provide an opportunity to evaluate the quality of care provided. However, a lack of universally accepted documentation standards, incomplete record-keeping practices, and unfriendly electronic health care record (EHR) user interfaces are factors that have allowed for persistent poor dental patient record keeping. METHODS: Using 2 different methods-a validated survey, and a 2-round Delphi process-involving 2 appropriately different sets of participants, we explored what a dental clinical record should contain and the frequency of update of each clinical entry. RESULTS: For both the closed-ended survey questions and the open-ended Delphi process questions, respondents had a significant degree of agreement on the "clinical entry" components of an adequate clinical record. There was, however, variance on how frequently each of those clinical entries should be updated. SUMMARY: Dental providers agree that complete and accurate record keeping is essential and that items such as histories, examination findings, diagnosis, radiographs, treatment plans, consents, and clinic notes should be documented. There, however, does not seem to be universal agreement how frequently such items should be recorded. CLINICAL IMPLICATIONS: As the dental profession moves towards prevalent use of electronic health care records, the issue of standardization and interoperability becomes ever more pressing. Settling issues of standardization, including record documentation, must begin with guideline-creating dental professional bodies, who need to clearly define and disseminate what these standards should be and everyday dentists who will ultimately ensure that these standards are met and kept.

Assessing the accuracy of computer color matching with a new dental porcelain shade system.

STATEMENT OF PROBLEM: In a previous study, a novel computer color matching system for dental ceramic restoration was developed, and 21 new shades were established. Theoretically, a natural tooth color can be accurately reproduced by combining 2 or 3 ceramic mixtures from the database of 21 new shades. PURPOSE: The purpose of this study was to test the use of these shades in conjunction with the computer color matching system to determine their ability to accurately reproduce the body color of 29 shade tabs from a shade guide (VITAPAN 3D-Master). MATERIAL AND METHODS: Disks of 21 reference shades were prepared with porcelain (Cerabien CZR) and polished to 1.0 mm thickness. A spectrophotometer was used to measure the reflectance values from 380 to 780 nm for each disk; the scattering coefficient and absorption coefficient were determined. By using the reflectance values and the scattering and absorption coefficients, the computer color matching program generated porcelain prescriptions incorporating proportions from the 21 reference shades to reproduce the shade tabs. Disks were fabricated from the prescriptions, polished to 1.0 mm thickness, then placed over a zirconia core plate and measured with the spectrophotometer. The color differences (ΔE*) between the shade tabs and the corresponding ceramic disks were calculated. Statistical analysis was performed with the 1-sample t test. RESULTS: The ΔE* values between computer color matching specimens and the target shade tabs varied from 0.5 to 1.9, with an average ΔE* of 1.3, which was significantly less than the clinically detectable ΔE* threshold of 1.6 (P<.001). CONCLUSIONS: The computer color matching system with the established 21 new shades is accurate and effective for reproducing tooth shades.

Color effects of gingiva on cervical regions of all-ceramic crowns.

STATEMENT OF PROBLEM: The final color of all-ceramic crowns is influenced by the color of both the remaining tooth structure and the surrounding gingival tissue. The optical effects of gingival tissue on an all-ceramic crown have never been fully studied. PURPOSE: The purpose of this study is to investigate the effects of gingival color on ceramic crowns in the cervical region. materials and methods: Thirty-one all-ceramic crowns of differing shades were included in this study. Using a spectrophotometer, the color values of each crown were measured on a typodont in the absence of an artificial gingiva (control group) and in the presence of an artificial gingiva (test group). CIELAB color coordinates (L*, a*, b*) were collected from three regions of the cervical area in descending order from the gingival margin (upper region, middle region, and lower region). Color difference values (ΔE*) were calculated for each cervical region between the test and control groups. ΔE* between the test and control groups from the upper to lower cervical regions was also compared with each other. The statistical analysis was performed using the student t-test and one-way analysis of variance (ANOVA) test. RESULTS: The mean ΔE* values between the test group and control group at the upper, middle, and lower cervical regions were 5.8, 2.8, and 1.8, respectively. Significant color differences between the test and control group were detected in all three incremental regions (p < 0.001 at ΔE* = 1.6 threshold), with all color coordinates (L*, a*, and b*) contributing significantly to the color differences in these regions (p < 0.001). The color variations in the cervical area also varied significantly from the upper region to the lower region, with L* and a* contributing most to the differences. CONCLUSIONS: The presence of artificial gingiva is a critical factor in precise color matching and color reproduction for all-ceramic crowns. CLINICAL SIGNIFICANCE: Gingival tissue has significant optical effects on the color of all-ceramic crowns at the cervical areas; therefore, it is suggested that artificial gingiva be used by both dentists and ceramists while matching and replicating tooth color with ceramic restorations. (J Esthet Restor Dent ••:••-••, 2012).

Diagnosis of Tooth Prognosis Using Artificial Intelligence.

The accurate diagnosis of individual tooth prognosis has to be determined comprehensively in consideration of the broader treatment plan. The objective of this study was to establish an effective artificial intelligence (AI)-based module for an accurate tooth prognosis decision based on the Harvard School of Dental Medicine (HSDM) comprehensive treatment planning curriculum (CTPC). The tooth prognosis of 2359 teeth from 94 cases was evaluated with 1 to 5 levels (1-Hopeless, 5-Good condition for long term) by two groups (Model-A with 16, and Model-B with 13 examiners) based on 17 clinical determining factors selected from the HSDM-CTPC. Three AI machine-learning methods including gradient boosting classifier, decision tree classifier, and random forest classifier were used to create an algorithm. These three methods were evaluated against the gold standard data determined by consensus of three experienced prosthodontists, and their accuracy was analyzed. The decision tree classifier indicated the highest accuracy at 0.8413 (Model-A) and 0.7523 (Model-B). Accuracy with the gradient boosting classifier and the random forest classifier was 0.6896, 0.6687, and 0.8413, 0.7523, respectively. Overall, the decision tree classifier had the best accuracy among the three methods. The study contributes to the implementation of AI in the decision-making process of tooth prognosis in consideration of the treatment plan.

Accuracy of a Method to Monitor Root Position Using a 3D Digital Crown/Root Model during Orthodontic Treatments.

This study aimed to assess the accuracy of a method of predicting post-movement root position during orthodontic treatment using a 3D digital crown/root model (3DCRM) created with pre-movement records of both cone-beam computed tomography (CBCT) and dental arch digital scans. Pre- and post-movement CBCT scans and dental arch digital scans of five patients who had completed orthodontic treatments were used in this study. The 3DCRM was superimposed onto the post-movement scanned dental arch to identify the post-movement root position (test method). Post-movement CBCT (referenced as the current method) served as the control to identify the actual post-movement root position. 3D-coordinate analysis revealed no significant differences between the test and current methods along the X and Y axes. However, the discrepancy on the Z axis (especially in cases of intrusion) was greater than that in all other directions for all three tooth types examined (p < 0.05). A strong positive correlation between the degree of discrepancy and the distance of tooth movement was observed on the Z axis (r = 0.71). The 3DCRM method showed promising potential to accurately predict root position during orthodontic treatments without the need for a second CBCT. However, root resorption, which affected the Z axis prediction, needs to be closely monitored using periapical radiographs to complement this method.

Comprehensive Assessment of the Universal Healthcare System in Dentistry Japan: A Retrospective Observational Study.

Japan's universal healthcare insurance is facing economic challenges due to the advanced aging society, however, objective data of dental expenditure has never been introduced. This study aimed to identify the associated factors with dental expenditures using government-provided digitized insurance claims data and calculated the spending in the context of dental cost per person (DCPP). Seven associated factors analyzed were age, demographic, geographic, socioeconomic, regional wealth, the impact of the 8020-national campaign implementation (keep 20 teeth at age 80), and the effect of the home-visit dentistry for the elders. The average DCPP was high in older populations (75+) in all prefectures. The prefectures with the highest and lowest DCPP were significant compared to other states and retained their respective places in the cost hierarchy over the four years. The prefectures with more citizens participating in government assistance programs (GAP) had greater DCPPs. Dental costs were significantly related to geographic regions, age, per capita income, government assistance program prevalence, office complete denture frequency, and home visit care per patient. With a growing aging population, dental care costs will continue to increase, burdening its fiscal future. Associated factors identified should be considered to control the contentious increase of healthcare cost.

An In Vivo Spectrophotometric Analysis of Gingival Acrylic Shade Guide.

Selecting shades of acrylic gingival restorative material is challenging. This study examined the shade appropriateness of five acrylic gingival restorative materials. The color was analyzed using an intraoral spectrophotometer (Crystaleye®, Olympus). The gingival color of maxillary incisors for eighty-nine patients was measured. CIELAB color coordinates (L*, a* and b*) were obtained, and the color difference ∆E (Coverage Error: CE) between shade tabs and natural gingival color of patient samples for each shade guide system were compared. Repeated ANOVA and post hoc analyses with Tukey's HSD were performed. There was a significant difference among the mean minimum CEs of the tab sets (p < 0.01). GC Acrylic (CE = 5.89 ∆E ± 2.97) and Lucitone 199® (CE = 6.55 ± 3.33) groups exhibited CEs significantly lower than all other groups (all p < 0.001). The IvoCap® system exhibited the highest CE (10.78 ± 3.80), significantly greater than all other groups (p < 0.001). No significant differences were observed based on sex (p = 0.055) or ethnicity (p = 0.327). The GC Acrylic and Lucitone 199® shade guides showed the lowest CEs. All guides had coverage errors above 5.89 ∆E, which is larger than ∆E thresholds of acceptability. Of the materials evaluated in this study, GC Acrylic and Lucitione 199® are best able to reproduce the clinical appearance of the gingival tissue. Many patients have tissue that cannot be reproduced accurately with currently available materials.

Association between cognitive health and masticatory conditions: a descriptive study of the national database of the universal healthcare system in Japan.

Cognitive health is subject to decline with increasing numbers of lost teeth which impacts mastication. This study is a descriptive data analysis of the association between masticatory and cognitive conditions using a large database. We obtained the dental and medical records from Japan's universal healthcare system (UHCS) from the national database in 2017. The data from 94% of the Japanese population aged 65 and over is included. It is inclusive of diagnostic codes for various types of cognitive impairment, as well as dental treatment records from 2012 to 2017. The cognitive impairment group was compared to those without a diagnosis of cognitive impairment. Crude odds ratio between loss of mastication with natural teeth (exposure) and cognitive impairments (outcome) were compared. Patients who have lost masticatory function are likely to have cognitive impairment with an odds ratio of 1.89 (p<0.0001) for early elderly (aged 65-75) and 1.33 (p<0.0001) for advanced elderly (over 75). Patients who are edentulous and function with complete dentures are likely to have cognitive impairment with an odds ratio of 2.38 (p<0.0001) and 1.38 (p<0.0001), respectively. The data shows a convincing and significant result of an association between cognitive health and oral health, related to masticatory conditions.

Effects of healthcare policy and education on reading accuracy of bitewing radiographs for interproximal caries.

OBJECTIVES: The aim of this study is to assess the accuracy of bitewing radiograph interpretation of predoctoral students, residents and general dentists who work under different core curriculum of dental education and healthcare policy. METHODS: A total of 118 examiners including predoctoral dental students, residents and general dentists from USA and Japan were tasked with evaluating a series of bitewing radiographs and diagnosing interproximal carious lesions. This study was approved by the Harvard Medical School Institutional Review Board (IRB). Participants graded interproximal aspects of those images and categorized the following criteria; "intact", "enamel caries <1/2 width", "enamel caries >1/2 width" or "caries into dentin". The gold-standard was determined by the consensus of two HSDM full-time faculty. RESULTS: There was significant difference in the sensitivity for all three caries levels between the two groups but there was no significant difference on specificity. The positive-predictive and negative-predictive values of the USA group for the enamel caries (<1/2 of enamel) were significantly higher than the Japanese group. The average of AUC (ROC) was significantly higher in the USA group (0.885 ± 0.04) than the Japanese group (0.785 ± 0.08, p<0.01). CONCLUSION: Teaching and adopting BW radiographs for diagnosis of interproximal caries is integral for dental providers to accurately and efficiently use them in their practices. It is critical that all dental educators approach policymakers to explain the importance of BW radiographs and promote their efficacy for prevention and early diagnosis of interproximal caries.

Spectrophotometric analysis of tooth color reproduction on anterior all-ceramic crowns: Part 1: analysis and interpretation of tooth color.

UNLABELLED: Color matching of a natural maxillary central incisor is one of the most difficult challenges in clinical dentistry. Accurate color determination and interpretation of tooth color information in ceramic work is an important step in achieving success in ideal color reproduction. In this case study, factors that influence tooth color determination were analyzed, and the process of interpretation of tooth color information was assessed based on scientific color data using a novel dental spectrophotometer system. An all-ceramic crown for a maxillary right central incisor was the subject of this color assessment. The contralateral incisor was an intact natural tooth that was bleached and then used as the target shade for an all-ceramic crown. The dental spectrophotometer (Crystaleye, Olympus, Tokyo, Japan) was used for tooth color measurement and analysis. The target tooth, prepared tooth, maxillary arch, and face images were captured for color information. Tooth color stabilization related to tooth bleaching and tooth dehydration was assessed. Based on tooth color data obtained by the dental spectrophotometer, color was analyzed in several different areas of a tooth using CIELAB (Commission Internationale de l'Eclarirage) color coordinates L*, a*, b*, and color difference Delta E. Interpretation of the tooth color information was made in each of porcelain layers on a blue map, and its intensions for color reproduction were described. Throughout this spectrophotometric assessment, the process of stabilized tooth color determination, tooth color analysis, interpretations, and fabrication of a blue map for porcelain work was clarified with color data as scientific evidence. CLINICAL SIGNIFICANCE: The use of a dedicated dental spectrophotometer allows the evaluation and measurement of the color of a bleached tooth. This allows the laboratory technician to more precisely understand the bleached tooth shade as well as when the bleached tooth color has become stable enough to match to a contralateral all-ceramic crown restoration.

Spectrophotometric analysis of tooth color reproduction on anterior all-ceramic crowns: Part 2: color reproduction and its transfer from in vitro to in vivo.

Color reproduction of an anterior tooth requires advanced laboratory techniques, talent, and artistic skills. Color matching in a laboratory requires the successful transfer from in vivo with careful considerations. The purpose of this study was to monitor and verify the color reproduction process for an anterior all-ceramic crown in a laboratory through spectrophotometric measurements. Furthermore, a crown insertion process using composite luting cements was assessed, and the final color match was measured and confirmed. An all-ceramic crown with a zirconia ceramic coping for the maxillary right central incisor was fabricated. There was a significant color difference between the prepared tooth and the die material. The die material selected was the closest match available. The ceramic coping filled with die material indicated a large color difference from the target tooth in both lightness and chromaticity. During the first bake, three different approaches were intentionally used corresponding with three different tooth regions (cervical, body, and incisal). The first bake created the fundamental color of the crown that allowed some color shifts in the enamel layer, which was added later. The color of the completed crown demonstrated an excellent color match, with Delta E 1.27 in the incisal and 1.71 in the body. In the cervical area, color match with Delta E 2.37 was fabricated with the expectation of a color effect from the underlying prepared tooth. The optimal use of composite luting cement adjusted the effect from the underlying prepared tooth color, and the color match fabricated at a laboratory was successfully transferred to the clinical setting. The precise color measurement system leads to an accurate verification of color reproduction and its transfer. CLINICAL SIGNIFICANCE The use of a dedicated dental spectrophotometer during the fabrication of an all-ceramic crown allows the dentist and the laboratory technician to accurately communicate important information to one another about the shade of the tooth preparation, the shade of the contralateral target tooth, and the influence of luting cement on the final restoration, thereby allowing the technician better control over the outcome of their tooth color matching efforts and the final color match of an all-ceramic restoration.

Interprofessional value-based health care: Nurse practitioner-dentist model.

OBJECTIVES: The United States health system is challenged to improve patient and population health, enhance patients' experience of care, and reduce health care costs. Value-based health care (VBHC) models are proposed to address these issues. Medical health systems are making strides toward VBHC, whereas dental care systems lag behind. The aims of this paper are to a) present study findings of an interprofessional practice model integrating oral health and primary care in a dental practice setting, and b) discuss practice and research implications for advancing VBHC approaches in oral health. METHODS: A nonexperimental research method was employed to evaluate the Nurse Practitioner-Dentist Model for Primary Care (NPD Model) at the Harvard Dental Center. Pretest/post-test design was used to assess clinical patient outcomes for a convenience cohort of Medicare beneficiaries (n = 31) with a reported diagnosis of hypertension and/or type 2 diabetes. Clinical outcome measures included: blood pressure, weight, body mass index (BMI), and Hemoglobin A1c. RESULTS: Positive and significant improvements in biometrics (blood pressure, body weight, BMI, HbA1c) were found. CONCLUSIONS: The NPD Model is an early prototype for interprofessional VBHC in oral health and holds promise for improving patient and population health outcomes. Integration of interprofessional VBHC in oral health is an imperative for achieving the Triple Aim to improve the overall health of our nation.

Prescribing patterns in a US dental school from 2010 to 2017.

OBJECTIVE: Dental education has an essential role in helping combat the opioid and antibiotic resistance crises. This study evaluates the prescribing practices of clinical instructors, advanced graduate residents, and predoctoral students in an academic dental setting. METHODS: A retrospective chart review was conducted of electronic dental records from the years 2010 to 2017. The proportions of prescriptions for each drug group was calculated by prescribers' training level and specialty. Descriptive statistics were calculated for the daily opioid Morphine Milligram Equivalent (MME) dose prescribed across years and provider characteristics. RESULTS: Over the 8 years, 65,160 prescriptions were written for 10,374 patients by 625 prescribers. The most commonly prescribed drugs were for fluoride-based medications (30%) and antibiotics (24%). Periodontists had the greatest absolute number of opioid analgesics prescriptions (n = 2712); oral maxillofacial surgeons (OMFS) prescribed more opioids than other classes of drug (49%) as a proportion of within-specialty prescriptions. Antibiotics were the most common drugs prescribed by endodontists (46%) and second most common drugs prescribed by periodontists (25%), OMFS (28%), and prosthodontists (21%). From 2010 to 2017, the proportion of prescriptions for antibiotics remained unchanged, while that of fluoride-based drugs increased from 2010 to 2014 and plateaued thereafter. The proportion of prescriptions for opioid analgesics decreased from 18% to 7%. The median daily MME dose across year and provider characteristics stayed constant (<50 MME). CONCLUSION: These results demonstrate encouraging prescription trends for opioid and fluoride-based drugs. Due to the high prevalence of antibiotic prescriptions in academic dental settings, stewardship approaches should be emphasized.

Effect of Magnet Position on Tipping and Bodily Tooth Movement in Magnetic Force-Driven Orthodontics.

The goal of our study is to launch magnetic force-driven orthodontics. This continuous study investigated the influence of magnet position on tipping and bodily tooth movement, using 3D printing technology and digital analysis. Orthodontic typodont models (TMs) for space-closure were 3D printed to mimic maxillary central incisors. Nd-Fe-B magnets were placed in the middle third (Model-M), and the cervical third (Model-C), of the tooth. TMs, before and after movement, were digitally scanned and superimposed. The 3D digital coordinates (X, Y, and Z axes), and rotations (yaw, pitch, and roll) of the tooth crown and root, were calculated and compared between the two magnet position settings. Model-M showed higher rates of movement, but more rotation than Model-C (p < 0.01). The root apex of Model-M moved in the opposite direction of the crown (R = -0.29), indicating tipping movement. In contrast, the crown and root apex moved in the same direction (R = 0.56) in Model-C, indicating bodily movement. These patterns were confirmed in a typodont model of a moderate crowding case. The results validated that modifying the magnet position increased the amount of bodily tooth movement, and decreased rotation/tipping in an ex vivo setting.

Trans-trigeminal transport of masseter-derived neprilysin to hippocampus.

OBJECTIVE: To show the possible occurrence of exosomal transport of neprilysin from masseter muscle to hippocampus via trigeminal nerve in the living mouse. DESIGN: Mouse C2C12 myotube-derived exosomes were labeled with near-infrared (NIR) dye and injected into the masseter muscle to track their fluorescence from masseter muscle to hippocampus via trigeminal nerve. A plasmid vector encoding green fluorescent protein (GFP)-tagged neprilysin (GFP-neprilysin) was transfected into masseter muscle of C57BL/6 J mice. Expression of mRNA and encoded protein of the transgene was identified in masseter muscle, trigeminal nerve and hippocampus by RT-PCR and Western blot, respectively. RESULTS: Peak of exosomal NIR in masseter muscle at time 0 rapidly reduced at 3 h and 6 h along with the subsequent increases in trigeminal nerve and hippocampus. Expression of GFP-neprilysin mRNA was detected in masseter muscle, but not trigeminal nerve and hippocampus. On the other hand, the corresponding protein of GFP-neprilysin was identified in the three tissues on day 3 after transfection into masseter muscle as a single band on Western blots with anti-GFP and anti-neprilysin antibodies. CONCLUSION: The appearance of GFP-neprilysin protein in trigeminal nerve and hippocampus without a corresponding mRNA expression indicated the protein's origin from the masseter muscle. Concomitant migration of NIR-exosomes from masseter muscle to hippocampus via trigeminal nerve suggested the possible occurrence of exosomal transport of neprilysin.

Comparison of Peri-implant Soft Tissue Color with the Use of Pink-Neck vs Gray Implants and Abutments Based on Soft Tissue Thickness: A 6-Month Follow-up Study.

PURPOSE: To compare the optical effects of an immediately placed anodized pink-neck implant and abutment vs a conventional gray implant and abutment in relation to soft tissue thickness 6 months after the restoration was completed. MATERIALS AND METHODS: Forty patients with a hopeless maxillary anterior tooth received an immediate implant and an immediate provisional or custom healing abutment after flapless extraction. Participants were randomized to receive either a conventional titanium implant (control) or a pink-neck implant (test). All patients then received two identical CAD/CAM titanium abutments (one conventional gray, delivered first, and one anodized to appear pink, delivered 3 weeks after) and a zirconia crown. A spectrophotometer was used to record the color of the peri-implant mucosa and gingiva 3 weeks after delivery of each abutment and 6 months after the final restoration was delivered. The color difference between the two sites was calculated (ΔL*, Δa*, Δb*), and correlations with soft tissue thickness, change in ridge dimension, and implant position were assessed. RESULTS: Irrespective of the randomization group, changing the abutments from gray to pink showed a change in color between the peri-implant mucosa and the natural gingiva. Patients with a thin gingival biotype showed a statistically significant color change (P = .00089) in the a* axis, meaning that the gingiva appeared more pink (Δa*). No significant correlation between the soft tissue color and buccolingual collapse, vertical recession, or implant position was observed in either group. CONCLUSION: The difference in color observed between the peri-implant mucosa and the gingiva was considerable in all groups. Anodized pink implants and abutments could reduce the difference in the red aspect (Δa*) of the peri-implant mucosa compared to the adjacent gingiva in patients with a thin biotype.