NHC-CDI Ligands Boost Multicarbon Production in Electrocatalytic CO2 Reduction by Increasing Accumulated Charged Intermediates and Promoting *CO Dimerization on Cu.

Copper-based materials exhibit significant potential as catalysts for electrochemical CO2 reduction, owing to their capacity to generate multicarbon hydrocarbons. The molecular functionalization of Cu electrodes represents a simple yet powerful strategy for improving the intrinsic activity of these materials by favoring specific reaction pathways through the creation of tailored microenvironments around the surface active sites. However, despite its success, comprehensive mechanistic insights derived from experimental techniques are often limited, leaving the active role of surface modifiers inconclusive. In this work, we show that N-heterocyclic carbene-carbodiimide-functionalized Cu catalysts display a remarkable activity for multicarbon product formation, surpassing bare Cu electrodes by more than an order of magnitude. These hybrid catalysts operate efficiently using an electrolyzer equipped with a gas diffusion electrode, achieving a multicarbon product selectivity of 58% with a partial current density of ca. -80 mA cm-2. We found that the activity for multicarbon product formation is closely linked to the surface charge that accumulates during electrocatalysis, stemming from surface intermediate buildup. Through X-ray photoelectron spectroscopy, we elucidated the role of the molecular additives in altering the electronic structure of the Cu electrodes, promoting the stabilization of surface CO. Additionally, in situ Raman measurements established the identity of the reaction intermediates that accumulate during electrocatalysis, indicating preferential CO binding on Cu step sites, known for facilitating C-C coupling. This study underscores the significant potential of molecular surface modifications in developing efficient electrocatalysts for CO2 reduction, highlighting surface charge as a pivotal descriptor of multicarbon product activity.

Electrocatalytic Depolymerization of Self-Immolative Poly(Dithiothreitol) Derivatives.

We report the use of electrogenerated anthraquinone radical anion (AQ•-) to trigger fast catalytic depolymerization of polymers derived from poly(dithiothreitol) (pDTT)-a self-immolative polymer (SIP) with a backbone of dithiothreitols connected with disulfide bonds and end-capped via disulfide bonds to pyridyl groups. The pDTT derivatives studied include polymers with simple thiohexyl end-caps or modified with AQ or methyl groups by Steglich esterification. All polymers were shown to be depolymerized using catalytic amounts of electrons delivered by AQ•-. For pDTT, as little as 0.2 electrons per polymer chain was needed to achieve complete depolymerization. We hypothesize that the reaction proceeds with AQ•- as an electron carrier (either molecularly or as a pendant group), which transfers an electron to a disulfide bond in the polymer in a dissociative manner, generating a thiyl radical and a thiolate. The rapid and catalytic depolymerization is driven by thiyl radicals attacking other disulfide bonds internally or between pDTT chains in a chain reaction. Electrochemical triggering works as a general method for initiating depolymerization of pDTT derivatives and may likely also be used for depolymerization of other disulfide polymers.

Challenges and Prospects in the Catalytic Conversion of Carbon Dioxide to Formaldehyde.

Formaldehyde (HCHO) is a crucial C1 building block for daily-life commodities in a wide range of industrial processes. Industrial production of HCHO today is based on energy- and cost-intensive gas-phase catalytic oxidation of methanol, which calls for exploring other and more sustainable ways of carrying out this process. Utilization of carbon dioxide (CO2 ) as precursor presents a promising strategy to simultaneously mitigate the carbon footprint and alleviate environmental issues. This Minireview summarizes recent progress in CO2 -to-HCHO conversion using hydrogenation, hydroboration/hydrosilylation as well as photochemical, electrochemical, photoelectrochemical, and enzymatic approaches. The active species, reaction intermediates, and mechanistic pathways are discussed to deepen the understanding of HCHO selectivity issues. Finally, shortcomings and prospects of the various strategies for sustainable reduction of CO2 to HCHO are discussed.

Promoting Selective Generation of Formic Acid from CO2 Using Mn(bpy)(CO)3Br as Electrocatalyst and Triethylamine/Isopropanol as Additives.

Urgent solutions are needed to efficiently convert the greenhouse gas CO2 into higher-value products. In this work, fac-Mn(bpy)(CO)3Br (bpy = 2,2'-bipyridine) is employed as electrocatalyst in reductive CO2 conversion. It is shown that product selectivity can be shifted from CO toward HCOOH using appropriate additives, i.e., Et3N along with iPrOH. A crucial aspect of the strategy is to outrun the dimer-generating parent-child reaction involving fac-Mn(bpy)(CO)3Br and [Mn(bpy)(CO)3]- and instead produce the Mn hydride intermediate. Preferentially, this is done at the first reduction wave to enable formation of HCOOH at an overpotential as low as 260 mV and with faradaic efficiency of 59 ± 1%. The latter may be increased to 71 ± 3% at an overpotential of 560 mV, using 2 M concentrations of both Et3N and iPrOH. The nature of the amine additive is crucial for product selectivity, as the faradaic efficiency for HCOOH formation decreases to 13 ± 4% if Et3N is replaced with Et2NH. The origin of this difference lies in the ability of Et3N/iPrOH to establish an equilibrium solution of isopropyl carbonate and CO2, while with Et2NH/iPrOH, formation of the diethylcarbamic acid is favored. According to density-functional theory calculations, CO2 in the former case can take part favorably in the catalytic cycle, while this is less opportune in the latter case because of the CO2-to-carbamic acid conversion. This work presents a straightforward procedure for electrochemical reduction of CO2 to HCOOH by combining an easily synthesized manganese catalyst with commercially available additives.

Dual-Responsive Material Based on Catechol-Modified Self-Immolative Poly(Disulfide) Backbones.

Functional materials engineered to degrade upon triggering are in high demand due their potentially lower impact on the environment as well as their use in sensing and in medical applications. Here, stimuli-responsive polymers are prepared by decorating a self-immolative poly(dithiothreitol) backbone with pendant catechol units. The highly functional polymer is fashioned into stimuli-responsive gels, formed through pH-dependent catecholato-metal ion cross-links. The gels degrade in response to specific environmental changes, either by addressing the pH responsive, non-covalent, catecholato-metal complexes, or by addition of a thiol. The latter stimulus triggers end-to-end depolymerization of the entire self-immolative backbone through end-cap replacement via thiol-disufide exchanges. Gel degradation is visualized by release of a dye from the supramolecular gel as it itself is converted into smaller molecules.

Are Amines the Holy Grail for Facilitating CO2 Reduction?

The selective and efficient reduction of carbon dioxide represents a key solution to producing non-fossil-fuel-based feedstocks for the chemical industry, while alleviating the increasing atmospheric concentration of this greenhouse gas. A variety of catalytic methods for the CO2 reduction reaction (CO2 RR) have been developed, including hydrogenations and electrochemical or photochemical reductions. For many of the most significant breakthroughs reported in the last decade, we realized that amines or closely related functional groups play a critical role for such transformations, and in several cases, are directly associated with the catalyst as a pendant group. Amines play multiple roles, such as CO2 trapping agents, proton shuttles, electron donors, or facilitators of CO2 reductions through formamide derivatives. In this Viewpoint, we compile some of these recent findings, and discuss their significance in a broader context in an attempt to provide guidelines for the design of new catalysts with enhanced activity and selectivity.

Low-Valence Znδ+ (0<δ<2) Single-Atom Material as Highly Efficient Electrocatalyst for CO2 Reduction.

A nitrogen-stabilized single-atom catalyst containing low-valence zinc atoms (Znδ+ -NC) is reported. It contains saturated four-coordinate (Zn-N4 ) and unsaturated three-coordinate (Zn-N3 ) sites. The latter makes Zn a low-valence state, as deduced from X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, electron paramagnetic resonance, and density functional theory. Znδ+ -NC catalyzes electrochemical reduction of CO2 to CO with near-unity selectivity in water at an overpotential as low as 310 mV. A current density up to 1 A cm-2 can be achieved together with high CO selectivity of >95 % using Znδ+ -NC in a flow cell. Calculations suggest that the unsaturated Zn-N3 could dramatically reduce the energy barrier by stabilizing the COOH* intermediate owing to the electron-rich environment of Zn. This work sheds light on the relationship among coordination number, valence state, and catalytic performance and achieves high current densities relevant for industrial applications.

Ligand-Controlled Product Selectivity in Electrochemical Carbon Dioxide Reduction Using Manganese Bipyridine Catalysts.

Electrocatalysis is a promising tool for utilizing carbon dioxide as a feedstock in the chemical industry. However, controlling the selectivity for different CO2 reduction products remains a major challenge. We report a series of manganese carbonyl complexes with elaborated bipyridine or phenanthroline ligands that can reduce CO2 to either formic acid, if the ligand structure contains strategically positioned tertiary amines, or CO, if the amine groups are absent in the ligand or are placed far from the metal center. The amine-modified complexes are benchmarked to be among the most active catalysts for reducing CO2 to formic acid, with a maximum turnover frequency of up to 5500 s-1 at an overpotential of 630 mV. The conversion even works at overpotentials as low as 300 mV, although through an alternative mechanism. Mechanistically, the formation of a Mn-hydride species aided by in situ protonated amine groups was determined to be a key intermediate by cyclic voltammetry, 1H NMR, DFT calculations, and infrared spectroelectrochemistry.

Carbon Isotope Labeling Strategy for ß-Amino Acid Derivatives via Carbonylation of Azanickellacycles.

A series of 4-membered azametallacycles have been prepared by the oxidative addition of Ni(0) with aziridines. Stoichiometric 13C-labeled carbon monoxide could be efficiently incorporated via Ni-C bond insertion to generate air stable and isolable cyclic Ni-acyl complexes. Upon subjection to a range of C-, N-, O-, and S-nucleophiles, 13C-labeled ß-amino acids and derivatives thereof, as well as ß-aminoketones, could be rapidly accessed. The methodology proved highly adaptable for the synthesis of the antidiabetic drug, sitagliptin, with a single carbon isotope label.

Access to ß-Ketonitriles through Nickel-Catalyzed Carbonylative Coupling of α-Bromonitriles with Alkylzinc Reagents.

Herein, we report a nickel-catalyzed carbonylative coupling of α-bromonitriles and alkylzinc reagents with near stoichiometric carbon monoxide to give ß-ketonitriles in good yields. The reaction is catalyzed by a readily available and stable nickel(II) pincer complex. The developed protocol tolerates substrates bearing a variety of functional groups, which would be problematic or incompatible with previous synthetic methods. Additionally, we demonstrate the suitability of the method for carbon isotope labeling by the synthesis of 13 C-labeled ß-ketonitriles and their transformation into isotopically labeled heterocycles.

Direct Access to Aryl Bis(trifluoromethyl)carbinols from Aryl Bromides or Fluorosulfates: Palladium-Catalyzed Carbonylation.

A palladium-catalyzed carbonylative approach for the direct conversion of (hetero)aryl bromides into their α,α-bis(trifluoromethyl)carbinols is described, and it employs only stoichiometric amounts of carbon monoxide and trifluoromethyltrimethylsilane. In addition, aryl fluorosulfates proved highly compatible with these reaction conditions. The method is tolerant of a diverse set of functional groups, and it is adaptable to late-stage carbon-isotope labeling.

Covalent Modification of Glassy Carbon Surfaces by Electrochemical Grafting of Aryl Iodides.

The reduction of an aryl iodide is generally believed to involve a clean-cut two-electron reduction to produce an aryl anion and iodide. This is in contradiction to what is observed if a highly efficient grafting agent, such as an aryldiazonium salt, is employed. The difference in behavior is explained by the much more extreme potentials required for reducing an aryl iodide, which facilitates the further reduction of the aryl radical formed as an intermediate. However, in this study we disclose that electrografting of aryl iodides is indeed possible upon extended voltammetric cycling. This implies that even if the number of aryl radicals left unreduced at the electrode surface is exceedingly small, a functionalization of the surface may still be promoted. In fact, the grafting efficiency is found to increase during the grafting process, which may be explained by the inhibiting effect the growing film exerts on the competing reduction of the aryl radical. The slow buildup of the organic film results in a well-ordered structure as shown by the well-defined electrochemical response from a grafted film containing ferrocenylmethyl groups. Hence, the reduction of aryl iodides allows a precisely controlled, albeit slow, growth of thin organic films.

Automated coating procedures to produce poly(ethylene glycol) brushes in fused-silica capillaries.

Many bioanalytical methods rely on electrophoretic separation of structurally labile and surface active biomolecules such as proteins and peptides. Often poor separation efficiency is due to surface adsorption processes leading to protein denaturation and surface fouling in the separation channel. Flexible and reliable approaches for preventing unwanted protein adsorption in separation science are thus in high demand. We therefore present new coating approaches based on an automated in-capillary surface-initiated atom transfer radical polymerization process (covalent coating) as well as by electrostatically adsorbing a presynthesized polymer leading to functionalized molecular brushes. The electroosmotic flow was measured following each step of the covalent coating procedure providing a detailed characterization and quality control. Both approaches resulted in good fouling resistance against the four model proteins cytochrome c, myoglobin, ovalbumin, and human serum albumin in the pH range 3.4-8.4. Further, even samples containing 10% v/v plasma derived from human blood did not show signs of adsorbing to the coated capillaries. The covalent as well as the electrostatically adsorbed coating were both found to be stable and provided almost complete suppression of the electroosmotic flow in the pH range 3.4-8.4. The coating procedures may easily be integrated in fully automated capillary electrophoresis methodologies.

Enhanced Catalytic Activity of Cobalt Porphyrin in CO2 Electroreduction upon Immobilization on Carbon Materials.

In a comparative study of the electrocatalytic CO2 reduction, cobalt meso-tetraphenylporphyrin (CoTPP) is used as a model molecular catalyst under both homogeneous and heterogeneous conditions. In the former case, employing N,N-dimethylformamide as solvent, CoTPP performs poorly as an electrocatalyst giving low product selectivity in a slow reaction at a high overpotential. However, upon straightforward immobilization of CoTPP onto carbon nanotubes, a remarkable enhancement of the electrocatalytic abilities is seen with CO2 becoming selectively reduced to CO (>90 %) at a low overpotential in aqueous medium. This effect is ascribed to the particular environment created by the aqueous medium at the catalytic site of the immobilized catalyst that facilitates the adsorption and further reaction of CO2 . This work highlights the significance of assessing an immobilized molecular catalyst from more than homogeneous measurements alone.

Functionalizing Arrays of Transferred Monolayer Graphene on Insulating Surfaces by Bipolar Electrochemistry.

Development of versatile methods for graphene functionalization is necessary before use in applications such as composites or as catalyst support. In this study, bipolar electrochemistry is used as a wireless functionalization method to graft 4-bromobenzenediazonium on large (10 × 10 mm(2)) monolayer graphene sheets supported on SiO2. Using this technique, transferred graphene can be electrochemically functionalized without the need of a metal support or the deposition of physical contacts. X-ray photoelectron spectroscopy and Raman spectroscopy are used to map the chemical changes and modifications of graphene across the individual sheets. Interestingly, the defect density is similar between samples, independent of driving potential, whereas the grafting density is increased upon increasing the driving potential. It is observed that the 2D nature of the electrode influences the electrochemistry and stability of the electrode compared to conventional electrografting using a three-electrode setup. On one side, the graphene will be blocked by the attached organic film, but the conductivity is also altered upon functionalization, which makes the graphene electrode different from a normal metal electrode. Furthermore, it is shown that it is possible to simultaneously modify an array of many small graphene electrodes (1 × 1 mm(2)) on SiO2.

Patterned Carboxylation of Graphene Using Scanning Electrochemical Microscopy.

A simple, direct, and versatile scanning electrochemical microscopy (SECM) approach for local carboxylation of multilayered graphene on nickel is demonstrated, in which carbon dioxide serves as the carboxylation agent under reductive conditions in N,N-dimethylformamide. The use of SECM gives control over both the spatial dimensions and the degree of carboxylation. While the pattern size, in general, is governed by the dimension of the SECM tip, the degree of modification, expressed as the surface coverage of carboxylate groups introduced at the graphene substrate, is found to be controlled by the electrolysis time. This is supported by electrochemical measurements, two-dimensional X-ray photoelectron spectroscopy, Raman spectroscopy mapping, and He ion microscopy. Surprisingly, intercalation of the supporting electrolyte in the multilayered graphene on nickel occurs to a relatively small extent when compared to corresponding results obtained in previously described carboxylations of this kind of multilayered graphene.

Organocatalyzed CO2 Trapping Using Alkynyl Indoles.

The first organocatalyzed trapping of CO2 through C-C and C-O bond formation is reported. Alkynyl indoles together with catalytic amounts of an organic base and five equivalents of CO2 resulted in the formation new heterocyclic structures. These tricyclic indole-containing products were successfully prepared under mild reaction conditions from aromatic, heteroaromatic, and aliphatic alkynyl indoles with complete regioselectivity. Further investigations suggest that C-C bond formation is the initial intermolecular step, followed by lactone-forming C-O bond formation.

Efficient fluoride-catalyzed conversion of CO2 to CO at room temperature.

A protocol for the efficient and selective reduction of carbon dioxide to carbon monoxide has been developed. Remarkably, this oxygen abstraction step can be performed with only the presence of catalytic cesium fluoride and a stoichiometric amount of a disilane in DMSO at room temperature. Rapid reduction of CO2 to CO could be achieved in only 2 h, which was observed by pressure measurements. To quantify the amount of CO produced, the reduction was coupled to an aminocarbonylation reaction using the two-chamber system, COware. The reduction was not limited to a specific disilane, since (Ph2MeSi)2 as well as (PhMe2Si)2 and (Me3Si)3SiH exhibited similar reactivity. Moreover, at a slightly elevated temperature, other fluoride salts were able to efficiently catalyze the CO2 to CO reduction. Employing a nonhygroscopic fluoride source, KHF2, omitted the need for an inert atmosphere. Substituting the disilane with silylborane, (pinacolato)BSiMe2Ph, maintained the high activity of the system, whereas the structurally related bis(pinacolato)diboron could not be activated with this fluoride methodology. Furthermore, this chemistry could be adapted to (13)C-isotope labeling of six pharmaceutically relevant compounds starting from Ba(13)CO3 in a newly developed three-chamber system.

Substituent effects and supramolecular interactions of titanocene(III) chloride: implications for catalysis in single electron steps.

The electrochemical properties of titanocene(III) complexes and their stability in THF in the presence and absence of chloride additives were studied by cyclic voltammetry (CV) and computational methods. The anodic peak potentials of the titanocenes can be decreased by as much as 0.47 V through the addition of an electron-withdrawing substituent (CO2Me or CN) to the cyclopentadienyl ring when compared with Cp2TiCl. For the first time, it is demonstrated that under the conditions of catalytic applications low-valent titanocenes can decompose by loss of the substituted ligand. The recently discovered effect of stabilizing titanocene(III) catalysts by chloride additives was analyzed by CV, kinetic, and computational studies. An unprecedented supramolecular interaction between [(C5H4R)2TiCl2](-) and hydrochloride cations through reversible hydrogen bonding is proposed as a mechanism for the action of the additives. This study provides the critical information required for the rational design of titanocene-catalyzed reactions in single electron steps.