RESUMEN
Achieving highly performant photoanodes for oxygen evolution is key to developing photoelectrochemical devices for solar water splitting. In this work, BiVO4 photoanodes are enhanced with a series of core-shell structured bimetallic nickel-cobalt phosphides (MPs), and key insights into the role of co-catalysts are provided. The best BiVO4 /Ni1.5 Co0.5 P and BiVO4 /Ni0.5 Co1.5 P photoanodes achieve a 3.5-fold increase in photocurrent compared with bare BiVO4 . It is discovered that this enhanced performance arises from a synergy between work function, catalytic activity, and capacitive ability of the MPs. Distribution of relaxation times analysis reveals that the contact between the MPs, BiVO4 , and the electrolyte gives rise to three routes for hole injection into the electrolyte, all of which are significantly improved by the presence of a second metal cation in the co-catalyst. Kinetic studies demonstrate that the significantly improved interfacial charge injection is due to a lower charge-transfer resistance, enhanced oxygen-evolution reaction kinetics, and larger surface hole concentrations, providing deeper insights into the carrier dynamics in these photoanode/co-catalyst systems for their rational design.
RESUMEN
Photocatalytic CO2 reduction plays a crucial role in advancing solar fuels, and enhancing the efficiency of the chosen photocatalysts is essential for sustainable energy production. This study demonstrates advancements in the performance of g-C3N4 as a photocatalyst achieved through surface modifications such as exfoliation to increase surface area and surface oxidation for improved charge separation. We also introduce reduced graphene oxide (rGO) in various ratios to both bulk and exfoliated g-C3N4, which effectively mitigates charge recombination and establishes an optimal ratio for enhanced efficiency. g-C3N4/rGO serves to fabricate a hybrid organic/inorganic heterojunction with Cs3Bi2Br9, resulting in a g-C3N4/rGO/Cs3Bi2Br9 composite. This leads to a remarkable increase in photocatalytic conversion of CO2 and H2O to CO, H2 and CH4 at rates of 54.3 (±2.0) µmole- g-1 h-1, surpassing that of pure Cs3Bi2Br9 (11.2 ± 0.4 µmole- g-1 h-1) and bulk g-C3N4 (5.5 ± 0.5 µmole- g-1 h-1). The experimentally determined energy diagram indicates that rGO acts as a solid redox mediator between g-C3N4 and Cs3Bi2Br9 in a Z-scheme heterojunction configuration, ensuring that the semiconductor (Cs3Bi2Br9) with the shallowest conduction band drives the reduction and the one with the deepest valence band (g-C3N4) drives the oxidation. The successful formation of this high-performance heterojunction underscores the potential of the developed composite as a photocatalyst for CO2 reduction, offering promising prospects for advancing the field of solar fuels and achieving sustainable energy goals.
RESUMEN
Halide perovskites exhibit exceptional optoelectronic properties for photoelectrochemical production of solar fuels and chemicals but their instability in aqueous electrolytes hampers their application. Here we present ultrastable perovskite CsPbBr3-based photoanodes achieved with both multifunctional glassy carbon and boron-doped diamond sheets coated with Ni nanopyramids and NiFeOOH. These perovskite photoanodes achieve record operational stability in aqueous electrolytes, preserving 95% of their initial photocurrent density for 168 h of continuous operation with the glassy carbon sheets and 97% for 210 h with the boron-doped diamond sheets, due to the excellent mechanical and chemical stability of glassy carbon, boron-doped diamond, and nickel metal. Moreover, these photoanodes reach a low water-oxidation onset potential close to +0.4 VRHE and photocurrent densities close to 8 mA cm-2 at 1.23 VRHE, owing to the high conductivity of glassy carbon and boron-doped diamond and the catalytic activity of NiFeOOH. The applied catalytic, protective sheets employ only earth-abundant elements and straightforward fabrication methods, engineering a solution for the success of halide perovskites in stable photoelectrochemical cells.
RESUMEN
Tin-lead (Sn-Pb) perovskite solar cells (PSCs) have gained interest as candidates for the bottom cell of all-perovskite tandem solar cells due to their broad absorption of the solar spectrum. A notable challenge arises from the prevalent use of the hole transport layer, PEDOT:PSS, known for its inherently high doping level. This high doping level can lead to interfacial recombination, imposing a significant limitation on efficiency. Herein, NaOH is used to dedope PEDOT:PSS, with the aim of enhancing the efficiency of Sn-Pb PSCs. Secondary ion mass spectrometer profiles indicate that sodium ions diffuse into the perovskite layer, improving its crystallinity and enlarging its grains. Comprehensive evaluations, including photoluminescence and nanosecond transient absorption spectroscopy, confirm that dedoping significantly reduces interfacial recombination, resulting in an open-circuit voltage as high as 0.90 V. Additionally, dedoping PEDOT:PSS leads to increased shunt resistance and high fill factor up to 0.81. As a result of these improvements, the power conversion efficiency is enhanced from 19.7% to 22.6%. Utilizing NaOH to dedope PEDOT:PSS also transitions its nature from acidic to basic, enhancing stability and exhibiting less than a 7% power conversion efficiency loss after 1176 h of storage in N2 atmosphere.
RESUMEN
The application of halide perovskites in the photoelectrochemical generation of solar fuels and feedstocks is hindered by the instability of perovskites in aqueous electrolytes and the use of expensive electrode and catalyst materials, particularly in photoanodes driving kinetically slow water oxidation. Here, solely earth-abundant materials are incorporated to fabricate a CsPbBr3 -based photoanode that reaches a low onset potential of +0.4 VRHE and 8 mA cm-2 photocurrent density at +1.23 VRHE for water oxidation, close to the radiative efficiency limit of CsPbBr3 . This photoanode retains 100% of its stabilized photocurrent density for more than 100 h of operation by replacing once the inexpensive graphite sheet upon signs of deterioration. The improved performance is due to an efficiently electrodeposited NiFeOOH catalyst on a protective self-adhesive graphite sheet, and enhanced charge transfer achieved by phase engineering of CsPbBr3 . Devices with >1 cm2 area, and low-temperature processing demonstrate the potential for low capital cost, stable, and scalable perovskite photoanodes.
RESUMEN
We report external bias driven switchable photocurrent (anodic and cathodic) in 2.3 eV indirect band gap perovskite (BiFeO3) photoactive thin films. Depending on the applied bias our BiFeO3 films exhibit photocurrents more usually found in p- or n-type semiconductor photoelectrodes. In order to understand the anomalous behaviour ambient photoemission spectroscopy and Kelvin-probe techniques have been used to determine the band structure of the BiFeO3. We found that the Fermi level (Ef) is at -4.96 eV (vs. vacuum) with a mid-gap at -4.93 eV (vs. vacuum). Our photochemically determined flat band potential (Efb) was found to be 0.3 V vs. NHE (-4.8 V vs. vacuum). These band positions indicate that Ef is close to mid-gap, and Efb is close to the equilibrium with the electrolyte enabling either cathodic or anodic band bending. We show an ability to control switching from n- to p-type behaviour through the application of external bias to the BiFeO3 thin film. This ability to control majority carrier dynamics at low applied bias opens a number of applications in novel optoelectronic switches, logic and energy conversion devices.
RESUMEN
Cu3TeO6 (CTO) has been synthesized by hydrothermal synthesis applying different pH values without any template or a calcination step to control the crystalline phase and the morphology of nanoparticles. The physicochemical properties characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, N2 adsorption, X-ray photoelectron spectroscopy, and diffuse reflectance ultraviolet-visible (DRUV-vis) spectroscopy techniques revealed that the pH values significantly influence the crystal growth. In acidic media (pH = 2), crystal growth has not been achieved. At pH = 4, the yield is low (10%), and the CTO presents irregular morphology. At pH = 6, the yield increases (up to 71%) obtaining an agglomeration of nanoparticles into spherical morphology. At basic conditions (pH = 8), the yield increases up to 90% and the morphology is the same as the sample obtained at pH = 6. At high basic conditions (pH = 10), the yield is similar (92%), although the morphology changes totally to dispersed nanoparticles. Importantly, the as-prepared CTO semiconductor presents photocatalytic activity for H2 production using triethanolamine as a sacrificial agent under visible light illumination. The results also revealed that the nanoparticles agglomerated in a spherical morphology with larger surface area presented almost double activities in H2 production compared to heterogeneously sized particles. These results highlight the suitable optoelectronic properties, including optical band gap, energy levels, and photoconductivity of CTO semiconductors for their use in photocatalytic H2 production.
RESUMEN
CO2 photocatalytic conversion into value-added fuels through solar energy is a promising way of storing renewable energy while simultaneously reducing the concentration of CO2 in the atmosphere. Lead-based halide perovskites have recently shown great potential in various applications such as solar cells, optoelectronics, and photocatalysis. Even though they show high performance, the high toxicity of Pb2+ along with poor stability under ambient conditions restrains the application of these materials in photocatalysis. In this respect, we developed an in situ assembly strategy to fabricate the lead-free double perovskite Cs2AgBiBr6 on a 2D bismuthene nanosheet prepared by a ligand-assisted reprecipitation method for a liquid-phase CO2 photocatalytic reduction reaction. The composite improved the production and selectivity of the eight-electron CH4 pathway compared with the two-electron CO pathway, storing more of the light energy harvested by the photocatalyst. The Cs2AgBiBr6/bismuthene composite shows a photocatalytic activity of 1.49(±0.16) µmol g-1 h-1 CH4, 0.67(±0.14) µmol g-1 h-1 CO, and 0.75(±0.20) µmol g-1 h-1 H2, with a CH4 selectivity of 81(±1)% on an electron basis with 1 sun. The improved performance is attributed to the enhanced charge separation and suppressed electron-hole recombination due to good interfacial contact between the perovskite and bismuthene promoted by the synthesis method.
RESUMEN
Lead-free halide perovskite derivative Cs3Bi2Br9 has recently been found to possess optoelectronic properties suitable for photocatalytic CO2 reduction reactions to CO. However, further work needs to be performed to boost charge separation for improving the overall efficiency of the photocatalyst. This report demonstrates the synthesis of a hybrid inorganic/organic heterojunction between Cs3Bi2Br9 and g-C3N4 at different ratios, achieved by growing Cs3Bi2Br9 crystals on the surface of g-C3N4 using a straightforward antisolvent crystallization method. The synthesized powders showed enhanced gas-phase photocatalytic CO2 reduction in the absence of hole scavengers of 14.22 (±1.24) µmol CO g-1 h-1 with 40 wt % Cs3Bi2Br9 compared with 1.89 (±0.72) and 5.58 (±0.14) µmol CO g-1 h-1 for pure g-C3N4 and Cs3Bi2Br9, respectively. Photoelectrochemical measurements also showed enhanced photocurrent in the 40 wt % Cs3Bi2Br9 composite, demonstrating enhanced charge separation. In addition, stability tests demonstrated structural stability upon the formation of a heterojunction, even after 15 h of illumination. Band structure alignment and selective metal deposition studies indicated the formation of a direct Z-scheme heterojunction between the two semiconductors, which boosted charge separation. These findings support the potential of hybrid organic/inorganic g-C3N4/Cs3Bi2Br9 Z-scheme photocatalyst for enhanced CO2 photocatalytic activity and improved stability.
RESUMEN
Polarons exist when charges are injected into organic semiconductors due to their strong coupling with the lattice phonons, significantly affecting electronic charge-transport properties. Understanding the formation and (de)localization of polarons is therefore critical for further developing organic semiconductors as a future electronics platform. However, there are very few studies reported in this area. In particular, there is no direct in situ monitoring of polaron formation and identification of its dependence on molecular structure and impact on electrical properties, limiting further advancement in organic electronics. Herein, how a minor modification of side-chain density in thiophene-based conjugated polymers affects the polaron formation via electrochemical doping, changing the polymers' electrical response to the surrounding dielectric environment for gas sensing, is demonstrated. It is found that the reduction in side-chain density results in a multistep polaron formation, leading to an initial formation of localized polarons in thiophene units without side chains. Reduced side-chain density also allows the formation of a high density of polarons with fewer polymer structural changes. More numerous but more localized polarons generate a stronger analyte response but without the selectivity between polar and non-polar solvents, which is different from the more delocalized polarons that show clear selectivity. The results provide important molecular understanding and design rules for the polaron formation and its impact on electrical properties.
RESUMEN
Narrowband photoresponsive molecules are highly coveted in high-resolution imaging, sensing, and monochromatic photodetection, especially those extending into the near-infrared (NIR) spectral range. Here, a new class of J-aggregating materials based on quinoidal indacenodithiophenes (IDTs) that exhibit an ultra-narrowband (full width half maxima of 22 nm) NIR absorption peak centered at 770 nm is reported. The spectral width is readily tuned by the length of the solubilizing alkyl group, with longer chains resulting in significant spectral narrowing. The J-aggregate behavior is confirmed by a combination of excited state lifetime measurements and single-crystal X-ray diffraction measurements. Their utility as electron-transporting materials is demonstrated in both transistor and phototransistor devices, with the latter demonstrating good response at NIR wavelengths (780 nm) over a range of intensities.
RESUMEN
PEDOT: PSS is widely used as a hole transport layer (HTL) in perovskite solar cells (PSCs) due to its facile processability, industrial scalability, and commercialization potential. However, PSCs utilizing PEDOT:PSS suffer from strong recombination losses compared to other organic HTLs. This results in lower open-circuit voltage (V OC) and power conversion efficiency (PCE). Most studies focus on doping PEDOT:PSS to improve charge extraction, but it has been suggested that a high doping level can cause strong recombination losses. Herein, we systematically dedope PEDOT:PSS with aqueous NaOH, raising its Fermi level by up to 500 meV, and optimize its layer thickness in p-i-n devices. A significant reduction of recombination losses at the dedoped PEDOT:PSS/perovskite interface is evidenced by a longer photoluminescence lifetime and higher magnitude of surface photovoltage, leading to an increased device V OC, fill factor, and PCE. These results provide insights into the relationship between doping level of HTLs and interfacial charge carrier recombination losses.
RESUMEN
Copper(I) thiocyanate (CuSCN) is a stable, low-cost, solution-processable p-type inorganic semiconductor used in numerous optoelectronic applications. Here, for the first time, we employ the time-of-flight (ToF) technique to measure the out-of-plane hole mobility of CuSCN films, enabled by the deposition of 4 µm-thick films using aerosol-assisted chemical vapor deposition (AACVD). A hole mobility of â¼10-3 cm2/V s was measured with a weak electric field dependence of 0.005 cm/V1/2. Additionally, by measuring several 1.5 µm CuSCN films, we show that the mobility is independent of thickness. To further validate the suitability of our AACVD-prepared 1.5 µm-thick CuSCN film in device applications, we demonstrate its incorporation as a hole transport layer (HTL) in methylammonium lead iodide (MAPbI3) perovskite solar cells (PSCs). Our AACVD films result in devices with measured power conversion efficiencies of 10.4%, which compares favorably with devices prepared using spin-coated CuSCN HTLs (12.6%), despite the AACVD HTLs being an order of magnitude thicker than their spin-coated analogues. Improved reproducibility and decreased hysteresis were observed, owing to a combination of excellent film quality, high charge-carrier mobility, and favorable interface energetics. In addition to providing a fundamental insight into charge-carrier mobility in CuSCN, our work highlights the AACVD methodology as a scalable, versatile tool suitable for film deposition for use in optoelectronic devices.
RESUMEN
Blue organic light-emitting diodes require high triplet interlayer materials, which induce large energetic barriers at the interfaces resulting in high device voltages and reduced efficiencies. Here, we alleviate this issue by designing a low triplet energy hole transporting interlayer with high mobility, combined with an interface exciplex that confines excitons at the emissive layer/electron transporting material interface. As a result, blue thermally activated delay fluorescent organic light-emitting diodes with a below-bandgap turn-on voltage of 2.5 V and an external quantum efficiency (EQE) of 41.2% were successfully fabricated. These devices also showed suppressed efficiency roll-off maintaining an EQE of 34.8% at 1000 cd m-2. Our approach paves the way for further progress through exploring alternative device engineering approaches instead of only focusing on the demanding synthesis of organic compounds with complex structures.
RESUMEN
Increasing the open-circuit voltage (Voc) is one of the key strategies for further improvement of the efficiency of perovskite solar cells. It requires fundamental understanding of the complex optoelectronic processes related to charge carrier generation, transport, extraction, and their loss mechanisms inside a device upon illumination. Herein, we report the important origin of Voc losses in methylammonium lead iodide perovskite (MAPI)-based solar cells, which results from undesirable positive charge (hole) accumulation at the interface between the perovskite photoactive layer and the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) hole-transport layer. We show strong correlation between the thickness-dependent surface photovoltage and device performance, unraveling that the interfacial charge accumulation leads to charge carrier recombination and results in a large decrease in Voc for the PEDOT:PSS/MAPI inverted devices (180 mV reduction in 50 nm thick device compared to 230 nm thick one). In contrast, accumulated positive charges at the TiO2/MAPI interface modify interfacial energy band bending, which leads to an increase in Voc for the TiO2/MAPI conventional devices (70 mV increase in 50 nm thick device compared to 230 nm thick one). Our results provide an important guideline for better control of interfaces in perovskite solar cells to improve device performance further.
RESUMEN
Metal halide perovskites (MHPs) have emerged as promising materials for light-emitting diodes owing to their narrow emission spectrum and wide range of color tunability. However, the low exciton binding energy in MHPs leads to a competition between the trap-mediated nonradiative recombination and the bimolecular radiative recombination. Here, efficient and stable green emissive perovskite light-emitting diodes (PeLEDs) with an external quantum efficiency of 14.6% are demonstrated through compositional, dimensional, and interfacial modulations of MHPs. The interfacial energetics and optoelectronic properties of the perovskite layer grown on a nickel oxide (NiO x ) and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate hole injection interfaces are investigated. The better interface formed between the NiO x /perovskite layers in terms of lower density of traps/defects, as well as more balanced charge carriers in the perovskite layer leading to high recombination yield of carriers are the main reasons for significantly improved device efficiency, photostability of perovskite, and operational stability of PeLEDs.
RESUMEN
Chitosan and bilayered--Rhodamine 6G impregnated silica-chitosan--coatings (300-3000 nm thick) were prepared and investigated as a model for controlled drug release. Properties of native, ionically (sodium triphosphate) and covalently (glutaraldehyde) cross-linked layers of chitosan in contact with aqueous phase (modeling human blood pH of ca. 7.3) were investigated. The cross-linking was confirmed by attenuated total reflection (ATR) Fourier transform infrared (FTIR), energy-dispersive spectroscopy (EDS) and solid state (13)C nuclear magnetic resonance (NMR) spectroscopy. The evolution of advancing water contact angles as a function of time was measured, and from the results restricted mobility of polymer segments in the interfacial layer of cross-linked chitosan coatings were assumed. Spectroscopic ellipsometry measurements showed that covalent cross-linking leads to a lowered, while ionic cross-linking to an increased swelling degree of chitosan layers. Despite the swelling behavior both cross-linked chitosan layers showed significant retard effect on dye release from the bilayered coatings.