RESUMEN
Controlling the orientation of complex molecules in molecular junctions is crucial to their development into functional devices. To date, this has been achieved through the use of multipodal compounds (i.e., containing more than two anchoring groups), resulting in the formation of tri/tetrapodal compounds. While such compounds have greatly improved orientation control, this comes at the cost of lower surface coverage. In this study, we examine an alternative approach for generating multimodal compounds by binding multiple independent molecular wires together through metal coordination to form a molecular bundle. This was achieved by coordinating iron(II) and cobalt(II) to 5,5'-bis(methylthio)-2,2'-bipyridine (L1) and (methylenebis(4,1-phenylene))bis(1-(5-(methylthio)pyridin-2-yl)methanimine) (L2) to give two monometallic complexes, Fe-1 and Co-1, and two bimetallic helicates, Fe-2 and Co-2. Using XPS, all of the complexes were shown to bind to a gold surface in a fac fashion through three thiomethyl groups. Using single-molecule conductance and DFT calculations, each of the ligands was shown to conduct as an independent wire with no impact from the rest of the complex. These results suggest that this is a useful approach for controlling the geometry of junction formation without altering the conductance behavior of the individual molecular wires.
RESUMEN
OBJECTIVES: To compare the epidemiology and antimicrobial susceptibility patterns of Streptococcus pneumoniae collected from respiratory and blood culture samples in Canada between 2007 and 2016. METHODS: S. pneumoniae strains were obtained from Canadian hospitals as part of the ongoing national surveillance study, CANWARD. Isolates were serotyped using the Quellung method. Antimicrobial susceptibility testing was performed using the CLSI broth microdilution method. MDR and XDR were defined as resistance to three or more and five or more classes of antimicrobials, respectively. RESULTS: Of the 2581 S. pneumoniae isolates collected, 1685 (65.3%) and 896 (34.7%) were obtained from respiratory and blood samples, respectively. Respiratory isolates demonstrated lower rates of antimicrobial susceptibility than blood isolates to penicillin, ceftriaxone, clarithromycin, clindamycin, doxycycline and trimethoprim/sulfamethoxazole (Pâ≤â0.03). From 2007 to 2016, invasive isolates demonstrated trends towards increasing penicillin susceptibility and decreasing clarithromycin susceptibility. MDR was significantly higher in respiratory S. pneumoniae compared with blood (9.1% versus 4.5%, Pâ<â0.0001). Serotypes 11A, 16F, 19F, 23A/B/F, 34, 35B and non-typeable strains were more commonly isolated from respiratory specimens, while 4, 5, 7F, 8, 12F, 14 and 19A were more commonly invasive serotypes. Numerous serotypes, including 3 and 22F, were isolated frequently from both specimen sources. CONCLUSIONS: S. pneumoniae from respiratory samples demonstrated lower antimicrobial susceptibilities and higher MDR in a greater diversity of serotypes than isolates obtained from blood. Many serotypes were associated with one specific specimen source, while others were associated with both; genetic characterization is necessary to elucidate the specific factors influencing the ability of these serotypes to commonly cause both invasive and non-invasive disease.
Asunto(s)
Antibacterianos/farmacología , Bacteriemia/microbiología , Farmacorresistencia Bacteriana , Infecciones Neumocócicas/microbiología , Infecciones del Sistema Respiratorio/microbiología , Streptococcus pneumoniae/efectos de los fármacos , Adolescente , Adulto , Anciano , Bacteriemia/epidemiología , Cultivo de Sangre , Canadá/epidemiología , Femenino , Hospitales , Humanos , Masculino , Pruebas de Sensibilidad Microbiana , Persona de Mediana Edad , Infecciones Neumocócicas/epidemiología , Infecciones del Sistema Respiratorio/epidemiología , Serogrupo , Streptococcus pneumoniae/inmunología , Streptococcus pneumoniae/aislamiento & purificación , Adulto JovenRESUMEN
Candida albicans is an important opportunistic pathogen causing various human infections that are often treated with azole antifungals. The U.S. CDC now regards developing candidal antifungal resistance as a threat, creating a need for new and more effective antifungal treatments. Iron is an essential nutrient for all living cells, and there is growing evidence that interference with iron homeostasis of C. albicans can improve its response to antifungals. This study was aimed at establishing whether withholding iron by currently used medical iron chelators and the novel chelator DIBI could restrict growth and also enhance the activity of azoles against clinical isolates of C. albicans DIBI, but not deferoxamine or deferiprone, inhibited the growth of C. albicans at relatively low concentrations in vitro, and this inhibition was reversed by iron addition. DIBI in combination with various azoles demonstrated stronger growth inhibition than the azoles alone and greatly prolonged the inhibition of cell multiplication. In addition, the administration of DIBI along with fluconazole (FLC) to mice inoculated with an FLC-sensitive isolate in a model of experimental C. albicans vaginitis showed a markedly improved clearance of infection. These results suggest that iron chelation by DIBI has the potential to enhance azole efficacy for the treatment of candidiasis.
Asunto(s)
Antifúngicos/uso terapéutico , Azoles/uso terapéutico , Candida albicans/efectos de los fármacos , Candida albicans/patogenicidad , Animales , Candida/efectos de los fármacos , Candida/patogenicidad , Deferiprona/uso terapéutico , Deferoxamina/uso terapéutico , Modelos Animales de Enfermedad , Farmacorresistencia Fúngica , Sinergismo Farmacológico , Femenino , Ratones , VaginitisRESUMEN
A series of trans-RuL(PPh3)2(nitrile) and {RuL(PPh3)2}.2-µ-(nitrile)-based complexes [where L = 2,2'-(3,4-diphenyl-pyrrole-2,5-diyl)dipyridine (dpp), di(pyridin-2-yl)isoindoline-1,3-diimine (bpi), or 4-(4-methoxyphenyl)-6-phenyl-2,2'-bipyridine (Pbpy); and nitrile = 1,4-dibenzontirile, 4-ethynylbenzonitrile, or dicyanamide] were synthesized and characterized, and their electrochemical and photochemical behaviors were investigated. Those complexes that contained a significant nitrile contribution to their 3MLLCT show a release of their nitrile ligand (when L = dpp or Pbpy and the nitrile ligand = 4-dibenzontirile, or 4-ethynylbenzonitrile) with dissociation constants up to 8.09 × 10-4 s-1.
RESUMEN
The desire to continually reduce the lower limits of semiconductor integrated circuit (IC) fabrication methods continues to inspire interest in unimolecular electronics as a platform technology for the realization of future (opto)electronic devices. However, despite successes in developing methods for the construction and measurement of single-molecule and large-area molecular junctions, exercising control over the precise junction geometry remains a significant challenge. Here, host-guest complexes of the wire-like viologen derivative 1,1'-bis(4-(methylthio)-phenyl)-[4,4'-bipyridine]-1,1'-diium chloride ([1][Cl]2) and cucurbit[7]uril (CB[7]) have been self-assembled in a regular pattern over a gold substrate. Subsequently, ligandless gold nanoparticles (AuNPs) synthesized in situ are deposited over the host-guest array. The agreement between the conductance of individual mono-molecular junctions, appropriately chosen as a function of the AuNP diameter, within this array determined by conductive probe atomic force microscope (c-AFM) and true single-molecule measurements for a closely similar host-guest complex within a scanning tunneling microscope break-junction (STM-BJ) indicates the formation of molecular junctions derived from these host-guest complexes without deleterious intermolecular coupling effects.
RESUMEN
Antigen-based rapid diagnostic tests (Ag-RDTs) were widely deployed to enhance SARS-CoV-2 testing capacity during the COVID-19 pandemic. Consistent with national guidance for low prevalence settings, positive Ag-RDTs were confirmed using nucleic acid amplification tests (NAATs) to avoid false positive results. However, increasing demands for positive Ag-RDT confirmation competed with other testing priorities in clinical laboratories. This work hypothesized that real-time RT-PCR without nucleic acid extraction (NAE) would be sufficiently sensitive to support positive Ag-RDT confirmation. Ag-RDT and NAAT results from community-based asymptomatic testing sites prior to the omicron variant wave were compared to calculate the weekly false positive rate (FPR) and false detection rate (FDR). Real-time RT-PCR was compared with and without NAE using 752 specimens previously tested positive for SARS-CoV-2 using commercial NAATs and 344 specimens from Ag-RDT-positive individuals. The impact of SARS-CoV-2 prevalence on laboratory resources required to sustain Ag-RDT confirmation was modeled for the RT-PCR with and without NAE. Overall, FPR was low [0.07% (222/330,763)] in asymptomatic testing sites, but FDR was high [30.7% (222/724)]. When RT-PCR was compared with and without NAE, 100% concordance was obtained with NAAT-positive specimens, including those from Ag-RDT-positive individuals. NAE-free RT-PCR significantly reduced time to results, human resources, and overall costs. A 30.7% FDR reaffirms the need for NAAT-based confirmation of positive Ag-RDT results during low SARS-CoV-2 prevalence. NAE-free RT-PCR was shown to be a simple and cost-sparing NAAT-based solution for positive Ag-RDT confirmation, and its implementation supported data-driven broader Ag-RDT deployment into communities, workplaces, and households. IMPORTANCE: Rapid antigen testing for SARS-CoV-2 was widely deployed during the COVID-19 pandemic. In settings of low prevalence, national guidance recommends that positive antigen test results be confirmed with molecular testing. Given the high testing burden on clinical laboratories during the COVID-19 pandemic, the high volume of positive antigen tests submitted for confirmatory testing posed challenges for laboratory workflow. This study demonstrated that a simple PCR method without prior nucleic acid purification is an accurate and cost-effective solution for positive rapid antigen test confirmation. Implementing this method allowed molecular confirmatory testing for positive antigen tests to be sustained as antigen testing was expanded into large populations such as workplaces, schools, and households.
Asunto(s)
Antígenos Virales , COVID-19 , SARS-CoV-2 , Humanos , COVID-19/diagnóstico , COVID-19/epidemiología , SARS-CoV-2/genética , SARS-CoV-2/inmunología , SARS-CoV-2/aislamiento & purificación , Sensibilidad y Especificidad , Prevalencia , Reacciones Falso Positivas , Prueba Serológica para COVID-19/métodos , Prueba de Ácido Nucleico para COVID-19/métodos , Técnicas de Amplificación de Ácido Nucleico/métodos , Reacción en Cadena en Tiempo Real de la Polimerasa/métodosRESUMEN
Thermoelectric materials have garnered significant interest for their potential to efficiently convert waste heat into electrical energy at room temperature without moving parts or harmful emissions. This study investigated the impact of the HOMO-LUMO (H-L) gap on the thermoelectric properties of three distinct classes of organic compounds: conjugated aromatics (isoindigos (IIGs)), quinoidal molecules (benzodipyrrolidones (BDPs)), and donor-acceptor systems (bis(pyrrol-2-yl)squaraines (BPSs)). These compounds were chosen for their structural simplicity and linear π-conjugated conductance paths, which promote high electrical conductance and minimize complications from quantum interference. Single-molecule thermoelectric measurements revealed that despite their low H-L gaps, the Seebeck coefficients of these compounds remain low. The alignment of the frontier orbitals relative to the Fermi energy was found to play a crucial role in determining the Seebeck coefficients, as exemplified by the BDP compounds. Theoretical calculations support these findings and suggest that anchor group selection could further enhance the thermoelectric behavior of these types of molecules.
RESUMEN
OBJECTIVES: The purpose of this study was to describe the association between age groups and antimicrobial resistance in the most commonly identified pathogens in Canadian hospitals. METHODS: Between 2007 and 2011, 27,123 clinically significant isolates, comprising 3580 isolates from children ≤ 18 years old, 12,119 isolates from adults 19-64 years old and 11,424 isolates from elderly patients aged ≥ 65 years old, were collected as part of the CANWARD surveillance study from tertiary-care centres across Canada. Antimicrobial susceptibility testing was performed according to CLSI guidelines. A multifactorial logistic regression model was used to determine the impact of demographic factors, including age groups, on antimicrobial resistance. RESULTS: Staphylococcus aureus, Escherichia coli, Streptococcus pneumoniae and Pseudomonas aeruginosa were in the top five organisms for all of the age groups. The proportions of S. aureus that were methicillin resistant, enterococci that were vancomycin resistant and E. coli that produced extended-spectrum ß-lactamases were 11.2%, 0.7% and 1.0% for children, 22.8%, 4.6% and 4.3% for adults, and 28.0%, 3.8% and 4.9% for the elderly, respectively. Notable age-related differences in antimicrobial resistance patterns included the following: significantly less methicillin, clindamycin, clarithromycin and trimethoprim/sulfamethoxazole resistance in S. aureus from children; for E. coli, higher cefazolin and ciprofloxacin resistance in the elderly and less ceftriaxone, ciprofloxacin and gentamicin resistance in isolates from children; more S. pneumoniae isolates with penicillin MICs >1 mg/L in children; and for P. aeruginosa, higher resistance rates for meropenem, ciprofloxacin and levofloxacin in adults. CONCLUSIONS: The assessment of antimicrobial susceptibility patterns by age group revealed that resistance rates are often higher in the older age groups; however, considerable variability in age-specific resistance trends for different pathogen-antimicrobial combinations was noted.
Asunto(s)
Infección Hospitalaria/epidemiología , Infección Hospitalaria/microbiología , Farmacorresistencia Microbiana , Adolescente , Adulto , Factores de Edad , Anciano , Anciano de 80 o más Años , Antibacterianos/farmacología , Bacterias/clasificación , Bacterias/efectos de los fármacos , Bacterias/aislamiento & purificación , Infecciones Bacterianas/epidemiología , Infecciones Bacterianas/microbiología , Canadá/epidemiología , Niño , Preescolar , Humanos , Lactante , Recién Nacido , Pruebas de Sensibilidad Microbiana , Persona de Mediana Edad , Serotipificación , Adulto JovenRESUMEN
The structures of a series of tetracoordinate beryllium(II) complexes with ligands derived from tertiary-substituted amines have been computationally modeled and their (9)Be magnetic shielding values determined using the gauge-including atomic orbital (GIAO) method at the 6-311++g(2d,p) level. A good correlation was observed between calculated (9)Be NMR chemical shifts when compared to experimental values in polar protic solvents, less so for the values recorded in polar aprotic solvents. A number of alternative complex structures were modeled, resulting in an improvement in experimental versus computational (9)Be NMR chemical shifts, suggesting that in some cases full encapsulation on the beryllium atom was not occurring. Several of the synthesized complexes gave rise to unexpected fluorescence, and inspection of the calculated molecular orbital diagrams associated with the electronic transitions suggested that the rigidity imparted by the locking of certain conformations upon Be(II) coordination allowed delocalization across adjacent aligned aromatic rings bridged by Be(II).
RESUMEN
The environment surrounding a molecular junction affects its charge-transport properties and, therefore, must be chosen with care. In the case of measurements in liquid media, the solvent must provide good solvation, grant junction stability, and, in the case of electrolyte gating experiments, allow efficient electrical coupling to the gate electrodes through control of the electrical double layer. We evaluated in this study the deep eutectic solvent mixture (DES) ethaline, which is a mixture of choline chloride and ethylene glycol (1:2), for single-molecule junction fabrication with break-junction techniques. In ethaline, we were able to (i) measure challenging and poorly soluble molecular wires, exploiting the improved solvation capabilities offered by DESs, and (ii) efficiently apply an electrostatic gate able to modulate the conductance of the junction by approximately an order of magnitude within a â¼1 V potential window. The electrochemical gating results on a Au-VDP-Au junction follow exceptionally well the single-level modeling with strong gate coupling (where VDP is 1,2-di(pyridine-4-yl)ethene). Ethaline is also an ideal solvent for the measurement of very short molecular junctions, as it grants a greatly reduced snapback distance of the metallic electrodes upon point-contact rupture. Our work demonstrates that DESs are viable alternatives to often relatively expensive ionic liquids, offering good versatility for single-molecule electrical measurements.
RESUMEN
The present work provides an insight into the effect of connectivity isomerization of metal-2,2'-bipyridine complexes. For that purpose, two new 2,2'-bipyridine (bpy) ligand systems, 4,4'-bis(4-(methylthio)phenyl)-2,2'-bipyridine (Lmeta) and 5,5'-bis(3,3-dimethyl-2,3-dihydrobenzothiophen-5-yl)-2,2'-bipyridine (Lpara) were synthesized and coordinated to rhenium and manganese to obtain the corresponding complexes MnLmeta(CO)3Br, ReLmeta(CO)3Br, MnLpara(CO)3Br, MoLpara(CO)4 and ReLpara(CO)3Br. The experimental and theoretical results revealed that coordination to the para system, i.e., the metal ion peripheral to the conductance path, gave a slightly increased conductance compared to the free ligand attributed to the reduced highest occupied molecular orbital (HOMO)-least unoccupied molecular orbital (LUMO) gap. The meta-based system formed a destructive quantum interference feature that reduced the conductance of a S···S contacted junction to below 10-5.5Go, reinforcing the importance of contact group connectivity for molecular wire conductance.
RESUMEN
Two new cyclotriphosphazene ligands with pendant 2,2':6',2â³-terpyridine (Terpy) moieties, namely, (pentaphenoxy){4-[2,6-bis(2-pyridyl)]pyridoxy}cyclotriphosphazene (L(1)), (pentaphenoxy){4-[2,6-terpyridin-4-yl]phenoxy}cyclotriphosphazene (L(2)), and their respective polymeric analogues, L(1P) and L(2P), were synthesized. These ligands were used to form iron(II) complexes with an Fe(II)Terpy(2) core. Variable-temperature resonance Raman, UV-visible, and Mössbauer spectroscopies with magnetic measurements aided by density functional theory calculations were used to understand the physical characteristics of the complexes. By a comparison of measurements, the polymers were shown to behave in the same way as the cyclotriphosphazene analogues. The results showed that spin crossover (SCO) can be induced to start at high temperatures by extending the spacer length of the ligand to that in L(2) and L(2P); this combination provides a route to forming a malleable SCO material.
RESUMEN
Bis-heteroleptic cyclometalated iridium complexes of the form Ir(La)2(acac), where La is a substituted 2-phenylpyridine derivative and acac is an acetylacetonato ligand, are a useful class of luminescent organometallic complexes for a range of applications. Related tris-heteroleptic complexes of the form Ir(La)(Lb)(acac) offer the potential advantage of greater functionality through the use of two different cyclometalated ligands but are, in general, more difficult to obtain. We report the synthesis of divergent bis- and tris-heteroleptic triisopropylsilylethynyl-substituted intermediate complexes that can be diversified using a "chemistry-on-the-complex" approach. We demonstrate the methodology through one-pot deprotection and Sonogashira cross-coupling of the intermediate complexes with para-R-aryliodides (R = H, SMe, and CN). The photophysical and electrochemical behaviors of the resultant bis- and tris-heteroleptic complexes are compared, and it is shown that the tris-heteroleptic complexes exhibit subtly different emission and redox properties to the bis-heteroleptic complexes, such as further red-shifted emission maxima and lower extinction coefficients, which can be attributed to the reduced symmetry. It is demonstrated, supported by DFT and time-dependent DFT calculations, that the charge-transfer character of the emission can be altered via variation of the terminal substituent; the introduction of an electron-withdrawing cyano group in the terminal position leads to a significant red shift, while the introduction of an SMe group can substantially increase the emission quantum yield. Most notably, this convenient synthetic approach reduces the need to perform the often challenging isolation of tris-heteroleptic complexes to a single divergent intermediate, which will simplify access to families of complexes of the form Ir(La)(Lb)(acac).
RESUMEN
Antigen-based rapid diagnostic tests (Ag-RDTs) have been widely used for the detection of SARS-CoV-2 during the coronavirus disease 2019 (COVID-19) pandemic. In settings of low disease prevalence, such as asymptomatic community testing, national guidelines recommend confirmation of positive Ag-RDT results with a nucleic acid amplification test (NAAT). This often requires patients to be recalled for repeat specimen recollection and subsequent testing in reference laboratories. This project assessed the use of a point-of-care molecular NAAT for SARS-CoV-2 detection (i.e., ID NOW), which was performed on-site at a volunteer-led asymptomatic community testing site on the residual test buffer (RTB) from positive Ag-RDTs. The ID NOW NAAT assay was performed on RTB from two Ag-RDTs: the Abbott Panbio and BTNX Rapid Response assays. Results of ID NOW were compared to real-time RT-PCR at a reference laboratory. Along with investigations into the clinical performance of ID NOW on RTB, analytical specificity was assessed with a panel of various respiratory organisms. Of the Ag-RDTs results evaluated, all 354 Ag-RDTs results characterized as true positives by RT-PCR were accurately identified with ID NOW testing of RTB. No SARS-CoV-2 detections by ID NOW were observed from 10 specimens characterized as false-positive Ag-RDTs, or from contrived specimens with various respiratory organisms. The use of on-site molecular testing on RTB provides a suitable option for rapid confirmatory testing of positive Ag-RDTs, thereby obviating the need for specimen recollection for molecular testing at local reference laboratories. IMPORTANCE During the COVID-19 pandemic, rapid antigen tests have been widely used for the detection of SARS-CoV-2. These simple devices allow rapid test results. However, false-positive results may occur. As such, individuals with positive rapid tests often must return to testing centers to have a second swab collected, which is then transported to a specialized laboratory for confirmation using molecular tests. As an alternative to requiring a repeat visit and a prolonged turn-around time for result confirmation, this project evaluated whether the leftover material from rapid antigen tests could be confirmed directly on a portable point-of-care molecular instrument. Using this approach, molecular confirmation of positive antigen tests could be performed in less than 15 min, and the results were equivalent to laboratory-based confirmation. This procedure eliminates the need for individuals to return to testing centers following a positive rapid antigen test and ensures accurate antigen test results through on-site confirmation.
Asunto(s)
COVID-19 , Pandemias , COVID-19/diagnóstico , Humanos , Técnicas de Diagnóstico Molecular/métodos , Sistemas de Atención de Punto , SARS-CoV-2/genética , Sensibilidad y EspecificidadRESUMEN
Antigen-based rapid diagnostics tests (Ag-RDTs) are useful tools for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) detection. However, misleading demonstrations of the Abbott Panbio coronavirus disease 2019 (COVID-19) Ag-RDT on social media claimed that SARS-CoV-2 antigen could be detected in municipal water and food products. To offer a scientific rebuttal to pandemic misinformation and disinformation, this study explored the impact of using the Panbio SARS-CoV-2 assay with conditions falling outside manufacturer recommendations. Using Panbio, various water and food products, laboratory buffers, and SARS-CoV-2-negative clinical specimens were tested with and without manufacturer buffer. Additional experiments were conducted to assess the role of each Panbio buffer component (tricine, NaCl, pH, and Tween 20) as well as the impact of temperature (4°C, 20°C, and 45°C) and humidity (90%) on assay performance. Direct sample testing (without the kit buffer) resulted in false-positive signals resembling those obtained with SARS-CoV-2 positive controls tested under proper conditions. The likely explanation of these artifacts is nonspecific interactions between the SARS-CoV-2-specific conjugated and capture antibodies, as proteinase K treatment abrogated this phenomenon, and thermal shift assays showed pH-induced conformational changes under conditions promoting artifact formation. Omitting, altering, and reverse engineering the kit buffer all supported the importance of maintaining buffering capacity, ionic strength, and pH for accurate kit function. Interestingly, the Panbio assay could tolerate some extremes of temperature and humidity outside manufacturer claims. Our data support strict adherence to manufacturer instructions to avoid false-positive SARS-CoV-2 Ag-RDT reactions, otherwise resulting in anxiety, overuse of public health resources, and dissemination of misinformation. IMPORTANCE With the Panbio severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antigen test being deployed in over 120 countries worldwide, understanding conditions required for its ideal performance is critical. Recently on social media, this kit was shown to generate false positives when manufacturer recommendations were not followed. While erroneous results from improper use of a test may not be surprising to some health care professionals, understanding why false positives occur can help reduce the propagation of misinformation and provide a scientific rebuttal for these aberrant findings. This study demonstrated that the kit buffer's pH, ionic strength, and buffering capacity were critical components to ensure proper kit function and avoid generation of false-positive results. Typically, false positives arise from cross-reacting or interfering substances; however, this study demonstrated a mechanism where false positives were generated under conditions favoring nonspecific interactions between the two antibodies designed for SARS-CoV-2 antigen detection. Following the manufacturer instructions is critical for accurate test results.
Asunto(s)
Antígenos Virales/análisis , Prueba Serológica para COVID-19/métodos , Agua Potable/virología , Alimentos/virología , SARS-CoV-2/aislamiento & purificación , Tampones (Química) , COVID-19/diagnóstico , Comunicación , Reacciones Falso Positivas , Humanos , SARS-CoV-2/inmunologíaRESUMEN
Indium tin oxide (ITO) is an attractive substrate for single-molecule electronics since it is transparent while maintaining electrical conductivity. Although it has been used before as a contacting electrode in single-molecule electrical studies, these studies have been limited to the use of carboxylic acid terminal groups for binding molecular wires to the ITO substrates. There is thus the need to investigate other anchoring groups with potential for binding effectively to ITO. With this aim, we have investigated the single-molecule conductance of a series of eight tolane or "tolane-like" molecular wires with a variety of surface binding groups. We first used gold-molecule-gold junctions to identify promising targets for ITO selectivity. We then assessed the propensity and selectivity of carboxylic acid, cyanoacrylic acid, and pyridinium-squarate to bind to ITO and promote the formation of molecular heterojunctions. We found that pyridinium squarate zwitterions display excellent selectivity for binding to ITO over gold surfaces, with contact resistivity comparable to that of carboxylic acids. These single-molecule experiments are complemented by surface chemical characterization with X-ray photoelectron spectroscopy, quartz crystal microbalance, contact angle determination, and nanolithography using an atomic force miscroscope. Finally, we report the first density-functional theory calculations involving ITO electrodes to model charge transport through ITO-molecule-gold heterojunctions.
Asunto(s)
Electrónica , Compuestos de Estaño , Conductividad Eléctrica , ElectrodosRESUMEN
Rapid methods for the detection and confirmatory identification of pandemic influenza A virus (also known as pandemic [H1N1] 2009) are of utmost importance. In this study, a conventional reverse transcriptase PCR (RT-PCR) assay for the detection of influenza A virus and the hemagglutinin of swine lineage H1 (swH1) was designed, optimized, and validated. Nucleic acids were extracted from 198 consecutive nasopharyngeal, nasal, or throat swab specimens collected early in the outbreak (127 negative specimens, 66 specimens with pandemic [H1N1] 2009 influenza virus, 3 specimens with seasonal [H1N1] influenza A virus, and 2 specimens with seasonal [H3N2] influenza A virus). The performance characteristics of the duplex RT-PCR assay were assessed and compared to those of various detection methods: a monoplex RT-PCR assay at the National Microbiology Laboratory, a real-time RT-PCR assay using a Centers for Disease Control and Prevention protocol, an in-house multiplex RT-PCR assay (targeting influenza A virus, influenza B virus, and respiratory syncytial virus), and a rapid antigen test (the Binax Now Influenza A & B assay). The sensitivity of the duplex RT-PCR assay for influenza A virus detection was 97.2%, whereas the sensitivities were 74.6%, 71.8%, 47.8%, and 12.7% for the other four assays, respectively. The duplex RT-PCR assay was also able to identify swH1 in 94% of the cases, thereby reducing the number of specimens forwarded to reference laboratories for confirmatory identification. Only a limited number of specimens that contained influenza A virus had amounts of virus that fell below the limit of detection of the assay with the swH1 primers. Overall, the duplex RT-PCR assay is a reliable method for the simultaneous detection and confirmatory identification of pandemic (H1N1) 2009 influenza virus and would be particularly attractive to laboratories without real-time RT-PCR capabilities.
Asunto(s)
Brotes de Enfermedades , Gripe Humana , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa/métodos , Cartilla de ADN/genética , Humanos , Subtipo H1N1 del Virus de la Influenza A/clasificación , Subtipo H1N1 del Virus de la Influenza A/genética , Subtipo H1N1 del Virus de la Influenza A/aislamiento & purificación , Gripe Humana/diagnóstico , Gripe Humana/epidemiología , Gripe Humana/virología , Valor Predictivo de las Pruebas , ARN Viral/análisis , ARN Viral/aislamiento & purificación , Estaciones del Año , Sensibilidad y EspecificidadRESUMEN
Clarithromycin and azithromycin are second-generation macrolides established and widely used for treating a range of upper and lower respiratory tract infections. Extensive clinical trials data indicate that these drugs are highly effective in these applications and broadly comparable in their clinical and microbiological effectiveness. However, consideration of pharmacokinetic, metabolic, and tissue-penetration data, including the significant antibacterial activity of the metabolite 14-hydroxy-clarithromycin, plus the findings of pharmacodynamic modeling, provide evidence that the long half-life and lower potency of azithromycin predispose this agent to select for resistant isolates. Comparison of the "mutant-prevention concentrations" of clarithromycin and azithromycin, and examination of large-scale epidemiological data from Canada, also support the view that these drugs differ materially in their propensity to promote resistance among bacterial strains implicated in common respiratory infections, and that clarithromycin may offer important advantages over azithromycin that should be considered when choosing a macrolide to treat these conditions.
RESUMEN
Legionella pneumophila expresses two peroxide-scavenging alkyl hydroperoxide reductase systems (AhpC1 and AhpC2D) that are expressed differentially during the bacterial growth cycle. Functional loss of the postexponentially expressed AhpC1 system is compensated for by increased expression of the exponentially expressed AhpC2D system. In this study, we used an acrylamide capture of DNA-bound complexes (ACDC) technique and mass spectrometry to identify proteins that bind to the promoter region of the ahpC2D operon. The major protein captured was an ortholog of OxyR (OxyR(Lp)). Genetic studies indicated that oxyR(Lp) was an essential gene expressed postexponentially and only partially complemented an Escherichia coli oxyR mutant (GS077). Gel shift assays confirmed specific binding of OxyR(Lp) to ahpC2D promoter sequences, but not to promoters of ahpC1 or oxyR(Lp); however, OxyR(Lp) weakly bound to E. coli OxyR-regulated promoters (katG, oxyR, and ahpCF). DNase I protection studies showed that the OxyR(Lp) binding motif spanned the promoter and transcriptional start sequences of ahpC2 and that the protected region was unchanged by treatments with reducing agents or hydrogen peroxide (H(2)O(2)). Moreover, the OxyR(Lp) (pBADLpoxyR)-mediated repression of an ahpC2-gfp reporter construct in E. coli GS077 (the oxyR mutant) was not reversed by H(2)O(2) challenge. Alignments with other OxyR proteins revealed several amino acid substitutions predicted to ablate thiol oxidation or conformational changes required for activation. We suggest these mutations have locked OxyR(Lp) in an active DNA-binding conformation, which has permitted a divergence of function from a regulator of oxidative stress to a cell cycle regulator, perhaps controlling gene expression during postexponential differentiation.