All-Carbon Electrode Molecular Electronic Devices Based on Langmuir-Blodgett Monolayers.

Nascent molecular electronic devices, based on monolayer Langmuir-Blodgett films sandwiched between two carbonaceous electrodes, have been prepared. Tightly packed monolayers of 4-((4-((4-ethynylphenyl)ethynyl)phenyl)ethynyl)benzoic acid are deposited onto a highly oriented pyrolytic graphite electrode. An amorphous carbon top contact electrode is formed on top of the monolayer from a naphthalene precursor using the focused electron beam induced deposition technique. This allows the deposition of a carbon top-contact electrode with well-defined shape, thickness, and precise positioning on the film with nm resolution. These results represent a substantial step toward the realization of integrated molecular electronic devices based on monolayers and carbon electrodes.

Observation of the strain induced magnetic phase segregation in manganite thin films.

Epitaxial strain alters the physical properties of thin films grown on single crystal substrates. Thin film oxides are particularly apt for strain engineering new functionalities in ferroic materials. In the case of La(2/3)Ca(1/3)MnO(3) (LCMO) thin films, here we show the first experimental images obtained by electron holography demonstrating that epitaxial strain induces the segregation of a flat and uniform nonferromagnetic layer with antiferromagnetic (AFM) character at the top surface of a ferromagnetic (FM) layer, the whole film being chemical and structurally homogeneous at room temperature. For different substrates and growth conditions the tetragonality of LCMO at room temperature, defined as τ = |c - a|/a, is the driving force for a phase coexistence above an approximate critical value of τC ≈ 0.024. Theoretical calculations prove that the increased tetragonality changes the energy balance of the FM and AFM ground states in strained LCMO, enabling the formation of magnetically inhomogeneous states. This work gives the key evidence that opens a new route to synthesize strain-induced exchanged-biased FM-AFM bilayers in single thin films, which could serve as building blocks of future spintronic devices.

Enhanced magnetotransport in nanopatterned manganite nanowires.

We have combined optical and focused ion beam lithographies to produce large aspect-ratio (length-to-width >300) single-crystal nanowires of La2/3Ca1/3MnO3 that preserve their functional properties. Remarkably, an enhanced magnetoresistance value of 34% in an applied magnetic field of 0.1 T in the narrowest 150 nm nanowire is obtained. The strain release at the edges together with a destabilization of the insulating regions is proposed to account for this behavior. This opens new strategies to implement these structures in functional spintronic devices.

Conductance steps in electromigrated Bi nanoconstrictions.

Bismuth nanostructures of initial lateral size of about 150 nm were successfully electromigrated at room temperature under high vacuum conditions through the application of voltage ramps and accurate control of their conductance. The imaging of the nanogap formation was followed by scanning electron microscopy. An appropriate design of the initial Bi nanostructures has made the electromigration process of semimetallic Bi feasible. Beyond the intrinsic interest in the generation of Bi structures with size tailored at the nanoscale, remarkable features have been observed in the time-dependent conductance curves of the Bi nanoconstrictions. In particular, sub-quantum conductance plateaus can be detected before the rupture of the constriction. An alternative procedure to study the transport through Bi nanoconstrictions has been explored using a focused-Ga-ion etching process with simultaneous control of the conductance. This second approach confirms the transport behavior observed in electromigrated Bi nanoconstrictions.

Direct-write of tungsten-carbide nanoSQUIDs based on focused ion beam induced deposition.

NanoSQUIDs are quantum sensors that excel in detecting a small change in magnetic flux with high sensitivity and high spatial resolution. Here, we employ resist-free direct-write Ga+ Focused Ion Beam Induced Deposition (FIBID) techniques to grow W-C nanoSQUIDs, and we investigate their electrical response to changes in the magnetic flux. Remarkably, FIBID allows the fast (3 min) growth of 700 nm × 300 nm nanoSQUIDs based on narrow nanobridges (50 nm wide) that act as Josephson junctions. Albeit the SQUIDs exhibit a comparatively low modulation depth and obtain a high inductance, the observed transfer coefficient (output voltage to magnetic flux change) is comparable to other SQUIDs (up to 1300 µV/Φ 0), which correlates with the high resistivity of W-C in the normal state. We discuss here the potential of this approach to reduce the active area of the nanoSQUIDs to gain spatial resolution as well as their integration on cantilevers for scanning-SQUID applications.

Spin Glass State in Strained La2/3Ca1/3MnO3 Thin Films.

Epitaxial strain modifies the physical properties of thin films deposited on single-crystal substrates. In a previous work, we demonstrated that in the case of La2/3Ca1/3MnO3 thin films the strain induced by the substrate can produce the segregation of a non-ferromagnetic layer (NFL) at the top surface of ferromagnetic epitaxial La2/3Ca1/3MnO3 for a critical value of the tetragonality τ, defined as τ = |c - a|a, of τC ≈ 0.024. Although preliminary analysis suggested its antiferromagnetic nature, to date a complete characterization of the magnetic state of such an NFL has not been performed. Here, we present a comprehensive magnetic characterization of the strain-induced segregated NFL. The field-cooled magnetic hysteresis loops exhibit an exchange bias mechanism below T ≈ 80 K, which is well below the Curie temperature of the ferromagnetic La2/3Ca1/3MnO3 layer. The exchange bias and coercive fields decay exponentially with temperature, which is commonly accepted to describe spin-glass (SG) behavior. The signatures of slow dynamics were confirmed by slow spin relaxation over a wide temperature regime. Low-energy muon spectroscopy experiments directly evidence the slowing down of the magnetic moments below ~100 K in the NFL. The experimental results indicate the SG nature of the NFL. This SG state can be understood within the context of the competing ferromagnetic and antiferromagnetic interactions of similar energies.

Half-hedgehog spin textures in sub-100 nm soft magnetic nanodots.

Topologically non-trivial structures such as magnetic skyrmions are nanometric spin textures of outstanding potential for spintronic applications due to their unique features. It is well known that Néel skyrmions of definite chirality are stabilized by the Dzyaloshinskii-Moriya exchange interaction (DMI) in bulk non-centrosymmetric materials or ultrathin films with strong spin-orbit coupling at the interface. In this work, we show that soft magnetic (permalloy) hemispherical nanodots are able to host three-dimensional chiral structures (half-hedgehog spin textures) with non-zero tropological charge. They are observed at room temperature, in absence of DMI interaction and they can be further stabilized by the magnetic field arising from the Magnetic Force Microscopy probe. Micromagnetic simulations corroborate the experimental data. Our work implies the existence of a new degree of freedom to create and manipulate complex 3D spin-textures in soft magnetic nanodots and opens up future possibilities to explore their magnetization dynamics.

Focused Electron and Ion Beam Induced Deposition on Flexible and Transparent Polycarbonate Substrates.

The successful application of focused electron (and ion) beam induced deposition techniques for the growth of nanowires on flexible and transparent polycarbonate films is reported here. After minimization of charging effects in the substrate, sub-100 nm-wide Pt, W, and Co nanowires have been grown and their electrical conduction is similar compared to the use of standard Si-based substrates. Experiments where the substrate is bent in a controlled way indicate that the electrical conduction is stable up to high bending angles, >50°, for low-resistivity Pt nanowires grown by the ion beam. On the other hand, the resistance of Pt nanowires grown by the electron beam changes significantly and reversibly with the bending angle. Aided by the substrate transparency, a diffraction grating in transmission mode has been built based on the growth of an array of Pt nanowires that shows sharp diffraction spots. The set of results supports the large potential of focused beam deposition as a high-resolution nanolithography technique on transparent and flexible substrates. The most promising applications are expected in flexible nano-optics and nanoplasmonics, flexible electronics, and nanosensing.

Influence of the shape and surface oxidation in the magnetization reversal of thin iron nanowires grown by focused electron beam induced deposition.

Iron nanostructures grown by focused electron beam induced deposition (FEBID) are promising for applications in magnetic sensing, storage and logic. Such applications require a precise design and determination of the coercive field (H C), which depends on the shape of the nanostructure. In the present work, we have used the Fe2(CO)9 precursor to grow iron nanowires by FEBID in the thickness range from 10 to 45 nm and width range from 50 to 500 nm. These nanowires exhibit an Fe content between 80 and 85%, thus giving a high ferromagnetic signal. Magneto-optical Kerr characterization indicates that H C decreases for increasing thickness and width, providing a route to control the magnetization reversal field through the modification of the nanowire dimensions. Transmission electron microscopy experiments indicate that these wires have a bell-type shape with a surface oxide layer of about 5 nm. Such features are decisive in the actual value of H C as micromagnetic simulations demonstrate. These results will help to make appropriate designs of magnetic nanowires grown by FEBID.

3D Magnetic Induction Maps of Nanoscale Materials Revealed by Electron Holographic Tomography.

The investigation of three-dimensional (3D) ferromagnetic nanoscale materials constitutes one of the key research areas of the current magnetism roadmap and carries great potential to impact areas such as data storage, sensing, and biomagnetism. The properties of such nanostructures are closely connected with their 3D magnetic nanostructure, making their determination highly valuable. Up to now, quantitative 3D maps providing both the internal magnetic and electric configuration of the same specimen with high spatial resolution are missing. Here, we demonstrate the quantitative 3D reconstruction of the dominant axial component of the magnetic induction and electrostatic potential within a cobalt nanowire (NW) of 100 nm in diameter with spatial resolution below 10 nm by applying electron holographic tomography. The tomogram was obtained using a dedicated TEM sample holder for acquisition, in combination with advanced alignment and tomographic reconstruction routines. The powerful approach presented here is widely applicable to a broad range of 3D magnetic nanostructures and may trigger the progress of novel spintronic nonplanar nanodevices.

Three dimensional magnetic nanowires grown by focused electron-beam induced deposition.

Control of the motion of domain walls in magnetic nanowires is at the heart of various recently proposed three-dimensional (3D) memory devices. However, fabricating 3D nanostructures is extremely complicated using standard lithography techniques. Here we show that highly pure 3D magnetic nanowires with aspect-ratios of ~100 can be grown using focused electron-beam-induced-deposition. By combining micromanipulation, Kerr magnetometry and magnetic force microscopy, we determine that the magnetisation reversal of the wires occurs via the nucleation and propagation of domain walls. In addition, we demonstrate that the magnetic switching of individual 3D nanostructures can be directly probed by magneto-optical Kerr effect.