Ligand Screening of Membrane Proteins Embedded in Nanodiscs: How to Manage Non-Specific Interactions in Weak Affinity Chromatography?

Miniaturized weak affinity chromatography is emerging as an interesting alternative to conventional biophysical tools for performing fragment-screening studies in the context of fragment-based drug discovery. In order to push back the analytical limits, it is necessary not only to control non-specific interactions with chromatographic support, but also to adapt this methodology by comparing the results obtained on an affinity column to a control column. The work presented in this study focused on fragment screening that targets a model membrane protein, the adenosine A2A receptor, embedded in nanodiscs (NDs) as biomimetic membranes. By studying the retention behavior of test fragment mixtures on supports modified with different types of NDs, we were able to determine the contribution of ND-related non-specific interactions, in particular the electrostatic effect of anionic phospholipids and the hydrophobic effect of neutral phospholipids. Different strategies for the preparation of control columns (empty NDs, orthosteric site blocking) were investigated and are presented for the first time. With these two types of control columns, the screening enabled the identification of two new fragments of AA2AR, which were confirmed by competition experiments and whose Kd values, estimated directly during the screening or after the competition experiments in frontal mode, were in good agreement.

Extending the Affinity Range of Weak Affinity Chromatography for the Identification of Weak Ligands Targeting Membrane Proteins.

The identification of weak-affinity ligands targeting membrane proteins is of great interest in Fragment-Based Drug Design (FBDD). Recently, miniaturized weak affinity chromatography (WAC) has been proposed as a valuable tool to study interactions between small ligands and wild-type membrane proteins embedded in so-called nanodisc biomimetic membranes immobilized on GMA-co-EDMA monoliths in situ-synthesized in capillary columns (less than one microliter in volume). In this proof-of-concept study, the achievable affinity range was limited to medium affinity (low micromolar range). The present work investigates different strategies to extend the affinity range towards low affinities, either by increasing the density of membrane proteins on the chromatographic support or by reducing non-specific interactions with the monolith. The combination of the use of a new and more hydrophilic monolithic support (poly(DHPMA-co-MBA)) and a multilayer nanodisc grafting process (up to three layers) allows a significant increase in the membrane protein density by a more than three-fold factor (up to 5.4 pmol cm-1). Such an increase in protein density associated with reduced non-specific interactions makes it possible to extend the range of detectable affinity, as demonstrated by the identification and characterization of affinities of very low-affinity ligands (Kd values of several hundred micromolar) for the adenosine receptor AA2AR used as a model protein, which was not possible before. The affinity was confirmed by competition experiments.

Two Original Experimental Setups for Staircase Frontal Affinity Chromatography at the Miniaturized Scale.

Frontal affinity chromatography is a powerful, underappreciated technique for the qualitative (screening) and quantitative (Kd determination) evaluation of biological interactions. Its development has been previously hampered by its sample consumption, limited throughput, and lack of dedicated instrumentation especially at a miniaturized scale. This work describes two original experimental devices allowing nano-frontal affinity chromatography titrations (nano-FAC) to be automatically implemented in the time-saving staircase mode. The first nano-FAC system utilizes a capillary electrophoresis device (7100 CE Agilent system) in the pressurization mode with in situ UV detection. The second nano-FAC experimental setup implements a nano-LC device (Ultimate 3000 Thermo) modified with a 10-port valve equipped with two superloops (loop volume, 5 µL) operating alternatively and automatically in a single run. The benefits and drawbacks of each approach are exemplified using two model protein-ligand interactions (concanavalin A-mannose and concanavalin A-glucose). The two methods result in concordant dissociation constants (Kd) and number of active site (Bact) values, obtained in a fully automated manner, with low sample consumption and good throughput.

Towards a Non-Biased Formaldehyde Quantification in Leather: New Derivatization Conditions before HPLC Analysis of 2,4-Dinitrophenylhydrazine Derivatives.

In leathers, formaldehyde is currently analyzed according to EN ISO 17226-1 standard, by reversed phase liquid chromatography after off-line precolumn derivatization with 2,4 dinitrophenylhydrazine (DNPH) in strong acidic conditions. We first demonstrate that this standard is not adapted to leather retanned with resins likely to release formaldehyde by hydrolysis. Indeed, formaldehyde content may be largely overestimated due to concomitant resin hydrolysis (in harsh acidic conditions) that releases formaldehyde during the derivatization step and during the waiting time on autosampler before analysis. Therefore, we thoroughly studied the derivatization step in order to propose new derivatization conditions. Replacing orthophosphoric acid by less acidic buffer solutions is not enough to avoid hydrolysis. A derivatization without adding acid is realized by solubilizing DNPH in acetonitrile instead of orthophosphoric acid. These conditions lead to a complete derivatization of formaldehyde in 3 h at 50 °C (in a water bath) while avoiding the hydrolysis of co-extracted dicyandiamide and melamine resins. The as-obtained leather extracts are stable over time. Formaldehyde contents found with this method agree with the formaldehyde content measured immediately at the end of derivatization reaction in standard conditions or with formaldehyde content measured by a home-designed flow injection analysis with acetylacetone online derivatization and UV detection.

Online Separation and Identification of Isomers Using Infrared Multiple Photon Dissociation Ion Spectroscopy Coupled to Liquid Chromatography: Application to the Analysis of Disaccharides Regio-Isomers and Monosaccharide Anomers.

The vast array of molecular isomerisms which form the complex molecular structure of carbohydrates is the foundation of their biological versatility but defies the analytical chemist. Hyphenations of mass spectrometry with orthogonal structural characterization, such as ion mobility or ion spectroscopy, have recently shown great promise for distinction between closely related molecular structures. Yet, the lack of analytical strategies for identification of isomers present in mixtures remains a major obstacle to routine carbohydrate sequencing. In this context, an ideal workflow for glycomics would combine isomer separation and individual characterization of the molecular structure with atomistic resolution. Here we report the implementation of such a multidimensional analytical strategy, which consists of the first online coupling of high-performance liquid chromatography (HPLC)-MS and infrared multiple photon dissociation (IRMPD) spectroscopy. The performance of this novel workflow is exemplified in the case of monosaccharides (anomers) and disaccharides (regioisomers) standards. We report that the LC-MS-IRMPD approach offers a robust advanced MS diagnostic of mixtures of isomers, including carbohydrate anomers, which is critical for carbohydrate sequencing. Our results also explain the bimodal character generally observed in LC chromatograms of carbohydrates. More generally, this multidimensional analytical strategy opens the gateway to rapid identification of molecular isoforms with potential application in the "omics" fields.

One-pot synthesis of a new high vinyl content hybrid silica monolith dedicated to nanoliquid chromatography.

A new vinyltrimethoxysilane-based hybrid silica monolith was developed and used as a reversed-phase capillary column. The synthesis of this rich vinyl hybrid macroporous monolith, by cocondensation of vinyltrimethoxysilane with tetramethoxysilane, was investigated using an unconventional (formamide, nitric acid) porogen/catalyst system. A macroporous hybrid silica monolith with 80% in mass of vinyltrimethoxysilane in the feeding silane solution was obtained and compared to a more conventional low vinyl content hybrid monolith with only of 20% vinyltrimethoxysilane. Monoliths were characterized by scanning electron microscopy, (29) Si nuclear magnetic resonance spectroscopy and N2 adsorption-desorption. About 80% of the vinyl precursor was incorporated in the final materials, leading to 15.9 and 61.5% of Si atoms bonded to vinyl groups for 20% vinyltrimethoxysilane and 80% vinyltrimethoxysilane, respectively. The 80% vinyltrimethoxysilane monolith presents a lower surface area than 20% vinyltrimethoxysilane (159 versus 551 m(2) /g), which is nevertheless compensated by a higher vinyl surface density. Chromatographic properties were evaluated in reversed-phase mode. Plots of ln(k) versus percentage of organic modifier were used to assess the reversed-phase mechanism. Its high content of organic groups leads to high retention properties. Column efficiencies of 170 000 plates/m were measured for this 80% vinyltrimethoxysilane hybrid silica monolith. Long capillary monolithic columns (90 cm) were successfully synthesized (N = 120 000).

Synthesis and Surface Reactivity of Vinylized Macroporous Silica Monoliths: One-Pot Hybrid versus Postsynthesis Grafting Strategies.

Different synthesis routes have been implemented to prepare macroporous monoliths with vinyl pendant groups and micrometric skeletons and through-pore sizes. A standard process combining the synthesis of a widely used (methyltrimethoxysilane/tetramethoxysilane) (MTMS/TMOS) hybrid silica monolith and the postsilanization with vinyltrimethoxysilane (VTMS) was used as reference material (Vgr-MTMS). An alternative "one-pot" procedure was used to obtain vinylized hybrid monoliths. Two VTMS/TMOS hybrid based monoliths were successfully prepared starting from 20% (w) and 80% (w/w) of VTMS, respectively, called 20-VTMS and 80-VTMS. Monoliths were characterized by SEM, nitrogen-adsorption isotherm, and (29)Si MAS NMR spectroscopy. One-pot synthesis allowed to obtain higher vinyl contents (15.9 and 61.5 mol % of Si atoms bonded to vinyl groups respectively for 20-VTMS and 80-VTMS) than for the postgrafted one (7.1%). Accessibility of vinyl groups was determined by the extent of bromination reactions followed by FTIR-ATR spectroscopy. Bromination with reaction yields were higher than 80% for all materials (80%, 85%, and 100% for 80-VTMS, 20-VTMS, and Vgr-MTMS respectively), with no diffusion issues The chemical reactivity of the pendant vinyl groups was investigated through radical-mediated thiol-ene reaction and radical-initiated bisulfite addition. Reaction yields for the two VTMS hybrid monoliths were quite lower (4-6%) than those obtained (about 50%) for the Vgr-MTMS monolith. The difference in reactivity was attributed to the steric hindrance of the vinyl moieties at the surface of hybrid materials. However, the lower reactivity of vinyl groups is compensated by their considerably higher surface density. Thus, hybrid monoliths are advantageous over their grafted counterparts, due to their higher hydrolytic stability and to the greater simplicity of the one-pot process. A chromatographic application exemplifies their interest and performances in separation science.

Photografting as a versatile, localizable, and single-step surface functionalization of silica-based monoliths dedicated to microscale separation techniques.

In this work, we developed a surface functionalization way of silica monoliths with a rapid, simple, versatile, and localizable photografting step. The elaboration of a photoreactive layer at the surface of monoliths was first optimized. The functionalization with [γ-(methacryloyloxy)propyl]trimethoxysilane at 80°C in a hydro-organic solution containing triethylamine as catalyst allows reachng the highest density of methacrylate photoactive moieties on silica surfaces. These methacrylate reactive surfaces were subsequently photografted within few minutes with acrylate monomers bearing alkyl chains (C12 and C18). The photografting efficiency was determined by monitoring the retentive properties of monoliths in the RP mode. The retention factors are of the same order of magnitude as highly retentive columns obtained by modification of silica surface with long-alkyl chain silanes or by thermal polymerization of long-alkyl chain monomers. It was also verified that such grafting neither impaired the efficiency of the monolithic stationary phase (Hmin = 6-8 µm in nano-LC) nor its permeability (about 6 × 10(-14) m(2)). Further, it was also demonstrated that photografting is localizable in nonmasked defined areas. Results obtained in anion-exchange chromatography after photopolymerization of [2-(methacryloyloxy)ethyl]trimethylammonium chloride are presented as well to demonstrate the versatility of the developed approach.

Is click chemistry attractive for separation sciences?

Trends in LC focus on dedicated separation developments spanning different fields of applications ranging from sample preparation to miniaturization. Chromatographic performances result from the porous media, its implantation inside the "column," and its surface functionalization. Because molecular interactions govern chromatographic phenomena, surface functionalization is still a hot research topic. Besides standard approaches for surface functionalization, the use of new surface chemistry reactions opens new perspectives. Click chemistry belongs to this new class of chemical reactions, characterized by its specificity, compatibility with aqueous media, and high reaction yields. In this frame, we review the use of click chemistry reactions in chromatographic sciences. In a first part, we present click chemistry with a specific focus on its implementation in stationary phases. The use of these new clicked materials is detailed and discussed with respect to the chromatographic mode.

Preparation of miniaturized hydrophilic affinity monoliths: Towards a reduction of non-specific interactions and an increased target protein density.

In affinity chromatography, non-specific interactions between the ligands and the affinity column may affect the results, leading to misinterpretations during the investigation of protein-ligand interactions (detection of false positives in ligand screening, lack of specificity in purification). Such non-specific interactions may arise both from the underlying support or from the target protein itself. If the second ones are protein-dependent (and cannot be studied in a general framework), the first ones occur in the same way regardless of the immobilized target. We propose a methodology to identify the origin of such non-specific interactions with the underlying material of the affinity column. This methodology relies on the systematic investigation of the retention behavior of a set of 41 low-molecular weight compounds covering a wide chemical space (net charge, log D, functionality). We first demonstrate that the main source of non-specific interactions on the most commonly used GMA-co-EDMA monolith comes from hydrophobic effects. To reduce such non-specific interactions, we developed a new hydrophilic glycidyl methacrylate-based monolith by replacing the EDMA crosslinker by the more hydrophilic NN' Methylenebisacrylamide (MBA). Optimization of the synthesis parameters (monomer content, initiation type, temperature) has focused on the reduction of non-specific interaction with the monolithic support while maximizing the amount of protein that can be grafted onto the monolith at the issue of its synthesis. The retention data of the 41 test solutes on the new poly(GMA-co-MBA) monolith shows a drastic reduction of non-specific interactions except for cationic compounds. The particular behavior of cationic compounds is due to their electrostatic interactions with carboxylic groups resulting from the partial acidic hydrolysis of amide groups of MBA during the epoxide ring opening step. So, the ring opening step in acidic media was replaced by a hot water treatment to avoid side reaction on MBA. The new monolith poly(GMA-co-MBA) not only has improved hydrophilic surface properties but also a higher protein density (16 ± 0.8 pmol cm-1 instead of 8 ± 0.3 pmol cm-1). To highlight the benefits of this new hydrophilic monolith for affinity chromatographic studies, frontal affinity chromatography experiments were conducted on these monoliths grafted with con A.

Miniaturized affinity chromatography: A powerful technique for the isolation of high affinity GAGs sequences prior to their identification by MALDI-TOF MS.

Glycosaminoglycans (GAGS) are involved in many biological processes through interactions with a variety of proteins, including proteases, growth factors, cytokines, chemokines and adhesion molecules. Identifying druggable GAG-protein interactions for therapeutic purposes is a challenge for the analytical community. In this context, this work investigates the use of a new miniaturized monolithic affinity column (poly(GMA-co-MBA) grafted with antithrombin III (AT III)) to specifically capture and elute high affinity sequences contained in low molecular weight heparin (enoxaparin) for further on-line characterization. This miniaturized, high binding capacity affinity column allows the specific capture of high-affinity oligosaccharide chains from Enoxaparin, even at low concentrations and with a minimal consumption of AT III. In addition to purification, this elution process enables preconcentration for direct analysis by capillary zone electrophoresis. It was found that many of oligosaccharide chains in enoxaparin were eliminated and that certain chain sequences were retained and enriched. Direct coupling with MALDI-TOF MS was successfully used to further characterize the specifically retained oligosaccharides where nano-ESI-TOF MS failed. After optimization of the sample preparation and ionization parameters, direct on-line analysis was performed by applying the elution volume released from the miniaturized affinity column (≤1 µL) directly to the MALDI plate. Finally, this original miniaturized analytical workflow coupling miniaturized AT III-affinity chromatography to MALDI-TOF MS detection is able to select, enrich and detect and identify high affinity sequences (mainly DP4 in size length with a high degree of sulfation) from low molecular weight heparin samples. A more specific selection of GAG sequences can be achieved by increasing the ionic strength during the washing step of affinity chromatography. This is consistent with the known binding pattern between heparin and AT III.

Deciphering dynamic combinatorial libraries of glycoclusters with miniaturized weak affinity chromatography coupled with mass spectrometry (nano-FAC-MS).

We report an original methodology based on affinity chromatography coupled with mass spectrometry to decipher the complexity of dynamic combinatorial libraries (DCLs) of glycoclusters. Such libraries are intended to boost the design of potential therapeutic anti-infectious agents targeting Pseudomonas aeruginosa, which is responsible for numerous diseases, mostly found in hospitals as major a cause of nosocomial infections. Dynamic combinatorial chemistry provides a rapid access to an equilibrating mixture of glycocluster candidates through the formation of reversible covalent bonds under thermodynamic control. Identifying each molecule in the complex mixture overcomes challenges due to the dynamic process. Selection of glycoclusters candidates was first realized on a model lectin (Concanavalin A, ConA). Home-made affinity nanocolumns, containing covalently immobilized ConA and have volumes in the microliter range, were used to separate DCLs of glycoclusters with respect to their specific lectin binding properties under buffered aqueous conditions. Miniaturization facilitates the inline coupling with MS detection in such purely aqueous and buffered conditions and reduces target protein consumption. Monolithic lectin-affinity columns prepared by immobilization of ConA were first characterized using a known ligand. The amount of active binding immobilized lectin is 61 ± 5 pmol on 8.5-cm length column. We demonstrated the ability of our approach to evaluate individual dissociation constants of species directly in the complex mixture. The concept was then successfully applied to the screening of DCLs of more complex glycoclusters to identify (by mass spectrometry) and rank the ligands (by relative breakthrough curve delay) according to their affinity for the immobilized lectin in a single experiment.

Miniaturized antithrombin III affinity monolithic columns coupled to TOF-MS for the selective capture and release of fondaparinux a high affinity antithrombin III ligand.

This work explores the capability of antithrombin III-functionalized capillary monolithic columns (in-line coupled with MS detection) to selectively capture, release and detect high affinity binders of antithrombin III (AT III) from oligosaccharides mixtures. The in-situ characterization of home-made AT III affinity columns was done by frontal affinity chromatography coupled to MS detection using fondaparinux as model ligand. Three different preparation methods of miniaturized antithrombin III monolithic affinity columns were optimized and compared. Immobilization of antithrombin III onto Concanavalin A functionalized column is the simplest method but leads to lowest protein density. The two other methods, direct grafting on aldehyde preactivated monoliths and immobilization of biotinylated antithrombin III to streptavidin-functionalized columns, require the presence of fondaparinux to protect the heparin binding site during the grafting process. Up to 1.3 ± 0.3 pmol cm-1 of antithrombin III were immobilized with both methods. The direct coupling of such miniaturized affinity columns to MS-detection was made possible by optimization of the elution step. Ammonia (0.1 M) was chosen as an efficient and MS compatible solvent to elute fondaparinux. Finally, the complete analytical workflow (capture/elution/detection) was demonstrated to allow the selective capture and elution of fondaparinux initially contained in a complex oligosaccharide mixture with a limit of detection of 1 pmol.

Development of a multi-layering protein grafting process on miniaturized monolithic columns for weak affinity nano liquid chromatography application purposes.

Affinity chromatography is a powerful technique to identify and quantify weak ligand-protein interactions (Kd in the range of mM to 0.1µM). In some fields such as Fragment Based Drug Discovery, the detection of very weak affinities (mM) is of utmost importance since weak ligands can be good starting points for the conception of high affinity ligands. However, the identification of such weak ligands can be hampered by the limited bulk density of active target grafted onto the support. At the same time, downscaling the chromatographic column is of utmost interest when scarce and/or expensive proteins are targeted. In this context, we herein present a novel approach of protein immobilization to improve the bulk density of active protein grafted onto organic capillary monolithic columns. The proposed approach is based on the streptavidin-biotin interaction and consists of successive grafting steps of biotinylated target protein onto streptavidin layers through a multi-layering process. Concanavalin A was used as model protein. The study focuses on the optimization of the grafting conditions to maximize the amount of active protein during the multi-layering process and highlights the impact of the biotinylation ratio of the protein. It is demonstrated that a 3-layer grafting process allows to improve the bulk density of active sites by a 2-fold factor compared to a single layer. This improvement in protein density allows to increase the affinity range of this technique to the millimolar range.

Off-line coupling of capillary isotachophoresis separation to IRMPD spectroscopy for glycosaminoglycans analysis: Application to the chondroitin sulfate disaccharides model solutes.

Glycans analysis is challenging due to their immense structural diversity. Isotachophoresis was investigated as separation method for the purification of isobaric sulfated disaccharides prior to their characterization by Mass Spectrometry (MS) and tunable IR multiple photon dissociation (IRMPD). This proof of feasibility study was applied to the separation and characterization of chondroitin sulfate (CS) disaccharides. ITP separation conditions were optimized. Separation starts using a 2.5 mM chloride ions and 10 mM glycine at pH 3.2 solution as leading electrolyte and a terminating electrolyte composed of formic acid 2.5 mM and glycine 10 mM at pH 3.5. The CS disaccharides sample were prepared in the terminating electrolyte. The length of injection was also investigated in order to create longer plateau-like bands of pure solutes. This strategy was helpful for collecting fraction at such microseparation scale. Indeed, capillary ITP affords the injection of few tens of nanoliter of sample. Fractionation of the CS disaccharides mixture in isolated ITP bands and collection of solutes were successfully done using a HPC coated fused silica capillary of 1m-length and 75 µm of internal diameter. Collected fractions in a final of volume 10 µL were analyzed by CZE, tandem MS and IRMPD spectroscopy. The purity of each fraction is higher than 90% and is well-adapted to IRMPD characterization.

Miniaturized weak affinity chromatography for ligand identification of nanodiscs-embedded G-protein coupled receptors.

Biophysical techniques that enable the screening and identification of weak affinity fragments against a target protein are at the heart of Fragment Based Drug Design approaches. In the case of membrane proteins, the crucial criteria for fragment screening are low protein consumption, unbiased conformational states and rapidity because of the difficulties in obtaining sufficient amounts of stable and functionally folded proteins. Here we show for the first time that lipid-nanodisc systems (membrane-mimicking environment) and miniaturized affinity chromatography can be combined to identify specific small molecule ligands that bind to an integral membrane protein. The approach was exemplified using the AA2AR GPCR. Home-made affinity nano-columns modified with nanodiscs-embedded AA2AR (only about 1 µg of protein per column) were fully characterized by frontal chromatographic experiments. This method allows (i) to distinguish specific and unspecific ligand/receptor interactions, (ii) to assess dissociation constants, (iii) to identify the binding pocket of uncharacterized ligands using a reference compound (whose binding site is known) with competition experiments. Weak affinity ligands with Kd in the low to high micromolar range can be detected. At last, the applicability of this method was demonstrated with 6 fragments recently identified as ligands or non-ligands of AA2AR.

Development of a new in-line coupling of a miniaturized boronate affinity monolithic column with reversed-phase silica monolithic capillary column for analysis of cis-diol-containing nucleoside compounds.

In-line coupling of capillary columns is an effective means for achieving miniaturized and automated separation methods. The use of multimodal column designed to allow the direct integration of a sample preparation step to the separation column is one example. Herein we propose a novel in-line coupling at the capillary scale between a boronate affinity capillary column (µBAMC unit) and a reversed-phase separation column. This has been made possible due to the elaboration of a new and efficient µBAMC unit. A thiol-activated silica monolithic capillary column was functionalized through thiol-ene photoclick reaction. This simple and fast reaction allows to prepare stable µBAMC units having grafting densities of 1.93 ± 0.17 nmol cm-1. This grafting strategy increases the surface density by a factor 4 compared to our previous strategies and opens the frame to in-line coupling with reversed-phase capillary column. Proof of concept of the in-line coupling was done by coupling a 1-cm length µBAMC unit to a 7-cm length reversed phase capillary column. The conditions of loading, elution and separation were optimized for cis-diol nucleosides analysis (uridine, cytidine, adenosine, guanosine). A loading volume (at pH 8.5) of up to 21 hold volume (i.e 1 µl) of the µBAMC unit can be loaded without sample breakthrough. For the least retained nucleoside (uridine) a limit of detection of 50 ng mL-1 was estimated. Elution and full separation of the four nucleosides was triggered by flushing the multimodal column with an acetic acid (50 mM) / methanol (98/2, v/v) mobile phase.

Hexavalent chromium release from leather over time natural ageing vs accelerated ageing according to a multivariate approach.

European restriction limits the hexavalent chromium content to not more than 3 mg/kg in leather products. Owing to the evolution of hexavalent chromium content in leathers over time, it's difficult to guarantee the products will be harmless for consumers. The designing of an accelerated and representative artificial ageing procedure is therefore highly desirable. This article proposes a thorough study of the influence of storage conditions on the formation of hexavalent chromium in 4 bovine leathers. A factorial design of experiment was built with the following factors: temperature of 40-80 °C, relative humidity of 20-50%, presence or not of UV and exposure duration of 24-48 h. The results of these artificial ageings demonstrate that a high temperature, a dry atmosphere and the presence of light favor the formation of hexavalent chromium and that synergistic effects operate between temperature/humidity, temperature/UV and humidity/UV. At the same time, the leathers were subjected to a natural ageing for 12 months with a weekly hexavalent chromium analysis. The principal component analysis of the artificial ageing tests combined with the natural ageing tests, show that the artificial ageings 40 °C-50%RH-UV-48 h and 40 °C-20%RH-UV-24 h best simulate a natural ageing in the tannery, whatever the leather studied.

Monolith weak affinity chromatography for µg-protein-ligand interaction study.

Affinity monolith columns of 375 nL (effective length 8.5 cm, internal diameter 75 µm) were developed for protein-ligand affinity investigations needing only 3 µg of human serum albumin (HSA). To promote specific interactions and avoid non-specific ones, different combinations of monolithic supports and bio-functionalization pathways were evaluated. Silica and glycidylmethacrylate based monoliths were in-situ synthesized and grafted with HSA. Two direct grafting methods epoxy-amine and Schiff Base plus the streptavidin-biotin method were compared. The columns were evaluated by frontal analysis with ligands of known affinity for HSA. It is shown that a classical capillary electrophoresis instrument equipped with an external pressure device can be used to do weak affinity chromatography at low pressure (less than 1.2 MPa) in a fully automated way and with very low reagent consumption. The grafting pathways were compared in terms of (i) total and active amounts of immobilized protein, (ii) non-specific interactions, (iii) protein denaturation. According to these criteria, the organic monoliths combined with the streptavidin-biotin approach provided the best results. This immobilization pathway led to the highest active protein content (40 pmol of HSA per 8.5-cm column) with less than 10% non-specific interactions and 84% protein activity. The target grafting step lasts only 10 min and is UV-monitored, the UV breakthrough curve giving the exact amount of bound protein. This novel approach was validated by Kd measurements of 3 known ligands of HSA. Streptavidin generic monolith columns could be stored at 4 °C for 3 months maintaining activity. µg of a biotin modified sensitive protein could be attached to a stable streptavidin monolith for immediate interaction studies avoiding stability problems. This development was subsequently extended to another protein of higher pharmaceutical interest: the N-terminal domain of HSP90. Affinity was measured for two known ligands and determined Kd values were in accordance with the literature, proving that our technique is applicable to other proteins.