Quantification of alkenes on indoor surfaces and implications for chemical sources and sinks.

Indoor surfaces are known to support organic films, but their thickness, composition, and variability between environments remain poorly characterized. Alkenes are expected to be a significant component of these films, with the reaction with O3 being a major sink for O3 and source of airborne chemicals. Here, we present a sensitive, microscale, nanospectrophotometric method for quantifying the alkene (C=C bond) content of surface films and demonstrate its applicability in five studies relevant to indoor air chemistry. Collection efficiencies determined for a filter wipe method were ~64%, and the overall detection limit for monoalkenes was ~10 nmol m-2 . On average, painted walls and glass windows sampled across the University of Colorado Boulder campus were coated by ~4 nm thick films containing ~20% alkenes, and a simple calculation indicates that the lifetime for these alkenes due to reaction with O3 is ~1 hour, indicating that the films are highly dynamic. Measurements of alkenes in films of skin oil, pan-fried cooking oils, a terpene-containing cleaner, and on various surfaces in a closed classroom overnight (where carboxyl groups were also measured) provided insight into the effects of chemical and physical processes on film and air composition.

Evaluation of a New Reagent-Ion Source and Focusing Ion-Molecule Reactor for Use in Proton-Transfer-Reaction Mass Spectrometry.

We evaluate the performance of a new chemical ionization source called Vocus, consisting of a discharge reagent-ion source and focusing ion-molecule reactor (FIMR) for use in proton-transfer-reaction time-of-flight mass spectrometry (PTR-TOF) measurements of volatile organic compounds (VOCs) in air. The reagent ion source uses a low-pressure discharge. The FIMR consists of a glass tube with a resistive coating, mounted inside a radio frequency (RF) quadrupole. The axial electric field is used to enhance ion collision energies and limit cluster ion formation. The RF field focuses ions to the central axis of the reactor and improves the detection efficiency of product ions. Ion trajectory calculations demonstrate the mass-dependent focusing of ions and enhancement of the ion collision energy by the RF field, in particular for the lighter ions. Product ion signals are increased by a factor of 10 when the RF field is applied (5000-18 000 cps ppbv-1), improving measurement precision and detection limits while operating at very similar reaction conditions as traditional PTR instruments. Because of the high water mixing ratio in the FIMR, we observe no dependence of the sensitivity on ambient sample humidity. In this work, the Vocus is interfaced to a TOF mass analyzer with a mass resolving power up to 12 000, which allows clear separation of isobaric ions, observed at nearly every nominal mass when measuring ambient air. Measurement response times are determined for a range of ketones with saturation vapor concentrations down to 5 × 104 µg m-3 and compare favorably with previously published results for a PTR-MS instrument.