RESUMEN
Endohedral metallofullerenes (EMFs) are sub-nano carbon materials with diverse applications, yet their formation mechanism, particularly for metastable isomers, remains ambiguous. The current theoretical methods focus mainly on the most stable isomers, leading to limited predictability of metastable ones due to their low stabilities and yields. Herein, we report the successful isolation and characterization of two metastable EMFs, Sc2C2@C1(39656)-C82 and Sc2C2@C1(51383)-C84, which violate the isolated pentagon rule (IPR). These two non-IPR EMFs exhibit a rare case of planar and pennant-like Sc2C2 clusters, which can be considered hybrids of the common butterfly-shaped and linear configurations. More importantly, the theoretical results reveal that despite being metastable, these two non-IPR EMFs survived as the products from their most stable precursors, Sc2C2@C2v(5)-C80 and Sc2C2@Cs(6)-C82, via a C2 insertion during the post-formation annealing stages. We propose a systematic theoretical method for predicting metastable EMFs during the post-formation stages. The unambiguous molecular-level structural evidence, combined with the theoretical calculation results, provides valuable insights into the formation mechanisms of EMFs, shedding light on the potential of post-formation mechanisms as a promising approach for EMF synthesis.
RESUMEN
Herein, a hetero(S,N)-quintuple [9]helicene (SNQ9H) molecule with an azacorannulene core was synthesized, currently representing the highest hetero-helicene reported in the field of multiple [n]helicenes. X-ray crystallography indicated that SNQ9H includes not only a propeller-shaped conformer SNQ9H-1, but also an unforeseen quasi-propeller-shaped conformer SNQ9H-2. Different conformers were observed for the first time in multiple [n≥9]helicenes, likely owing to the doping of heteroatomic sulfurs in the helical skeletons. Remarkably, the ratio of SNQ9H-1 to SNQ9H-2 can be regulated in situ by the reaction temperature. Experimental studies on the photophysical and redox properties of SNQ9H and theoretical calculations clearly demonstrated that the electronic structures of SNQ9H depend on their molecular conformations. The strategy of introducing heteroatomic sulfurs into the helical skeleton may be useful in constructing various conformers of higher multiple [n]helicenes in the future.
RESUMEN
The combustion has long been applied for industrial synthesis of carbon materials such as fullerenes as well as carbon particles (known as carbon black), but the components and structures of the carbon soot are far from being clarified. Herein, we retrieve an unprecedented hydrofullerene C66H4 from a soot of a low-pressure combustion of benzene-acetylene-oxygen. Unambiguously characterized by single-crystal X-ray diffraction, the C66H4 renders a nonclassical geometry incorporating two heptagons and two pairs of fused pentagons in a C2 v symmetry. The common vertexes of the fused pentagons are bonded with four hydrogen atoms to convert the hydrogen-linking carbon atoms from sp2 to sp3 hybridization, which together with the adjacent heptagons essentially releases the sp2-bond strains on the abutting-pentagon sites of the diheptagonal fused pentagon C66 (dihept-C66). DFT computations suggest the possibility for an in situ hydrogenation process leading to stabilization of the dihept-C66. In addition, the experiments have been carried out to study heptagon-dependent properties of dihept-C66H4, indicating the key responsibility of the heptagon for changing hydrocarbon activity and electronic properties. The present work with the unprecedented double-heptagon-containing hydrofullerene successfully isolated and identified as one of the low-pressure combustion products shows that the heptagon is a new building block for constructing fullerene products in addition to pentagons and hexagons in low-pressure combustion systems.
RESUMEN
A general one-step synthesis of symmetrical or unsymmetrical 1,4-di(organo)fullerenes from organo(hydro)fullerenes (RC60H) is realized by direct oxidative arylation. The new combination of catalytic trifluoromethanesulfonic acid (TfOH) and stoichiometric o-chloranil is the first to be used to directly generate an R-C60+ intermediate from common RC60H. Unexpectedly, the in situ generated R-C60+ intermediate is shown to be quite stable in whole 13C NMR spectroscopy characterization in the absence of cation quenching reagents. Because the direct oxidation of common RC60H to form the corresponding R-C60+ has never been realized, the present combination of TfOH and o-chloranil solves the challenges associated with the formation of stable RC60+ cations from common RC60H without any coordination of an R group.
RESUMEN
All previously reported C70 isomers have positive curvature and contain 12 pentagons in addition to hexagons. Herein, we report a new C70 species with two negatively curved heptagon moieties and 14 pentagons. This unconventional heptafullerene[70] containing two symmetric heptagons, referred to as dihept-C70 , grows in the carbon arc by a theoretically supported pathway in which the carbon cluster of a previously reported C66 species undergoes successive C2 insertion via a known heptafullerene[68] intermediate with low energy barriers. As identified by X-ray crystallography, the occurrence of heptagons facilitates a reduction in the angle of the π-orbital axis vector in the fused pentagons to stabilize dihept-C70 . Chlorination at the intersection of a heptagon and two adjacent pentagons can greatly enlarge the HOMO-LUMO gap, which makes dihept-C70 Cl6 isolable by chromatography. The synthesis of dihept-C70 Cl6 offers precious clues with respect to the fullerene formation mechanism in the carbon-clustering process.
RESUMEN
C3N4 is widely applied in the synthesis of single-atom catalysts. However, understanding on the active site and the reaction mechanism is not fully in consensus. Especially, bare studies have considered the coordination environment of the single-atomic dopant and the effect of nitrogen vacancy on C3N4. In this study, we found that the presence of nitrogen vacancies promotes the activation of water and reduces the activation energy barrier for hydrogen generation. The results show that a synergistic effect between single-atom Pt and nitrogen vacancies enables the catalyst to achieve a superior hydrogen production rate of 3,890 µmol/g/h, which is 16.8 times higher than that of pristine C3N4. Moreover, the catalyst is also applicable for photocatalytic hydrogen production from seawater without significantly decreased hydrogen production rate. This study paves the way for the rational design and optimization of next-generation photocatalysts for sustainable energy applications, particularly in solar-driven hydrogen production.
RESUMEN
A superparamagnetic reduced graphene oxide-Fe(3)O(4) hybrid composite (rGO-Fe(3)O(4)) was prepared via a facile and straightforward method through the solvothermal reaction of iron (III) acetylacetonate (Fe(acac)(3)) and graphene oxide (GO) in ethylenediamine (EDA) and water. By this method, chemical reduction of GO as well as the formation of Fe(3)O(4) nanoparticles (NPs) can be achieved in one step. The Fe(3)O(4) NPs are firmly deposited on the surfaces of rGO, avoiding their reassembly to graphite. The rGO sheets prevent the agglomeration of Fe(3)O(4) NPs and enable a uniform dispersion of these metal oxide particles. The size distribution and coverage density of Fe(3)O(4) NPs deposited on rGO can be controlled by varying the initial mass ratio of GO and iron precursor, Fe(acac)(3). With an initial mass ratio of GO and Fe(acac)(3) of 5:5, the surfaces of rGO sheets are densely covered by spherical Fe(3)O(4) NPs with an average size of 19.9 nm. The magnetic-functionalized rGO hybrid exhibits a good magnetic property and the specific saturation magnetization (M(s)) is 13.2 emu g(-1). The adsorption test of methylene blue from aqueous solution demonstrates the potential application of this rGO-Fe(3)O(4) hybrid composite in removing organic dyes from polluted water.
Asunto(s)
Cristalización/métodos , Compuestos Férricos/química , Grafito/química , Nanopartículas del Metal/química , Nanopartículas del Metal/ultraestructura , Calor , Sustancias Macromoleculares/química , Campos Magnéticos , Ensayo de Materiales , Conformación Molecular , Óxidos/química , Tamaño de la Partícula , Solventes/química , Propiedades de SuperficieRESUMEN
Boron nitride nanotubes (BNNTs) are inappropriate for further chemical derivatization because of their chemical inertness. We demonstrate covalent activation of chemically inert BNNTs by isophorone diisocyanate (IPDI) to form isocyanate group (NCO)-terminated BNNT precursors with an 'NCO anchor' ready for further functionalization. As identified by Fourier transform infrared spectroscopy, a number of molecules or polymers with -COOH, -OH or -NH2 groups are readily attached to the activated IPDI-BNNTs. The IPDI-BNNT-involving polymer composites have shown mechanical properties are considerably improved due to the good dispersibility of IPDI-BNNTs in the polymer matrix and the strong interfacial interactions between BNNTs and polymers. The methodology reported here provides a promising method to promote the chemical reactivity of BNNTs and covalently modify polymer nanocomposites with improved mechanical performance.
RESUMEN
In the flames during low-pressure combustion, not only a rich variety of fullerenes but also many reactive intermediates can be produced (e.g., carbene, CH2) that are short-lived and cannot be stabilized directly under normal circumstances. These intermediates can be captured by fullerene carbon cages for stabilization. In this paper, three C71H2 isomers were synthesized in situ in low-pressure benzene-acetylene-oxygen diffusion flame combustion. The results, which were unambiguously characterized by single-crystal X-ray diffraction, show that the three isomers are carbene addition products of D5h-C70 on different sites. The relative energies and stability of different C71H2 isomers are revealed by Ultraviolet-Visible (UV-Vis) absorption spectroscopy, in combination with theoretical calculations, in this work. Both the in situ capture and theoretical study of these C71H2 isomers in low-pressure combustion will provide more information regarding carbene additions to other fullerenes or other carbon clusters at high temperatures.
RESUMEN
A double-heptagon-containing C70H6 (dihept-C70H6) was isolated and unambiguously characterized in the soot of low-pressure combustion, which shares the identical heptagonal cage as dihept-C70Cl6 previously identified in the products of carbon arc, and thus represents the first nonclassical fullerene isolable in both carbon arc and combustion.
RESUMEN
The assembly of spherical fullerenes, or buckyballs, into single crystals for crystallographic identification often suffers from disordered arrangement. Here we show a chiral configuration of decapyrrylcorannulene that has a concave 'palm' of corannulene and ten flexible electron-rich pyrryl group 'fingers' to mimic the smart molecular 'hands' for self-adaptably cradling various buckyballs in a (+)hand-ball-hand(-) mode. As exemplified by crystallographic identification of 15 buckyball structures representing pristine, exohedral, endohedral, dimeric and hetero-derivatization, the pyrryl groups twist with varying dihedral angles to adjust the interaction between decapyrrylcorannulene and fullerene. The self-adaptable electron-rich pyrryl groups, susceptible to methylation, are theoretically revealed to contribute more than the bowl-shaped palm of the corannulene in holding buckyball structures. The generality of the present decapyrrylcorannulene host with flexible pyrryl groups facilitates the visualization of numerous unknown/unsolved fullerenes by crystallography and the assembly of the otherwise close-packed spherical fullerenes into two-dimensional layered structures by intercalation.
RESUMEN
Carboncones, a special family of all-carbon allotropes, are predicted to have unique properties that distinguish them from fullerenes, carbon nanotubes, and graphenes. Owing to the absence of methods to synthesize atomically well-defined carboncones, however, experimental insight into the nature of pure carboncones has been inaccessible. Herein, we describe a facile synthesis of an atomically well-defined carboncone[1,2] (C70H20) and its soluble penta-mesityl derivative. Identified by x-ray crystallography, the carbon skeleton is a carboncone with the largest possible apex angle. Much of the structural strain is overcome in the final step of converting the bowl-shaped precursor into the rigid carboncone under mild reaction conditions. This work provides a research opportunity for investigations of atomically precise single-layered carboncones having even higher cone walls and/or smaller apex angles.
RESUMEN
We report a simple strategy to construct a multiple gadolinium complex decorated fullerene (CGDn) as an enhanced T1 contrast agent. The CGDn exhibits much higher T1 relaxivity (â¼49.7 mM(-1) s(-1)) than individual Gd-DOTA, and shows excellent T1 contrast enhancement ability both in vitro and in vivo.
Asunto(s)
Medios de Contraste/química , Complejos de Coordinación/química , Fulerenos/química , Gadolinio/química , Animales , Corazón/diagnóstico por imagen , Compuestos Heterocíclicos/química , Imagen por Resonancia Magnética , Compuestos Organometálicos/química , Radiografía , Ratas , Ratas Sprague-DawleyRESUMEN
Highly efficient and stable photoluminescence (PL) are urgently desired for graphene quantum dots (GQDs) to facilitate their prospective applications as optical materials. Here, we report the facile and straightforward synthesis of alkylated graphene quantum dots (AGQDs) via the solvothermal reaction of propagatively alkylated graphene sheets (PAGenes). In contrast to most GQDs reported so far, the synthesized AGQDs process pH-independent and ultra-bright PL with a relative quantum yield of up to 65%. Structural and chemical composition characterization demonstrated that the synthesized AGQDs are nearly oxygen-defect-free with alkyl groups decorated on edges and basal plane, which may contribute to their greatly improved pH tolerance and high quantum efficiency. The photocatalytic performance of AGQDs-P25 nanocomposites was evaluated by the degradation of Rhodamine B under visible light. The photocatalytic rate is ca. 5.9 times higher than that of pure P25, indicating that AGQDs could harness the visible spectrum of sunlight for energy conversion or environmental therapy.